[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[qemu-s390x] [PATCH for 2.13 15/19] linux-user: move s390x cpu loop to s
From: |
Laurent Vivier |
Subject: |
[qemu-s390x] [PATCH for 2.13 15/19] linux-user: move s390x cpu loop to s390x directory |
Date: |
Mon, 26 Mar 2018 21:15:59 +0200 |
No code change, only move code from main.c to
s390x/cpu_loop.c.
Signed-off-by: Laurent Vivier <address@hidden>
---
linux-user/main.c | 146 --------------------------------------------
linux-user/s390x/cpu_loop.c | 139 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 139 insertions(+), 146 deletions(-)
diff --git a/linux-user/main.c b/linux-user/main.c
index a3c68dad36..9693383009 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -149,143 +149,6 @@ void fork_end(int child)
}
}
-#ifdef TARGET_S390X
-
-/* s390x masks the fault address it reports in si_addr for SIGSEGV and SIGBUS
*/
-#define S390X_FAIL_ADDR_MASK -4096LL
-
-void cpu_loop(CPUS390XState *env)
-{
- CPUState *cs = CPU(s390_env_get_cpu(env));
- int trapnr, n, sig;
- target_siginfo_t info;
- target_ulong addr;
- abi_long ret;
-
- while (1) {
- cpu_exec_start(cs);
- trapnr = cpu_exec(cs);
- cpu_exec_end(cs);
- process_queued_cpu_work(cs);
-
- switch (trapnr) {
- case EXCP_INTERRUPT:
- /* Just indicate that signals should be handled asap. */
- break;
-
- case EXCP_SVC:
- n = env->int_svc_code;
- if (!n) {
- /* syscalls > 255 */
- n = env->regs[1];
- }
- env->psw.addr += env->int_svc_ilen;
- ret = do_syscall(env, n, env->regs[2], env->regs[3],
- env->regs[4], env->regs[5],
- env->regs[6], env->regs[7], 0, 0);
- if (ret == -TARGET_ERESTARTSYS) {
- env->psw.addr -= env->int_svc_ilen;
- } else if (ret != -TARGET_QEMU_ESIGRETURN) {
- env->regs[2] = ret;
- }
- break;
-
- case EXCP_DEBUG:
- sig = gdb_handlesig(cs, TARGET_SIGTRAP);
- if (sig) {
- n = TARGET_TRAP_BRKPT;
- goto do_signal_pc;
- }
- break;
- case EXCP_PGM:
- n = env->int_pgm_code;
- switch (n) {
- case PGM_OPERATION:
- case PGM_PRIVILEGED:
- sig = TARGET_SIGILL;
- n = TARGET_ILL_ILLOPC;
- goto do_signal_pc;
- case PGM_PROTECTION:
- case PGM_ADDRESSING:
- sig = TARGET_SIGSEGV;
- /* XXX: check env->error_code */
- n = TARGET_SEGV_MAPERR;
- addr = env->__excp_addr & S390X_FAIL_ADDR_MASK;
- goto do_signal;
- case PGM_EXECUTE:
- case PGM_SPECIFICATION:
- case PGM_SPECIAL_OP:
- case PGM_OPERAND:
- do_sigill_opn:
- sig = TARGET_SIGILL;
- n = TARGET_ILL_ILLOPN;
- goto do_signal_pc;
-
- case PGM_FIXPT_OVERFLOW:
- sig = TARGET_SIGFPE;
- n = TARGET_FPE_INTOVF;
- goto do_signal_pc;
- case PGM_FIXPT_DIVIDE:
- sig = TARGET_SIGFPE;
- n = TARGET_FPE_INTDIV;
- goto do_signal_pc;
-
- case PGM_DATA:
- n = (env->fpc >> 8) & 0xff;
- if (n == 0xff) {
- /* compare-and-trap */
- goto do_sigill_opn;
- } else {
- /* An IEEE exception, simulated or otherwise. */
- if (n & 0x80) {
- n = TARGET_FPE_FLTINV;
- } else if (n & 0x40) {
- n = TARGET_FPE_FLTDIV;
- } else if (n & 0x20) {
- n = TARGET_FPE_FLTOVF;
- } else if (n & 0x10) {
- n = TARGET_FPE_FLTUND;
- } else if (n & 0x08) {
- n = TARGET_FPE_FLTRES;
- } else {
- /* ??? Quantum exception; BFP, DFP error. */
- goto do_sigill_opn;
- }
- sig = TARGET_SIGFPE;
