Re: [Qemu-ppc] [PATCH 02/12] spapr_pci: populate DRC dt entries for PHBs

[Alexey Kardashevskiy]

On 08/19/2014 10:21 AM, Michael Roth wrote:
> Reserve 32 entries of type PCI in each PHB's initial FDT. This
> advertises to guests that each PHB is DR-capable device with
> physical hotpluggable slots. This is necessary for allowing
> hotplugging of devices to it later via bus rescan or guest rpaphp
> hotplug module.
> 
> Each entry is assigned a name of "Slot <<bus_idx>*32 +1>",
> advertised as a hotpluggable PCI slot, and assigned to power domain
> -1 to indicate to the guest that power management is handled by the
> hardware.
> 
> This models a DR-capable PCI expansion device attached to a host/lpar
> via a single PHB with 32 physical hotpluggable slots (as opposed to a
> virtual bridge device with external management console). Hotplug will
> be handled by the guest via bus rescan or the rpaphp hotplug module.
> 
> Signed-off-by: Michael Roth <address@hidden>
> ---
>  hw/ppc/spapr.c              |   3 +-
>  hw/ppc/spapr_pci.c          | 102 
> ++++++++++++++++++++++++++++++++++++++++++++
>  include/hw/pci-host/spapr.h |   1 +
>  3 files changed, 105 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index d5e46c3..90b25b3 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -890,7 +890,8 @@ static void spapr_finalize_fdt(sPAPREnvironment *spapr,
>      QLIST_FOREACH(phb, &spapr->phbs, list) {
>          drc_entry = spapr_phb_to_drc_entry(phb->buid);
>          g_assert(drc_entry);
> -        ret = spapr_populate_pci_dt(phb, PHANDLE_XICP, fdt);
> +        ret = spapr_populate_pci_dt(phb, PHANDLE_XICP, drc_entry->drc_index,
> +                                    fdt);
>      }
>  
>      if (ret < 0) {
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index e85134f..924d488 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -851,8 +851,104 @@ static int spapr_phb_children_dt(Object *child, void 
> *opaque)
>      return 1;
>  }
>  
> +static void spapr_create_drc_phb_dt_entries(void *fdt, int bus_off, int 
> phb_index)
> +{
> +    char char_buf[1024];
> +    uint32_t int_buf[SPAPR_DRC_PHB_SLOT_MAX + 1];
> +    uint32_t *entries;
> +    int i, ret, offset;
> +
> +    /* ibm,drc-indexes */
> +    memset(int_buf, 0 , sizeof(int_buf));
> +    int_buf[0] = SPAPR_DRC_PHB_SLOT_MAX;
> +
> +    for (i = 1; i <= SPAPR_DRC_PHB_SLOT_MAX; i++) {
> +        int_buf[i] = SPAPR_DRC_DEV_ID_BASE + (phb_index << 8) + ((i - 1) << 
> 3);
> +    }
> +
> +    ret = fdt_setprop(fdt, bus_off, "ibm,drc-indexes", int_buf,
> +                      sizeof(int_buf));
> +    if (ret) {
> +        fprintf(stderr, "error adding 'ibm,drc-indexes' field for PHB FDT");
> +    }
> +
> +    /* ibm,drc-power-domains */
> +    memset(int_buf, 0, sizeof(int_buf));
> +    int_buf[0] = SPAPR_DRC_PHB_SLOT_MAX;
> +
> +    for (i = 1; i <= SPAPR_DRC_PHB_SLOT_MAX; i++) {
> +        int_buf[i] = 0xffffffff;
> +    }
> +
> +    ret = fdt_setprop(fdt, bus_off, "ibm,drc-power-domains", int_buf,
> +                      sizeof(int_buf));
> +    if (ret) {
> +        fprintf(stderr,
> +                "error adding 'ibm,drc-power-domains' field for PHB FDT");

As before - return here and below.

