[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v5 03/18] s390x: protvirt: Add diag308 subcodes 8 - 10
From: |
Janosch Frank |
Subject: |
[PATCH v5 03/18] s390x: protvirt: Add diag308 subcodes 8 - 10 |
Date: |
Wed, 26 Feb 2020 07:20:23 -0500 |
For diag308 subcodes 8 - 10 we have a new ipib of type 5. The ipib
holds the address and length of the secure execution header, as well
as a list of guest components.
Each component is a block of memory, for example kernel or initrd,
which needs to be decrypted by the Ultravisor in order to run a
protected VM. The secure execution header instructs the Ultravisor on
how to handle the protected VM and its components.
Subcodes 8 and 9 are similiar to 5 and 6 and subcode 10 will finally
start the protected guest.
Subcodes 8-10 are not valid in protected mode, we have to do a subcode
3 and then the 8 and 10 combination for a protected reboot.
Signed-off-by: Janosch Frank <address@hidden>
---
hw/s390x/ipl.c | 47 ++++++++++++++++++++++++++++++++++++++++++---
hw/s390x/ipl.h | 31 ++++++++++++++++++++++++++++++
target/s390x/diag.c | 27 +++++++++++++++++++++++---
3 files changed, 99 insertions(+), 6 deletions(-)
diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index 42e21e7a6a..a017b3edda 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -538,15 +538,55 @@ static bool is_virtio_scsi_device(IplParameterBlock *iplb)
return is_virtio_ccw_device_of_type(iplb, VIRTIO_ID_SCSI);
}
+int s390_ipl_pv_check_components(IplParameterBlock *iplb)
+{
+ int i;
+ IPLBlockPV *ipib_pv = &iplb->pv;
+
+ if (ipib_pv->num_comp == 0) {
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ipib_pv->num_comp; i++) {
+ /* Addr must be 4k aligned */
+ if (ipib_pv->components[i].addr & ~TARGET_PAGE_MASK) {
+ return -EINVAL;
+ }
+
+ /* Tweak prefix is monotonously increasing with each component */
+ if (i < ipib_pv->num_comp - 1 &&
+ ipib_pv->components[i].tweak_pref >
+ ipib_pv->components[i + 1].tweak_pref) {
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
void s390_ipl_update_diag308(IplParameterBlock *iplb)
{
S390IPLState *ipl = get_ipl_device();
- ipl->iplb = *iplb;
- ipl->iplb_valid = true;
+ if (iplb->pbt == S390_IPL_TYPE_PV) {
+ ipl->iplb_pv = *iplb;
+ ipl->iplb_valid_pv = true;
+ } else {
+ ipl->iplb = *iplb;
+ ipl->iplb_valid = true;
+ }
ipl->netboot = is_virtio_net_device(iplb);
}
+IplParameterBlock *s390_ipl_get_iplb_secure(void)
+{
+ S390IPLState *ipl = get_ipl_device();
+
+ if (!ipl->iplb_valid_pv) {
+ return NULL;
+ }
+ return &ipl->iplb_pv;
+}
+
IplParameterBlock *s390_ipl_get_iplb(void)
{
S390IPLState *ipl = get_ipl_device();
@@ -561,7 +601,8 @@ void s390_ipl_reset_request(CPUState *cs, enum s390_reset
reset_type)
{
S390IPLState *ipl = get_ipl_device();
- if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL) {
+ if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL ||
+ reset_type == S390_RESET_PV) {
/* use CPU 0 for full resets */
ipl->reset_cpu_index = 0;
} else {
diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
