[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PULL v2 4/6] spapr: Add /chosen to FDT only at reset time to preser
From: |
Alexey Kardashevskiy |
Subject: |
Re: [PULL v2 4/6] spapr: Add /chosen to FDT only at reset time to preserve kernel and initramdisk |
Date: |
Wed, 4 Dec 2019 15:40:23 +1100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.2.2 |
On 04/12/2019 15:23, Alexey Kardashevskiy wrote:
>
>
> On 04/12/2019 03:09, Laurent Vivier wrote:
>>
>> Bad reply, the problem is with
>>
>> "spapr: Render full FDT on ibm,client-architecture-support"
>
>
> https://git.qemu.org/?p=SLOF.git;a=blob;f=board-qemu/slof/fdt.fs;h=3e4c1b34b8af2dcebde57e548c94417e5e20e1cc;hb=HEAD#l265
>
> A "bit ugly" became really ugly as before we were only patching
> interrupt-map for PHB (7 cells per line) only but now we have to patch
> (or, rather, skip) the PCI bridge interrupt-map (9 cells per line).
>
> Fixing now...
Basically, this:
diff --git a/board-qemu/slof/fdt.fs b/board-qemu/slof/fdt.fs
index 3e4c1b34b8af..463a2a8c0c2d 100644
--- a/board-qemu/slof/fdt.fs
+++ b/board-qemu/slof/fdt.fs
@@ -300,8 +300,13 @@ fdt-claim-reserve
\ ." Replacing in " dup node>path type cr
>r
s" interrupt-map" r@ get-property 0= IF
- ( old new prop-addr prop-len R: node )
- fdt-replace-interrupt-map
+ dup e00 = IF
+ ( old new prop-addr prop-len R: node )
+ fdt-replace-interrupt-map
+ ELSE
+ 2drop
+ ." no idea what this is" cr
+ THEN
THEN
>
>
>>
>> Sorry,
>> Laurent
>>
>> On 03/12/2019 16:57, Laurent Vivier wrote:
>>> On 18/11/2019 11:53, Laurent Vivier wrote:
>>>> From: Alexey Kardashevskiy <address@hidden>
>>>>
>>>> Since "spapr: Render full FDT on ibm,client-architecture-support" we build
>>>> the entire flatten device tree (FDT) twice - at the reset time and
>>>> when "ibm,client-architecture-support" (CAS) is called. The full FDT from
>>>> CAS is then applied on top of the SLOF internal device tree.
>>>>
>>>> This is mostly ok, however there is a case when the QEMU is started with
>>>> -initrd and for some reason the guest decided to move/unpack the init RAM
>>>> disk image - the guest correctly notifies SLOF about the change but
>>>> at CAS it is overridden with the QEMU initial location addresses and
>>>> the guest may fail to boot if the original initrd memory was changed.
>>>>
>>>> This fixes the problem by only adding the /chosen node at the reset time
>>>> to prevent the original QEMU's linux,initrd-start/linux,initrd-end to
>>>> override the updated addresses.
>>>>
>>>> This only treats /chosen differently as we know there is a special case
>>>> already and it is unlikely anything else will need to change /chosen at CAS
>>>> we are better off not touching /chosen after we handed it over to SLOF.
>>>>
>>>> Signed-off-by: Alexey Kardashevskiy <address@hidden>
>>>> Message-Id: <address@hidden>
>>>> Signed-off-by: David Gibson <address@hidden>
>>>> Signed-off-by: Laurent Vivier <address@hidden>
>>>> ---
>>>> hw/ppc/spapr.c | 25 +++++++++++++++----------
>>>> 1 file changed, 15 insertions(+), 10 deletions(-)
>>>>
>>>
>>> This patch breaks pseries boot when we use a pci-bridge (since v4.2.0-rc0):
>>>
>>> ...
>>> -device pci-bridge,id=pci_bridge1,bus=pci.0,addr=0x3,chassis_nr=1 \
>>> -device virtio-scsi-pci,bus=pci_bridge1 \
>>> ...
>>>
>>> OF stdout device is: /vdevice/vty@71000000
>>> Preparing to boot Linux version 5.4.0-rc3+ (lvivier@localhost) (gcc
>>> version 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC)) #2 SMP Wed Nov 13
>>> 09:08:20 EST 2019
>>> Detected machine type: 0000000000000101
>>> command line: BOOT_IMAGE=/vmlinuz-5.4.0-rc3+ root=/dev/mapper/rhel-root
>>> ro crashkernel=auto rd.lvm.lv=rhel/root rd.lvm.lv=rhel/swap
>>> Max number of cores passed to firmware: 2048 (NR_CPUS = 2048)
>>> Calling ibm,client-architecture-support...
>>>
>>> ( 300 ) Data Storage Exception [ 1dc5f230 ]
>>>
>>>
>>> R0 .. R7 R8 .. R15 R16 .. R23 R24 .. R31
>>> 8000000000001000 000000001e477010 0000000000000000 000000001dc17500
>>> 000000001e67afe0 0000000020000004 0000000000000000 000000001dc1bf88
>>> 000000001dc21800 000000001dc5f248 000000001e477010 0000000000000003
>>> 000000001dc61000 000000001e78dc2d 000000001dc1c158 000000000000f001
>>> 0000000000000000 a000000000000001 0000000000008000 000000001e67b060
>>> 000000001dc5f230 0000000000000000 000000000000f003 ffffffffffffffff
>>> 000000001e745860 0000000000000000 0000000000000006 000000001dbf48f8
>>> 000000001dc5f248 0000000000000000 000000001e67b050 000000001dc1c350
>>>
>>> CR / XER LR / CTR SRR0 / SRR1 DAR / DSISR
>>> 80000808 000000001dbf34d4 000000001dbf4194 0000000020000004
>>> 0000000020000000 000000001dbf48f8 8000000000001000 40000000
>>>
>>>
>>> 4a >
>>>
>>> Thanks,
>>> Laurent
>>>
>>
>
--
Alexey