> +    }
> +
> +    /* ibm,drc-names */
> +    memset(char_buf, 0, sizeof(char_buf));
> +    entries = (uint32_t *)&char_buf[0];
> +    *entries = SPAPR_DRC_PHB_SLOT_MAX;
> +    offset = sizeof(*entries);
> +
> +    for (i = 1; i <= SPAPR_DRC_PHB_SLOT_MAX; i++) {
> +        offset += sprintf(char_buf + offset, "Slot %d",
> +                          (phb_index * SPAPR_DRC_PHB_SLOT_MAX) + i - 1);

Mmmm. From 1 to <=MAX and (i-1) inside the loop when it could be
traditional  0 to <MAX and (i) as it is done below :)


> +        char_buf[offset++] = '\0';


sprintf() puts zero there itself, no? And as we are here, should not it be
snprintf()?


> +    }
> +
> +    ret = fdt_setprop(fdt, bus_off, "ibm,drc-names", char_buf, offset);
> +    if (ret) {
> +        fprintf(stderr, "error adding 'ibm,drc-names' field for PHB FDT");
> +    }
> +
> +    /* ibm,drc-types */
> +    memset(char_buf, 0, sizeof(char_buf));
> +    entries = (uint32_t *)&char_buf[0];
> +    *entries = SPAPR_DRC_PHB_SLOT_MAX;
> +    offset = sizeof(*entries);
> +
> +    for (i = 0; i < SPAPR_DRC_PHB_SLOT_MAX; i++) {
> +        offset += sprintf(char_buf + offset, "28");
> +        char_buf[offset++] = '\0';
> +    }
> +
> +    ret = fdt_setprop(fdt, bus_off, "ibm,drc-types", char_buf, offset);
> +    if (ret) {
> +        fprintf(stderr, "error adding 'ibm,drc-types' field for PHB FDT");
> +    }
> +
> +    /* we want the initial indicator state to be 0 - "empty", when we
> +     * hot-plug an adaptor in the slot, we need to set the indicator
> +     * to 1 - "present."
> +     */
> +
> +    /* ibm,indicator-9003 */
> +    memset(int_buf, 0, sizeof(int_buf));
> +    int_buf[0] = SPAPR_DRC_PHB_SLOT_MAX;
> +
> +    ret = fdt_setprop(fdt, bus_off, "ibm,indicator-9003", int_buf,
> +                      sizeof(int_buf));
> +    if (ret) {
> +        fprintf(stderr, "error adding 'ibm,indicator-9003' field for PHB 
> FDT");
> +    }
> +
> +    /* ibm,sensor-9003 */
> +    memset(int_buf, 0, sizeof(int_buf));
> +    int_buf[0] = SPAPR_DRC_PHB_SLOT_MAX;
> +
> +    ret = fdt_setprop(fdt, bus_off, "ibm,sensor-9003", int_buf,
> +                      sizeof(int_buf));
> +    if (ret) {
> +        fprintf(stderr, "error adding 'ibm,sensor-9003' field for PHB FDT");
> +    }
> +}
> +
>  int spapr_populate_pci_dt(sPAPRPHBState *phb,
>                            uint32_t xics_phandle,
> +                          uint32_t drc_index,
>                            void *fdt)
>  {
>      int bus_off, i, j;
> @@ -934,6 +1030,12 @@ int spapr_populate_pci_dt(sPAPRPHBState *phb,
>      object_child_foreach(OBJECT(phb), spapr_phb_children_dt,
>                           &((sPAPRTCEDT){ .fdt = fdt, .node_off = bus_off }));
>  
> +    spapr_create_drc_phb_dt_entries(fdt, bus_off, phb->index);
> +    if (drc_index) {
> +        _FDT(fdt_setprop(fdt, bus_off, "ibm,my-drc-index", &drc_index,
> +                         sizeof(drc_index)));
> +    }
> +
>      return 0;
>  }
>  
> diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
> index 32f0aa7..8f0a42f 100644
> --- a/include/hw/pci-host/spapr.h
> +++ b/include/hw/pci-host/spapr.h
> @@ -116,6 +116,7 @@ PCIHostState *spapr_create_phb(sPAPREnvironment *spapr, 
> int index);
>  
>  int spapr_populate_pci_dt(sPAPRPHBState *phb,
>                            uint32_t xics_phandle,
> +                          uint32_t drc_index,
>                            void *fdt);
>  
>  void spapr_pci_msi_init(sPAPREnvironment *spapr, hwaddr addr);
> 


-- 
Alexey