[Qemu-ppc] [PATCH 2/2] vfio-powerpc: added VFIO support

[Alexey Kardashevskiy]

The patch enables VFIO on POWER.

It literally does the following:

1. POWERPC IOMMU support (the kernel counterpart is required)

2. Added #ifdef TARGET_PPC64 for EOI handlers initialisation.

3. Added vfio_get_container_fd() to VFIO in order to initialize 1).

4. Makefile fixed and "is_vfio" flag added into sPAPR PHB - required to
distinguish VFIO's DMA context from the emulated one.

WIth the pathes posted today a bit earlier, this patch fully supports
VFIO what includes MSIX as well,


Signed-off-by: Alexey Kardashevskiy <address@hidden>
---
 hw/ppc/Makefile.objs |    3 ++
 hw/spapr.h           |    4 +++
 hw/spapr_iommu.c     |   87 ++++++++++++++++++++++++++++++++++++++++++++++++++
 hw/spapr_pci.c       |   23 ++++++++++++-
 hw/spapr_pci.h       |    2 ++
 hw/vfio_pci.c        |   76 +++++++++++++++++++++++++++++++++++++++++--
 hw/vfio_pci.h        |    2 ++
 7 files changed, 193 insertions(+), 4 deletions(-)

diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index f573a95..c46a049 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -25,4 +25,7 @@ obj-$(CONFIG_FDT) += ../device_tree.o
 # Xilinx PPC peripherals
 obj-y += xilinx_ethlite.o
 
+# VFIO PCI device assignment
+obj-$(CONFIG_VFIO_PCI) += vfio_pci.o
+
 obj-y := $(addprefix ../,$(obj-y))
diff --git a/hw/spapr.h b/hw/spapr.h
index b37f337..9dca704 100644
--- a/hw/spapr.h
+++ b/hw/spapr.h
@@ -340,4 +340,8 @@ int spapr_dma_dt(void *fdt, int node_off, const char 
*propname,
 int spapr_tcet_dma_dt(void *fdt, int node_off, const char *propname,
                       DMAContext *dma);
 
+void spapr_vfio_init_dma(int fd, uint32_t liobn,
+                         uint64_t *dma32_window_start,
+                         uint64_t *dma32_window_size);
+
 #endif /* !defined (__HW_SPAPR_H__) */
diff --git a/hw/spapr_iommu.c b/hw/spapr_iommu.c
index 50c288d..0a194e8 100644
--- a/hw/spapr_iommu.c
+++ b/hw/spapr_iommu.c
@@ -16,6 +16,8 @@
  * You should have received a copy of the GNU Lesser General Public
  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
  */
+#include <sys/ioctl.h>
+
 #include "hw.h"
 #include "kvm.h"
 #include "qdev.h"
@@ -23,6 +25,7 @@
 #include "dma.h"
 
 #include "hw/spapr.h"
+#include "hw/linux-vfio.h"
 
 #include <libfdt.h>
 
@@ -183,6 +186,86 @@ static int put_tce_emu(target_ulong liobn, target_ulong 
ioba, target_ulong tce)
     return 0;
 }
 
