[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [qemu-s390x] [PATCHv2 1/3] qmp: expose s390-specific CPU info
|
From: |
David Hildenbrand |
|
Subject: |
Re: [qemu-s390x] [PATCHv2 1/3] qmp: expose s390-specific CPU info |
|
Date: |
Wed, 14 Feb 2018 10:46:16 +0100 |
|
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.5.2 |
On 13.02.2018 18:18, Viktor Mihajlovski wrote:
> Presently s390x is the only architecture not exposing specific
> CPU information via QMP query-cpus. Upstream discussion has shown
> that it could make sense to report the architecture specific CPU
> state, e.g. to detect that a CPU has been stopped.
>
> With this change the output of query-cpus will look like this on
> s390:
>
> [
> {"arch": "s390", "current": true,
> "props": {"core-id": 0}, "cpu-state": "operating", "CPU": 0,
> "qom_path": "/machine/unattached/device[0]",
> "halted": false, "thread_id": 63115},
> {"arch": "s390", "current": false,
> "props": {"core-id": 1}, "cpu-state": "stopped", "CPU": 1,
> "qom_path": "/machine/unattached/device[1]",
> "halted": true, "thread_id": 63116}
> ]
>
> Signed-off-by: Viktor Mihajlovski <address@hidden>
> Acked-by: Eric Blake <address@hidden>
> ---
> cpus.c | 6 ++++++
> hmp.c | 4 ++++
> hw/intc/s390_flic.c | 4 ++--
> hw/s390x/s390-virtio-ccw.c | 2 +-
> qapi-schema.json | 28 +++++++++++++++++++++++++++-
> target/s390x/cpu.c | 24 ++++++++++++------------
> target/s390x/cpu.h | 7 ++-----
> target/s390x/kvm.c | 8 ++++----
> target/s390x/sigp.c | 38 +++++++++++++++++++-------------------
> 9 files changed, 77 insertions(+), 44 deletions(-)
>
> diff --git a/cpus.c b/cpus.c
> index f298b65..6006931 100644
> --- a/cpus.c
> +++ b/cpus.c
> @@ -2100,6 +2100,9 @@ CpuInfoList *qmp_query_cpus(Error **errp)
> #elif defined(TARGET_TRICORE)
> TriCoreCPU *tricore_cpu = TRICORE_CPU(cpu);
> CPUTriCoreState *env = &tricore_cpu->env;
> +#elif defined(TARGET_S390X)
> + S390CPU *s390_cpu = S390_CPU(cpu);
> + CPUS390XState *env = &s390_cpu->env;
> #endif
>
> cpu_synchronize_state(cpu);
> @@ -2127,6 +2130,9 @@ CpuInfoList *qmp_query_cpus(Error **errp)
> #elif defined(TARGET_TRICORE)
> info->value->arch = CPU_INFO_ARCH_TRICORE;
> info->value->u.tricore.PC = env->PC;
> +#elif defined(TARGET_S390X)
> + info->value->arch = CPU_INFO_ARCH_S390;
> + info->value->u.s390.cpu_state = env->cpu_state;
> #else
> info->value->arch = CPU_INFO_ARCH_OTHER;
> #endif
> diff --git a/hmp.c b/hmp.c
> index 7870d6a..a6b94b7 100644
> --- a/hmp.c
> +++ b/hmp.c
> @@ -392,6 +392,10 @@ void hmp_info_cpus(Monitor *mon, const QDict *qdict)
> case CPU_INFO_ARCH_TRICORE:
> monitor_printf(mon, " PC=0x%016" PRIx64,
> cpu->value->u.tricore.PC);
> break;
> + case CPU_INFO_ARCH_S390:
> + monitor_printf(mon, " state=%s",
> + CpuS390State_str(cpu->value->u.s390.cpu_state));
> + break;
> default:
> break;
