[Qemu-ppc] [PATCH for-2.13 2/4] platform-bus-device: use device plug callback instead of machine_done notifier

[Igor Mammedov]

platform-bus were using machine_done notifier to get and map
(assign irq/mmio resources) dynamically added sysbus devices
after all '-device' options had been processed.
That however creates non obvious dependencies on ordering of
machine_done notifiers and requires carefull line juggling
to keep it working. For example see comment above
create_platform_bus() and 'straitforward' arm_load_kernel()
had to converted to machine_done notifier and that lead to
yet another machine_done notifier to keep it working
arm_register_platform_bus_fdt_creator().

Instead of hiding resource assignment in platform-bus-device
to magically initialize sysbus devices, use device plug
callback and assign resources explicitly at board level
at the moment each -device option is being processed.

That adds a bunch of machine declaration boiler plate to
e500plat board, similar to ARM/x86 but gets rid of hidden
machine_done notifier and would allow to remove the dependent
notifiers in ARM code simplifying it and making code flow
easier to follow.

Signed-off-by: Igor Mammedov <address@hidden>
---
CC: address@hidden
CC: address@hidden
CC: address@hidden
---
 hw/ppc/e500.h             |  3 +++
 include/hw/arm/virt.h     |  3 +++
 include/hw/platform-bus.h |  4 ++--
 hw/arm/sysbus-fdt.c       |  3 ---
 hw/arm/virt.c             | 36 ++++++++++++++++++++++++++++
 hw/core/platform-bus.c    | 29 ++++-------------------
 hw/ppc/e500.c             | 37 +++++++++++++++++------------
 hw/ppc/e500plat.c         | 60 +++++++++++++++++++++++++++++++++++++++++++++--
 8 files changed, 129 insertions(+), 46 deletions(-)

diff --git a/hw/ppc/e500.h b/hw/ppc/e500.h
index 70ba1d8..d0f8ddd 100644
--- a/hw/ppc/e500.h
+++ b/hw/ppc/e500.h
@@ -2,6 +2,7 @@
 #define PPCE500_H
 
 #include "hw/boards.h"
+#include "hw/sysbus.h"
 
 typedef struct PPCE500Params {
     int pci_first_slot;
@@ -26,6 +27,8 @@ typedef struct PPCE500Params {
 
 void ppce500_init(MachineState *machine, PPCE500Params *params);
 
+void ppce500_plug_dynamic_sysbus_device(SysBusDevice *sbdev);
+
 hwaddr booke206_page_size_to_tlb(uint64_t size);
 
 #endif
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index ba0c1a4..5535760 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -86,11 +86,14 @@ typedef struct {
     bool no_pmu;
     bool claim_edge_triggered_timers;
     bool smbios_old_sys_ver;
+    HotplugHandler *(*get_hotplug_handler)(MachineState *machine,
+                                           DeviceState *dev);
 } VirtMachineClass;
 
 typedef struct {
     MachineState parent;
     Notifier machine_done;
+    DeviceState *platform_bus_dev;
     FWCfgState *fw_cfg;
     bool secure;
     bool highmem;
diff --git a/include/hw/platform-bus.h b/include/hw/platform-bus.h
index a00775c..19e20c5 100644
--- a/include/hw/platform-bus.h
+++ b/include/hw/platform-bus.h
@@ -37,8 +37,6 @@ typedef struct PlatformBusDevice PlatformBusDevice;
 struct PlatformBusDevice {
     /*< private >*/
     SysBusDevice parent_obj;
-    Notifier notifier;
-    bool done_gathering;
 
     /*< public >*/
     uint32_t mmio_size;
@@ -54,4 +52,6 @@ int platform_bus_get_irqn(PlatformBusDevice *platform_bus, 
SysBusDevice *sbdev,
 hwaddr platform_bus_get_mmio_addr(PlatformBusDevice *pbus, SysBusDevice *sbdev,
                                   int n);
 
