[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [qemu-s390x] [PATCH v8 05/13] s390-ccw: move auxiliary IPL data to s
From: |
Viktor Mihajlovski |
Subject: |
Re: [qemu-s390x] [PATCH v8 05/13] s390-ccw: move auxiliary IPL data to separate location |
Date: |
Thu, 22 Feb 2018 09:38:42 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.6.0 |
On 22.02.2018 05:40, Thomas Huth wrote:
> On 21.02.2018 20:35, Collin L. Walling wrote:
>> The s390-ccw firmware needs some information in support of the
>> boot process which is not available on the native machine.
>> Examples are the netboot firmware load address and now the
>> boot menu parameters.
>>
>> While storing that data in unused fields of the IPL parameter block
>> works, that approach could create problems if the parameter block
>> definition should change in the future. Because then a guest could
>> overwrite these fields using the set IPLB diagnose.
>>
>> In fact the data in question is of more global nature and not really
>> tied to an IPL device, so separating it is rather logical.
>>
>> This commit introduces a new structure to hold firmware relevant
>> IPL parameters set by QEMU. The data is stored at location 204 (dec)
>> and can contain up to 7 32-bit words. This area is available to
>> programming in the z/Architecture Principles of Operation and
>> can thus safely be used by the firmware until the IPL has completed.
>>
>> Signed-off-by: Viktor Mihajlovski <address@hidden>
>> Signed-off-by: Collin L. Walling <address@hidden>
>> ---
>> hw/s390x/ipl.c | 18 +++++++++++++++++-
>> hw/s390x/ipl.h | 25 +++++++++++++++++++++++--
>> pc-bios/s390-ccw/iplb.h | 18 ++++++++++++++++--
>> pc-bios/s390-ccw/main.c | 6 +++++-
>> 4 files changed, 61 insertions(+), 6 deletions(-)
>>
>> diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
>> index 0d06fc1..79f5a58 100644
>> --- a/hw/s390x/ipl.c
>> +++ b/hw/s390x/ipl.c
>> @@ -399,6 +399,21 @@ void s390_reipl_request(void)
>> qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
>> }
>>
>> +static void s390_ipl_prepare_qipl(S390CPU *cpu)
>> +{
>> + S390IPLState *ipl = get_ipl_device();
>> + uint8_t *addr;
>> + uint64_t len = 4096;
>> +
>> + addr = cpu_physical_memory_map(cpu->env.psa, &len, 1);
>> + if (!addr || len < QIPL_ADDRESS + sizeof(QemuIplParameters)) {
>> + error_report("Cannot set QEMU IPL parameters");
>> + return;
>> + }
>> + memcpy(addr + QIPL_ADDRESS, &ipl->qipl, sizeof(QemuIplParameters));
>> + cpu_physical_memory_unmap(addr, len, 1, len);
>> +}
>> +
>> void s390_ipl_prepare_cpu(S390CPU *cpu)
>> {
>> S390IPLState *ipl = get_ipl_device();
>> @@ -418,8 +433,9 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
>> error_report_err(err);
>> vm_stop(RUN_STATE_INTERNAL_ERROR);
>> }
>> - ipl->iplb.ccw.netboot_start_addr = cpu_to_be64(ipl->start_addr);
>> + ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
>> }
>> + s390_ipl_prepare_qipl(cpu);
>> }
>>
>> static void s390_ipl_reset(DeviceState *dev)
>> diff --git a/hw/s390x/ipl.h b/hw/s390x/ipl.h
>> index 8a705e0..08926a3 100644
>> --- a/hw/s390x/ipl.h
>> +++ b/hw/s390x/ipl.h
>> @@ -16,8 +16,7 @@
>> #include "cpu.h"
>>
>> struct IplBlockCcw {
>> - uint64_t netboot_start_addr;
>> - uint8_t reserved0[77];
>> + uint8_t reserved0[85];
>> uint8_t ssid;
>> uint16_t devno;
>> uint8_t vm_flags;
>> @@ -90,6 +89,27 @@ void s390_ipl_prepare_cpu(S390CPU *cpu);
>> IplParameterBlock *s390_ipl_get_iplb(void);
>> void s390_reipl_request(void);
>>
>> +#define QIPL_ADDRESS 0xcc
>> +
>> +/*
>> + * The QEMU IPL Parameters will be stored at absolute address
>> + * 204 (0xcc) which means it is 32-bit word aligned but not
>> + * double-word aligned.
>> + * Placement of data fields in this area must account for
>> + * their alignment needs. E.g., netboot_start_address must
>> + * have an offset of n * 8 bytes within the struct in order
>> + * to keep it double-word aligned.
>
> Should that rather be "4 + n * 8" instead of "n * 8" ?
I wonder if I ever get that comment right. You're correct of course.
>
> Apart from that, patch looks good to me now, so once you've fixed the
> comment (if necessary):
>
> Reviewed-by: Thomas Huth <address@hidden>
>
--
Regards,
Viktor Mihajlovski
- Re: [qemu-s390x] [PATCH v8 11/13] s390-ccw: set cp_receive mask only when needed and consume pending service irqs, (continued)
- [qemu-s390x] [PATCH v8 06/13] s390-ccw: parse and set boot menu options, Collin L. Walling, 2018/02/21
- [qemu-s390x] [PATCH v8 07/13] s390-ccw: set up interactive boot menu parameters, Collin L. Walling, 2018/02/21
- [qemu-s390x] [PATCH v8 03/13] s390-ccw: refactor IPL structs, Collin L. Walling, 2018/02/21
- [qemu-s390x] [PATCH v8 09/13] s390-ccw: print zipl boot menu, Collin L. Walling, 2018/02/21
- [qemu-s390x] [PATCH v8 13/13] s390-ccw: interactive boot menu for scsi, Collin L. Walling, 2018/02/21
- [qemu-s390x] [PATCH v8 05/13] s390-ccw: move auxiliary IPL data to separate location, Collin L. Walling, 2018/02/21
- Re: [qemu-s390x] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Christian Borntraeger, 2018/02/22
- Re: [qemu-s390x] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Viktor Mihajlovski, 2018/02/22
- Re: [qemu-s390x] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Collin L. Walling, 2018/02/22
- Re: [qemu-s390x] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Christian Borntraeger, 2018/02/22
- Re: [qemu-s390x] [Qemu-devel] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Collin L. Walling, 2018/02/22
- Re: [qemu-s390x] [Qemu-devel] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Collin L. Walling, 2018/02/22
- Re: [qemu-s390x] [Qemu-devel] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Thomas Huth, 2018/02/23
- Re: [qemu-s390x] [Qemu-devel] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Christian Borntraeger, 2018/02/23
- Re: [qemu-s390x] [Qemu-devel] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Collin L. Walling, 2018/02/23
- Re: [qemu-s390x] [Qemu-devel] [PATCH v8 00/13] Interactive Boot Menu for DASD and SCSI Guests on s390x, Collin L. Walling, 2018/02/23