> }
> diff --git a/hw/intc/s390_flic.c b/hw/intc/s390_flic.c
> index a85a149..5f8168f 100644
> --- a/hw/intc/s390_flic.c
> +++ b/hw/intc/s390_flic.c
> @@ -192,8 +192,8 @@ static void qemu_s390_flic_notify(uint32_t type)
> cs->interrupt_request |= CPU_INTERRUPT_HARD;
>
> /* ignore CPUs that are not sleeping */
> - if (s390_cpu_get_state(cpu) != CPU_STATE_OPERATING &&
> - s390_cpu_get_state(cpu) != CPU_STATE_LOAD) {
> + if (s390_cpu_get_state(cpu) != S390_CPU_STATE_OPERATING &&
> + s390_cpu_get_state(cpu) != S390_CPU_STATE_LOAD) {
> continue;
> }
>
> diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c
> index 4abbe89..4d0c3de 100644
> --- a/hw/s390x/s390-virtio-ccw.c
> +++ b/hw/s390x/s390-virtio-ccw.c
> @@ -368,7 +368,7 @@ static void s390_machine_reset(void)
>
> /* all cpus are stopped - configure and start the ipl cpu only */
> s390_ipl_prepare_cpu(ipl_cpu);
> - s390_cpu_set_state(CPU_STATE_OPERATING, ipl_cpu);
> + s390_cpu_set_state(S390_CPU_STATE_OPERATING, ipl_cpu);
> }
>
> static void s390_machine_device_plug(HotplugHandler *hotplug_dev,
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 0262b9f..94d560e 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -410,10 +410,12 @@
> # An enumeration of cpu types that enable additional information during
> # @query-cpus.
> #
> +# @s390: since 2.12
> +#
> # Since: 2.6
> ##
> { 'enum': 'CpuInfoArch',
> - 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 'other' ] }
> + 'data': ['x86', 'sparc', 'ppc', 'mips', 'tricore', 's390', 'other' ] }
>
> ##
> # @CpuInfo:
> @@ -452,6 +454,7 @@
> 'ppc': 'CpuInfoPPC',
> 'mips': 'CpuInfoMIPS',
> 'tricore': 'CpuInfoTricore',
> + 's390': 'CpuInfoS390',
> 'other': 'CpuInfoOther' } }
>
> ##
> @@ -522,6 +525,29 @@
> { 'struct': 'CpuInfoOther', 'data': { } }
>
> ##
> +# @CpuS390State:
> +#
> +# An enumeration of cpu states that can be assumed by a virtual
> +# S390 CPU
> +#
> +# Since: 2.12
> +##
> +{ 'enum': 'CpuS390State',
> + 'prefix': 'S390_CPU_STATE',
> + 'data': [ 'uninitialized', 'stopped', 'check-stop', 'operating', 'load' ] }
> +
> +##
> +# @CpuInfoS390:
> +#
> +# Additional information about a virtual S390 CPU
> +#
> +# @cpu-state: the virtual CPU's state
> +#
> +# Since: 2.12
> +##
> +{ 'struct': 'CpuInfoS390', 'data': { 'cpu-state': 'CpuS390State' } }
> +
> +##
> # @query-cpus:
> #
> # Returns a list of information about each virtual CPU.
> diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c
> index da7cb9c..52b74ed 100644
> --- a/target/s390x/cpu.c
> +++ b/target/s390x/cpu.c
> @@ -58,8 +58,8 @@ static bool s390_cpu_has_work(CPUState *cs)
> S390CPU *cpu = S390_CPU(cs);
>
> /* STOPPED cpus can never wake up */
> - if (s390_cpu_get_state(cpu) != CPU_STATE_LOAD &&
> - s390_cpu_get_state(cpu) != CPU_STATE_OPERATING) {
> + if (s390_cpu_get_state(cpu) != S390_CPU_STATE_LOAD &&