- goto do_signal_pc;
- }
-
- default:
- fprintf(stderr, "Unhandled program exception: %#x\n", n);
- cpu_dump_state(cs, stderr, fprintf, 0);
- exit(EXIT_FAILURE);
- }
- break;
-
- do_signal_pc:
- addr = env->psw.addr;
- do_signal:
- info.si_signo = sig;
- info.si_errno = 0;
- info.si_code = n;
- info._sifields._sigfault._addr = addr;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
-
- case EXCP_ATOMIC:
- cpu_exec_step_atomic(cs);
- break;
- default:
- fprintf(stderr, "Unhandled trap: 0x%x\n", trapnr);
- cpu_dump_state(cs, stderr, fprintf, 0);
- exit(EXIT_FAILURE);
- }
- process_pending_signals (env);
- }
-}
-
-#endif /* TARGET_S390X */
-
#ifdef TARGET_TILEGX
static void gen_sigill_reg(CPUTLGState *env)
@@ -1717,15 +1580,6 @@ int main(int argc, char **argv, char **envp)
env->pc = regs->sepc;
env->gpr[xSP] = regs->sp;
}
-#elif defined(TARGET_S390X)
- {
- int i;
- for (i = 0; i < 16; i++) {
- env->regs[i] = regs->gprs[i];
- }
- env->psw.mask = regs->psw.mask;
- env->psw.addr = regs->psw.addr;
- }
#elif defined(TARGET_TILEGX)
{
int i;
diff --git a/linux-user/s390x/cpu_loop.c b/linux-user/s390x/cpu_loop.c
index b7700a5561..99f5f1594f 100644
--- a/linux-user/s390x/cpu_loop.c
+++ b/linux-user/s390x/cpu_loop.c
@@ -21,6 +21,145 @@
#include "qemu.h"
#include "cpu_loop-common.h"
+/* s390x masks the fault address it reports in si_addr for SIGSEGV and SIGBUS
*/
+#define S390X_FAIL_ADDR_MASK -4096LL
+
+void cpu_loop(CPUS390XState *env)
+{
+ CPUState *cs = CPU(s390_env_get_cpu(env));
+ int trapnr, n, sig;
+ target_siginfo_t info;
+ target_ulong addr;
+ abi_long ret;
+
+ while (1) {
+ cpu_exec_start(cs);
+ trapnr = cpu_exec(cs);
+ cpu_exec_end(cs);
+ process_queued_cpu_work(cs);
+
+ switch (trapnr) {
+ case EXCP_INTERRUPT:
+ /* Just indicate that signals should be handled asap. */
+ break;
+
+ case EXCP_SVC:
+ n = env->int_svc_code;
+ if (!n) {
+ /* syscalls > 255 */
+ n = env->regs[1];
+ }
+ env->psw.addr += env->int_svc_ilen;
+ ret = do_syscall(env, n, env->regs[2], env->regs[3],
+ env->regs[4], env->regs[5],
+ env->regs[6], env->regs[7], 0, 0);
+ if (ret == -TARGET_ERESTARTSYS) {
+ env->psw.addr -= env->int_svc_ilen;
+ } else if (ret != -TARGET_QEMU_ESIGRETURN) {
+ env->regs[2] = ret;
+ }
+ break;
+
+ case EXCP_DEBUG:
+ sig = gdb_handlesig(cs, TARGET_SIGTRAP);
+ if (sig) {
+ n = TARGET_TRAP_BRKPT;
+ goto do_signal_pc;
+ }
+ break;
+ case EXCP_PGM:
+ n = env->int_pgm_code;
+ switch (n) {
+ case PGM_OPERATION:
+ case PGM_PRIVILEGED:
+ sig = TARGET_SIGILL;
+ n = TARGET_ILL_ILLOPC;
+ goto do_signal_pc;
+ case PGM_PROTECTION:
+ case PGM_ADDRESSING:
+ sig = TARGET_SIGSEGV;
+ /* XXX: check env->error_code */
+ n = TARGET_SEGV_MAPERR;
+ addr = env->__excp_addr & S390X_FAIL_ADDR_MASK;
+ goto do_signal;
+ case PGM_EXECUTE:
+ case PGM_SPECIFICATION:
+ case PGM_SPECIAL_OP:
+ case PGM_OPERAND:
+ do_sigill_opn:
+ sig = TARGET_SIGILL;
+ n = TARGET_ILL_ILLOPN;
+ goto do_signal_pc;
+
+ case PGM_FIXPT_OVERFLOW:
+ sig = TARGET_SIGFPE;
+ n = TARGET_FPE_INTOVF;
+ goto do_signal_pc;
+ case PGM_FIXPT_DIVIDE:
+ sig = TARGET_SIGFPE;
+ n = TARGET_FPE_INTDIV;
+ goto do_signal_pc;
+
+ case PGM_DATA:
