Hi,
The skiboot merged in QEMU already has POWER10 support. This series
adds a minimum set of models (XIVE2, PHB5) to boot a baremetal POWER10
machine using the OpenPOWER firmware images.
The major change is the support for the interrupt controller of the
POWER10 processor. XIVE2 is very much like XIVE on POWER9 but the
register interface, the different MMIO regions, the XIVE internal
descriptors have gone through a major cleanup. It was easier to
duplicate the models then to try to adapt the current models.
XIVE2 adds some new set of features. Only some are modeled :
- Address-based trigger (AB5) mode. Activated by default on the
PHB5. When using ABT [1], the PHB5 offloads [2] all interrupt
management on the IC, this to improve latency.
- P9 compat mode. XIVE2 can be configured to provide a strict P9
interface for the TIMA.
- Automatic save & restore of thread context registers. Used in
KVM [3].
- 8bits thread id. Mostly to validate the model.
Thanks,
C.
[1]
https://github.com/open-power/skiboot/commit/2a7e3d203496a016cc90ce91eeb2c4e680ebd1d2
[2]
https://github.com/open-power/skiboot/commit/5b2d7c79a2049c1bedfaa8a9dfa19880f980b2ef
[3]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f5af0a978776
Changes in v3:
- rebased on upstream
Changes in v2:
- Most comments on v1 have been addressed independently and merged
Cédric Le Goater (18):
ppc/xive2: Introduce a XIVE2 core framework
ppc/xive2: Introduce a presenter matching routine
ppc/pnv: Add a XIVE2 controller to the POWER10 chip
ppc/pnv: Add a OCC model for POWER10
ppc/pnv: Add POWER10 quads
ppc/pnv: Add model for POWER10 PHB5 PCIe Host bridge
ppc/pnv: Add a HOMER model to POWER10
ppc/psi: Add support for StoreEOI and 64k ESB pages (POWER10)
ppc/xive2: Add support for notification injection on ESB pages
ppc/xive: Add support for PQ state bits offload
ppc/pnv: Add support for PQ offload on PHB5
ppc/pnv: Add support for PHB5 "Address-based trigger" mode
pnv/xive2: Introduce new capability bits
ppc/pnv: add XIVE Gen2 TIMA support
pnv/xive2: Add support XIVE2 P9-compat mode (or Gen1)
xive2: Add a get_config() handler for the router configuration
pnv/xive2: Add support for automatic save&restore
pnv/xive2: Add support for 8bits thread id
hw/intc/pnv_xive2_regs.h | 442 ++++++
include/hw/pci-host/pnv_phb4.h | 11 +
include/hw/pci-host/pnv_phb4_regs.h | 3 +
include/hw/ppc/pnv.h | 39 +
include/hw/ppc/pnv_homer.h | 3 +
include/hw/ppc/pnv_occ.h | 2 +
include/hw/ppc/pnv_xive.h | 71 +
include/hw/ppc/pnv_xscom.h | 15 +
include/hw/ppc/xive.h | 10 +-
include/hw/ppc/xive2.h | 109 ++
include/hw/ppc/xive2_regs.h | 210 +++
hw/intc/pnv_xive.c | 37 +-
hw/intc/pnv_xive2.c | 2127 +++++++++++++++++++++++++++
hw/intc/spapr_xive.c | 25 +
hw/intc/xive.c | 77 +-
hw/intc/xive2.c | 1017 +++++++++++++
hw/pci-host/pnv_phb4.c | 87 +-
hw/pci-host/pnv_phb4_pec.c | 44 +
hw/ppc/pnv.c | 265 +++-
hw/ppc/pnv_homer.c | 64 +
hw/ppc/pnv_occ.c | 16 +
hw/ppc/pnv_psi.c | 38 +-
hw/intc/meson.build | 4 +-
hw/pci-host/trace-events | 2 +
24 files changed, 4677 insertions(+), 41 deletions(-)
create mode 100644 hw/intc/pnv_xive2_regs.h
create mode 100644 include/hw/ppc/xive2.h
create mode 100644 include/hw/ppc/xive2_regs.h
create mode 100644 hw/intc/pnv_xive2.c
create mode 100644 hw/intc/xive2.c