[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[RFC PATCH v4] ppc/spapr: Add support for H_SCM_PERFORMANCE_STATS hcall
From: |
Vaibhav Jain |
Subject: |
[RFC PATCH v4] ppc/spapr: Add support for H_SCM_PERFORMANCE_STATS hcall |
Date: |
Wed, 26 May 2021 08:30:57 +0530 |
Add support for H_SCM_PERFORMANCE_STATS described at [1] for
spapr nvdimms. This enables guest to fetch performance stats[2] like
expected life of an nvdimm ('MemLife ') etc and display them to the
user. Linux kernel support for fetching these performance stats and
exposing them to the user-space was done via [3].
The hcall semantics mandate that each nvdimm performance stats is
uniquely identied by a 8-byte ascii string encoded as an unsigned
integer (e.g 'MemLife ' == 0x4D656D4C69666520) and its value be a
8-byte unsigned integer. These performance-stats are exchanged with
the guest in via a guest allocated buffer called
'requestAndResultBuffer' or rr-buffer for short. This buffer contains
a header descibed by 'struct papr_scm_perf_stats' followed by an array
of performance-stats described by 'struct papr_scm_perf_stat'. The
hypervisor is expected to validate the rr-buffer header and then based
on the request copy the needed performance-stats to the array of
'struct papr_scm_perf_stat' following the header.
The patch proposes a new function h_scm_performance_stats() that
services the H_SCM_PERFORMANCE_STATS hcall. After verifying the
validity of the rr-buffer header via scm_perf_check_rr_buffer() it
proceeds to fill the rr-buffer with requested performance-stats. The
value of individual stats is retrived from individual accessor
function for the stat which are indexed in the array
'nvdimm_perf_stats'.
References:
[1] "Hypercall Op-codes (hcalls)"
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst#n269
[2] Sysfs attribute documentation for papr_scm
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/ABI/testing/sysfs-bus-papr-pmem#n36
[3] "powerpc/papr_scm: Fetch nvdimm performance stats from PHYP"
https://lore.kernel.org/r/20200731064153.182203-2-vaibhav@linux.ibm.com
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
---
Changelog
Since RFC-v3:
* Introduced consistent types 'perf_stat_id/val' for handling
perf-stats in code rather than switching between u64 and char[8]. [
David Gibson ]
* Removed a redundant temporary variable 'stat_id' usage from
nvdimm_stat_getval() [ David Gibson ]
* Move the tests for buffer sizes around to a a central place in
h_scm_performance_stats() [ David Gibson ]
* Update the allocation size/type of rr-buffer in
h_scm_performance_stats [ David Gibson, Groug ]
* Reworked the loop for generating canned-response in
h_scm_performance_stats().
* Reworked logic for returning an unknown stat-id in h_scm_performance_stats().
Since RFC-v2:
* s/SCM_STATS_MAX_OUTPUT_BUFFER/SCM_STATS_MIN_OUTPUT_BUFFER/ thats the
minimum size buffer needed to return all supported performance
stats. Value for this is derived from size of array 'nvdimm_perf_stats'
* Added SCM_STATS_MAX_OUTPUT_BUFFER to indicate maximum supported
rr-buffer size from a guest. Value for this is derived from hard
limit of SCM_STATS_MAX_STATS.
* Updated scm_perf_check_rr_buffer() to add a check for max size of
rr-buffer. [David]
* Updated scm_perf_check_rr_buffer() to removed a reduntant check for
min size of rr-buffer [David]
* Updated h_scm_performance_stats() to have a single allocation for
rr-buffer and copy it back to guest memory in a single shot. [David]
Since RFC-v1:
* Removed empty lines from code [ David ]
* Updated struct papr_scm_perf_stat to use uint64_t for
statistic_id.
* Added a hard limit on max number of stats requested to 255 [ David ]
* Updated scm_perf_check_rr_buffer() to check for rr-buffer header
size [ David ]
* Removed a redundant check from nvdimm_stat_getval() [ David ]
* Removed a redundant call to address_space_access_valid() in
scm_perf_check_rr_buffer() [ David ]
* Instead of allocating a minimum size local buffer, allocate a max
possible size local rr-buffer. [ David ]
* Updated nvdimm_stat_getval() to set 'val' to '0' on error. [ David ]
* Updated h_scm_performance_stats() to use a canned-response method
for simplifying num_stats==0 case [ David ].
