Re: [Qemu-riscv] [Qemu-devel] [PATCH v3] tests/boot_linux_console: add a test for riscv64 + virt

[Alistair Francis]

On Fri, Jul 26, 2019 at 10:12 AM Chih-Min Chao <address@hidden> wrote:
>
>
>
> On Thu, Jul 25, 2019 at 8:12 AM Alistair Francis <address@hidden> wrote:
>>
>> On Tue, Jul 23, 2019 at 11:46 PM Chih-Min Chao <address@hidden> wrote:
>> >
>> > Similar to the mips + malta test, it boots a Linux kernel on a virt
>> > board and verify the serial is working.  Also, it relies on the serial
>> > device set by the machine itself.
>> >
>> > If riscv64 is a target being built, "make check-acceptance" will
>> > automatically include this test by the use of the "arch:riscv64" tags.
>> >
>> > Alternatively, this test can be run using:
>> >
>> >   $ avocado run -t arch:riscv64 tests/acceptance
>> >
>> > packages
>> >   debian official
>> >     binutils-riscv64-linux-gnu_2.32-8
>> >     opensbi_0.4-1_all
>> >     linux-image-5.0.0-trunk-riscv64 5.0.2-1~exp1
>> >   third-party
>> >     
>> > https://github.com/groeck/linux-build-test/rootfs/riscv64/rootfs.cpio.gz
>> >     (the repo is also used in mips target acceptance)
>> >
>> > Signed-off-by: Chih-Min Chao <address@hidden>
>> > ---
>> >  .travis.yml                            |  2 +-
>> >  tests/acceptance/boot_linux_console.py | 67 
>> > ++++++++++++++++++++++++++++++++++
>> >  2 files changed, 68 insertions(+), 1 deletion(-)
>> >
>> > diff --git a/.travis.yml b/.travis.yml
>> > index caf0a1f..7ba9952 100644
>> > --- a/.travis.yml
>> > +++ b/.travis.yml
>> > @@ -232,7 +232,7 @@ matrix:
>> >
>> >      # Acceptance (Functional) tests
>> >      - env:
>> > -        - CONFIG="--python=/usr/bin/python3 
>> > --target-list=x86_64-softmmu,mips-softmmu,mips64el-softmmu,aarch64-softmmu,arm-softmmu,s390x-softmmu,alpha-softmmu"
>> > +        - CONFIG="--python=/usr/bin/python3 
>> > --target-list=x86_64-softmmu,mips-softmmu,mips64el-softmmu,aarch64-softmmu,arm-softmmu,s390x-softmmu,alpha-softmmu,riscv64-softmmu"
>> >          - TEST_CMD="make check-acceptance"
>> >        after_failure:
>> >          - cat tests/results/latest/job.log
>> > diff --git a/tests/acceptance/boot_linux_console.py 
>> > b/tests/acceptance/boot_linux_console.py
>> > index 3215950..b0569b9 100644
>> > --- a/tests/acceptance/boot_linux_console.py
>> > +++ b/tests/acceptance/boot_linux_console.py
>> > @@ -354,3 +354,70 @@ class BootLinuxConsole(Test):
>> >          self.vm.launch()
>> >          console_pattern = 'Kernel command line: %s' % kernel_command_line
>> >          self.wait_for_console_pattern(console_pattern)
>> > +
>> > +    def test_riscv64_virt(self):
>> > +        """
>> > +        :avocado: tags=arch:riscv64
>> > +        :avocado: tags=machine:virt
>> > +        """
>> > +        deb_url = ('https://snapshot.debian.org/archive/debian/'
>> > +                         '20190424T171759Z/pool/main/b/binutils/'
>> > +                         'binutils-riscv64-linux-gnu_2.32-8_amd64.deb')
>> > +        deb_hash = ('7fe376fd4452696c03acd508d6d613ca553ea15e')
>> > +        deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
>> > +        objcopy_path = '/usr/bin/riscv64-linux-gnu-objcopy'
>> > +        objcopy_path = self.extract_from_deb(deb_path, objcopy_path)
>> > +        libbfd_path = '/usr/lib/x86_64-linux-gnu/libbfd-2.32-riscv64.so'
>> > +        libbfd_path = self.extract_from_deb(deb_path, libbfd_path)
>> > +        process.run('ls -al %s' % (objcopy_path))
>>
>> Why do we need objcopy? Won't this not work on non x86 architectures?
>>
>> > +
>> > +        deb_url = ('https://snapshot.debian.org/archive/debian/'
>> > +                   '20190708T032337Z/pool/main/o/opensbi/'
>> > +                   'opensbi_0.4-1_all.deb')
>> > +        deb_hash = ('2319dcd702958291d323acf5649fd98a11d90112')
>> > +        deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
>> > +        opensbi_path = ('/usr/lib/riscv64-linux-gnu/opensbi/'
>> > +                        'qemu/virt/fw_jump.elf')
>> > +        opensbi_path = self.extract_from_deb(deb_path, opensbi_path)
>> > +
>> > +        deb_url = ('https://snapshot.debian.org/archive/debian-ports/'
>> > +                   '20190319T205124Z/pool-riscv64/main/l/linux/'
>> > +                   
>> > 'linux-image-5.0.0-trunk-riscv64_5.0.2-1~exp1_riscv64.deb')
>> > +        deb_hash = ('90155ed4b36673cbf7746a37cf3159c8f0b2857a')
>> > +        deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
>> > +        kernel_path = '/boot/vmlinux-5.0.0-trunk-riscv64'
>>
>> I thought we were swapping to using an Image file?
>>
>> Alistair
>>
>
>   For objcopy,
>          Philippe had the same question in PATCH v2 thread.  Debian 
> linux-kernel package only has vmlinux and riscv vmlinux  ELF header doesn't 
> contain the correct physical loading address 0x8020_0000.
>           What I think is to extract the Image from vmlinux by objcopy.  This 
> is what kernel do when generating  arch/riscv/boot/Image.

