Re: [PATCH 00/14] hw: Fix various --without-default-devices issues

[Paolo Bonzini]

On 31/12/19 19:32, Philippe Mathieu-Daudé wrote:
> Various fixes when configured with --without-default-devices
> and building each machine individually.
> Adding the corresponding CI tests is out of the scope of this
> series.
> 
> This series is pushed on top of "hw/i386: Allow building
> machines without IOMMU" [*] here:
> https://gitlab.com/philmd/qemu/commits/kconfig_misc_fixes
> 
> Happy new year!
> 
> [*] https://lists.gnu.org/archive/html/qemu-devel/2019-12/msg05230.html

Queued these:

 hw/intc/i8259: Fix Kconfig dependency on ISA bus
 hw/i386/Kconfig: Let the MicroVM machine select the SERIAL_ISA config
 hw/ppc/Kconfig: Restrict the MPC I2C controller to e500-based platforms
 hw/ppc/Kconfig: Let the Sam460ex board use the PowerPC 405 devices
 hw/ppc/Kconfig: Let the Xilinx Virtex5 ML507 use the PPC-440 devices
 hw/ppc/Makefile: Simplify the sPAPR PCI objects rule
 hw/ppc/Kconfig: Only select fw_cfg with machines using OpenBIOS
 hw/ppc/Kconfig: Only select FDT helper for machines using it
 hw/nvram/Kconfig: Add an entry for the NMC93xx EEPROM
 hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF

Thanks David for the acks.

Paolo

> Philippe Mathieu-Daudé (14):
>   hw/usb/redirect: Do not link 'usb-redir' device when USB not enabled
>   hw/intc/i8259: Fix Kconfig dependency on ISA bus
>   hw/i386/Kconfig: Let the MicroVM machine select the SERIAL_ISA config
>   hw/i386: Restrict fw_cfg to the PC machines
>   hw/i2c/Kconfig: Add an entry for the SMBus
>   hw/ppc/Kconfig: Restrict the MPC I2C controller to e500-based
>     platforms
>   hw/ppc/Kconfig: Let the Sam460ex board use the PowerPC 405 devices
>   hw/ppc/Kconfig: Let the Xilinx Virtex5 ML507 use the PPC-440 devices
>   hw/ppc/Makefile: Simplify the sPAPR PCI objects rule
>   hw/ppc/Kconfig: Only select fw_cfg with machines using OpenBIOS
>   hw/ppc/Kconfig: Only select FDT helper for machines using it
>   hw/nvram/Kconfig: Add an entry for the NMC93xx EEPROM
>   hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or
>     SLOF
>   hw/intc/Kconfig: Let APIC select IOAPIC
> 
>  default-configs/mips-softmmu-common.mak |  1 +
>  default-configs/ppc-softmmu.mak         |  1 -
>  hw/i2c/Kconfig                          |  8 ++++++--
>  hw/i2c/Makefile.objs                    |  3 ++-
>  hw/i386/Kconfig                         |  2 +-
>  hw/i386/Makefile.objs                   |  2 +-
>  hw/intc/Kconfig                         |  2 ++
>  hw/net/Kconfig                          |  2 ++
>  hw/nvram/Kconfig                        |  8 ++++++++
>  hw/nvram/Makefile.objs                  |  4 ++--
>  hw/ppc/Kconfig                          | 20 ++++++++++++++++++++
>  hw/ppc/Makefile.objs                    |  9 ++++-----
>  hw/scsi/Kconfig                         |  1 +
>  hw/sparc/Kconfig                        |  1 +
>  hw/sparc64/Kconfig                      |  1 +
>  hw/usb/Makefile.objs                    |  2 ++
>  16 files changed, 54 insertions(+), 13 deletions(-)
>