+/* -------- API for POWERPC IOMMU -------- */
+
+#define POWERPC_IOMMU           2
+
+struct tce_iommu_info {
+    __u32 argsz;
+    __u32 dma32_window_start;
+    __u32 dma32_window_size;
+};
+
+#define POWERPC_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+struct tce_iommu_dma_map {
+    __u32 argsz;
+    __u64 va;
+    __u64 dmaaddr;
+};
+
+#define POWERPC_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
+#define POWERPC_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
+
+typedef struct sPAPRVFIOTable {
+    int fd;
+    uint32_t liobn;
+    QLIST_ENTRY(sPAPRVFIOTable) list;
+} sPAPRVFIOTable;
+
+QLIST_HEAD(vfio_tce_tables, sPAPRVFIOTable) vfio_tce_tables;
+
+void spapr_vfio_init_dma(int fd, uint32_t liobn,
+                         uint64_t *dma32_window_start,
+                         uint64_t *dma32_window_size)
+{
+    sPAPRVFIOTable *t;
+    struct tce_iommu_info info = { .argsz = sizeof(info) };
+
+    if (ioctl(fd, POWERPC_IOMMU_GET_INFO, &info)) {
+        fprintf(stderr, "POWERPC_IOMMU_GET_INFO failed %d\n", errno);
+        return;
+    }
+    *dma32_window_start = info.dma32_window_start;
+    *dma32_window_size = info.dma32_window_size;
+
+    t = g_malloc0(sizeof(*t));
+    t->fd = fd;
+    t->liobn = liobn;
+
+    QLIST_INSERT_HEAD(&vfio_tce_tables, t, list);
+}
+
+static int put_tce_vfio(uint32_t liobn, target_ulong ioba, target_ulong tce)
+{
+    sPAPRVFIOTable *t;
+    struct tce_iommu_dma_map map = {
+        .argsz = sizeof(map),
+        .va = 0,
+        .dmaaddr = ioba,
+    };
+
+    QLIST_FOREACH(t, &vfio_tce_tables, list) {
+        if (t->liobn != liobn) {
+            continue;
+        }
+        if (tce) {
+            map.va = (uintptr_t)qemu_get_ram_ptr(tce & ~SPAPR_TCE_PAGE_MASK);
+            if (ioctl(t->fd, POWERPC_IOMMU_MAP_DMA, &map)) {
+                fprintf(stderr, "TCE_MAP_DMA: %d\n", errno);
+                return H_PARAMETER;
+            }
+        } else {
+            if (ioctl(t->fd, POWERPC_IOMMU_UNMAP_DMA, &map)) {
+                fprintf(stderr, "TCE_UNMAP_DMA: %d\n", errno);
+                return H_PARAMETER;
+            }
+        }
+        return H_SUCCESS;
+    }
+    return H_CONTINUE; /* positive non-zero value */
+}
+
 static target_ulong h_put_tce(CPUPPCState *env, sPAPREnvironment *spapr,
                               target_ulong opcode, target_ulong *args)
 {
@@ -203,6 +286,10 @@ static target_ulong h_put_tce(CPUPPCState *env, 
sPAPREnvironment *spapr,
     if (0 >= ret) {
         return ret ? H_PARAMETER : H_SUCCESS;
     }
+    ret = put_tce_vfio(liobn, ioba, tce);
+    if (0 >= ret) {
+        return ret ? H_PARAMETER : H_SUCCESS;
+    }
 #ifdef DEBUG_TCE
     fprintf(stderr, "%s on liobn=" TARGET_FMT_lx
             "  ioba 0x" TARGET_FMT_lx "  TCE 0x" TARGET_FMT_lx " ret=%d\n",
diff --git a/hw/spapr_pci.c b/hw/spapr_pci.c
index 5f89003..3375c3f 100644
--- a/hw/spapr_pci.c
+++ b/hw/spapr_pci.c
@@ -29,6 +29,7 @@
 #include "pci_host.h"
 #include "hw/spapr.h"
 #include "hw/spapr_pci.h"
+#include "hw/vfio_pci.h"
 #include "exec-memory.h"
 #include <libfdt.h>
 #include "trace.h"
@@ -440,6 +441,12 @@ static void pci_spapr_set_irq(void *opaque, int irq_num, 
int level)
                  level);
 }
 
+static int pci_spapr_get_irq(void *opaque, int irq_num)
+{
+    sPAPRPHBState *phb = opaque;
+    return phb->lsi_table[irq_num].dt_irq;
+}
+
 static uint64_t spapr_io_read(void *opaque, target_phys_addr_t addr,
                               unsigned size)
 {
@@ -567,7 +574,8 @@ static int spapr_phb_init(SysBusDevice *s)
 
