[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-stable] Patch Round-up for stable 1.7.1, freeze on 2013-02-27
From: |
Michael Roth |
Subject: |
[Qemu-stable] Patch Round-up for stable 1.7.1, freeze on 2013-02-27 |
Date: |
Fri, 21 Feb 2014 02:16:36 -0600 |
Hi everyone,
The following new patches are queued for QEMU stable v1.7.1:
https://github.com/mdroth/qemu/commits/stable-1.7-staging
The release is planned for 2014-03-03:
http://wiki.qemu.org/Planning/1.7
Please respond here or CC address@hidden on any patches you
think should be included in the release. The cut-off date has
been extended to 2013-02-27 due to the round-up email going
out late.
Testing/feedback is greatly appreciated.
Thanks!
Alex Williamson (1):
vfio-pci: Release all MSI-X vectors when disabled
Alexander Graf (1):
x86: only allow real mode to access 32bit without LMA
Aurelien Jarno (1):
tcg/optimize: fix known-zero bits for right shift ops
Brad (1):
Fix QEMU build on OpenBSD on x86 archs
Corey Bryant (1):
seccomp: exit if seccomp_init() fails
Cornelia Huck (1):
s390x/kvm: Fix diagnose handling.
Eric Farman (2):
virtio-scsi: Cleanup of I/Os that never started
virtio-scsi: Prevent assertion on missed events
Gerd Hoffmann (2):
intel-hda: fix position buffer
piix: fix 32bit pci hole
Huw Davies (1):
tcg-arm: The shift count of op_rotl_i32 is in args[2] not args[1].
Laszlo Ersek (1):
qemu_opts_parse(): always check return value
Luiz Capitulino (1):
migration: qmp_migrate(): keep working after syntax error
Marcel Apfelbaum (2):
memory.c: bugfix - ref counting mismatch in memory_region_find
exec: separate sections and nodes per address space
Mark Cave-Ayland (1):
Update OpenBIOS images
Markus Armbruster (1):
qdev-monitor: Avoid device_add crashing on non-device driver name
Matthew Garrett (1):
migration: Fix rate limit
Michael S. Tsirkin (4):
exec: replace leaf with skip
exec: pass hw address to phys_page_find
pc: map PCI address space as catchall region for not mapped addresses
hpet: fix build with CONFIG_HPET off
Paolo Bonzini (19):
virtio-ccw: move virtio_ccw_stop_ioeventfd to virtio_ccw_busdev_unplug
virtio-bus: remove vdev field
virtio-ccw: remove vdev field
virtio-pci: remove vdev field
virtio-bus: cleanup plug/unplug interface
virtio-blk: switch exit callback to VirtioDeviceClass
virtio-serial: switch exit callback to VirtioDeviceClass
virtio-net: switch exit callback to VirtioDeviceClass
virtio-scsi: switch exit callback to VirtioDeviceClass
virtio-balloon: switch exit callback to VirtioDeviceClass
virtio-rng: switch exit callback to VirtioDeviceClass
virtio-pci: add device_unplugged callback
scsi-bus: fix transfer length and direction for VERIFY command
scsi-disk: fix VERIFY emulation
vl: add missing transition debug->finish_migrate
split definitions for exec.c and translate-all.c radix trees
scsi: Support TEST UNIT READY in the dummy LUN0
scsi: Assign cancel_io vector for scsi_disk_emulate_ops
memory: fix limiting of translation at a page boundary
Petar Jovanovic (3):
target-mips: fix 64-bit FPU config for user-mode emulation
linux-user: pass correct parameter to do_shmctl()
linux-user: create target_structs header to place ipc_perm and shmid_ds
Peter Crosthwaite (1):
qom: Split out object and class caches
Peter Lieven (1):
block/iscsi: use a bh to schedule co reentrance
Peter Maydell (1):
block/curl: Implement the libcurl timer callback interface
Stefan Weil (3):
mainstone: Fix duplicate array values for key 'space'
i386: Add missing include file for QEMU_PACKED
linux-user: Fix trampoline code for CRIS
thomas knych (1):
KVM: Retry KVM_CREATE_VM on EINTR
block/curl.c | 81 +++++++++--
block/iscsi.c | 11 +-
configure | 7 +
exec.c | 230 ++++++++++++++++----------------
hw/arm/mainstone.c | 13 +-
hw/audio/intel-hda.c | 1 +
hw/block/virtio-blk.c | 10 +-
hw/char/virtio-serial-bus.c | 10 +-
hw/i386/bios-linker-loader.c | 3 +-
hw/i386/pc.c | 20 +--
hw/i386/pc_piix.c | 1 -
hw/misc/vfio.c | 12 ++
hw/net/virtio-net.c | 11 +-
hw/pci-host/piix.c | 37 +----
hw/pci-host/q35.c | 27 +---
hw/s390x/virtio-ccw.c | 83 +++++++-----
hw/s390x/virtio-ccw.h | 1 -
hw/scsi/scsi-bus.c | 16 ++-
hw/scsi/scsi-disk.c | 27 +++-
hw/scsi/vhost-scsi.c | 11 +-
hw/scsi/virtio-scsi.c | 21 +--
