[PATCH v3 0/4] s390x: CPU Topology

[Pierre Morel]

Hi,

This series is a first part of the implementation of CPU topology
for S390 greatly reduced from the first spin.

In particular, we reduced the scope to the S390x specificities, removing
all code touching to SMP or NUMA, with the goal to:
- facilitate review and acceptance
- let for later the SMP part currently actively discussed in mainline
- be able despite the reduction of code to handle CPU topology for S390
  using the current S390 topology provided by QEMU with cores and sockets
  only.

To use these patches, you will need the Linux series version 4.
You find it there:
https://lkml.org/lkml/2021/9/16/576

Currently this code is for KVM only, I have no idea if it is interesting
to provide a TCG patch. If ever it will be done in another series.

A short introduction
====================

CPU Topology is described in the S390 POP with essentially the description
of two instructions:

PTF Perform Topology function used to poll for topology change
    and used to set the polarization but this part is not part of this item.

STSI Store System Information and the SYSIB 15.1.x providing the Topology
    configuration.

S390 Topology is a 6 levels hierarchical topology with up to 5 level
    of containers. The last topology level, specifying the CPU cores.

    This patch series only uses the two lower levels sockets and cores.
    
    To get the information on the topology, S390 provides the STSI
    instruction, which stores a structures providing the list of the
    containers used in the Machine topology: the SYSIB.
    A selector within the STSI instruction allow to chose how many topology
    levels will be provide in the SYSIB.

    Using the Topology List Entries (TLE) provided inside the SYSIB we
    the Linux kernel is able to compute the information about the cache
    distance between two cores and can use this information to take
    scheduling decisions.

Note:
-----
     Z15 reports 3 levels of containers, drawers, book, sockets as
     Container-TLEs above the core description inside CPU-TLEs.

The Topology can be seen at several places inside zLinux:
    - sysfs: /sys/devices/system/cpu/cpuX/topology
    - procfs: /proc/sysinfo and /proc/cpuinfo
    - lscpu -e : gives toplogy information

The different Topology levels have names:
    - Node - Drawer - Book - sockets or physical package - core

Threads:
    Multithreading, is not part of the topology as described by the
    SYSIB 15.1.x

The interest of the guest to know the CPU topology is obviously to be
able to optimise the load balancing and the migration of threads.
KVM will have the same interest concerning vCPUs scheduling and cache
optimisation.


The design
==========

1) To be ready for hotplug, I chose an Object oriented design
of the topology containers:
- A node is a bridge on the SYSBUS and defines a "node bus"
- A drawer is hotplug on the "node bus"
- A book on the "drawer bus"
- A socket on the "book bus"
- And the CPU Topology List Entry (CPU-TLE)sits on the socket bus.
These objects will be enhanced with the cache information when
NUMA is implemented.

This also allows for easy retrieval when building the different SYSIB
for Store Topology System Information (STSI)

2) Perform Topology Function (PTF) instruction is made available to the
guest with a new KVM capability and intercepted in QEMU, allowing the
guest to pool for topology changes.


Features and TBD list
=====================

- There is no direct match between IDs shown by:
    - lscpu (unrelated numbered list),
    - SYSIB 15.1.x (topology ID)

- The CPU number, left column of lscpu, is used to reference a CPU
    by Linux tools
    While the CPU address is used by QEMU for hotplug.

- Effect of -smp parsing on the topology with an example:
    -smp 9,sockets=4,cores=4,maxcpus=16

    We have 4 socket each holding 4 cores so that we have a maximum 
    of 16 CPU, 9 of them are active on boot. (Should be obvious)

# lscpu -e
CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED POLARIZATION 
ADDRESS
  0    0      0    0      0    0 0:0:0:0            yes yes        horizontal   0
  1    0      0    0      0    1 1:1:1:1            yes yes        horizontal   
1
  2    0      0    0      0    2 2:2:2:2            yes yes        horizontal   
2
  3    0      0    0      0    3 3:3:3:3            yes yes        horizontal   
3
  4    0      0    0      1    4 4:4:4:4            yes yes        horizontal   
4
  5    0      0    0      1    5 5:5:5:5            yes yes        horizontal   
5
  6    0      0    0      1    6 6:6:6:6            yes yes        horizontal   
6
  7    0      0    0      1    7 7:7:7:7            yes yes        horizontal   
7
  8    0      0    0      2    8 8:8:8:8            yes yes        horizontal   
8
# 


