Re: [Qemu-ppc] [PATCH v12 2/6] ppc: spapr: Introduce FWNMI capability

[Greg Kurz]

On Tue, 3 Sep 2019 12:52:39 +0530
Aravinda Prasad <address@hidden> wrote:

> 
> 
> On Friday 30 August 2019 07:28 PM, Greg Kurz wrote:
> > On Fri, 30 Aug 2019 14:43:40 +0530
> > Aravinda Prasad <address@hidden> wrote:
> > 
> >> Introduce the KVM capability KVM_CAP_PPC_FWNMI so that
> >> the KVM causes guest exit with NMI as exit reason
> >> when it encounters a machine check exception on the
> >> address belonging to a guest. Without this capability
> >> enabled, KVM redirects machine check exceptions to
> >> guest's 0x200 vector.
> >>
> >> This patch also introduces fwnmi-mce capability to
> >> deal with the case when a guest with the
> >> KVM_CAP_PPC_FWNMI capability enabled is attempted
> >> to migrate to a host that does not support this
> >> capability.
> >>
> >> Signed-off-by: Aravinda Prasad <address@hidden>
> >> ---
> >>  hw/ppc/spapr.c         |    1 +
> >>  hw/ppc/spapr_caps.c    |   29 +++++++++++++++++++++++++++++
> >>  include/hw/ppc/spapr.h |    4 +++-
> >>  target/ppc/kvm.c       |   22 ++++++++++++++++++++++
> >>  target/ppc/kvm_ppc.h   |   11 +++++++++++
> >>  5 files changed, 66 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> >> index ea56499..8288e8b 100644
> >> --- a/hw/ppc/spapr.c
> >> +++ b/hw/ppc/spapr.c
> >> @@ -4487,6 +4487,7 @@ static void spapr_machine_class_init(ObjectClass 
> >> *oc, void *data)
> >>      smc->default_caps.caps[SPAPR_CAP_NESTED_KVM_HV] = SPAPR_CAP_OFF;
> >>      smc->default_caps.caps[SPAPR_CAP_LARGE_DECREMENTER] = SPAPR_CAP_ON;
> >>      smc->default_caps.caps[SPAPR_CAP_CCF_ASSIST] = SPAPR_CAP_OFF;
> >> +    smc->default_caps.caps[SPAPR_CAP_FWNMI_MCE] = SPAPR_CAP_OFF;
> >>      spapr_caps_add_properties(smc, &error_abort);
> >>      smc->irq = &spapr_irq_dual;
> >>      smc->dr_phb_enabled = true;
> >> diff --git a/hw/ppc/spapr_caps.c b/hw/ppc/spapr_caps.c
> >> index 481dfd2..c11ff87 100644
> >> --- a/hw/ppc/spapr_caps.c
> >> +++ b/hw/ppc/spapr_caps.c
> >> @@ -496,6 +496,25 @@ static void cap_ccf_assist_apply(SpaprMachineState 
> >> *spapr, uint8_t val,
> >>      }
> >>  }
> >>  
> >> +static void cap_fwnmi_mce_apply(SpaprMachineState *spapr, uint8_t val,
> >> +                                Error **errp)
> >> +{
> >> +    if (!val) {
> >> +        return; /* Disabled by default */
> >> +    }
> >> +
> >> +    if (tcg_enabled()) {
> >> +        /*
> >> +         * TCG support may not be correct in some conditions (e.g., in 
> >> case
> >> +         * of software injected faults like duplicate SLBs).
> >> +         */
> >> +        warn_report("Firmware Assisted Non-Maskable Interrupts not 
> >> supported in TCG");
> >> +    } else if (kvm_enabled() && !kvmppc_has_cap_ppc_fwnmi()) {
> >> +        error_setg(errp,
> >> +"Firmware Assisted Non-Maskable Interrupts not supported by KVM, try 
> >> cap-fwnmi-mce=off");
> >> +    }
> >> +}
> >> +
> >>  SpaprCapabilityInfo capability_table[SPAPR_CAP_NUM] = {
> >>      [SPAPR_CAP_HTM] = {
> >>          .name = "htm",
> >> @@ -595,6 +614,15 @@ SpaprCapabilityInfo capability_table[SPAPR_CAP_NUM] = 
> >> {
> >>          .type = "bool",
> >>          .apply = cap_ccf_assist_apply,
> >>      },
> >> +    [SPAPR_CAP_FWNMI_MCE] = {