index d4813105db..3c4bb66eda 100644
--- a/hw/s390x/ipl.h
+++ b/hw/s390x/ipl.h
@@ -15,6 +15,23 @@
#include "cpu.h"
#include "hw/qdev-core.h"
+struct IPLBlockPVComp {
+ uint64_t tweak_pref;
+ uint64_t addr;
+ uint64_t size;
+} QEMU_PACKED;
+typedef struct IPLBlockPVComp IPLBlockPVComp;
+
+struct IPLBlockPV {
+ uint8_t reserved[87];
+ uint8_t version;
+ uint32_t num_comp;
+ uint64_t pv_header_addr;
+ uint64_t pv_header_len;
+ struct IPLBlockPVComp components[];
+} QEMU_PACKED;
+typedef struct IPLBlockPV IPLBlockPV;
+
struct IplBlockCcw {
uint8_t reserved0[85];
uint8_t ssid;
@@ -71,6 +88,7 @@ union IplParameterBlock {
union {
IplBlockCcw ccw;
IplBlockFcp fcp;
+ IPLBlockPV pv;
IplBlockQemuScsi scsi;
};
} QEMU_PACKED;
@@ -84,9 +102,11 @@ union IplParameterBlock {
typedef union IplParameterBlock IplParameterBlock;
int s390_ipl_set_loadparm(uint8_t *loadparm);
+int s390_ipl_pv_check_components(IplParameterBlock *iplb);
void s390_ipl_update_diag308(IplParameterBlock *iplb);
void s390_ipl_prepare_cpu(S390CPU *cpu);
IplParameterBlock *s390_ipl_get_iplb(void);
+IplParameterBlock *s390_ipl_get_iplb_secure(void);
enum s390_reset {
/* default is a reset not triggered by a CPU e.g. issued by QMP */
@@ -94,6 +114,7 @@ enum s390_reset {
S390_RESET_REIPL,
S390_RESET_MODIFIED_CLEAR,
S390_RESET_LOAD_NORMAL,
+ S390_RESET_PV,
};
void s390_ipl_reset_request(CPUState *cs, enum s390_reset reset_type);
void s390_ipl_get_reset_request(CPUState **cs, enum s390_reset *reset_type);
@@ -133,6 +154,7 @@ struct S390IPLState {
/*< private >*/
DeviceState parent_obj;
IplParameterBlock iplb;
+ IplParameterBlock iplb_pv;
QemuIplParameters qipl;
uint64_t start_addr;
uint64_t compat_start_addr;
@@ -140,6 +162,7 @@ struct S390IPLState {
uint64_t compat_bios_start_addr;
bool enforce_bios;
bool iplb_valid;
+ bool iplb_valid_pv;
bool netboot;
/* reset related properties don't have to be migrated or reset */
enum s390_reset reset_type;
@@ -161,9 +184,11 @@ QEMU_BUILD_BUG_MSG(offsetof(S390IPLState, iplb) & 3,
"alignment of iplb wrong");
#define S390_IPL_TYPE_FCP 0x00
#define S390_IPL_TYPE_CCW 0x02
+#define S390_IPL_TYPE_PV 0x05
#define S390_IPL_TYPE_QEMU_SCSI 0xff
#define S390_IPLB_HEADER_LEN 8
+#define S390_IPLB_MIN_PV_LEN 148
#define S390_IPLB_MIN_CCW_LEN 200
#define S390_IPLB_MIN_FCP_LEN 384
#define S390_IPLB_MIN_QEMU_SCSI_LEN 200
@@ -185,4 +210,10 @@ static inline bool iplb_valid_fcp(IplParameterBlock *iplb)
iplb->pbt == S390_IPL_TYPE_FCP;
}
+static inline bool iplb_valid_pv(IplParameterBlock *iplb)
+{
+ return be32_to_cpu(iplb->len) >= S390_IPLB_MIN_PV_LEN &&
+ iplb->pbt == S390_IPL_TYPE_PV;
+}
+
#endif
diff --git a/target/s390x/diag.c b/target/s390x/diag.c
index b5aec06d6b..d6ceb1f75d 100644
--- a/target/s390x/diag.c
+++ b/target/s390x/diag.c
@@ -52,6 +52,8 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, uint64_t
r3)
#define DIAG_308_RC_OK 0x0001
#define DIAG_308_RC_NO_CONF 0x0102
#define DIAG_308_RC_INVALID 0x0402
+#define DIAG_308_RC_NO_PV_CONF 0x0a02
+#define DIAG_308_RC_INVAL_FOR_PV 0x0b02
