Re: [Qemu-ppc] [PATCH 00/10] spapr: introduce the 'dual' interrupt mode XICS/XIVE

[Cédric Le Goater]

On 1/7/19 5:48 AM, David Gibson wrote:
> On Wed, Jan 02, 2019 at 06:57:33AM +0100, Cédric Le Goater wrote:
>> Hello,
>>
>> This series adds a new sPAPR IRQ backend called 'dual' which supports
>> both interrupt mode, the XIVE native exploitation mode and the legacy
>> compatibility mode (XICS).
>>
>> The machine operates with the legacy mode by default and lets CAS
>> negotiate a new interrupt mode. If a new mode is selected, it is
>> activated after a machine reset to take into account the required
>> changes. These impact the device tree layout, the interrupt presenter
>> object and the exposed MMIO regions in the case of XIVE.
>>
>> The preliminary changes for this new IRQ backend are the introduction
>> of a second interrupt presenter object under the PowerPCCPU to support
>> XIVE. The qemu_irq array of each interrupt controller model is also
>> made common and moved under the machine.
> 
> Ok, I've now applied all of this series to ppc-for-4.0.

Thanks,

We should pursue with KVM XIVE support now. Shall I send the Linux KVM  
and the QEMU KVM patchsets in parallel ?

I still have some work to be done on the QEMU PowerNV before resending.

Thanks,

C.      

> 
>>
>>
>> GitHub trees available here :
>>  
>> QEMU sPAPR:
>>
>>   https://github.com/legoater/qemu/commits/xive-next
>>   
>> QEMU PowerNV:
>>
>>   https://github.com/legoater/qemu/commits/powernv-3.1
>>
>> Linux/KVM:
>>
>>   https://github.com/legoater/linux/commits/xive-4.20
>>
>> OPAL:
>>
>>   https://github.com/legoater/skiboot/commits/xive
>>
>> Best wishes for 2019 ! 
>>
>> C.
>>
>>
>>
>> Cédric Le Goater (10):
>>   spapr: modify the prototype of the cpu_intc_create() method
>>   ppc/xive: introduce a XiveTCTX pointer under PowerPCCPU
>>   ppc: replace the 'Object *intc' by a 'ICPState *icp' pointer under the
>>     CPU
>>   spapr/xive: simplify the sPAPR IRQ qirq method for XIVE
>>   ppc: export the XICS and XIVE set_irq handlers
>>   pnv/psi: move the ICSState qemu_irq array under the PSI device model
>>   spapr: move the ICSState qemu_irq array under the machine
>>   ppc/xics: allow ICSState to have an offset 0
>>   spapr: introduce a new sPAPR IRQ backend supporting XIVE and XICS
>>   spapr: enable XIVE MMIOs at reset
>>
>>  include/hw/ppc/pnv.h        |   2 +-
>>  include/hw/ppc/pnv_psi.h    |   1 +
>>  include/hw/ppc/spapr.h      |   1 +
>>  include/hw/ppc/spapr_irq.h  |   6 +-
>>  include/hw/ppc/spapr_xive.h |   2 +-
>>  include/hw/ppc/xics.h       |   6 +-
>>  include/hw/ppc/xive.h       |   9 +-
>>  target/ppc/cpu.h            |   5 +-
>>  hw/intc/spapr_xive.c        |  23 ++-
>>  hw/intc/xics.c              |   4 +-
>>  hw/intc/xics_kvm.c          |   3 +-
>>  hw/intc/xics_spapr.c        |  10 +-
>>  hw/intc/xive.c              |  11 +-
>>  hw/ppc/pnv.c                |  27 ++--
>>  hw/ppc/pnv_core.c           |   4 +-
>>  hw/ppc/pnv_psi.c            |   7 +-
>>  hw/ppc/spapr.c              |  12 +-
>>  hw/ppc/spapr_cpu_core.c     |   9 +-
>>  hw/ppc/spapr_hcall.c        |  11 ++
>>  hw/ppc/spapr_irq.c          | 270 ++++++++++++++++++++++++++++++++++--
>>  20 files changed, 342 insertions(+), 81 deletions(-)
>>
>