---
hw/ppc/spapr_nvdimm.c | 219 +++++++++++++++++++++++++++++++++++++++++
include/hw/ppc/spapr.h | 22 ++++-
2 files changed, 240 insertions(+), 1 deletion(-)
diff --git a/hw/ppc/spapr_nvdimm.c b/hw/ppc/spapr_nvdimm.c
index 252204e25f..81ab2811bc 100644
--- a/hw/ppc/spapr_nvdimm.c
+++ b/hw/ppc/spapr_nvdimm.c
@@ -35,6 +35,23 @@
/* SCM device is unable to persist memory contents */
#define PAPR_PMEM_UNARMED PPC_BIT(0)
+/* Maximum number of stats that we can return back in a single stat request */
+#define SCM_STATS_MAX_STATS 255
+
+/* Given _numstats_ != 0 calculate the size of RR buffer required */
+#define SCM_STATS_RR_BUFFER_SIZE(_numstats_) \
+ (sizeof(struct papr_scm_perf_stats) + \
+ sizeof(struct papr_scm_perf_stat) * \
+ (_numstats_))
+
+/* Maximum possible output buffer to fulfill a perf-stats request */
+#define SCM_STATS_MAX_OUTPUT_BUFFER \
+ (SCM_STATS_RR_BUFFER_SIZE(SCM_STATS_MAX_STATS))
+
+/* Minimum output buffer size needed to return all perf_stats except noopstat
*/
+#define SCM_STATS_MIN_OUTPUT_BUFFER (SCM_STATS_RR_BUFFER_SIZE\
+ (ARRAY_SIZE(nvdimm_perf_stats) - 1))
+
bool spapr_nvdimm_validate(HotplugHandler *hotplug_dev, NVDIMMDevice *nvdimm,
uint64_t size, Error **errp)
{
@@ -502,6 +519,207 @@ static target_ulong h_scm_health(PowerPCCPU *cpu,
SpaprMachineState *spapr,
return H_SUCCESS;
}
+static int perf_stat_noop(SpaprDrc *drc, perf_stat_id unused,
+ perf_stat_val *val)
+{
+ *val = 0;
+ return H_SUCCESS;
+}
+
+static int perf_stat_memlife(SpaprDrc *drc, perf_stat_id unused,
+ perf_stat_val *val)
+{
+ /* Assume full life available of an NVDIMM right now */
+ *val = 100;
+ return H_SUCCESS;
+}
+
+/*
+ * Holds all supported performance stats accessors. Each performance-statistic
+ * is uniquely identified by a 8-byte ascii string for example: 'MemLife '
+ * which indicate in percentage how much usage life of an nvdimm is remaining.
+ * 'NoopStat' which is primarily used to test support for retriving performance
+ * stats and also to replace unknown stats present in the rr-buffer.
+ *
+ */
+static const struct {
+ perf_stat_id stat_id;
+ int (*stat_getval)(SpaprDrc *drc, perf_stat_id id, perf_stat_val *val);
+} nvdimm_perf_stats[] = {
+ { "NoopStat", perf_stat_noop},
+ { "MemLife ", perf_stat_memlife},
+};
+
+/*
+ * Given a nvdimm drc and stat-name return its value. In case given stat-name
+ * isnt supported then return H_PARTIAL.
+ */
+static int nvdimm_stat_getval(SpaprDrc *drc, perf_stat_id id,
+ perf_stat_val *val)
+{
+ int index;
+
+ *val = 0;
+
+ /* Lookup the stats-id in the nvdimm_perf_stats table */
+ for (index = 0; index < ARRAY_SIZE(nvdimm_perf_stats); ++index) {
+ if (!memcmp(&nvdimm_perf_stats[index].stat_id, id,
+ sizeof(perf_stat_id))) {
+ return nvdimm_perf_stats[index].stat_getval(drc, id, val);
+ }
+ }
+ return H_PARTIAL;
+}
+
+/*
+ * Given a request & result buffer header verify its contents. Also
+ * buffer-size and number of stats requested are within our expected
+ * sane bounds.