+void platform_bus_link_device(PlatformBusDevice *pbus, SysBusDevice *sbdev);
+
 #endif /* HW_PLATFORM_BUS_H */
diff --git a/hw/arm/sysbus-fdt.c b/hw/arm/sysbus-fdt.c
index d68e3dc..80ff70e 100644
--- a/hw/arm/sysbus-fdt.c
+++ b/hw/arm/sysbus-fdt.c
@@ -506,9 +506,6 @@ static void 
add_all_platform_bus_fdt_nodes(ARMPlatformBusFDTParams *fdt_params)
     dev = qdev_find_recursive(sysbus_get_default(), TYPE_PLATFORM_BUS_DEVICE);
     pbus = PLATFORM_BUS_DEVICE(dev);
 
-    /* We can only create dt nodes for dynamic devices when they're ready */
-    assert(pbus->done_gathering);
-
     PlatformBusFDTData data = {
         .fdt = fdt,
         .irq_start = irq_start,
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 94dcb12..2e10d8b 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1087,6 +1087,7 @@ static void create_platform_bus(VirtMachineState *vms, 
qemu_irq *pic)
     qdev_prop_set_uint32(dev, "mmio_size",
         platform_bus_params.platform_bus_size);
     qdev_init_nofail(dev);
+    vms->platform_bus_dev = dev;
     s = SYS_BUS_DEVICE(dev);
 
     for (i = 0; i < platform_bus_params.platform_bus_num_irqs; i++) {
@@ -1536,9 +1537,37 @@ static const CPUArchIdList 
*virt_possible_cpu_arch_ids(MachineState *ms)
     return ms->possible_cpus;
 }
 
+static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev,
+                                        DeviceState *dev, Error **errp)
+{
+    VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
+
+    if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
+        if (vms->platform_bus_dev) {
+            
platform_bus_link_device(PLATFORM_BUS_DEVICE(vms->platform_bus_dev),
+                                     SYS_BUS_DEVICE(dev));
+        }
+    }
+}
+
+static HotplugHandler *virt_machine_get_hotpug_handler(MachineState *machine,
+                                                       DeviceState *dev)
+{
+    VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(machine);
+
+    if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
+        return HOTPLUG_HANDLER(machine);
+    }
+
+    return vmc->get_hotplug_handler ?
+        vmc->get_hotplug_handler(machine, dev) : NULL;
+}
+
 static void virt_machine_class_init(ObjectClass *oc, void *data)
 {
     MachineClass *mc = MACHINE_CLASS(oc);
+    VirtMachineClass *vmc = VIRT_MACHINE_CLASS(oc);
+    HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
 
     mc->init = machvirt_init;
     /* Start max_cpus at the maximum QEMU supports. We'll further restrict
@@ -1557,6 +1586,9 @@ static void virt_machine_class_init(ObjectClass *oc, void 
*data)
     mc->cpu_index_to_instance_props = virt_cpu_index_to_props;
     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
     mc->get_default_cpu_node_id = virt_get_default_cpu_node_id;
+    vmc->get_hotplug_handler = mc->get_hotplug_handler;
+    mc->get_hotplug_handler = virt_machine_get_hotpug_handler;
+    hc->plug = virt_machine_device_plug_cb;
 }
 
 static const TypeInfo virt_machine_info = {
@@ -1566,6 +1598,10 @@ static const TypeInfo virt_machine_info = {
     .instance_size = sizeof(VirtMachineState),
     .class_size    = sizeof(VirtMachineClass),
     .class_init    = virt_machine_class_init,
+    .interfaces = (InterfaceInfo[]) {
+         { TYPE_HOTPLUG_HANDLER },
+         { }
+    },
 };
 
 static void machvirt_machine_init(void)
diff --git a/hw/core/platform-bus.c b/hw/core/platform-bus.c
index 33d32fb..807cb5c 100644
--- a/hw/core/platform-bus.c
+++ b/hw/core/platform-bus.c
@@ -103,7 +103,6 @@ static void plaform_bus_refresh_irqs(PlatformBusDevice 
*pbus)
 {
     bitmap_zero(pbus->used_irqs, pbus->num_irqs);
     foreach_dynamic_sysbus_device(platform_bus_count_irqs, pbus);
-    pbus->done_gathering = true;
 }
 
 static void platform_bus_map_irq(PlatformBusDevice *pbus, SysBusDevice *sbdev,
@@ -163,12 +162,11 @@ static void platform_bus_map_mmio(PlatformBusDevice 
*pbus, SysBusDevice *sbdev,
 }
 
