[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [Qemu-devel] [PATCH 04/15] PPC: dbdma: Replace tabs with
From: |
Alexander Graf |
Subject: |
Re: [Qemu-ppc] [Qemu-devel] [PATCH 04/15] PPC: dbdma: Replace tabs with spaces |
Date: |
Sun, 30 Jun 2013 13:21:04 +0200 |
Am 30.06.2013 um 08:35 schrieb Andreas Färber <address@hidden>:
> Am 30.06.2013 03:26, schrieb Alexander Graf:
>> s/^I/ /g on the file with a few manual tweaks to align things.
>>
>> Signed-off-by: Alexander Graf <address@hidden>
>> ---
>> hw/misc/macio/mac_dbdma.c | 102
>> +++++++++++++++++++++++-----------------------
>> 1 file changed, 51 insertions(+), 51 deletions(-)
>>
>> diff --git a/hw/misc/macio/mac_dbdma.c b/hw/misc/macio/mac_dbdma.c
>> index 2fc7f87..ab174f5 100644
>> --- a/hw/misc/macio/mac_dbdma.c
>> +++ b/hw/misc/macio/mac_dbdma.c
>> @@ -85,75 +85,75 @@
>>
>> /* Bits in control and status registers */
>>
>> -#define RUN 0x8000
>> -#define PAUSE 0x4000
>> -#define FLUSH 0x2000
>> -#define WAKE 0x1000
>> -#define DEAD 0x0800
>> -#define ACTIVE 0x0400
>> -#define BT 0x0100
>> -#define DEVSTAT 0x00ff
>> +#define RUN 0x8000
>> +#define PAUSE 0x4000
>> +#define FLUSH 0x2000
>> +#define WAKE 0x1000
>> +#define DEAD 0x0800
>> +#define ACTIVE 0x0400
>> +#define BT 0x0100
>> +#define DEVSTAT 0x00ff
>>
>> /*
>> * DBDMA command structure. These fields are all little-endian!
>> */
>>
>> typedef struct dbdma_cmd {
>> - uint16_t req_count; /* requested byte transfer count */
>> - uint16_t command; /* command word (has bit-fields) */
>> - uint32_t phy_addr; /* physical data address */
>> - uint32_t cmd_dep; /* command-dependent field */
>> - uint16_t res_count; /* residual count after completion */
>> - uint16_t xfer_status; /* transfer status */
>> + uint16_t req_count; /* requested byte transfer count */
>> + uint16_t command; /* command word (has bit-fields) */
>> + uint32_t phy_addr; /* physical data address */
>> + uint32_t cmd_dep; /* command-dependent field */
>> + uint16_t res_count; /* residual count after completion */
>> + uint16_t xfer_status; /* transfer status */
>> } dbdma_cmd;
>>
>> /* DBDMA command values in command field */
>>
>> #define COMMAND_MASK 0xf000
>> -#define OUTPUT_MORE 0x0000 /* transfer memory data to stream */
>> -#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */
>> -#define INPUT_MORE 0x2000 /* transfer stream data to memory */
>> -#define INPUT_LAST 0x3000 /* ditto, expect end marker */
>> -#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */
>> -#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */
>> -#define DBDMA_NOP 0x6000 /* do nothing */
>> -#define DBDMA_STOP 0x7000 /* suspend processing */
>> +#define OUTPUT_MORE 0x0000 /* transfer memory data to stream */
>> +#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */
>> +#define INPUT_MORE 0x2000 /* transfer stream data to memory */
>> +#define INPUT_LAST 0x3000 /* ditto, expect end marker */
>> +#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg
>> */
>> +#define LOAD_WORD 0x5000 /* read word (4 bytes) from device
>> reg */
>> +#define DBDMA_NOP 0x6000 /* do nothing */
>> +#define DBDMA_STOP 0x7000 /* suspend processing */
>>
>> /* Key values in command field */
>>
>> #define KEY_MASK 0x0700
>> -#define KEY_STREAM0 0x0000 /* usual data stream */
>> -#define KEY_STREAM1 0x0100 /* control/status stream */
>> -#define KEY_STREAM2 0x0200 /* device-dependent stream */
>> -#define KEY_STREAM3 0x0300 /* device-dependent stream */
>> -#define KEY_STREAM4 0x0400 /* reserved */
>> -#define KEY_REGS 0x0500 /* device register space */
>> -#define KEY_SYSTEM 0x0600 /* system memory-mapped space */
>> -#define KEY_DEVICE 0x0700 /* device memory-mapped space */
>> +#define KEY_STREAM0 0x0000 /* usual data stream */
>> +#define KEY_STREAM1 0x0100 /* control/status stream */
>> +#define KEY_STREAM2 0x0200 /* device-dependent stream */
>> +#define KEY_STREAM3 0x0300 /* device-dependent stream */
>> +#define KEY_STREAM4 0x0400 /* reserved */
>> +#define KEY_REGS 0x0500 /* device register space */
>> +#define KEY_SYSTEM 0x0600 /* system memory-mapped space */
>> +#define KEY_DEVICE 0x0700 /* device memory-mapped space */
>>
>> /* Interrupt control values in command field */
>>
>> #define INTR_MASK 0x0030
>> -#define INTR_NEVER 0x0000 /* don't interrupt */
>> -#define INTR_IFSET 0x0010 /* intr if condition bit is 1 */
