[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature
From: |
Cornelia Huck |
Subject: |
Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature |
Date: |
Wed, 17 Jan 2018 15:37:27 +0100 |
On Wed, 17 Jan 2018 15:18:48 +0100
Christian Borntraeger <address@hidden> wrote:
> We need to handle the bpb control on reset and migration. Normally
> stfle.82 is transparent (and the normal guest part works without
> hypervisor activity). To prevent any issues we require full
> host kernel support for this feature.
>
> Signed-off-by: Christian Borntraeger <address@hidden>
> ---
> target/s390x/cpu.c | 1 +
> target/s390x/cpu.h | 1 +
> target/s390x/cpu_features.c | 1 +
> target/s390x/cpu_features_def.h | 1 +
> target/s390x/gen-features.c | 1 +
> target/s390x/kvm.c | 16 ++++++++++++++++
> target/s390x/machine.c | 17 +++++++++++++++++
> 7 files changed, 38 insertions(+)
>
> diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c
> index ae3cee9..1577b2c 100644
> --- a/target/s390x/cpu.c
> +++ b/target/s390x/cpu.c
> @@ -89,6 +89,7 @@ static void s390_cpu_reset(CPUState *s)
> CPUS390XState *env = &cpu->env;
>
> env->pfault_token = -1UL;
> + env->bpbc = 0;
> scc->parent_reset(s);
> cpu->env.sigp_order = 0;
> s390_cpu_set_state(CPU_STATE_STOPPED, cpu);
> diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
> index 1a8b6b9..8514905 100644
> --- a/target/s390x/cpu.h
> +++ b/target/s390x/cpu.h
> @@ -93,6 +93,7 @@ struct CPUS390XState {
>
> uint32_t fpc; /* floating-point control register */
> uint32_t cc_op;
> + uint8_t bpbc; /* branch prediction blocking */
>
> float_status fpu_status; /* passed to softfloat lib */
>
> diff --git a/target/s390x/cpu_features.c b/target/s390x/cpu_features.c
> index 31a4676..5d1c210 100644
> --- a/target/s390x/cpu_features.c
> +++ b/target/s390x/cpu_features.c
> @@ -89,6 +89,7 @@ static const S390FeatDef s390_features[] = {
> FEAT_INIT("msa4-base", S390_FEAT_TYPE_STFL, 77,
> "Message-security-assist-extension-4 facility (excluding subfunctions)"),
> FEAT_INIT("edat2", S390_FEAT_TYPE_STFL, 78, "Enhanced-DAT facility 2"),
> FEAT_INIT("dfppc", S390_FEAT_TYPE_STFL, 80, "Decimal-floating-point
> packed-conversion facility"),
> + FEAT_INIT("bpb", S390_FEAT_TYPE_STFL, 82, "Branch Prediction Blocking"),
No nice "facility" suffix? :)
> FEAT_INIT("vx", S390_FEAT_TYPE_STFL, 129, "Vector facility"),
> FEAT_INIT("iep", S390_FEAT_TYPE_STFL, 130,
> "Instruction-execution-protection facility"),
> FEAT_INIT("sea_esop2", S390_FEAT_TYPE_STFL, 131, "Side-effect-access
> facility and Enhanced-suppression-on-protection facility 2"),
> diff --git a/target/s390x/cpu_features_def.h b/target/s390x/cpu_features_def.h
> index 4b6d4e9..4487cfd 100644
> --- a/target/s390x/cpu_features_def.h
> +++ b/target/s390x/cpu_features_def.h
> @@ -80,6 +80,7 @@ typedef enum {
> S390_FEAT_MSA_EXT_4,
> S390_FEAT_EDAT_2,
> S390_FEAT_DFP_PACKED_CONVERSION,
> + S390_FEAT_BPB,
> S390_FEAT_VECTOR,
> S390_FEAT_INSTRUCTION_EXEC_PROT,
> S390_FEAT_SIDE_EFFECT_ACCESS_ESOP2,
> diff --git a/target/s390x/gen-features.c b/target/s390x/gen-features.c
> index b24f6ad..95ee870 100644
> --- a/target/s390x/gen-features.c
> +++ b/target/s390x/gen-features.c
> @@ -357,6 +357,7 @@ static uint16_t full_GEN7_GA1[] = {
> S390_FEAT_SIE_GPERE,
> S390_FEAT_SIE_IB,
> S390_FEAT_SIE_CEI,
> + S390_FEAT_BPB,
Will this be provided that far back on real hardware?
