[Qemu-riscv] [PATCH v3 19/28] riscv: sifive_u: Instantiate OTP memory with a serial number

[Bin Meng]

This adds an OTP memory with a given serial number to the sifive_u
machine. With such support, the upstream U-Boot for sifive_fu540
boots out of the box on the sifive_u machine.

Signed-off-by: Bin Meng <address@hidden>
---

Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_u.c         | 5 +++++
 include/hw/riscv/sifive_u.h | 1 +
 2 files changed, 6 insertions(+)

diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c
index 5022b8f..486b247 100644
--- a/hw/riscv/sifive_u.c
+++ b/hw/riscv/sifive_u.c
@@ -10,6 +10,7 @@
  * 1) CLINT (Core Level Interruptor)
  * 2) PLIC (Platform Level Interrupt Controller)
  * 3) PRCI (Power, Reset, Clock, Interrupt)
+ * 4) OTP (One-Time Programmable) memory with stored serial number
  *
  * This board currently generates devicetree dynamically that indicates at 
least
  * two harts and up to five harts.
@@ -43,6 +44,7 @@
 #include "hw/riscv/sifive_clint.h"
 #include "hw/riscv/sifive_uart.h"
 #include "hw/riscv/sifive_u.h"
+#include "hw/riscv/sifive_u_otp.h"
 #include "hw/riscv/sifive_u_prci.h"
 #include "hw/riscv/boot.h"
 #include "chardev/char.h"
@@ -65,10 +67,12 @@ static const struct MemmapEntry {
     [SIFIVE_U_PRCI] =     { 0x10000000,     0x1000 },
     [SIFIVE_U_UART0] =    { 0x10010000,     0x1000 },
     [SIFIVE_U_UART1] =    { 0x10011000,     0x1000 },
+    [SIFIVE_U_OTP] =      { 0x10070000,     0x1000 },
     [SIFIVE_U_DRAM] =     { 0x80000000,        0x0 },
     [SIFIVE_U_GEM] =      { 0x100900FC,     0x2000 },
 };
 
+#define SIFIVE_OTP_SERIAL   1
 #define GEM_REVISION        0x10070109
 
 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
@@ -441,6 +445,7 @@ static void riscv_sifive_u_soc_realize(DeviceState *dev, 
Error **errp)
         memmap[SIFIVE_U_CLINT].size, ms->smp.cpus,
         SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE);
     sifive_u_prci_create(memmap[SIFIVE_U_PRCI].base);
+    sifive_u_otp_create(memmap[SIFIVE_U_OTP].base, SIFIVE_OTP_SERIAL);
 
     for (i = 0; i < SIFIVE_U_PLIC_NUM_SOURCES; i++) {
         plic_gpios[i] = qdev_get_gpio_in(DEVICE(s->plic), i);
diff --git a/include/hw/riscv/sifive_u.h b/include/hw/riscv/sifive_u.h
index e318ecb..3ae75b5 100644
--- a/include/hw/riscv/sifive_u.h
+++ b/include/hw/riscv/sifive_u.h
@@ -54,6 +54,7 @@ enum {
     SIFIVE_U_PRCI,
     SIFIVE_U_UART0,
     SIFIVE_U_UART1,
+    SIFIVE_U_OTP,
     SIFIVE_U_DRAM,
     SIFIVE_U_GEM
 };
-- 
2.7.4