>> -#define INTR_IFCLR 0x0020 /* intr if condition bit is 0 */
>> -#define INTR_ALWAYS 0x0030 /* always interrupt */
>> +#define INTR_NEVER 0x0000 /* don't interrupt */
>> +#define INTR_IFSET 0x0010 /* intr if condition bit is 1 */
>> +#define INTR_IFCLR 0x0020 /* intr if condition bit is 0 */
>> +#define INTR_ALWAYS 0x0030 /* always interrupt */
>>
>> /* Branch control values in command field */
>>
>> #define BR_MASK 0x000c
>> -#define BR_NEVER 0x0000 /* don't branch */
>> -#define BR_IFSET 0x0004 /* branch if condition bit is 1 */
>> -#define BR_IFCLR 0x0008 /* branch if condition bit is 0 */
>> -#define BR_ALWAYS 0x000c /* always branch */
>> +#define BR_NEVER 0x0000 /* don't branch */
>> +#define BR_IFSET 0x0004 /* branch if condition bit is 1 */
>> +#define BR_IFCLR 0x0008 /* branch if condition bit is 0 */
>> +#define BR_ALWAYS 0x000c /* always branch */
>>
>> /* Wait control values in command field */
>>
>> #define WAIT_MASK 0x0003
>> -#define WAIT_NEVER 0x0000 /* don't wait */
>> -#define WAIT_IFSET 0x0001 /* wait if condition bit is 1 */
>> -#define WAIT_IFCLR 0x0002 /* wait if condition bit is 0 */
>> -#define WAIT_ALWAYS 0x0003 /* always wait */
>> +#define WAIT_NEVER 0x0000 /* don't wait */
>> +#define WAIT_IFSET 0x0001 /* wait if condition bit is 1 */
>> +#define WAIT_IFCLR 0x0002 /* wait if condition bit is 0 */
>> +#define WAIT_ALWAYS 0x0003 /* always wait */
>>
>> typedef struct DBDMA_channel {
>> int channel;
>> @@ -558,11 +558,11 @@ static void channel_run(DBDMA_channel *ch)
>> switch (cmd) {
>> case DBDMA_NOP:
>> nop(ch);
>> - return;
>> + return;
>>
>> case DBDMA_STOP:
>> stop(ch);
>> - return;
>> + return;
>> }
>>
>> key = le16_to_cpu(current->command) & 0x0700;
>> @@ -578,19 +578,19 @@ static void channel_run(DBDMA_channel *ch)
>> switch (cmd) {
>> case OUTPUT_MORE:
>> start_output(ch, key, phy_addr, req_count, 0);
>> - return;
>> + return;
>>
>> case OUTPUT_LAST:
>> start_output(ch, key, phy_addr, req_count, 1);
>> - return;
>> + return;
>>
>> case INPUT_MORE:
>> start_input(ch, key, phy_addr, req_count, 0);
>> - return;
>> + return;
>>
>> case INPUT_LAST:
>> start_input(ch, key, phy_addr, req_count, 1);
>> - return;
>> + return;
>> }
>>
>> if (key < KEY_REGS) {
>> @@ -615,11 +615,11 @@ static void channel_run(DBDMA_channel *ch)
>> switch (cmd) {
>> case LOAD_WORD:
>> load_word(ch, key, phy_addr, req_count);
>> - return;
>> + return;
>>
>> case STORE_WORD:
>> store_word(ch, key, phy_addr, req_count);
>> - return;
>> + return;
>> }
>> }
>>
>> @@ -720,7 +720,7 @@ static void dbdma_write(void *opaque, hwaddr addr,
>>
>> if (reg == DBDMA_CMDPTR_LO &&
>> (ch->regs[DBDMA_STATUS] & (RUN | ACTIVE)))
>> - return;
>> + return;
>
> Add braces while at it? Otherwise fine.
This patch is supposed to be mechanical. I've added braces at this spot in a
later patch, when I actually touched the code.
Alex
>
> Andreas
>
>>
>> ch->regs[reg] = value;
>
>
> --
> SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
- [Qemu-ppc] [PATCH 01/15] PPC: Mac: Fix guest exported tbfreq values, (continued)
- [Qemu-ppc] [PATCH 01/15] PPC: Mac: Fix guest exported tbfreq values, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 07/15] PPC: dbdma: Allow new commands in RUN state, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 09/15] PPC: dbdma: Introduce kick function, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 12/15] PPC: dbdma: Move processing to io, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 13/15] PPC: dbdma: Wait for DMA until we have data, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 11/15] PPC: dbdma: macio: Add DMA callback, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 10/15] PPC: dbdma: Move static bh variable to device struct, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 04/15] PPC: dbdma: Replace tabs with spaces, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 05/15] PPC: Mac: Add debug prints in macio and dbdma code, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 02/15] PPC: g3beige: Move secondary IDE bus to mac-io, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 08/15] PPC: dbdma: Move defines into header file, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 14/15] PPC: dbdma: Support unaligned DMA access, Alexander Graf, 2013/06/29
- [Qemu-ppc] [PATCH 15/15] PPC: Update PPC OpenBIOS, Alexander Graf, 2013/06/30