#define DIAG308_RESET_MOD_CLR 0
#define DIAG308_RESET_LOAD_NORM 1
@@ -59,6 +61,9 @@ int handle_diag_288(CPUS390XState *env, uint64_t r1, uint64_t
r3)
#define DIAG308_LOAD_NORMAL_DUMP 4
#define DIAG308_SET 5
#define DIAG308_STORE 6
+#define DIAG308_PV_SET 8
+#define DIAG308_PV_STORE 9
+#define DIAG308_PV_START 10
static int diag308_parm_check(CPUS390XState *env, uint64_t r1, uint64_t addr,
uintptr_t ra, bool write)
@@ -105,6 +110,7 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1,
uint64_t r3, uintptr_t ra)
s390_ipl_reset_request(cs, S390_RESET_REIPL);
break;
case DIAG308_SET:
+ case DIAG308_PV_SET:
if (diag308_parm_check(env, r1, addr, ra, false)) {
return;
}
@@ -117,7 +123,8 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1,
uint64_t r3, uintptr_t ra)
cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
- if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb)) {
+ if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb) &&
+ !(iplb_valid_pv(iplb) && !s390_ipl_pv_check_components(iplb))) {
env->regs[r1 + 1] = DIAG_308_RC_INVALID;
goto out;
}
@@ -128,17 +135,31 @@ out:
g_free(iplb);
return;
case DIAG308_STORE:
+ case DIAG308_PV_STORE:
if (diag308_parm_check(env, r1, addr, ra, true)) {
return;
}
- iplb = s390_ipl_get_iplb();
+ if (subcode == DIAG308_PV_STORE) {
+ iplb = s390_ipl_get_iplb_secure();
+ } else {
+ iplb = s390_ipl_get_iplb();
+ }
if (iplb) {
cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
env->regs[r1 + 1] = DIAG_308_RC_OK;
} else {
env->regs[r1 + 1] = DIAG_308_RC_NO_CONF;
}
- return;
+ break;
+ case DIAG308_PV_START:
+ iplb = s390_ipl_get_iplb_secure();
+ if (!iplb || !iplb_valid_pv(iplb)) {
+ env->regs[r1 + 1] = DIAG_308_RC_NO_PV_CONF;
+ return;
+ }
+
+ s390_ipl_reset_request(cs, S390_RESET_PV);
+ break;
default:
s390_program_interrupt(env, PGM_SPECIFICATION, ra);
break;
--
2.20.1
- [PATCH v5 13/18] s390x: protvirt: Move diag 308 data over SIDAD, (continued)
- [PATCH v5 13/18] s390x: protvirt: Move diag 308 data over SIDAD, Janosch Frank, 2020/02/26
- [PATCH v5 12/18] s390x: protvirt: Set guest IPL PSW, Janosch Frank, 2020/02/26
- [PATCH v5 11/18] s390x: protvirt: SCLP interpretation, Janosch Frank, 2020/02/26
- [PATCH v5 08/18] s390x: protvirt: KVM intercept changes, Janosch Frank, 2020/02/26
- [PATCH v5 10/18] s390x: protvirt: Move STSI data over SIDAD, Janosch Frank, 2020/02/26
- [PATCH v5 15/18] s390x: protvirt: Move IO control structures over SIDA, Janosch Frank, 2020/02/26
- [PATCH v5 16/18] s390x: protvirt: Handle SIGP store status correctly, Janosch Frank, 2020/02/26
- [PATCH v5 18/18] docs: Add protvirt docs, Janosch Frank, 2020/02/26
- [PATCH v5 17/18] s390x: Add unpack facility feature to GA1, Janosch Frank, 2020/02/26
- [PATCH v5 14/18] s390x: protvirt: Disable address checks for PV guest IO emulation, Janosch Frank, 2020/02/26
- [PATCH v5 03/18] s390x: protvirt: Add diag308 subcodes 8 - 10,
Janosch Frank <=
- Re: [PATCH v5 00/18] s390x: Protected Virtualization support, Cornelia Huck, 2020/02/26