[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] AIX 6.1 on Qemu - attempt for GIT of 2012/11/27 host brid
From: |
folkert |
Subject: |
Re: [Qemu-ppc] AIX 6.1 on Qemu - attempt for GIT of 2012/11/27 host bridges |
Date: |
Tue, 27 Nov 2012 22:56:41 +0100 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
When I use -cpu POWER7 it gives me:
-------------------------------------------------------------------------------
Welcome to AIX.
boot image timestamp: 21:23 09/01
processor count: 2; memory size: 4096MB; kernel size: 35064581
boot device:
/vdevice/address@hidden/address@hidden,0:\ppc\chrp\bootfile.exe
8000FFEC bytes of free memory remain at address 7FFF0014
load address: 0x00004000 aixmon size: 0x000CAC00 boot image size:
0x00F533A0
AIX is starting.
get-property for #bytes on zero phandle
The temporary memory region list is at 1 percent capacity.
The temporary IPLCB is at 1 percent capacity.
Activating physical CPU#001... done.
The IPLCB address is 0x0FFFC000
name offset size
ipl_cb_and_bit_map 00000000 ......000027F8
bit_map........... 000006E0 ......00000006
ipl_info.......... 00000178 ......00000024
system_info....... 0000019C ......000000BC
processor_info.... 00000258 ......00000390
lpar_id_info...... 000005E8 ......00000088
lpar_info......... 00000670 ......00000014
processor page.... 00000690 ......00000010
residual.......... 00000770 ......00002088
fwad_info......... 000006A0 ......00000040
region address region length attr label
0 0x0000000000000000 0x000000000FFFA000 0x01 0x01
1 0x000000000FFFA000 0x0000000000002000 0x01 0x03
2 0x000000000FFFC000 0x0000000000003000 0x01 0x02
3 0x000000000FFFF000 0x0000000000000014 0x00 0x05
4 0x000000000FFFF014 0x00000000F0000FEC 0x01 0x01
5 0x0000000100000000 0xFFFFFFFF00000000 0x00 0x07
----------------------------
0000012C bytes of free memory remain at address 00004000
compressed kernel addr: CEC00; sz: 7F9391; uncompressed kernel addr:
DE88400
name source dest size flags
.data E868640 2000000 124BF48 1
basecfg 0 0 0 0
ramfs 8C7FA0 E869000 68F220 1
.text DE88640 CEC00 9E0000 1
.ldr FAB4588 AAF000 8A95B 1
symtab FE47AE0 B3A000 1B1425 1
kern. hdr DE88400 0 240 1
.bss 0 324BF48 25540B8 2
end of BSS: 057A0000; RAM filesystem: 0F968000
entry_point: 0x000CEC28
kernel debugger setting: enabled
-------------------------------------------------------------------------------
Starting kernel
h_get_ppp might not be right yet
Trying to write invalid spr 157 09d at 000000000036dc3c
On Tue, Nov 27, 2012 at 10:49:51PM +0100, folkert wrote:
> For fun and kicks I tried booting AIX 7.1 on Qemu (the one from GIT):
>
>
> -------------------------------------------------------------------------------
> Welcome to AIX.
> boot image timestamp: 21:23 09/01
> processor count: 0; memory size: 0MB; kernel size: 35064581
> boot device:
> /vdevice/address@hidden/address@hidden,0:\ppc\chrp\bootfile.exe
>
>
>
> get-property for available on zero phandle
>
>
> 00000000 bytes of free memory remain at address 00000000
>
>
>
> get-property for cpu-version on zero phandle
>
>
>
>
> get-property for 64-bit on zero phandle
>
>
>
>
> get-property for name on zero phandle
>
>
>
>
> ERROR: This system is not supported for use with AIX 6.1.
> model: IBM pSeries (emulated by qemu) processor: ��
>
>
> AIX 6 requires the POWER4 (or later) processor.
>
>
> W3411: Client application returned.
>
> E3406: Client application returned an error.
>
> ..`. .. ....... .. ...... .......
> ..`...`''.`'. .''``````..''. .`''```''`. `''``````
> .`` .:' ': `''..... .''. ''` .''..''.......
> ``.':.';. ``````''`.''. .''. ''``''`````'`
> ``.':':` .....`''.`'`...... `'`.....`''.`'`
> .`.`'`` .'`'`````. ``'''''' ``''`'''`. `'`
> Type 'boot' and press return to continue booting the system.
> Type 'reset-all' and press return to reboot the system.
> -------------------------------------------------------------------------------
>
> So it is getting further! Because before it would hang add a get-property if
> I remember correctly.
>
> If someone else wants to give it a try, I use the following commandline:
>
> /usr/local/qemu/bin/qemu-system-ppc64 -machine type=pseries -cpu POWER7_v2.3
> -smp 2 -m 4096 -mem-path /home/folkert/qip.bin -net tap -rtc base=localtime
> -cdrom
> /home/folkert/ISOs/AIX_7.1_Base_Operating_System_TL_7100-00-01_DVD_1_of_2_102010.iso
> -boot d -nographic
>
> I'm a bit surprised that it says that it is aix 6.
>
>
> Folkert van Heusden
>
> --
> Nagios user? Check out CoffeeSaint - the versatile Nagios status
> viewer! http://www.vanheusden.com/java/CoffeeSaint/
> ----------------------------------------------------------------------
> Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
Folkert van Heusden
--
www.vanheusden.com/multitail - multitail is tail on steroids. multiple
windows, filtering, coloring, anything you can think of
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com