Re: [Qemu-ppc] [PATCH v2 1/2] ppc/pnv: Add model for Power8 PHB3 PCIe Host bridge

[Cédric Le Goater]

On 07/27/2018 12:36 AM, Benjamin Herrenschmidt wrote:
> On Thu, 2018-07-26 at 11:03 +0200, Cédric Le Goater wrote:
>> Ben,
>>
>> I have found out recently that the QEMU PowerNV could hang while accessing
>> the disk. 
>>
>> The issue seems to be the phb3_msi_try_send() routine when called from 
>> the resend() handler. The 'P' is ignored in that case but not the 'Q' 
>> bit which means that no interrupt will be resent if P|Q are set. 
> 
> I'd have to remember how PQ works on P8 ... my gut feeling is that we
> should resend if P=1 but I'm no 100% certain.

This is not exactly what the code does. To force a resend, it ignores 
P but if Q=1, it bails out without doing anything, like a normal trigger 
would do. So I think that in the resend case we should ignore Q as well.

Thanks,

C.


> 
>> See the log extract below  :
>>
>>   PHB3(phb3_msi_try_send): MSI 0: try_send, ive=0x2005000000fd eff pq=0 
>> prio=5 server=8 ignore_p=0
>>   PHB3(phb3_msi_set_p): MSI 0: setting P
>>   PHB3(phb3_msi_set_p):  IVE readback: 0x2005010000fd
>>   PHB3(phb3_msi_reject): MSI 0 rejected
>>   PHB3(phb3_msi_resend): MSI resend...
>>   PHB3(phb3_msi_try_send): MSI 0: try_send, ive=0x2005010000fd eff pq=0 
>> prio=5 server=8 ignore_p=1
>>   PHB3(phb3_msi_set_p): MSI 0: setting P
>>   PHB3(phb3_msi_set_p):  IVE readback: 0x2005010000fd
>>   PHB3(phb3_msi_reject): MSI 0 rejected
>>   PHB3(phb3_msi_try_send): MSI 0: try_send, ive=0x2005010000fd eff pq=2 
>> prio=5 server=8 ignore_p=0
>>   PHB3(phb3_msi_set_q): MSI 0: setting Q
>>   PHB3(phb3_msi_set_q):  IVE readback: 0x2005010100fd
>>   PHB3(phb3_msi_resend): MSI resend...
>>   PHB3(phb3_msi_try_send): MSI 0: try_send, ive=0x2005010100fd eff pq=1 
>> prio=5 server=8 ignore_p=1
>>   PHB3(phb3_msi_try_send): MSI 0: try_send, ive=0x2005010100fd eff pq=3 
>> prio=5 server=8 ignore_p=0
>>   PHB3(phb3_msi_try_send): MSI 0: try_send, ive=0x2005010100fd eff pq=3 
>> prio=5 server=8 ignore_p=0
>>   PHB3(phb3_msi_try_send): MSI 0: try_send, ive=0x2005010100fd eff pq=3 
>> prio=5 server=8 ignore_p=0
>>   PHB3(phb3_msi_try_send): MSI 0: try_send, ive=0x2005010100fd eff pq=3 
>> prio=5 server=8 ignore_p=0
>>   ... goes on and on ...
>>   hangs
>>
>> I have added the relevant code at the bottom of the email. 
>>
>>
>> If the 'Q' bit is ignored also, the results are good with a SATA drive 
>> or a SCSI drive using the megasas model. Do you think this is correct ?
>> I would say so but I am still discovering that part.
>>
>> I have no idea why it didn't show up before. May be because we mostly 
>> used virtio-blk.
>>
>> Thanks,
>>
>> C. 
>>
>>> +static void phb3_msi_try_send(Phb3MsiState *msi, int srcno, bool ignore_p)
>>> +{
>>> +    ICSState *ics = ICS_BASE(msi);
>>> +    uint64_t ive;
>>> +    uint64_t server, prio, pq, gen;
>>> +
>>> +    if (!phb3_msi_read_ive(msi->phb, srcno, &ive)) {
>>> +        return;
>>> +    }
>>> +
>>> +    server = GETFIELD(IODA2_IVT_SERVER, ive);
>>> +    prio = GETFIELD(IODA2_IVT_PRIORITY, ive);
>>> +    pq = GETFIELD(IODA2_IVT_Q, ive);
>>> +    if (!ignore_p) {
>>> +        pq |= GETFIELD(IODA2_IVT_P, ive) << 1;
>>> +    }
>>> +    gen = GETFIELD(IODA2_IVT_GEN, ive);
>>> +
>>> +    /*
>>> +     * The low order 2 bits are the link pointer (Type II interrupts).
>>> +     * Shift back to get a valid IRQ server.
>>> +     */
>>> +    server >>= 2;
>>> +
>>> +    switch (pq) {
>>> +    case 0: /* 00 */
>>> +        if (prio == 0xff) {
>>> +            /* Masked, set Q */
>>> +            phb3_msi_set_q(msi, srcno);
>>> +        } else {
>>> +            /* Enabled, set P and send */
>>> +            phb3_msi_set_p(msi, srcno, gen);
>>> +            icp_irq(ics, server, srcno + ics->offset, prio);
>>> +        }
>>> +        break;
>>> +    case 2: /* 10 */
>>> +        /* Already pending, set Q */
>>> +        phb3_msi_set_q(msi, srcno);
>>> +        break;
>>> +    case 1: /* 01 */
>>> +    case 3: /* 11 */
>>> +    default:
>>> +        /* Just drop stuff if Q already set */
>>> +        break;
>>> +    }
>>> +}
>>> +
>>> +static void phb3_msi_set_irq(void *opaque, int srcno, int val)
>>> +{
>>> +    Phb3MsiState *msi = PHB3_MSI(opaque);
>>> +
>>> +    if (val) {
>>> +        phb3_msi_try_send(msi, srcno, false);
>>> +    }
>>> +}
>>
>> [ ... ]
>>  
>>> +static void phb3_msi_resend(ICSState *ics)
>>> +{
>>> +    Phb3MsiState *msi = PHB3_MSI(ics);
>>> +    unsigned int i, j;
>>> +
>>> +    if (msi->rba_sum == 0) {
>>> +        return;
>>> +    }
>>> +
>>> +    for (i = 0; i < 32; i++) {
>>> +        if ((msi->rba_sum & (1u << i)) == 0) {
>>> +            continue;
>>> +        }
>>> +        msi->rba_sum &= ~(1u << i);
>>> +        for (j = 0; j < 64; j++) {
>>> +            if ((msi->rba[i] & (1ull << j)) == 0) {
>>> +                continue;
>>> +            }
>>> +            msi->rba[i] &= ~(1u << j);
>>> +            phb3_msi_try_send(msi, i * 64 + j, true);
>>> +        }
>>> +    }
>>> +}
>>
>>
>