> >> +        .name = "fwnmi-mce",
> >> +        .description = "Handle fwnmi machine check exceptions",
> >> +        .index = SPAPR_CAP_FWNMI_MCE,
> >> +        .get = spapr_cap_get_bool,
> >> +        .set = spapr_cap_set_bool,
> >> +        .type = "bool",
> >> +        .apply = cap_fwnmi_mce_apply,
> >> +    },
> >>  };
> >>  
> >>  static SpaprCapabilities default_caps_with_cpu(SpaprMachineState *spapr,
> >> @@ -734,6 +762,7 @@ SPAPR_CAP_MIG_STATE(hpt_maxpagesize, 
> >> SPAPR_CAP_HPT_MAXPAGESIZE);
> >>  SPAPR_CAP_MIG_STATE(nested_kvm_hv, SPAPR_CAP_NESTED_KVM_HV);
> >>  SPAPR_CAP_MIG_STATE(large_decr, SPAPR_CAP_LARGE_DECREMENTER);
> >>  SPAPR_CAP_MIG_STATE(ccf_assist, SPAPR_CAP_CCF_ASSIST);
> >> +SPAPR_CAP_MIG_STATE(fwnmi, SPAPR_CAP_FWNMI_MCE);
> >>  
> >>  void spapr_caps_init(SpaprMachineState *spapr)
> >>  {
> >> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> >> index 03111fd..66049ac 100644
> >> --- a/include/hw/ppc/spapr.h
> >> +++ b/include/hw/ppc/spapr.h
> >> @@ -79,8 +79,10 @@ typedef enum {
> >>  #define SPAPR_CAP_LARGE_DECREMENTER     0x08
> >>  /* Count Cache Flush Assist HW Instruction */
> >>  #define SPAPR_CAP_CCF_ASSIST            0x09
> >> +/* FWNMI machine check handling */
> >> +#define SPAPR_CAP_FWNMI_MCE             0x0A
> >>  /* Num Caps */
> >> -#define SPAPR_CAP_NUM                   (SPAPR_CAP_CCF_ASSIST + 1)
> >> +#define SPAPR_CAP_NUM                   (SPAPR_CAP_FWNMI_MCE + 1)
> >>  
> >>  /*
> >>   * Capability Values
> >> diff --git a/target/ppc/kvm.c b/target/ppc/kvm.c
> >> index 8c5b1f2..c055fc1 100644
> >> --- a/target/ppc/kvm.c
> >> +++ b/target/ppc/kvm.c
> >> @@ -85,6 +85,7 @@ static int cap_ppc_safe_indirect_branch;
> >>  static int cap_ppc_count_cache_flush_assist;
> >>  static int cap_ppc_nested_kvm_hv;
> >>  static int cap_large_decr;
> >> +static int cap_ppc_fwnmi;
> >>  
> >>  static uint32_t debug_inst_opcode;
> >>  
> >> @@ -2055,6 +2056,22 @@ void kvmppc_set_mpic_proxy(PowerPCCPU *cpu, int 
> >> mpic_proxy)
> >>      }
> >>  }
> >>  
> >> +int kvmppc_set_fwnmi(void)
> >> +{
> >> +    PowerPCCPU *cpu = POWERPC_CPU(first_cpu);
> >> +    CPUState *cs = CPU(cpu);
> >> +    int ret;
> >> +
> >> +    ret = kvm_vcpu_enable_cap(cs, KVM_CAP_PPC_FWNMI, 0);
> >> +    if (ret) {
> >> +        error_report("This KVM version does not support FWNMI");
> >> +        return ret;
> >> +    }
> >> +
> >> +    cap_ppc_fwnmi = 1;
> > 
> > Hmm... AFAICT the meaning of cap_ppc_fwnmi should just be "KVM knows about
> > FWNMI", not "FWNMI was successfully enabled in KVM". Your v10 used to set
> > cap_ppc_fwnmi in kvm_arch_init() just like the other guys... why this 
> > change ?
> 
> Even I thought that cap_* is for that, but cap_papr uses it the other
> way. So I decided to use a similar convention for cap_ppc_fwnmi.
> 
> In v10, cap_ppc_fwnmi is set in kvm_arch_init() if FWNMI is available in
> KVM and we try to enable FWNMI later in the boot phase when
> rtas_ibm_nmi_register() is called. It's possible that
> SPAPR_CAP_FWNMI_MCE is set and we may fail to enable FWNMI due to errors
> in KVM or QEMU.
> 
> To avoid this, in v12, FWNMI is enabled if SPAPR_CAP_FWNMI_MCE is set
> irrespective of rtas_ibm_nmi_register() is called or not. This way we
> fail early if we are not able to enable FWNMI.
> 