hw/timer/hpet.c | 6 -
hw/virtio/virtio-balloon.c | 10 +-
hw/virtio/virtio-bus.c | 80 ++++++-----
hw/virtio/virtio-mmio.c | 9 +-
hw/virtio/virtio-pci.c | 122 ++++++++++-------
hw/virtio/virtio-pci.h | 1 -
hw/virtio/virtio-rng.c | 10 +-
hw/virtio/virtio.c | 7 +-
include/hw/i386/pc.h | 15 +--
include/hw/pci-host/q35.h | 2 -
include/hw/timer/hpet.h | 10 +-
include/hw/virtio/virtio-bus.h | 22 ++-
include/hw/virtio/virtio-scsi.h | 2 +-
include/hw/virtio/virtio.h | 1 +
include/qom/object.h | 3 +-
kvm-all.c | 12 +-
linux-user/aarch64/target_structs.h | 58 ++++++++
linux-user/alpha/target_structs.h | 48 +++++++
linux-user/arm/target_structs.h | 52 ++++++++
linux-user/cris/target_structs.h | 58 ++++++++
linux-user/i386/target_structs.h | 58 ++++++++
linux-user/m68k/target_structs.h | 58 ++++++++
linux-user/microblaze/target_structs.h | 58 ++++++++
linux-user/mips/target_structs.h | 48 +++++++
linux-user/mips64/target_cpu.h | 18 +++
linux-user/mips64/target_structs.h | 2 +
linux-user/openrisc/target_structs.h | 58 ++++++++
linux-user/ppc/target_structs.h | 60 +++++++++
linux-user/qemu.h | 1 +
linux-user/s390x/target_structs.h | 63 +++++++++
linux-user/sh4/target_structs.h | 58 ++++++++
linux-user/signal.c | 8 +-
linux-user/sparc/target_structs.h | 63 +++++++++
linux-user/sparc64/target_structs.h | 58 ++++++++
linux-user/syscall.c | 78 ++++-------
linux-user/unicore32/target_structs.h | 58 ++++++++
linux-user/x86_64/target_structs.h | 58 ++++++++
memory.c | 1 +
migration.c | 3 +-
pc-bios/QEMU,tcx.bin | Bin 1242 -> 1410 bytes
pc-bios/README | 2 +-
pc-bios/openbios-ppc | Bin 729880 -> 729912 bytes
pc-bios/openbios-sparc32 | Bin 381488 -> 381512 bytes
pc-bios/openbios-sparc64 | Bin 1598328 -> 1598376 bytes
pc-bios/optionrom/Makefile | 3 +-
qdev-monitor.c | 2 +-
qemu-seccomp.c | 1 +
qom/object.c | 13 +-
roms/openbios | 2 +-
target-i386/helper.c | 6 +
target-mips/translate.c | 7 +-
target-s390x/cpu.h | 3 +
target-s390x/kvm.c | 19 ++-
tcg/arm/tcg-target.c | 2 +-
tcg/optimize.c | 19 ++-
translate-all.c | 32 +++--
translate-all.h | 7 -
vl.c | 8 +-
79 files changed, 1583 insertions(+), 513 deletions(-)
create mode 100644 linux-user/aarch64/target_structs.h
create mode 100644 linux-user/alpha/target_structs.h
create mode 100644 linux-user/arm/target_structs.h
create mode 100644 linux-user/cris/target_structs.h
create mode 100644 linux-user/i386/target_structs.h
create mode 100644 linux-user/m68k/target_structs.h
create mode 100644 linux-user/microblaze/target_structs.h
create mode 100644 linux-user/mips/target_structs.h
create mode 100644 linux-user/mips64/target_structs.h
create mode 100644 linux-user/openrisc/target_structs.h
create mode 100644 linux-user/ppc/target_structs.h
create mode 100644 linux-user/s390x/target_structs.h
create mode 100644 linux-user/sh4/target_structs.h
create mode 100644 linux-user/sparc/target_structs.h
create mode 100644 linux-user/sparc64/target_structs.h
create mode 100644 linux-user/unicore32/target_structs.h
create mode 100644 linux-user/x86_64/target_structs.h
- [Qemu-stable] Patch Round-up for stable 1.7.1, freeze on 2013-02-27,
Michael Roth <=
- [Qemu-stable] [PATCH 02/51] virtio-bus: remove vdev field, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 01/51] virtio-ccw: move virtio_ccw_stop_ioeventfd to virtio_ccw_busdev_unplug, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 03/51] virtio-ccw: remove vdev field, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 04/51] virtio-pci: remove vdev field, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 07/51] virtio-serial: switch exit callback to VirtioDeviceClass, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 05/51] virtio-bus: cleanup plug/unplug interface, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 08/51] virtio-net: switch exit callback to VirtioDeviceClass, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 10/51] virtio-balloon: switch exit callback to VirtioDeviceClass, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 09/51] virtio-scsi: switch exit callback to VirtioDeviceClass, Michael Roth, 2014/02/21
- [Qemu-stable] [PATCH 11/51] virtio-rng: switch exit callback to VirtioDeviceClass, Michael Roth, 2014/02/21