That is a real pain. I've never used Debian on RISC-V but that seems
strange that they don't build Image files. I think you should use a
Fedora kernel instead then.

>
>   For swapping to using an image file,
>          I think what you talk about is we have included opensbi.bin into 
> qemu master ?

That has already happened, but you don't need it included.

Alistair

>          The reason is the test use -initrd and -append to pass rootfs and 
> kernel command line option and the two options requires using of -kernel 
> option.
>          But -kernel option can't load the opensbi.bin to expected address.
>
> chihmin
>
>>
>> > +        kernel_path = self.extract_from_deb(deb_path, kernel_path)
>> > +        kimage_path = self.workdir + "/Image"
>> > +        env = os.environ
>> > +        env['LD_LIBRARY_PATH'] = ('%s:' % (os.path.dirname(libbfd_path)) +
>> > +                                 env.get('LD_LIBRARY_PATH', ''))
>> > +        process.run(('%s -O binary -O binary -R'
>> > +                     '.note -R .note.gnu.build-id -R .comment -S %s %s') %
>> > +                     (objcopy_path, kernel_path, kimage_path))
>> > +
>> > +        initrd_url = ('https://github.com/groeck/linux-build-test/raw/'
>> > +                      '8584a59ed9e5eb5ee7ca91f6d74bbb06619205b8/rootfs/'
>> > +                      'riscv64/rootfs.cpio.gz')
>> > +        initrd_hash = 'f4867d263754961b6f626cdcdc0cb334c47e3b49'
>> > +        initrd_path = self.fetch_asset(initrd_url, asset_hash=initrd_hash)
>> > +
>> > +        self.vm.set_machine('virt')
>> > +        self.vm.set_console()
>> > +        kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE
>> > +                               + 'console=ttyS0 noreboot')
>> > +        self.vm.add_args('-bios', "none",
>> > +                '-kernel', opensbi_path,
>> > +                '-device', 'loader,file=%s,addr=0x80200000' % 
>> > (kimage_path),
>> > +                '-initrd', initrd_path,
>> > +                '-append', kernel_command_line,
>> > +                '-no-reboot')
>> > +
>> > +        self.vm.launch()
>> > +        self.wait_for_console_pattern('Boot successful.')
>> > +
>> > +        self.exec_command_and_wait_for_pattern('cat /proc/cpuinfo',
>> > +                                               'isa')
>> > +        self.exec_command_and_wait_for_pattern('uname -a',
>> > +                                               'SMP Debian')
>> > +        self.exec_command_and_wait_for_pattern('reboot',
>> > +                                               'reboot: Restarting 
>> > system')
>> > --
>> > 2.7.4
>> >
>> >