> + s390_cpu_get_state(cpu) != S390_CPU_STATE_OPERATING) {
> return false;
> }
>
> @@ -77,7 +77,7 @@ static void s390_cpu_load_normal(CPUState *s)
> S390CPU *cpu = S390_CPU(s);
> cpu->env.psw.addr = ldl_phys(s->as, 4) & PSW_MASK_ESA_ADDR;
> cpu->env.psw.mask = PSW_MASK_32 | PSW_MASK_64;
> - s390_cpu_set_state(CPU_STATE_OPERATING, cpu);
> + s390_cpu_set_state(S390_CPU_STATE_OPERATING, cpu);
> }
> #endif
>
> @@ -92,7 +92,7 @@ static void s390_cpu_reset(CPUState *s)
> env->bpbc = false;
> scc->parent_reset(s);
> cpu->env.sigp_order = 0;
> - s390_cpu_set_state(CPU_STATE_STOPPED, cpu);
> + s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
> }
>
> /* S390CPUClass::initial_reset() */
> @@ -135,7 +135,7 @@ static void s390_cpu_full_reset(CPUState *s)
>
> scc->parent_reset(s);
> cpu->env.sigp_order = 0;
> - s390_cpu_set_state(CPU_STATE_STOPPED, cpu);
> + s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
>
> memset(env, 0, offsetof(CPUS390XState, end_reset_fields));
>
> @@ -247,7 +247,7 @@ static void s390_cpu_initfn(Object *obj)
> env->tod_basetime = 0;
> env->tod_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, s390x_tod_timer, cpu);
> env->cpu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, s390x_cpu_timer, cpu);
> - s390_cpu_set_state(CPU_STATE_STOPPED, cpu);
> + s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
> #endif
> }
>
> @@ -275,8 +275,8 @@ static unsigned s390_count_running_cpus(void)
>
> CPU_FOREACH(cpu) {
> uint8_t state = S390_CPU(cpu)->env.cpu_state;
> - if (state == CPU_STATE_OPERATING ||
> - state == CPU_STATE_LOAD) {
> + if (state == S390_CPU_STATE_OPERATING ||
> + state == S390_CPU_STATE_LOAD) {
> if (!disabled_wait(cpu)) {
> nr_running++;
> }
> @@ -315,13 +315,13 @@ unsigned int s390_cpu_set_state(uint8_t cpu_state,
> S390CPU *cpu)
> trace_cpu_set_state(CPU(cpu)->cpu_index, cpu_state);
>
> switch (cpu_state) {
> - case CPU_STATE_STOPPED:
> - case CPU_STATE_CHECK_STOP:
> + case S390_CPU_STATE_STOPPED:
> + case S390_CPU_STATE_CHECK_STOP:
> /* halt the cpu for common infrastructure */
> s390_cpu_halt(cpu);
> break;
> - case CPU_STATE_OPERATING:
> - case CPU_STATE_LOAD:
> + case S390_CPU_STATE_OPERATING:
> + case S390_CPU_STATE_LOAD:
> /*
> * Starting a CPU with a PSW WAIT bit set:
> * KVM: handles this internally and triggers another WAIT exit.
> diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
> index 21ce40d..66baa7a 100644
> --- a/target/s390x/cpu.h
> +++ b/target/s390x/cpu.h
> @@ -141,12 +141,9 @@ struct CPUS390XState {
> * architectures, there is a difference between a halt and a stop on
> s390.
> * If all cpus are either stopped (including check stop) or in the
> disabled
> * wait state, the vm can be shut down.
> + * The acceptable cpu_state values are defined in the CpuInfoS390State
> + * enum.
