[PATCH v2 08/33] spapr: Replace spapr_vio_qirq() helper with spapr_vio_irq_pulse() helper

[David Gibson]

Every caller of spapr_vio_qirq() immediately calls qemu_irq_pulse() with
the result, so we might as well just fold that into the helper.

Signed-off-by: David Gibson <address@hidden>
Reviewed-by: Cédric Le Goater <address@hidden>
Reviewed-by: Greg Kurz <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
---
 hw/char/spapr_vty.c        | 3 +--
 hw/net/spapr_llan.c        | 3 +--
 hw/ppc/spapr_vio.c         | 3 +--
 include/hw/ppc/spapr_vio.h | 5 +++--
 4 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/hw/char/spapr_vty.c b/hw/char/spapr_vty.c
index 087c93e4fa..8f4d9fe472 100644
--- a/hw/char/spapr_vty.c
+++ b/hw/char/spapr_vty.c
@@ -5,7 +5,6 @@
 #include "cpu.h"
 #include "migration/vmstate.h"
 #include "chardev/char-fe.h"
-#include "hw/irq.h"
 #include "hw/ppc/spapr.h"
 #include "hw/ppc/spapr_vio.h"
 #include "hw/qdev-properties.h"
@@ -37,7 +36,7 @@ static void vty_receive(void *opaque, const uint8_t *buf, int 
size)
 
     if ((dev->in == dev->out) && size) {
         /* toggle line to simulate edge interrupt */
-        qemu_irq_pulse(spapr_vio_qirq(&dev->sdev));
+        spapr_vio_irq_pulse(&dev->sdev);
     }
     for (i = 0; i < size; i++) {
         if (dev->in - dev->out >= VTERM_BUFSIZE) {
diff --git a/hw/net/spapr_llan.c b/hw/net/spapr_llan.c
index 701e6e1514..3d96884d66 100644
--- a/hw/net/spapr_llan.c
+++ b/hw/net/spapr_llan.c
@@ -27,7 +27,6 @@
 
 #include "qemu/osdep.h"
 #include "cpu.h"
-#include "hw/irq.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "net/net.h"
@@ -267,7 +266,7 @@ static ssize_t spapr_vlan_receive(NetClientState *nc, const 
uint8_t *buf,
     }
 
     if (sdev->signal_state & 1) {
-        qemu_irq_pulse(spapr_vio_qirq(sdev));
+        spapr_vio_irq_pulse(sdev);
     }
 
     return size;
diff --git a/hw/ppc/spapr_vio.c b/hw/ppc/spapr_vio.c
index 0803649658..554de9930d 100644
--- a/hw/ppc/spapr_vio.c
+++ b/hw/ppc/spapr_vio.c
@@ -23,7 +23,6 @@
 #include "qemu/error-report.h"
 #include "qapi/error.h"
 #include "qapi/visitor.h"
-#include "hw/irq.h"
 #include "qemu/log.h"
 #include "hw/loader.h"
 #include "elf.h"
@@ -294,7 +293,7 @@ int spapr_vio_send_crq(SpaprVioDevice *dev, uint8_t *crq)
     dev->crq.qnext = (dev->crq.qnext + 16) % dev->crq.qsize;
 
     if (dev->signal_state & 1) {
-        qemu_irq_pulse(spapr_vio_qirq(dev));
+        spapr_vio_irq_pulse(dev);
     }
 
     return 0;
diff --git a/include/hw/ppc/spapr_vio.h b/include/hw/ppc/spapr_vio.h
index 875be28cdd..72762ed16b 100644
--- a/include/hw/ppc/spapr_vio.h
+++ b/include/hw/ppc/spapr_vio.h
@@ -24,6 +24,7 @@
 
 #include "hw/ppc/spapr.h"
 #include "sysemu/dma.h"
+#include "hw/irq.h"
 
 #define TYPE_VIO_SPAPR_DEVICE "vio-spapr-device"
 #define VIO_SPAPR_DEVICE(obj) \
@@ -84,11 +85,11 @@ extern SpaprVioDevice *spapr_vio_find_by_reg(SpaprVioBus 
*bus, uint32_t reg);
 void spapr_dt_vdevice(SpaprVioBus *bus, void *fdt);
 extern gchar *spapr_vio_stdout_path(SpaprVioBus *bus);
 
-static inline qemu_irq spapr_vio_qirq(SpaprVioDevice *dev)
+static inline void spapr_vio_irq_pulse(SpaprVioDevice *dev)
 {
     SpaprMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
 
-    return spapr_qirq(spapr, dev->irq);
+    qemu_irq_pulse(spapr_qirq(spapr, dev->irq));
 }
 
 static inline bool spapr_vio_dma_valid(SpaprVioDevice *dev, uint64_t taddr,
-- 
2.21.0