[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCH qemu v2] vfio/spapr: Allow backing bigger guest IO
From: |
Alexey Kardashevskiy |
Subject: |
Re: [Qemu-ppc] [PATCH qemu v2] vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages |
Date: |
Fri, 20 Jul 2018 16:09:58 +1000 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.0 |
On 20/6/18 7:10 pm, Alexey Kardashevskiy wrote:
> At the moment the PPC64/pseries guest only supports 4K/64K/16M IOMMU
> pages and POWER8 CPU supports the exact same set of page size so
> so far things worked fine.
>
> However POWER9 supports different set of sizes - 4K/64K/2M/1G and
> the last two - 2M and 1G - are not even allowed in the paravirt interface
> (RTAS DDW) so we always end up using 64K IOMMU pages, although we could
> back guest's 16MB IOMMU pages with 2MB pages on the host.
>
> This stores the supported host IOMMU page sizes in VFIOContainer and uses
> this later when creating a new DMA window. This uses the system page size
> (64k normally, 2M/16M/1G if hugepages used) as the upper limit of
> the IOMMU pagesize.
>
> This changes the type of @pagesize to uint64_t as this is what
> memory_region_iommu_get_min_page_size() returns and clz64() takes.
>
> There should be no behavioral changes on platforms other than pseries.
> The guest will keep using the IOMMU page size selected by the PHB pagesize
> property as this only changes the underlying hardware TCE table
> granularity.
>
> Signed-off-by: Alexey Kardashevskiy <address@hidden>
Ping?
> ---
> Changes:
> v2:
> * fixed biggest but smaller page size calculation
> * limit IOMMU pagesize to the system pagesize
> ---
> include/hw/vfio/vfio-common.h | 1 +
> hw/vfio/common.c | 3 +++
> hw/vfio/spapr.c | 21 ++++++++++++++++++++-
> 3 files changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> index a903692..c20524d 100644
> --- a/include/hw/vfio/vfio-common.h
> +++ b/include/hw/vfio/vfio-common.h
> @@ -73,6 +73,7 @@ typedef struct VFIOContainer {
> unsigned iommu_type;
> int error;
> bool initialized;
> + unsigned long pgsizes;
> /*
> * This assumes the host IOMMU can support only a single
> * contiguous IOVA window. We may need to generalize that in
> diff --git a/hw/vfio/common.c b/hw/vfio/common.c
> index fb396cf..40f0356 100644
> --- a/hw/vfio/common.c
> +++ b/hw/vfio/common.c
> @@ -1108,6 +1108,7 @@ static int vfio_connect_container(VFIOGroup *group,
> AddressSpace *as,
> info.iova_pgsizes = 4096;
> }
> vfio_host_win_add(container, 0, (hwaddr)-1, info.iova_pgsizes);
> + container->pgsizes = info.iova_pgsizes;
> } else if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU) ||
> ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_v2_IOMMU)) {
> struct vfio_iommu_spapr_tce_info info;
> @@ -1172,6 +1173,7 @@ static int vfio_connect_container(VFIOGroup *group,
> AddressSpace *as,
> }
>
> if (v2) {
> + container->pgsizes = info.ddw.pgsizes;
> /*
> * There is a default window in just created container.
> * To make region_add/del simpler, we better remove this
> @@ -1186,6 +1188,7 @@ static int vfio_connect_container(VFIOGroup *group,
> AddressSpace *as,
> }
> } else {
> /* The default table uses 4K pages */
> + container->pgsizes = 0x1000;
> vfio_host_win_add(container, info.dma32_window_start,
> info.dma32_window_start +
> info.dma32_window_size - 1,
> diff --git a/hw/vfio/spapr.c b/hw/vfio/spapr.c
> index 259397c..becf71a 100644
> --- a/hw/vfio/spapr.c
> +++ b/hw/vfio/spapr.c
> @@ -15,6 +15,7 @@
>
> #include "hw/vfio/vfio-common.h"
> #include "hw/hw.h"
> +#include "exec/ram_addr.h"
> #include "qemu/error-report.h"
> #include "trace.h"
>
> @@ -144,9 +145,27 @@ int vfio_spapr_create_window(VFIOContainer *container,
> {
> int ret;
> IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr);
> - unsigned pagesize = memory_region_iommu_get_min_page_size(iommu_mr);
> + uint64_t pagesize = memory_region_iommu_get_min_page_size(iommu_mr);
> unsigned entries, pages;
> struct vfio_iommu_spapr_tce_create create = { .argsz = sizeof(create) };
> + long systempagesize = qemu_getrampagesize();
> +
> + /*
> + * The host might not support the guest supported IOMMU page size,
> + * so we will use smaller physical IOMMU pages to back them.
> + */
> + if (pagesize > systempagesize) {
> + pagesize = systempagesize;
> + }
> + pagesize = 1ULL << (63 - clz64(container->pgsizes &
> + (pagesize | (pagesize - 1))));
> + if (!pagesize) {
> + error_report("Host doesn't support page size 0x%"PRIx64
> + ", the supported mask is 0x%lx",
> + memory_region_iommu_get_min_page_size(iommu_mr),
> + container->pgsizes);
> + return -EINVAL;
> + }
>
> /*
> * FIXME: For VFIO iommu types which have KVM acceleration to
>
--
Alexey
- Re: [Qemu-ppc] [PATCH qemu v2] vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages,
Alexey Kardashevskiy <=