+ n = (env->fpc >> 8) & 0xff;
+ if (n == 0xff) {
+ /* compare-and-trap */
+ goto do_sigill_opn;
+ } else {
+ /* An IEEE exception, simulated or otherwise. */
+ if (n & 0x80) {
+ n = TARGET_FPE_FLTINV;
+ } else if (n & 0x40) {
+ n = TARGET_FPE_FLTDIV;
+ } else if (n & 0x20) {
+ n = TARGET_FPE_FLTOVF;
+ } else if (n & 0x10) {
+ n = TARGET_FPE_FLTUND;
+ } else if (n & 0x08) {
+ n = TARGET_FPE_FLTRES;
+ } else {
+ /* ??? Quantum exception; BFP, DFP error. */
+ goto do_sigill_opn;
+ }
+ sig = TARGET_SIGFPE;
+ goto do_signal_pc;
+ }
+
+ default:
+ fprintf(stderr, "Unhandled program exception: %#x\n", n);
+ cpu_dump_state(cs, stderr, fprintf, 0);
+ exit(EXIT_FAILURE);
+ }
+ break;
+
+ do_signal_pc:
+ addr = env->psw.addr;
+ do_signal:
+ info.si_signo = sig;
+ info.si_errno = 0;
+ info.si_code = n;
+ info._sifields._sigfault._addr = addr;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
+
+ case EXCP_ATOMIC:
+ cpu_exec_step_atomic(cs);
+ break;
+ default:
+ fprintf(stderr, "Unhandled trap: 0x%x\n", trapnr);
+ cpu_dump_state(cs, stderr, fprintf, 0);
+ exit(EXIT_FAILURE);
+ }
+ process_pending_signals (env);
+ }
+}
+
void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs)
{
+ int i;
+ for (i = 0; i < 16; i++) {
+ env->regs[i] = regs->gprs[i];
+ }
+ env->psw.mask = regs->psw.mask;
+ env->psw.addr = regs->psw.addr;
}
--
2.14.3
- [qemu-s390x] [PATCH for 2.13 06/19] linux-user: move ppc/ppc64 cpu loop to ppc directory, (continued)
- [qemu-s390x] [PATCH for 2.13 06/19] linux-user: move ppc/ppc64 cpu loop to ppc directory, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 19/19] linux-user: move xtensa cpu loop to xtensa directory, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 01/19] linux-user: create a dummy per arch cpu_loop.c, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 14/19] linux-user: move alpha cpu loop to alpha directory, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 17/19] linux-user: move riscv cpu loop to riscv directory, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 11/19] linux-user: move cris cpu loop to cris directory, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 10/19] linux-user: move sh4 cpu loop to sh4 directory, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 16/19] linux-user: move tilegx cpu loop to tilegx directory, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 15/19] linux-user: move s390x cpu loop to s390x directory,
Laurent Vivier <=
- [qemu-s390x] [PATCH for 2.13 07/19] linux-user: move mips/mips64 cpu loop to mips directory, Laurent Vivier, 2018/03/26
- [qemu-s390x] [PATCH for 2.13 18/19] linux-user: move hppa cpu loop to hppa directory, Laurent Vivier, 2018/03/26
- Re: [qemu-s390x] [Qemu-devel] [PATCH for 2.13 00/19] linux-user: move arch specific parts from main.c to arch directories, Richard Henderson, 2018/03/28
- Re: [qemu-s390x] [Qemu-devel] [PATCH for 2.13 00/19] linux-user: move arch specific parts from main.c to arch directories, no-reply, 2018/03/29
- Re: [qemu-s390x] [Qemu-devel] [PATCH for 2.13 00/19] linux-user: move arch specific parts from main.c to arch directories, no-reply, 2018/03/31