     bus = pci_register_bus(&phb->host_state.busdev.qdev,
                            phb->busname ? phb->busname : phb->dtbusname,
-                           pci_spapr_set_irq, NULL, pci_spapr_map_irq, phb,
+                           pci_spapr_set_irq, pci_spapr_get_irq,
+                           pci_spapr_map_irq, phb,
                            &phb->memspace, &phb->iospace,
                            PCI_DEVFN(0, 0), PCI_NUM_PINS);
     phb->host_state.bus = bus;
@@ -596,6 +604,7 @@ static Property spapr_phb_properties[] = {
     DEFINE_PROP_HEX64("io_win_addr", sPAPRPHBState, io_win_addr, 0),
     DEFINE_PROP_HEX64("io_win_size", sPAPRPHBState, io_win_size, 0x10000),
     DEFINE_PROP_HEX64("msi_win_addr", sPAPRPHBState, msi_win_addr, 0),
+    DEFINE_PROP_UINT8("vfio", sPAPRPHBState, is_vfio, 0),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -639,6 +648,18 @@ void spapr_create_phb(sPAPREnvironment *spapr,
 /* Finalize PCI setup, called when all devices are already created */
 int spapr_finalize_pci_setup(sPAPRPHBState *phb)
 {
+    if (phb->is_vfio) {
+        int fd = vfio_get_container_fd(phb->host_state.bus);
+
+        if (fd < 0) {
+            return fd;
+        }
+        spapr_vfio_init_dma(fd, phb->dma_liobn,
+                            &phb->dma_window_start,
+                            &phb->dma_window_size);
+        return 0;
+    }
+
     phb->dma_window_start = 0;
     phb->dma_window_size = 0x40000000;
     phb->dma = spapr_tce_new_dma_context(phb->dma_liobn,
diff --git a/hw/spapr_pci.h b/hw/spapr_pci.h
index 3aae273..a4f031b 100644
--- a/hw/spapr_pci.h
+++ b/hw/spapr_pci.h
@@ -57,6 +57,8 @@ typedef struct sPAPRPHBState {
         int nvec;
     } msi_table[SPAPR_MSIX_MAX_DEVS];
 
+    uint8_t is_vfio;
+
     QLIST_ENTRY(sPAPRPHBState) list;
 } sPAPRPHBState;
 
diff --git a/hw/vfio_pci.c b/hw/vfio_pci.c
index 1ac287f..cc0b974 100644
--- a/hw/vfio_pci.c
+++ b/hw/vfio_pci.c
@@ -21,7 +21,6 @@
 #include <dirent.h>
 #include <stdio.h>
 #include <unistd.h>
-#include <sys/io.h>
 #include <sys/ioctl.h>
 #include <sys/mman.h>
 #include <sys/types.h>
@@ -44,6 +43,17 @@
 #include "vfio_pci.h"
 #include "linux-vfio.h"
 
+#ifndef TARGET_PPC64
+#include <sys/io.h>
+#define VFIO_IOMMU_EXTENSION    VFIO_X86_IOMMU
+#else
+#include "hw/pci_internals.h"
+#include "hw/xics.h"
+#include "hw/spapr.h"
+#define POWERPC_IOMMU           2
+#define VFIO_IOMMU_EXTENSION    POWERPC_IOMMU
+#endif
+
 //#define DEBUG_VFIO
 #ifdef DEBUG_VFIO
 #define DPRINTF(fmt, ...) \
@@ -235,6 +245,7 @@ struct vfio_irq_set_fd {
 
 static void vfio_enable_intx_kvm(VFIODevice *vdev)
 {
+#ifndef TARGET_PPC64
 #ifdef CONFIG_KVM
     struct vfio_irq_set_fd irq_set_fd = {
        .irq_set = {
@@ -298,10 +309,12 @@ fail:
     qemu_set_fd_handler(irqfd.fd, vfio_intx_interrupt, NULL, vdev);
     vfio_unmask_intx(vdev);
 #endif
+#endif
 }
 
 static void vfio_disable_intx_kvm(VFIODevice *vdev)
 {
+#ifndef TARGET_PPC64
 #ifdef CONFIG_KVM
     struct vfio_irq_set_fd irq_set_fd = {
        .irq_set = {
@@ -350,8 +363,10 @@ static void vfio_disable_intx_kvm(VFIODevice *vdev)
     DPRINTF("%s(%04x:%02x:%02x.%x) KVM INTx accel disabled\n", __FUNCTION__,
             vdev->host.seg, vdev->host.bus, vdev->host.dev, vdev->host.func);
 #endif
+#endif
 }
 