> */
> -#define CPU_STATE_UNINITIALIZED 0x00
> -#define CPU_STATE_STOPPED 0x01
> -#define CPU_STATE_CHECK_STOP 0x02
> -#define CPU_STATE_OPERATING 0x03
> -#define CPU_STATE_LOAD 0x04
> uint8_t cpu_state;
>
> /* currently processed sigp order */
> diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c
> index 0301e9d..45dd1c5 100644
> --- a/target/s390x/kvm.c
> +++ b/target/s390x/kvm.c
> @@ -1881,16 +1881,16 @@ int kvm_s390_set_cpu_state(S390CPU *cpu, uint8_t
> cpu_state)
> }
>
> switch (cpu_state) {
> - case CPU_STATE_STOPPED:
> + case S390_CPU_STATE_STOPPED:
> mp_state.mp_state = KVM_MP_STATE_STOPPED;
> break;
> - case CPU_STATE_CHECK_STOP:
> + case S390_CPU_STATE_CHECK_STOP:
> mp_state.mp_state = KVM_MP_STATE_CHECK_STOP;
> break;
> - case CPU_STATE_OPERATING:
> + case S390_CPU_STATE_OPERATING:
> mp_state.mp_state = KVM_MP_STATE_OPERATING;
> break;
> - case CPU_STATE_LOAD:
> + case S390_CPU_STATE_LOAD:
> mp_state.mp_state = KVM_MP_STATE_LOAD;
> break;
> default:
> diff --git a/target/s390x/sigp.c b/target/s390x/sigp.c
> index ac3f8e7..5a7a9c4 100644
> --- a/target/s390x/sigp.c
> +++ b/target/s390x/sigp.c
> @@ -46,13 +46,13 @@ static void sigp_sense(S390CPU *dst_cpu, SigpInfo *si)
> }
>
> /* sensing without locks is racy, but it's the same for real hw */
> - if (state != CPU_STATE_STOPPED && !ext_call) {
> + if (state != S390_CPU_STATE_STOPPED && !ext_call) {
> si->cc = SIGP_CC_ORDER_CODE_ACCEPTED;
> } else {
> if (ext_call) {
> status |= SIGP_STAT_EXT_CALL_PENDING;
> }
> - if (state == CPU_STATE_STOPPED) {
> + if (state == S390_CPU_STATE_STOPPED) {
> status |= SIGP_STAT_STOPPED;
> }
> set_sigp_status(si, status);
> @@ -94,12 +94,12 @@ static void sigp_start(CPUState *cs, run_on_cpu_data arg)
> S390CPU *cpu = S390_CPU(cs);
> SigpInfo *si = arg.host_ptr;
>
> - if (s390_cpu_get_state(cpu) != CPU_STATE_STOPPED) {
> + if (s390_cpu_get_state(cpu) != S390_CPU_STATE_STOPPED) {
> si->cc = SIGP_CC_ORDER_CODE_ACCEPTED;
> return;
> }
>
> - s390_cpu_set_state(CPU_STATE_OPERATING, cpu);
> + s390_cpu_set_state(S390_CPU_STATE_OPERATING, cpu);
> si->cc = SIGP_CC_ORDER_CODE_ACCEPTED;
> }
>
> @@ -108,14 +108,14 @@ static void sigp_stop(CPUState *cs, run_on_cpu_data arg)
> S390CPU *cpu = S390_CPU(cs);
> SigpInfo *si = arg.host_ptr;
>
> - if (s390_cpu_get_state(cpu) != CPU_STATE_OPERATING) {
> + if (s390_cpu_get_state(cpu) != S390_CPU_STATE_OPERATING) {
> si->cc = SIGP_CC_ORDER_CODE_ACCEPTED;
> return;
> }
>
> /* disabled wait - sleeping in user space */
> if (cs->halted) {
> - s390_cpu_set_state(CPU_STATE_STOPPED, cpu);
> + s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
> } else {
> /* execute the stop function */
> cpu->env.sigp_order = SIGP_STOP;
> @@ -130,17 +130,17 @@ static void sigp_stop_and_store_status(CPUState *cs,
> run_on_cpu_data arg)
> SigpInfo *si = arg.host_ptr;
>
> /* disabled wait - sleeping in user space */
> - if (s390_cpu_get_state(cpu) == CPU_STATE_OPERATING && cs->halted) {
> - s390_cpu_set_state(CPU_STATE_STOPPED, cpu);
> + if (s390_cpu_get_state(cpu) == S390_CPU_STATE_OPERATING && cs->halted) {
> + s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
> }
>
> switch (s390_cpu_get_state(cpu)) {
> - case CPU_STATE_OPERATING:
> + case S390_CPU_STATE_OPERATING:
> cpu->env.sigp_order = SIGP_STOP_STORE_STATUS;
> cpu_inject_stop(cpu);