 /*
- * For each sysbus device, look for unassigned IRQ lines as well as
- * unassociated MMIO regions. Connect them to the platform bus if available.
+ * Look for unassigned IRQ lines as well as unassociated MMIO regions.
+ * Connect them to the platform bus if available.
  */
-static void link_sysbus_device(SysBusDevice *sbdev, void *opaque)
+void platform_bus_link_device(PlatformBusDevice *pbus, SysBusDevice *sbdev)
 {
-    PlatformBusDevice *pbus = opaque;
     int i;
 
     for (i = 0; sysbus_has_irq(sbdev, i); i++) {
@@ -180,19 +178,6 @@ static void link_sysbus_device(SysBusDevice *sbdev, void 
*opaque)
     }
 }
 
-static void platform_bus_init_notify(Notifier *notifier, void *data)
-{
-    PlatformBusDevice *pb = container_of(notifier, PlatformBusDevice, 
notifier);
-
-    /*
-     * Generate a bitmap of used IRQ lines, as the user might have specified
-     * them on the command line.
-     */
-    plaform_bus_refresh_irqs(pb);
-
-    foreach_dynamic_sysbus_device(link_sysbus_device, pb);
-}
-
 static void platform_bus_realize(DeviceState *dev, Error **errp)
 {
     PlatformBusDevice *pbus;
@@ -211,12 +196,8 @@ static void platform_bus_realize(DeviceState *dev, Error 
**errp)
         sysbus_init_irq(d, &pbus->irqs[i]);
     }
 
-    /*
-     * Register notifier that allows us to gather dangling devices once the
-     * machine is completely assembled
-     */
-    pbus->notifier.notify = platform_bus_init_notify;
-    qemu_add_machine_init_done_notifier(&pbus->notifier);
+    /* some devices might be initialized before so update used IRQs map */
+    plaform_bus_refresh_irqs(pbus);
 }
 
 static Property platform_bus_properties[] = {
diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index 9a85a41..e2829db 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -64,6 +64,8 @@
 #define MPC8XXX_GPIO_OFFSET        0x000FF000ULL
 #define MPC8XXX_GPIO_IRQ           47
 
+static SysBusDevice *pbus_dev;
+
 struct boot_info
 {
     uint32_t dt_base;
@@ -248,23 +250,28 @@ static void platform_bus_create_devtree(PPCE500Params 
*params, void *fdt,
     dev = qdev_find_recursive(sysbus_get_default(), TYPE_PLATFORM_BUS_DEVICE);
     pbus = PLATFORM_BUS_DEVICE(dev);
 
-    /* We can only create dt nodes for dynamic devices when they're ready */
-    if (pbus->done_gathering) {
-        PlatformDevtreeData data = {
-            .fdt = fdt,
-            .mpic = mpic,
-            .irq_start = irq_start,
-            .node = node,
-            .pbus = pbus,
-        };
+    /* Create dt nodes for dynamic devices */
+    PlatformDevtreeData data = {
+        .fdt = fdt,
+        .mpic = mpic,
+        .irq_start = irq_start,
+        .node = node,
+        .pbus = pbus,
+    };
 
-        /* Loop through all dynamic sysbus devices and create nodes for them */
-        foreach_dynamic_sysbus_device(sysbus_device_create_devtree, &data);
-    }
+    /* Loop through all dynamic sysbus devices and create nodes for them */
+    foreach_dynamic_sysbus_device(sysbus_device_create_devtree, &data);
 
     g_free(node);
 }
 
+void ppce500_plug_dynamic_sysbus_device(SysBusDevice *sbdev)
+{
+    if (pbus_dev) {
+        platform_bus_link_device(PLATFORM_BUS_DEVICE(pbus_dev), sbdev);
+    }
+}
+
 static int ppce500_load_device_tree(MachineState *machine,
                                     PPCE500Params *params,
                                     hwaddr addr,
@@ -945,16 +952,16 @@ void ppce500_init(MachineState *machine, PPCE500Params 
*params)
         qdev_prop_set_uint32(dev, "num_irqs", params->platform_bus_num_irqs);
         qdev_prop_set_uint32(dev, "mmio_size", params->platform_bus_size);
         qdev_init_nofail(dev);
-        s = SYS_BUS_DEVICE(dev);
+        pbus_dev = SYS_BUS_DEVICE(dev);
 