- To plug a new CPU inside the topology one can simply use the CPU
    address like in:
  
(qemu) device_add host-s390x-cpu,core-id=12
# lscpu -e
CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED POLARIZATION 
ADDRESS
  0    0      0    0      0    0 0:0:0:0            yes yes        horizontal   0
  1    0      0    0      0    1 1:1:1:1            yes yes        horizontal   
1
  2    0      0    0      0    2 2:2:2:2            yes yes        horizontal   
2
  3    0      0    0      0    3 3:3:3:3            yes yes        horizontal   
3
  4    0      0    0      1    4 4:4:4:4            yes yes        horizontal   
4
  5    0      0    0      1    5 5:5:5:5            yes yes        horizontal   
5
  6    0      0    0      1    6 6:6:6:6            yes yes        horizontal   
6
  7    0      0    0      1    7 7:7:7:7            yes yes        horizontal   
7
  8    0      0    0      2    8 8:8:8:8            yes yes        horizontal   
8
  9    -      -    -      -    - :::                 no yes        horizontal   
12
# chcpu -e 9
CPU 9 enabled
# lscpu -e
CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2d:L2i ONLINE CONFIGURED POLARIZATION 
ADDRESS
  0    0      0    0      0    0 0:0:0:0            yes yes        horizontal   0
  1    0      0    0      0    1 1:1:1:1            yes yes        horizontal   
1
  2    0      0    0      0    2 2:2:2:2            yes yes        horizontal   
2
  3    0      0    0      0    3 3:3:3:3            yes yes        horizontal   
3
  4    0      0    0      1    4 4:4:4:4            yes yes        horizontal   
4
  5    0      0    0      1    5 5:5:5:5            yes yes        horizontal   
5
  6    0      0    0      1    6 6:6:6:6            yes yes        horizontal   
6
  7    0      0    0      1    7 7:7:7:7            yes yes        horizontal   
7
  8    0      0    0      2    8 8:8:8:8            yes yes        horizontal   
8
  9    0      0    0      3    9 9:9:9:9            yes yes        horizontal   
12
#

It is up to the admin level, Libvirt for example, to pin the righ CPU to the 
right
vCPU, but as we can see without NUMA, chosing separate sockets for CPUs is not 
easy
without hotplug because without information the code will assign the vCPU and 
fill
the sockets one after the other.
Note that this is also the default behavior on the LPAR.

Conclusion
==========

This patch, together with the associated KVM patch allows to provide CPU 
topology
information to the guest.
Currently, only dedicated vCPU and CPU are supported and a NUMA topology can 
only
be handled using CPU hotplug inside the guest.

Next extensions are to provide:
- Topology information change for shared CPU
- NUMA using the -numa QEMU parameter.

Regards,
Pierre

Pierre Morel (4):
  linux-headers update
  s390x: kvm: topology: interception of PTF instruction
  s390x: topology: CPU topology objects and structures
  s390x: topology: implementating Store Topology System Information

 hw/s390x/cpu-topology.c            | 353 +++++++++++++++++++++++++++++
 hw/s390x/meson.build               |   1 +
 hw/s390x/s390-virtio-ccw.c         |  40 ++++
 include/hw/s390x/cpu-topology.h    |  67 ++++++
 include/hw/s390x/s390-virtio-ccw.h |   6 +
 linux-headers/linux/kvm.h          |   1 +
 target/s390x/cpu.h                 |  47 ++++
 target/s390x/kvm/kvm.c             | 116 ++++++++++
 8 files changed, 631 insertions(+)
 create mode 100644 hw/s390x/cpu-topology.c
 create mode 100644 include/hw/s390x/cpu-topology.h

-- 
2.25.1