[PATCH v3 5/7] spapr_drc.c: introduce unplug_timeout_timer

[Daniel Henrique Barboza]

The LoPAR spec provides no way for the guest kernel to report failure of
hotplug/hotunplug events. This wouldn't be bad if those operations were
granted to always succeed, but that's far for the reality.

What ends up happening is that, in the case of a failed hotunplug,
regardless of whether it was a QEMU error or a guest misbehavior, the pSeries
machine is retaining the unplug state of the device in the running guest.
This state is cleanup in machine reset, where it is assumed that this state
represents a device that is pending unplug, and the device is hotunpluged
from the board. Until the reset occurs, any hotunplug operation of the same
device is forbid because there is a pending unplug state.

This behavior has at least one undesirable side effect. A long standing pending
unplug state is, more often than not, the result of a hotunplug error. The user
had to dealt with it, since retrying to unplug the device is noy allowed, and 
then
in the machine reset we're removing the device from the guest. This means that
we're failing the user twice - failed to hotunplug when asked, then hotunplugged
without notice.

Solutions to this problem range between trying to predict when the hotunplug 
will
fail and forbid the operation from the QEMU layer, from opening up the IRQ queue
to allow for multiple hotunplug attempts, from telling the users to 'reboot the
machine if something goes wrong'. The first solution is flawed because we can't
fully predict guest behavior from QEMU, the second solution is a trial and error
remediation that counts on a hope that the unplug will eventually succeed, and 
the
third is ... well.

This patch introduces a crude, but effective solution to hotunplug errors in
the pSeries machine. For each unplug done, we'll timeout after some time. If
a certain amount of time passes, we'll cleanup the hotunplug state from the 
machine.
During the timeout period, any unplug operations in the same device will still
be blocked. After that, we'll assume that the guest failed the operation, and
allow the user to try again. If the timeout is too short we'll prevent 
legitimate
hotunplug situations to occur, so we'll need to overestimate the regular time
an unplug operation takes to succeed to account that.

The true solution for the hotunplug errors in the pSeries machines is a PAPR 
change
to allow for the guest to warn the platform about it. For now, the work done in 
this
timeout design can be used for the new PAPR 'abort hcall' in the future, given 
that
for both cases we'll need code to cleanup the existing unplug states of the 
DRCs.

At this moment we're adding the basic wiring of the timer into the DRC. Next 
patch
will use the timer to timeout failed CPU hotunplugs.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
 hw/ppc/spapr_drc.c         | 36 ++++++++++++++++++++++++++++++++++++
 include/hw/ppc/spapr_drc.h |  2 ++
 2 files changed, 38 insertions(+)

diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c
index 67041fb212..c88bb524c5 100644
--- a/hw/ppc/spapr_drc.c
+++ b/hw/ppc/spapr_drc.c
@@ -57,6 +57,8 @@ static void spapr_drc_release(SpaprDrc *drc)
     drck->release(drc->dev);
 
     drc->unplug_requested = false;
+    timer_del(drc->unplug_timeout_timer);
+
     g_free(drc->fdt);
     drc->fdt = NULL;
     drc->fdt_start_offset = 0;
@@ -453,6 +455,24 @@ static const VMStateDescription 
vmstate_spapr_drc_unplug_requested = {
     }
 };
 
+static bool spapr_drc_unplug_timeout_timer_needed(void *opaque)
+{
+    SpaprDrc *drc = opaque;
+
+    return timer_pending(drc->unplug_timeout_timer);
+}
+
+static const VMStateDescription vmstate_spapr_drc_unplug_timeout_timer = {
+    .name = "DRC unplug timeout timer",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = spapr_drc_unplug_timeout_timer_needed,
+    .fields = (VMStateField[]) {
+        VMSTATE_TIMER_PTR(unplug_timeout_timer, SpaprDrc),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
 static bool spapr_drc_needed(void *opaque)
 {
     SpaprDrc *drc = opaque;
@@ -486,10 +506,20 @@ static const VMStateDescription vmstate_spapr_drc = {
     },
     .subsections = (const VMStateDescription * []) {
         &vmstate_spapr_drc_unplug_requested,
+        &vmstate_spapr_drc_unplug_timeout_timer,
         NULL
     }
 };
 
+static void drc_unplug_timeout_cb(void *opaque)
+{
+    SpaprDrc *drc = opaque;
+
+    if (drc->unplug_requested) {
+        drc->unplug_requested = false;
+    }
+}
+
 static void drc_realize(DeviceState *d, Error **errp)
 {
     SpaprDrc *drc = SPAPR_DR_CONNECTOR(d);
@@ -512,6 +542,11 @@ static void drc_realize(DeviceState *d, Error **errp)
     object_property_add_alias(root_container, link_name,
                               drc->owner, child_name);
     g_free(link_name);
+
+    drc->unplug_timeout_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
+                                             drc_unplug_timeout_cb,
+                                             drc);
+
     vmstate_register(VMSTATE_IF(drc), spapr_drc_index(drc), &vmstate_spapr_drc,
                      drc);
     trace_spapr_drc_realize_complete(spapr_drc_index(drc));
@@ -529,6 +564,7 @@ static void drc_unrealize(DeviceState *d)
     name = g_strdup_printf("%x", spapr_drc_index(drc));
     object_property_del(root_container, name);
     g_free(name);
+    timer_free(drc->unplug_timeout_timer);
 }
 
 SpaprDrc *spapr_dr_connector_new(Object *owner, const char *type,
diff --git a/include/hw/ppc/spapr_drc.h b/include/hw/ppc/spapr_drc.h
index 02a63b3666..b2e6222d09 100644
--- a/include/hw/ppc/spapr_drc.h
+++ b/include/hw/ppc/spapr_drc.h
@@ -187,6 +187,8 @@ typedef struct SpaprDrc {
     bool unplug_requested;
     void *fdt;
     int fdt_start_offset;
+
+    QEMUTimer *unplug_timeout_timer;
 } SpaprDrc;
 
 struct SpaprMachineState;
-- 
2.29.2