         for (i = 0; i < params->platform_bus_num_irqs; i++) {
             int irqn = params->platform_bus_first_irq + i;
-            sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, irqn));
+            sysbus_connect_irq(pbus_dev, i, qdev_get_gpio_in(mpicdev, irqn));
         }
 
         memory_region_add_subregion(address_space_mem,
                                     params->platform_bus_base,
-                                    sysbus_mmio_get_region(s, 0));
+                                    sysbus_mmio_get_region(pbus_dev, 0));
     }
 
     /*
diff --git a/hw/ppc/e500plat.c b/hw/ppc/e500plat.c
index 81d03e1..2f014cc 100644
--- a/hw/ppc/e500plat.c
+++ b/hw/ppc/e500plat.c
@@ -60,8 +60,49 @@ static void e500plat_init(MachineState *machine)
     ppce500_init(machine, &params);
 }
 
-static void e500plat_machine_init(MachineClass *mc)
+typedef struct {
+    MachineClass parent;
+    HotplugHandler *(*get_hotplug_handler)(MachineState *machine,
+                                           DeviceState *dev);
+} E500PlatMachineClass;
+
+#define TYPE_E500PLAT_MACHINE  MACHINE_TYPE_NAME("ppce500")
+#define E500PLAT_MACHINE_GET_CLASS(obj) \
+    OBJECT_GET_CLASS(E500PlatMachineClass, obj, TYPE_E500PLAT_MACHINE)
+#define E500PLAT_MACHINE_CLASS(klass) \
+    OBJECT_CLASS_CHECK(E500PlatMachineClass, klass, TYPE_E500PLAT_MACHINE)
+
+static void e500plat_machine_device_plug_cb(HotplugHandler *hotplug_dev,
+                                            DeviceState *dev, Error **errp)
 {
+    if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
+        ppce500_plug_dynamic_sysbus_device(SYS_BUS_DEVICE(dev));
+    }
+}
+
+static
+HotplugHandler *e500plat_machine_get_hotpug_handler(MachineState *machine,
+                                                    DeviceState *dev)
+{
+    E500PlatMachineClass *emc = E500PLAT_MACHINE_GET_CLASS(machine);
+    if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
+        return HOTPLUG_HANDLER(machine);
+    }
+
+    return emc->get_hotplug_handler ?
+        emc->get_hotplug_handler(machine, dev) : NULL;
+}
+
+static void e500plat_machine_class_init(ObjectClass *oc, void *data)
+{
+    E500PlatMachineClass *emc = E500PLAT_MACHINE_CLASS(oc);
+    HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    emc->get_hotplug_handler = mc->get_hotplug_handler;
+    mc->get_hotplug_handler = e500plat_machine_get_hotpug_handler;
+    hc->plug = e500plat_machine_device_plug_cb;
+
     mc->desc = "generic paravirt e500 platform";
     mc->init = e500plat_init;
     mc->max_cpus = 32;
@@ -69,4 +110,19 @@ static void e500plat_machine_init(MachineClass *mc)
     mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("e500v2_v30");
 }
 
-DEFINE_MACHINE("ppce500", e500plat_machine_init)
+static const TypeInfo e500plat_info = {
+    .name          = TYPE_E500PLAT_MACHINE,
+    .parent        = TYPE_MACHINE,
+    .class_size    = sizeof(E500PlatMachineClass),
+    .class_init    = e500plat_machine_class_init,
+    .interfaces    = (InterfaceInfo[]) {
+         { TYPE_HOTPLUG_HANDLER },
+         { }
+    }
+};
+
+static void e500plat_register_types(void)
+{
+    type_register_static(&e500plat_info);
+}
+type_init(e500plat_register_types)
-- 
2.7.4