[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[qemu-s390x] [PULL-for-s390x 13/14] s390-ccw: interactive boot menu for
From: |
Thomas Huth |
Subject: |
[qemu-s390x] [PULL-for-s390x 13/14] s390-ccw: interactive boot menu for scsi |
Date: |
Mon, 26 Feb 2018 11:42:36 +0100 |
From: "Collin L. Walling" <address@hidden>
Interactive boot menu for scsi. This follows a similar procedure
as the interactive menu for eckd dasd. An example follows:
s390x Enumerated Boot Menu.
3 entries detected. Select from index 0 to 2.
Signed-off-by: Collin L. Walling <address@hidden>
Reviewed-by: Thomas Huth <address@hidden>
[thuth: Added additional "break;" statement to avoid analyzer warnings]
Signed-off-by: Thomas Huth <address@hidden>
---
hw/s390x/ipl.c | 2 ++
pc-bios/s390-ccw/bootmap.c | 4 ++++
pc-bios/s390-ccw/main.c | 1 +
pc-bios/s390-ccw/menu.c | 20 ++++++++++++++++++++
pc-bios/s390-ccw/s390-ccw.h | 2 ++
5 files changed, 29 insertions(+)
diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
index c12e460..798e99a 100644
--- a/hw/s390x/ipl.c
+++ b/hw/s390x/ipl.c
@@ -247,6 +247,8 @@ static void s390_ipl_set_boot_menu(S390IPLState *ipl)
return;
}
break;
+ case S390_IPL_TYPE_QEMU_SCSI:
+ break;
default:
error_report("boot menu is not supported for this device type.");
return;
diff --git a/pc-bios/s390-ccw/bootmap.c b/pc-bios/s390-ccw/bootmap.c
index ae93b55..29bfd8c 100644
--- a/pc-bios/s390-ccw/bootmap.c
+++ b/pc-bios/s390-ccw/bootmap.c
@@ -568,6 +568,10 @@ static void ipl_scsi(void)
debug_print_int("program table entries", program_table_entries);
IPL_assert(program_table_entries != 0, "Empty Program Table");
+ if (menu_is_enabled_enum()) {
+ loadparm = menu_get_enum_boot_index(program_table_entries);
+ }
+
debug_print_int("loadparm", loadparm);
IPL_assert(loadparm <= MAX_TABLE_ENTRIES, "loadparm value greater than"
" maximum number of boot entries allowed");
diff --git a/pc-bios/s390-ccw/main.c b/pc-bios/s390-ccw/main.c
index a7473b0..9d9f8cf 100644
--- a/pc-bios/s390-ccw/main.c
+++ b/pc-bios/s390-ccw/main.c
@@ -92,6 +92,7 @@ static void menu_setup(void)
switch (iplb.pbt) {
case S390_IPL_TYPE_CCW:
+ case S390_IPL_TYPE_QEMU_SCSI:
menu_set_parms(qipl.qipl_flags & BOOT_MENU_FLAG_MASK,
qipl.boot_menu_timeout);
return;
diff --git a/pc-bios/s390-ccw/menu.c b/pc-bios/s390-ccw/menu.c
index ee56939..96eec81 100644
--- a/pc-bios/s390-ccw/menu.c
+++ b/pc-bios/s390-ccw/menu.c
@@ -217,6 +217,21 @@ int menu_get_zipl_boot_index(const char *menu_data)
return get_boot_index(entries - 1); /* subtract 1 to exclude banner */
}
+
+int menu_get_enum_boot_index(int entries)
+{
+ char tmp[4];
+
+ sclp_print("s390x Enumerated Boot Menu.\n\n");
+
+ sclp_print(uitoa(entries, tmp, sizeof(tmp)));
+ sclp_print(" entries detected. Select from boot index 0 to ");
+ sclp_print(uitoa(entries - 1, tmp, sizeof(tmp)));
+ sclp_print(".\n\n");
+
+ return get_boot_index(entries);
+}
+
void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout)
{
flag = boot_menu_flag;
@@ -227,3 +242,8 @@ bool menu_is_enabled_zipl(void)
{
return flag & (QIPL_FLAG_BM_OPTS_CMD | QIPL_FLAG_BM_OPTS_ZIPL);
}
+
+bool menu_is_enabled_enum(void)
+{
+ return flag & QIPL_FLAG_BM_OPTS_CMD;
+}
diff --git a/pc-bios/s390-ccw/s390-ccw.h b/pc-bios/s390-ccw/s390-ccw.h
index c4ddf9f..fd18da2 100644
--- a/pc-bios/s390-ccw/s390-ccw.h
+++ b/pc-bios/s390-ccw/s390-ccw.h
@@ -91,6 +91,8 @@ void zipl_load(void);
void menu_set_parms(uint8_t boot_menu_flag, uint32_t boot_menu_timeout);
int menu_get_zipl_boot_index(const char *menu_data);
bool menu_is_enabled_zipl(void);
+int menu_get_enum_boot_index(int entries);
+bool menu_is_enabled_enum(void);
static inline void fill_hex(char *out, unsigned char val)
{
--
1.8.3.1
- Re: [qemu-s390x] [Qemu-devel] [PULL-for-s390x 06/14] s390-ccw: parse and set boot menu options, (continued)
[qemu-s390x] [PULL-for-s390x 04/14] s390-ccw: update libc, Thomas Huth, 2018/02/26
[qemu-s390x] [PULL-for-s390x 05/14] s390-ccw: move auxiliary IPL data to separate location, Thomas Huth, 2018/02/26
[qemu-s390x] [PULL-for-s390x 07/14] s390-ccw: set up interactive boot menu parameters, Thomas Huth, 2018/02/26
[qemu-s390x] [PULL-for-s390x 09/14] s390-ccw: print zipl boot menu, Thomas Huth, 2018/02/26
[qemu-s390x] [PULL-for-s390x 08/14] s390-ccw: read stage2 boot loader data to find menu, Thomas Huth, 2018/02/26
[qemu-s390x] [PULL-for-s390x 10/14] s390-ccw: read user input for boot index via the SCLP console, Thomas Huth, 2018/02/26
[qemu-s390x] [PULL-for-s390x 11/14] s390-ccw: set cp_receive mask only when needed and consume pending service irqs, Thomas Huth, 2018/02/26
[qemu-s390x] [PULL-for-s390x 12/14] s390-ccw: use zipl values when no boot menu options are present, Thomas Huth, 2018/02/26
[qemu-s390x] [PULL-for-s390x 13/14] s390-ccw: interactive boot menu for scsi,
Thomas Huth <=
[qemu-s390x] [PULL-for-s390x 14/14] pc-bios/s390: Rebuild the s390x firmware images with the boot menu changes, Thomas Huth, 2018/02/26
Re: [qemu-s390x] [PULL-for-s390x 00/14] s390-ccw firmware update, Cornelia Huck, 2018/02/27
Re: [qemu-s390x] [Qemu-devel] [PULL-for-s390x 00/14] s390-ccw firmware update, Peter Maydell, 2018/02/27