Re: [qemu-s390x] [Qemu-devel] [PATCH v3 2/7] s390x/pci: rework PCI STORE

[Pierre Morel]

On 23/11/2017 10:01, Thomas Huth wrote:
> On 22.11.2017 23:05, Pierre Morel wrote:
> > Enhance the fault detection, correction of the fault reporting.
> >
> > Signed-off-by: Pierre Morel <address@hidden>
> > Reviewed-by: Yi Min Zhao <address@hidden>
> > ---
> >   hw/s390x/s390-pci-inst.c | 39 ++++++++++++++++++++++-----------------
> >   1 file changed, 22 insertions(+), 17 deletions(-)
> >
> > diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
> > index 3e1f1a0..930c197 100644
> > --- a/hw/s390x/s390-pci-inst.c
> > +++ b/hw/s390x/s390-pci-inst.c
> > @@ -470,6 +470,12 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t 
> > r2)
> >       pcias = (env->regs[r2] >> 16) & 0xf;
> >       len = env->regs[r2] & 0xf;
> >       offset = env->regs[r2 + 1];
> > +    data = env->regs[r1];
> > +
> > +    if (!(fh & FH_MASK_ENABLE)) {
> > +        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
> > +        return 0;
> > +    }
> >   
> >       pbdev = s390_pci_find_dev_by_fh(s390_get_phb(), fh);
> >       if (!pbdev) {
> > @@ -479,12 +485,7 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t 
> > r2)
> >       }
> >   
> >       switch (pbdev->state) {
> > -    case ZPCI_FS_RESERVED:
> > -    case ZPCI_FS_STANDBY:
> > -    case ZPCI_FS_DISABLED:
> >       case ZPCI_FS_PERMANENT_ERROR:
> > -        setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
> > -        return 0;
> >       case ZPCI_FS_ERROR:
> >           setcc(cpu, ZPCI_PCI_LS_ERR);
> >           s390_set_status_code(env, r2, ZPCI_PCI_ST_BLOCKED);
>
> -EMISSINGPUBLICDOCUMENTATION

Hi Thomas,

I do not understand what you mean here

> > @@ -493,9 +494,13 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t 
> > r2)
> >           break;
> >       }
> >   
> > -    data = env->regs[r1];
> > -    if (pcias < 6) {
> > -        if ((8 - (offset & 0x7)) < len) {
> > +    switch (pcias) {
> > +        /* A ZPCI PCI card may use any BAR from BAR 0 to BAR 5 */
> > +    case 0 ... 5:
> > +        /* Check length:
> > +         * A length of 0 is invalid and length should not cross a double word
> > +         */
> > +        if (!len || (len > (8 - (offset & 0x7)))) {
> >               program_interrupt(env, PGM_OPERAND, 4);
> >               return 0;
> >           }
> > @@ -513,21 +518,21 @@ int pcistg_service_call(S390CPU *cpu, uint8_t r1, uint8_t 
> > r2)
> >               program_interrupt(env, PGM_OPERAND, 4);
> >               return 0;
> >           }
> > -    } else if (pcias == 15) {
> > -        if ((4 - (offset & 0x3)) < len) {
> > -            program_interrupt(env, PGM_OPERAND, 4);
> > -            return 0;
> > -        }
> > -
> > -        if (zpci_endian_swap(&data, len)) {
> > +        break;
> > +    case 15:
> > +        /* ZPCI uses the pseudo BAR number 15 as configuration space */
> > +        /* possible access lengths are 1,2,4 and must not cross a word */
> > +        if (!len || (len > (4 - (offset & 0x3))) || len == 3) {
> >               program_interrupt(env, PGM_OPERAND, 4);
> >               return 0;
> >           }
> > -
> > +        /* len = 1,2,4 so we do not need to test */
> > +        zpci_endian_swap(&data, len);
> >           pci_host_config_write_common(pbdev->pdev, offset,
> >                                        pci_config_size(pbdev->pdev),
> >                                        data, len);
> > -    } else {
> > +        break;
> > +    default:
> >           DPRINTF("pcistg invalid space\n");
> >           setcc(cpu, ZPCI_PCI_LS_ERR);
> >           s390_set_status_code(env, r2, ZPCI_PCI_ST_INVAL_AS);
>
> At least the last two hunks looks fine to me. If you want to have a
> Reviewed-by for this, you could maybe put these two hunks into a
> separate patch instead?

I do not understand what yo umean with the first one.
Can you explain?

Thanks

Pierre

>   Thomas


--
Pierre Morel
Linux/KVM/QEMU in Böblingen - Germany