Ok. Then maybe you should add a comment in kvm_arch_init(), similar to the
cap_papr one ?

> So, when SPAPR_CAP_FWNMI_MCE is set with FWNMI enabled in KVM, a machine
> check error will always cause a guest exit. If the guest has registered
> a handler by calling rtas_ibm_nmi_register(), then we will invoke the
> guest registered handler else we will jump to 0x200 interrupt vector in
> the guest.
> 

Yeah, this seems to be handled in patch 4... which I haven't read in detail
yet.

+    if (spapr->guest_machine_check_addr == -1) {
+        /*
+         * This implies that we have hit a machine check between system
+         * reset and "ibm,nmi-register". Fall back to the old machine
+         * check behavior in such cases.
+         */
+        cs->exception_index = POWERPC_EXCP_MCHECK;
+        ppc_cpu_do_interrupt(cs);
+        return;
+    }

Thanks for the clarification.

> With this change we don't need "KVM knows about FWNMI" information. So I
> removed that part and used cap_ppc_fwnmi to track if FWNMI is enabled or
> disabled in KVM. This also simplifies spapr_fwnmi_post_load() to avoid
> enabling FWNMI multiple times (see patch 6).
> 
> > 
> >> +    return ret;
> >> +}
> >> +
> >>  int kvmppc_smt_threads(void)
> >>  {
> >>      return cap_ppc_smt ? cap_ppc_smt : 1;
> >> @@ -2355,6 +2372,11 @@ bool kvmppc_has_cap_mmu_hash_v3(void)
> >>      return cap_mmu_hash_v3;
> >>  }
> >>  
> >> +bool kvmppc_has_cap_ppc_fwnmi(void)
> >> +{
> >> +    return cap_ppc_fwnmi;
> >> +}
> >> +
> >>  static bool kvmppc_power8_host(void)
> >>  {
> >>      bool ret = false;
> >> diff --git a/target/ppc/kvm_ppc.h b/target/ppc/kvm_ppc.h
> >> index 98bd7d5..2990898 100644
> >> --- a/target/ppc/kvm_ppc.h
> >> +++ b/target/ppc/kvm_ppc.h
> >> @@ -27,6 +27,8 @@ void kvmppc_enable_h_page_init(void);
> >>  void kvmppc_set_papr(PowerPCCPU *cpu);
> >>  int kvmppc_set_compat(PowerPCCPU *cpu, uint32_t compat_pvr);
> >>  void kvmppc_set_mpic_proxy(PowerPCCPU *cpu, int mpic_proxy);
> >> +int kvmppc_set_fwnmi(void);
> >> +bool kvmppc_has_cap_ppc_fwnmi(void);
> >>  int kvmppc_smt_threads(void);
> >>  void kvmppc_hint_smt_possible(Error **errp);
> >>  int kvmppc_set_smt_threads(int smt);
> >> @@ -159,6 +161,15 @@ static inline void kvmppc_set_mpic_proxy(PowerPCCPU 
> >> *cpu, int mpic_proxy)
> >>  {
> >>  }
> >>  
> >> +static inline int kvmppc_set_fwnmi(void)
> >> +{
> > 
> > Missing return -1;
> 
> Hmm.. missed it.
> 
> Regards,
> Aravinda
> 
> > 
> >> +}
> >> +
> >> +static inline bool kvmppc_has_cap_ppc_fwnmi(void)
> >> +{
> >> +    return false;
> >> +}
> >> +
> >>  static inline int kvmppc_smt_threads(void)
> >>  {
> >>      return 1;
> >>
> > 
>