+ */
+static int scm_perf_check_rr_buffer(struct papr_scm_perf_stats *header,
+ hwaddr addr, size_t size,
+ uint32_t *num_stats)
+{
+ size_t expected_buffsize;
+
+ /* Verify the header eyecather and version */
+ if (memcmp(&header->eye_catcher, SCM_STATS_EYECATCHER,
+ sizeof(header->eye_catcher))) {
+ return H_BAD_DATA;
+ }
+ if (be32_to_cpu(header->stats_version) != 0x1) {
+ return H_NOT_AVAILABLE;
+ }
+
+ /* verify that rr buffer has enough space */
+ *num_stats = be32_to_cpu(header->num_statistics);
+ if (*num_stats > SCM_STATS_MAX_STATS) {
+ /* Too many stats requested */
+ return H_P3;
+ }
+
+ expected_buffsize = *num_stats ?
+ SCM_STATS_RR_BUFFER_SIZE(*num_stats) : SCM_STATS_MIN_OUTPUT_BUFFER;
+ if (size < expected_buffsize) {
+ return H_P3;
+ }
+
+ return H_SUCCESS;
+}
+
+/*
+ * For a given DRC index (R3) return one ore more performance stats of an
nvdimm
+ * device in guest allocated Request-and-result buffer (rr-buffer) (R4) of
+ * given 'size' (R5). The rr-buffer consists of a header described by
+ * 'struct papr_scm_perf_stats' that embeds the 'stats_version' and
+ * 'num_statistics' fields. This is followed by an array of
+ * 'struct papr_scm_perf_stat'. Based on the request type the writes the
+ * performance into the array of 'struct papr_scm_perf_stat' embedded inside
+ * the rr-buffer provided by the guest.
+ * Special cases handled are:
+ * 'size' == 0 : Return the maximum possible size of rr-buffer
+ * 'size' != 0 && 'num_statistics == 0' : Return all possible performance stats
+ *
+ * In case there was an error fetching a specific stats (e.g stat-id unknown or
+ * any other error) then return the stat-id in R4 and also replace its stat
+ * entry in rr-buffer with 'NoopStat'
+ */
+static target_ulong h_scm_performance_stats(PowerPCCPU *cpu,
+ SpaprMachineState *spapr,
+ target_ulong opcode,
+ target_ulong *args)
+{
+ SpaprDrc *drc = spapr_drc_by_index(args[0]);
+ const hwaddr addr = args[1];
+ size_t size = args[2];
+ g_autofree struct papr_scm_perf_stats *perfstats = NULL;
+ struct papr_scm_perf_stat *stats;
+ perf_stat_val stat_val;
+ uint32_t num_stats;
+ int index;
+ long rc;
+
+ /* Ensure that the drc is valid & is valid PMEM dimm and is plugged in */
+ if (!drc || !drc->dev ||
+ spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
+ return H_PARAMETER;
+ }
+
+ /* Guest requested max buffer size for output buffer */
+ if (size == 0) {
+ args[0] = SCM_STATS_MIN_OUTPUT_BUFFER;
+ return H_SUCCESS;
+ }
+
+ /* verify size is enough to hold rr-buffer */
+ if (size < sizeof(struct papr_scm_perf_stats)) {
+ return H_BAD_DATA;
+ }
+
+ if (size > SCM_STATS_MAX_OUTPUT_BUFFER) {
+ return H_P3;
+ }
+
+ /* allocate enough buffer space locally for holding max stats */
+ perfstats = g_try_malloc0(size);
+ if (!perfstats) {
+ return H_NO_MEM;
+ }
+ stats = &perfstats->scm_statistics[0];
+
+ /* Read and verify rr-buffer */
+ rc = address_space_read(&address_space_memory, addr,
MEMTXATTRS_UNSPECIFIED,
+ perfstats, size);
+ if (rc != MEMTX_OK) {
+ return H_PRIVILEGE;
+ }
+ rc = scm_perf_check_rr_buffer(perfstats, addr, size, &num_stats);
+ if (rc != H_SUCCESS) {
+ return rc;
+ }
+
+ /* when returning all stats generate a canned response first */
+ if (num_stats == 0) {