> };
>
> static uint16_t full_GEN7_GA2[] = {
> diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c
> index 6a18a41..3cd4fab 100644
> --- a/target/s390x/kvm.c
> +++ b/target/s390x/kvm.c
> @@ -490,6 +490,11 @@ int kvm_arch_put_registers(CPUState *cs, int level)
> cs->kvm_run->kvm_dirty_regs |= KVM_SYNC_GSCB;
> }
>
> + if (can_sync_regs(cs, KVM_SYNC_BPBC)) {
> + cs->kvm_run->s.regs.bpbc = env->bpbc;
> + cs->kvm_run->kvm_dirty_regs |= KVM_SYNC_BPBC;
> + }
> +
> /* Finally the prefix */
> if (can_sync_regs(cs, KVM_SYNC_PREFIX)) {
> cs->kvm_run->s.regs.prefix = env->psa;
> @@ -600,6 +605,10 @@ int kvm_arch_get_registers(CPUState *cs)
> memcpy(env->gscb, cs->kvm_run->s.regs.gscb, 32);
> }
>
> + if (can_sync_regs(cs, KVM_SYNC_BPBC)) {
> + env->bpbc = cs->kvm_run->s.regs.bpbc;
> + }
> +
> /* pfault parameters */
> if (can_sync_regs(cs, KVM_SYNC_PFAULT)) {
> env->pfault_token = cs->kvm_run->s.regs.pft;
> @@ -2278,6 +2287,13 @@ void kvm_s390_get_host_cpu_model(S390CPUModel *model,
> Error **errp)
> clear_bit(S390_FEAT_CMM_NT, model->features);
> }
>
> + /* stfle.82 is a transparent bit. As there is some state attached
> + * anyway we only enable this bit if the host kernel can handle
> + * migrate and reset */
Having a transparent bit with some state attached seems a bit odd...
> + if (!kvm_check_extension(kvm_state, KVM_CAP_S390_BPB)) {
> + clear_bit(S390_FEAT_BPB, model->features);
> + }
> +
> /* We emulate a zPCI bus and AEN, therefore we don't need HW support */
> if (pci_available) {
> set_bit(S390_FEAT_ZPCI, model->features);
- [qemu-s390x] [PATCH/RFC 0/3] s390x/kvm: implement new hardware/firmware features, Christian Borntraeger, 2018/01/17
- [qemu-s390x] [PATCH 1/3] header sync, Christian Borntraeger, 2018/01/17
- [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, Christian Borntraeger, 2018/01/17
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, David Hildenbrand, 2018/01/17
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature,
Cornelia Huck <=
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, David Hildenbrand, 2018/01/17
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, Christian Borntraeger, 2018/01/17
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, David Hildenbrand, 2018/01/17
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, Christian Borntraeger, 2018/01/17
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, David Hildenbrand, 2018/01/17
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, Cornelia Huck, 2018/01/17
- Re: [qemu-s390x] [Qemu-devel] [PATCH 2/3] s390x/kvm: Handle bpb feature, Halil Pasic, 2018/01/17
- Re: [qemu-s390x] [Qemu-devel] [PATCH 2/3] s390x/kvm: Handle bpb feature, David Hildenbrand, 2018/01/17
- Re: [qemu-s390x] [PATCH 2/3] s390x/kvm: Handle bpb feature, Christian Borntraeger, 2018/01/17
[qemu-s390x] [PATCH 3/3] s390x/cpumodel: fix transparency for non-hyp STFL features, Christian Borntraeger, 2018/01/17