Re: [qemu-s390x] [RFC PATCH 0/3] vfio: ccw: basic channel path event handling

[Dong Jia Shi]

* Cornelia Huck <address@hidden> [2018-01-11 11:54:22 +0100]:

> On Thu, 11 Jan 2018 04:04:18 +0100
> Dong Jia Shi <address@hidden> wrote:
> 
> > Hi Folks,
> > 
> > Background
> > ==========
> > 
> > Some days ago, we had a discussion on the topic of channel path 
> > virtualization.
> > Ref:
> > Subject: [PATCH 0/3] Channel Path realted CRW generation
> > Message-Id: <address@hidden>
> > URL: https://lists.nongnu.org/archive/html/qemu-devel/2017-07/msg08414.html
> > 
> > Indeed that thread is not short and discussed many aspects in a
> > non-concentrated manner. The parts those are most valuable to me are:
> > 1. a re-modelling for channel path is surely the best offer, but is not
> >    possible to have in the near future.
> > 2. to enhance the path related functionalities, using PNO and PNOM might
> >    be something we can do for now. This may be something that I could 
> > improve
> >    without model related arguments.
> > 
> > So here I have this series targeting to add basic channel path event 
> > handling
> > for vfio-ccw -- no touch of the channel path modelling in both the kernel 
> > and
> > the QEMU side, but find a way to sync path status change to guest lazily 
> > using
> > SCSW_FLAGS_MASK_PNO and pmcw->pnom.  In short, I want to enhance path 
> > related
> > stuff (to be more specific: sync up path status to the guest) on a best 
> > effort
> > basis, which means in a way that won't get us invloed to do channel path
> > re-modelling.
> 
> The guest should also get the updated PIM/PAM/POM, shouldn't it?
> 
Yes. The following values will be updated for the guest:
PMCW:
  - PIM/PAM/POM
  - PNOM
  - CHPIDs
SCSW
  - PNOM bit

See vfio_ccw_update_schib in patch #4 of the QEMU series.

> > 
> > What benifit can we get from this? The administrator of a virtual machine 
> > can
> > get uptodate (in some extent) status of the current using channel paths, so
> > he/she can monitor paths status and get path problem noticed timely (see the
> > example below).
> > 
> > I think we can start a new round discussion based on this series. So 
> > reviewers
> > can give their comments based on some code, and then we can decide if this 
> > is
> > we want or not.
> > 
> > As flagged with RFC, the intention of this series is to show what I have for
> > now, and what could the code look like in general. Thus I can get some early
> > feedbacks. I would expect to see opinions on:
> > - is the target (mentioned above) of this series welcomed or not.
> 
> It certainly makes sense to have a way to get an updated schib.
> 
:)

> > - is the approach of this series good or bad.
> 
> Still need to read :)
> 
> > So I can either move on with this (or with other suggested approach) or 
> > leave
> > it alone.
> > 
> > Basic Introduction of The Patches
> > =================================
> > 
> > This is the kernel counterpart, which mainly does:
> > 1. add a schib vfio region for userland to _store_ subchannel information.
> > 2. add a channel path vfio irq to notify userland with chp status change 
> > event.
> > 3. add .chp_event handler for vfio-ccw driver, so the driver handles chp 
> > event,
> >    and signals userland about the event.
> 
> Do you plan to trigger schib updates for things other than path events?
> 
This is surely a good question... and my answer is no. If the other
fields are handled by QEMU well, then we don't need to trigger update
events for them. Currently I don't find things that need extra trigger.

> > 
> > With the above work, userland can be signaled with chp related event, and 
> > then
> > it can read out uptodate SCHIB from the new region, and sync up path related
> > information to the corresponding virtual subchannel. So a guest can sense 
> > the
> > path update in some extent.
> 
> That's basically what Linux could do before implementing chpid related
> machine checks, so it should be at least helpful.
> 
> > 
> > For the QEMU counterpart, please ref:
> > [RFC PATCH 0/5] vfio/ccw: basic channel path event handling
> > 
> > The QEMU counterpart mainly does:
> > 1. add handling of the schib region, so that it can read out the newest 
> > schib
> >    information.
> > 2. add handling of the chp irq, so that it can get notification of channel 
> > path
> >    status change.
> > 3. once there is a chp status event, synchronize related information from 
> > the
> >    newest schib information to guest lazily.
> > 
> > What are still missing, thus need to be offered in the next version are:
> > - I/O termination and FSM state handling if currently we have I/O on the 
> > status
> >   switched path.
> 
> I'm wondering up to which extent we should involve ourselves here. The
> normal I/O subchannel driver handles all the path related things; but
> for vfio, we basically want to hand the subchannel to the guest and not
> involve ourselves in management.
Nod.

> A configure off does an SCLP command; does that already have an impact
> on running commands? (I can't check myself due to lack of public
> documentation, sadly.)
> 
Yes, for I/O operations that do not end before the command is performed,
the requirements are those of channel-path reset. See:
- PoP 17-12 Channel-Path Reset
- PoP 14-9 RESET CHANNEL PATH

So this means that there is really no need on the host to terminate
ongoing I/O on the chp that is configured off I think now.

> > - Vary on/off event is not sensible to a guest.
> 
> As vary on/off basically means manipulating some internal masks and
> updating path groups if applicable, I'm not sure how much we
> could/should do here anyway.
> 
This is really a good point. Now I think it's ok to even ignore this
event in the vfio-ccw driver.

> > 
> > Example
> > =======
> > 
> > With both the kernel and Qemu parts applied, we can notice some new 
> > behaviors
> > of a channel path when we have a guest with a passed through vfio-ccw device
> > using it. The guest can reflect the chp status change of the host side 
> > lazily,
> > and synchronize the updated information.
> > 
> > For example:
> > 0. Prepare a vfio subchannel on the host:
> > address@hidden ~]# lscss --vfio 013f
> 
> Oh, is this a new option? In which version had it been added? (My
> Fedora 26 LPAR does not yet have it.)
>
Yes. ;)

I use a lscss version that was re-written in C language. I added it in
the version after the following one:
    lscss version 1.37.1-build-20170609

[...]

> > 6. On the guest, check the status again:
> > address@hidden ~]# lscss 0002
> > Device   Subchan.  DevType CU Type Use  PIM PAM POM  CHPIDs
> > ----------------------------------------------------------------------
> > 0.0.3f3f 0.0.0002  3390/0c 3990/e9      f0  70  ff   42434445 00000000 
> > #Notice: No change!
> > 
> > address@hidden ~]# chccwdev -d 3f3f
> > Setting device 0.0.3f3f offline
> > Done
> > 
> > address@hidden ~]# lscss 0002
> > Device   Subchan.  DevType CU Type Use  PIM PAM POM  CHPIDs
> > ----------------------------------------------------------------------
> > 0.0.3f3f 0.0.0002  3390/0c 3990/e9      f0  f0  ff   42434445 00000000 
> > #Notice: PAM changed again.
> 
> Yes, that looks reasonable. The guest being aware of changed masks only
> if it actually did something that triggered path verification is
> probably the best we can do without implementing channel path machine
> checks.
> 
Good to know this is reasonable. So I can keep working on this.

-- 
Dong Jia Shi