+ /* Ignore 'noopstat' when generating canned response */
+ for (num_stats = 0; num_stats < ARRAY_SIZE(nvdimm_perf_stats) - 1;
+ ++num_stats) {
+ memcpy(&stats[num_stats].statistic_id,
+ nvdimm_perf_stats[num_stats + 1].stat_id,
+ sizeof(perf_stat_id));
+ }
+ }
+
+ /* Populate the rr-buffer with stat values */
+ for (args[0] = 0, index = 0; index < num_stats; ++index) {
+ rc = nvdimm_stat_getval(drc, stats[index].statistic_id, &stat_val);
+
+ /* On error add noop stat to rr buffer & save last inval stat-id */
+ if (rc != H_SUCCESS) {
+ if (!args[0]) {
+ memcpy(&args[0], stats[index].statistic_id,
+ sizeof(perf_stat_id));
+ }
+ memcpy(&stats[index].statistic_id, nvdimm_perf_stats[0].stat_id,
+ sizeof(perf_stat_id));
+ }
+ /* Caller expects stat values in BE encoding */
+ stats[index].statistic_value = cpu_to_be64(stat_val);
+ }
+
+ /* Update and copy the local rr-buffer back to guest */
+ perfstats->num_statistics = cpu_to_be32(num_stats);
+ g_assert(size <= SCM_STATS_MAX_OUTPUT_BUFFER);
+ rc = address_space_write(&address_space_memory, addr,
+ MEMTXATTRS_UNSPECIFIED, perfstats, size);
+
+ if (rc != MEMTX_OK) {
+ return H_PRIVILEGE;
+ }
+
+ /* Check if there was a failure in fetching any stat */
+ return args[0] ? H_PARTIAL : H_SUCCESS;
+}
+
static void spapr_scm_register_types(void)
{
/* qemu/scm specific hcalls */
@@ -511,6 +729,7 @@ static void spapr_scm_register_types(void)
spapr_register_hypercall(H_SCM_UNBIND_MEM, h_scm_unbind_mem);
spapr_register_hypercall(H_SCM_UNBIND_ALL, h_scm_unbind_all);
spapr_register_hypercall(H_SCM_HEALTH, h_scm_health);
+ spapr_register_hypercall(H_SCM_PERFORMANCE_STATS, h_scm_performance_stats);
}
type_init(spapr_scm_register_types)
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index bbf817af46..9e093b3a00 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -326,6 +326,7 @@ struct SpaprMachineState {
#define H_P8 -61
#define H_P9 -62
#define H_OVERLAP -68
+#define H_BAD_DATA -70
#define H_UNSUPPORTED_FLAG -256
#define H_MULTI_THREADS_ACTIVE -9005
@@ -539,8 +540,9 @@ struct SpaprMachineState {
#define H_SCM_UNBIND_MEM 0x3F0
#define H_SCM_UNBIND_ALL 0x3FC
#define H_SCM_HEALTH 0x400
+#define H_SCM_PERFORMANCE_STATS 0x418
-#define MAX_HCALL_OPCODE H_SCM_HEALTH
+#define MAX_HCALL_OPCODE H_SCM_PERFORMANCE_STATS
/* The hcalls above are standardized in PAPR and implemented by pHyp
* as well.
@@ -793,6 +795,24 @@ OBJECT_DECLARE_SIMPLE_TYPE(SpaprTceTable, SPAPR_TCE_TABLE)
DECLARE_INSTANCE_CHECKER(IOMMUMemoryRegion, SPAPR_IOMMU_MEMORY_REGION,
TYPE_SPAPR_IOMMU_MEMORY_REGION)
+/* Defs and structs exchanged with guest when reporting drc perf stats */
+#define SCM_STATS_EYECATCHER "SCMSTATS"
+
+typedef char perf_stat_id[8];
+typedef uint64_t perf_stat_val;
+
+struct QEMU_PACKED papr_scm_perf_stat {
+ perf_stat_id statistic_id;
+ perf_stat_val statistic_value;
+};
+
+struct QEMU_PACKED papr_scm_perf_stats {
+ uint8_t eye_catcher[8]; /* Should be “SCMSTATS” */
+ uint32_t stats_version; /* Should be 0x01 */
+ uint32_t num_statistics; /* Number of stats following */
+ struct papr_scm_perf_stat scm_statistics[]; /* Performance matrics */
+};
+
struct SpaprTceTable {
DeviceState parent;
uint32_t liobn;
--
2.31.1
- [RFC PATCH v4] ppc/spapr: Add support for H_SCM_PERFORMANCE_STATS hcall,
Vaibhav Jain <=