[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 11/13] s390x: protvirt: Move diag 308 data over SIDAD
From: |
David Hildenbrand |
Subject: |
Re: [PATCH v2 11/13] s390x: protvirt: Move diag 308 data over SIDAD |
Date: |
Fri, 29 Nov 2019 12:34:08 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.1.1 |
On 29.11.19 10:48, Janosch Frank wrote:
> For protected guests the IPIB is written/read to/from the satellite
> block, so we need to make those accesses virtual to make them go
> through KVM mem ops.
same comment regarding virt mem access. IMHO, the KVM mem ops should
return a hard error in case we're in pv mode.
>
> Signed-off-by: Janosch Frank <address@hidden>
> ---
> target/s390x/diag.c | 26 +++++++++++++++++++++++---
> 1 file changed, 23 insertions(+), 3 deletions(-)
>
> diff --git a/target/s390x/diag.c b/target/s390x/diag.c
> index 5489fc721a..6d78759151 100644
> --- a/target/s390x/diag.c
> +++ b/target/s390x/diag.c
> @@ -88,6 +88,7 @@ static int diag308_parm_check(CPUS390XState *env, uint64_t
> r1, uint64_t addr,
> void handle_diag_308(CPUS390XState *env, uint64_t r1, uint64_t r3, uintptr_t
> ra)
> {
> CPUState *cs = env_cpu(env);
> + S390CPU *cpu = S390_CPU(cs);
> uint64_t addr = env->regs[r1];
> uint64_t subcode = env->regs[r3];
> IplParameterBlock *iplb;
> @@ -118,14 +119,27 @@ void handle_diag_308(CPUS390XState *env, uint64_t r1,
> uint64_t r3, uintptr_t ra)
> if (diag308_parm_check(env, r1, addr, ra, false)) {
> return;
> }
> +
> iplb = g_new0(IplParameterBlock, 1);
> - cpu_physical_memory_read(addr, iplb, sizeof(iplb->len));
> + if (!env->pv) {
> + cpu_physical_memory_read(addr, iplb, sizeof(iplb->len));
> + } else {
> + s390_cpu_virt_mem_read(cpu, 0, 0, iplb, sizeof(iplb->len));
> + s390_cpu_virt_mem_handle_exc(cpu, ra);
> + }
> +
> if (!iplb_valid_len(iplb)) {
> env->regs[r1 + 1] = DIAG_308_RC_INVALID;
> goto out;
> }
>
> - cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
> + if (!env->pv) {
> + cpu_physical_memory_read(addr, iplb, be32_to_cpu(iplb->len));
> + } else {
> + s390_cpu_virt_mem_read(cpu, 0, 0, iplb, be32_to_cpu(iplb->len));
> + s390_cpu_virt_mem_handle_exc(cpu, ra);
> + }
> +
>
> if (!iplb_valid_ccw(iplb) && !iplb_valid_fcp(iplb) &&
> !(iplb_valid_se(iplb) && s390_ipl_pv_check_comp(iplb) >= 0)) {
> @@ -149,7 +163,13 @@ out:
> iplb = s390_ipl_get_iplb();
> }
> if (iplb) {
> - cpu_physical_memory_write(addr, iplb, be32_to_cpu(iplb->len));
> + if (!env->pv) {
> + cpu_physical_memory_write(addr, iplb,
> be32_to_cpu(iplb->len));
> + } else {
> + s390_cpu_virt_mem_write(cpu, 0, 0, iplb,
> + be32_to_cpu(iplb->len));
> + s390_cpu_virt_mem_handle_exc(cpu, ra);
... exactly due to this handling where we actually can't have
exceptions, I don't like reusing this infrastructure/interface.
--
Thanks,
David / dhildenb
- Re: [PATCH v2 05/13] s390x: protvirt: Add pv state to cpu env, (continued)
- [PATCH v2 12/13] s390x: protvirt: Disable address checks for PV guest IO emulation, Janosch Frank, 2019/11/29
- [PATCH v2 09/13] s390x: Exit on vcpu reset error, Janosch Frank, 2019/11/29
- [PATCH v2 11/13] s390x: protvirt: Move diag 308 data over SIDAD, Janosch Frank, 2019/11/29
- Re: [PATCH v2 11/13] s390x: protvirt: Move diag 308 data over SIDAD,
David Hildenbrand <=
- [PATCH v2 10/13] s390x: protvirt: Set guest IPL PSW, Janosch Frank, 2019/11/29
- [PATCH v2 03/13] s390x: protvirt: Support unpack facility, Janosch Frank, 2019/11/29
- [PATCH v2 13/13] s390x: protvirt: Handle SIGP store status correctly, Janosch Frank, 2019/11/29