> /* store will be performed in do_stop_interrup() */
> break;
> - case CPU_STATE_STOPPED:
> + case S390_CPU_STATE_STOPPED:
> /* already stopped, just store the status */
> cpu_synchronize_state(cs);
> s390_store_status(cpu, S390_STORE_STATUS_DEF_ADDR, true);
> @@ -156,7 +156,7 @@ static void sigp_store_status_at_address(CPUState *cs,
> run_on_cpu_data arg)
> uint32_t address = si->param & 0x7ffffe00u;
>
> /* cpu has to be stopped */
> - if (s390_cpu_get_state(cpu) != CPU_STATE_STOPPED) {
> + if (s390_cpu_get_state(cpu) != S390_CPU_STATE_STOPPED) {
> set_sigp_status(si, SIGP_STAT_INCORRECT_STATE);
> return;
> }
> @@ -186,7 +186,7 @@ static void sigp_store_adtl_status(CPUState *cs,
> run_on_cpu_data arg)
> }
>
> /* cpu has to be stopped */
> - if (s390_cpu_get_state(cpu) != CPU_STATE_STOPPED) {
> + if (s390_cpu_get_state(cpu) != S390_CPU_STATE_STOPPED) {
> set_sigp_status(si, SIGP_STAT_INCORRECT_STATE);
> return;
> }
> @@ -229,17 +229,17 @@ static void sigp_restart(CPUState *cs, run_on_cpu_data
> arg)
> SigpInfo *si = arg.host_ptr;
>
> switch (s390_cpu_get_state(cpu)) {
> - case CPU_STATE_STOPPED:
> + case S390_CPU_STATE_STOPPED:
> /* the restart irq has to be delivered prior to any other pending
> irq */
> cpu_synchronize_state(cs);
> /*
> * Set OPERATING (and unhalting) before loading the restart PSW.
> * load_psw() will then properly halt the CPU again if necessary
> (TCG).
> */
> - s390_cpu_set_state(CPU_STATE_OPERATING, cpu);
> + s390_cpu_set_state(S390_CPU_STATE_OPERATING, cpu);
> do_restart_interrupt(&cpu->env);
> break;
> - case CPU_STATE_OPERATING:
> + case S390_CPU_STATE_OPERATING:
> cpu_inject_restart(cpu);
> break;
> }
> @@ -285,7 +285,7 @@ static void sigp_set_prefix(CPUState *cs, run_on_cpu_data
> arg)
> }
>
> /* cpu has to be stopped */
> - if (s390_cpu_get_state(cpu) != CPU_STATE_STOPPED) {
> + if (s390_cpu_get_state(cpu) != S390_CPU_STATE_STOPPED) {
> set_sigp_status(si, SIGP_STAT_INCORRECT_STATE);
> return;
> }
> @@ -318,7 +318,7 @@ static void sigp_cond_emergency(S390CPU *src_cpu, S390CPU
> *dst_cpu,
> p_asn = dst_cpu->env.cregs[4] & 0xffff; /* Primary ASN */
> s_asn = dst_cpu->env.cregs[3] & 0xffff; /* Secondary ASN */
>
> - if (s390_cpu_get_state(dst_cpu) != CPU_STATE_STOPPED ||
> + if (s390_cpu_get_state(dst_cpu) != S390_CPU_STATE_STOPPED ||
> (psw_mask & psw_int_mask) != psw_int_mask ||
> (idle && psw_addr != 0) ||
> (!idle && (asn == p_asn || asn == s_asn))) {
> @@ -435,7 +435,7 @@ static int sigp_set_architecture(S390CPU *cpu, uint32_t
> param,
> if (cur_cpu == cpu) {
> continue;
> }
> - if (s390_cpu_get_state(cur_cpu) != CPU_STATE_STOPPED) {
> + if (s390_cpu_get_state(cur_cpu) != S390_CPU_STATE_STOPPED) {
> all_stopped = false;
> }
> }
> @@ -492,7 +492,7 @@ void do_stop_interrupt(CPUS390XState *env)
> {
> S390CPU *cpu = s390_env_get_cpu(env);
>
> - if (s390_cpu_set_state(CPU_STATE_STOPPED, cpu) == 0) {
> + if (s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu) == 0) {
> qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
> }
> if (cpu->env.sigp_order == SIGP_STOP_STORE_STATUS) {
>
Looks like you dropped my r-b.
--
Thanks,
David / dhildenb
Re: [qemu-s390x] [PATCHv2 3/3] qmp: add architecture specific cpu data for query-cpus-fast, Eric Blake, 2018/02/14
Re: [qemu-s390x] [PATCHv2 0/3] add query-cpu-fast and related s390 changes, Cornelia Huck, 2018/02/14