[PATCH v13 3/7] s390x/cpu_topology: resetting the Topology-Change-Report

[Pierre Morel]

During a subsystem reset the Topology-Change-Report is cleared
by the machine.
Let's ask KVM to clear the Modified Topology Change Report (MTCR)
bit of the SCA in the case of a subsystem reset.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
---
 target/s390x/cpu.h           |  1 +
 target/s390x/kvm/kvm_s390x.h |  1 +
 hw/s390x/cpu-topology.c      | 12 ++++++++++++
 hw/s390x/s390-virtio-ccw.c   |  1 +
 target/s390x/cpu-sysemu.c    | 13 +++++++++++++
 target/s390x/kvm/kvm.c       | 17 +++++++++++++++++
 6 files changed, 45 insertions(+)

diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
index 729ace321a..bc1a7de932 100644
--- a/target/s390x/cpu.h
+++ b/target/s390x/cpu.h
@@ -853,6 +853,7 @@ void s390_enable_css_support(S390CPU *cpu);
 void s390_do_cpu_set_diag318(CPUState *cs, run_on_cpu_data arg);
 int s390_assign_subch_ioeventfd(EventNotifier *notifier, uint32_t sch_id,
                                 int vq, bool assign);
+void s390_cpu_topology_reset(void);
 #ifndef CONFIG_USER_ONLY
 unsigned int s390_cpu_set_state(uint8_t cpu_state, S390CPU *cpu);
 #else
diff --git a/target/s390x/kvm/kvm_s390x.h b/target/s390x/kvm/kvm_s390x.h
index f9785564d0..649dae5948 100644
--- a/target/s390x/kvm/kvm_s390x.h
+++ b/target/s390x/kvm/kvm_s390x.h
@@ -47,5 +47,6 @@ void kvm_s390_crypto_reset(void);
 void kvm_s390_restart_interrupt(S390CPU *cpu);
 void kvm_s390_stop_interrupt(S390CPU *cpu);
 void kvm_s390_set_diag318(CPUState *cs, uint64_t diag318_info);
+int kvm_s390_topology_set_mtcr(uint64_t attr);
 
 #endif /* KVM_S390X_H */
diff --git a/hw/s390x/cpu-topology.c b/hw/s390x/cpu-topology.c
index b3e59873f6..f54afcf550 100644
--- a/hw/s390x/cpu-topology.c
+++ b/hw/s390x/cpu-topology.c
@@ -118,6 +118,17 @@ static Property s390_topology_properties[] = {
     DEFINE_PROP_END_OF_LIST(),
 };
 
+/**
+ * s390_topology_reset:
+ * @dev: the device
+ *
+ * Calls the sysemu topology reset
+ */
+static void s390_topology_reset(DeviceState *dev)
+{
+    s390_cpu_topology_reset();
+}
+
 /**
  * topology_class_init:
  * @oc: Object class
@@ -133,6 +144,7 @@ static void topology_class_init(ObjectClass *oc, void *data)
     dc->unrealize = s390_topology_unrealize;
     device_class_set_props(dc, s390_topology_properties);
     set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+    dc->reset = s390_topology_reset;
 }
 
 static const TypeInfo cpu_topology_info = {
diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
index 8971ffb871..f03a5aaeea 100644
--- a/hw/s390x/s390-virtio-ccw.c
+++ b/hw/s390x/s390-virtio-ccw.c
@@ -109,6 +109,7 @@ static const char *const reset_dev_types[] = {
     "s390-flic",
     "diag288",
     TYPE_S390_PCI_HOST_BRIDGE,
+    TYPE_S390_CPU_TOPOLOGY,
 };
 
 static void subsystem_reset(void)
diff --git a/target/s390x/cpu-sysemu.c b/target/s390x/cpu-sysemu.c
index 948e4bd3e0..e27864c5f5 100644
--- a/target/s390x/cpu-sysemu.c
+++ b/target/s390x/cpu-sysemu.c
@@ -306,3 +306,16 @@ void s390_do_cpu_set_diag318(CPUState *cs, run_on_cpu_data 
arg)
         kvm_s390_set_diag318(cs, arg.host_ulong);
     }
 }
+
+void s390_cpu_topology_reset(void)
+{
+    int ret;
+
+    if (kvm_enabled()) {
+        ret = kvm_s390_topology_set_mtcr(0);
+        if (ret) {
+            error_report("Failed to set Modified Topology Change Report: %s",
+                         strerror(-ret));
+        }
+    }
+}
diff --git a/target/s390x/kvm/kvm.c b/target/s390x/kvm/kvm.c
index 7dc96f3663..5b6383eab0 100644
--- a/target/s390x/kvm/kvm.c
+++ b/target/s390x/kvm/kvm.c
@@ -2593,6 +2593,23 @@ int kvm_s390_get_zpci_op(void)
     return cap_zpci_op;
 }
 
+int kvm_s390_topology_set_mtcr(uint64_t attr)
+{
+    struct kvm_device_attr attribute = {
+        .group = KVM_S390_VM_CPU_TOPOLOGY,
+        .attr  = attr,
+    };
+
+    if (!s390_has_feat(S390_FEAT_CONFIGURATION_TOPOLOGY)) {
+        return 0;
+    }
+    if (!kvm_vm_check_attr(kvm_state, KVM_S390_VM_CPU_TOPOLOGY, attr)) {
+        return -ENOTSUP;
+    }
+
+    return kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attribute);
+}
+
 void kvm_arch_accel_class_init(ObjectClass *oc)
 {
 }
-- 
2.31.1