+#ifndef TARGET_PPC64
 static void vfio_update_irq(Notifier *notify, void *data)
 {
     VFIODevice *vdev = container_of(notify, VFIODevice, intx.update_irq);
@@ -381,6 +396,7 @@ static void vfio_update_irq(Notifier *notify, void *data)
     /* Re-enable the interrupt in cased we missed an EOI */
     vfio_eoi(&vdev->intx.eoi, NULL);
 }
+#endif
 
 static int vfio_enable_intx(VFIODevice *vdev)
 {
@@ -404,10 +420,14 @@ static int vfio_enable_intx(VFIODevice *vdev)
     vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */
     vdev->intx.irq = pci_get_irq(&vdev->pdev, vdev->intx.pin);
     vdev->intx.eoi.notify = vfio_eoi;
+#ifndef TARGET_PPC64
     ioapic_add_gsi_eoi_notifier(&vdev->intx.eoi, vdev->intx.irq);
 
     vdev->intx.update_irq.notify = vfio_update_irq;
     pci_add_irq_update_notifier(&vdev->pdev, &vdev->intx.update_irq);
+#else
+    xics_add_eoi_notifier(&vdev->intx.eoi, vdev->intx.irq);
+#endif
 
     if (event_notifier_init(&vdev->intx.interrupt, 0)) {
         error_report("vfio: Error: event_notifier_init failed\n");
@@ -440,8 +460,12 @@ static void vfio_disable_intx(VFIODevice *vdev)
     vfio_disable_intx_kvm(vdev);
     vfio_disable_irqindex(vdev, VFIO_PCI_INTX_IRQ_INDEX);
 
+#ifndef TARGET_PPC64
     pci_remove_irq_update_notifier(&vdev->intx.update_irq);
     ioapic_remove_gsi_eoi_notifier(&vdev->intx.eoi, vdev->intx.irq);
+#else
+    xics_remove_eoi_notifier(&vdev->intx.eoi);
+#endif
 
     fd = event_notifier_get_fd(&vdev->intx.interrupt);
     qemu_set_fd_handler(fd, NULL, NULL, vdev);
@@ -543,7 +567,7 @@ static int vfio_msix_vector_use(PCIDevice *pdev,
     }
 
     fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt);
-
+#ifndef TARGET_PPC64
     vdev->msi_vectors[vector].virq = kvm_irqchip_add_msi_route(kvm_state, msg);
     if (vdev->msi_vectors[vector].virq < 0 || 
         kvm_irqchip_add_irqfd(kvm_state, fd,
@@ -551,7 +575,11 @@ static int vfio_msix_vector_use(PCIDevice *pdev,
         qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL,
                             &vdev->msi_vectors[vector]);
     }
-
+#else
+    vdev->msi_vectors[vector].virq = -1;
+    qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL,
+                        &vdev->msi_vectors[vector]);
+#endif
     if (vdev->nr_vectors < vector + 1) {
         int i;
 
@@ -692,6 +720,7 @@ retry:
         fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt);
 
         msg = msi_get_msg(&vdev->pdev, i);
+#ifndef TARGET_PPC64
         vdev->msi_vectors[i].virq = kvm_irqchip_add_msi_route(kvm_state, msg);
         if (vdev->msi_vectors[i].virq < 0 || 
             kvm_irqchip_add_irqfd(kvm_state, fd,
@@ -699,6 +728,12 @@ retry:
             qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL,
                                 &vdev->msi_vectors[i]);
         }
+#else
+        vdev->msi_vectors[i].virq = -1;
+        qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL,
+                            &vdev->msi_vectors[i]);
+        msg = msg;
+#endif
     }
     
     ret = vfio_enable_vectors(vdev, false);
@@ -1581,6 +1616,25 @@ static int vfio_connect_container(VFIOGroup *group)
 
         memory_listener_register(&container->listener, get_system_memory());
 
+#define POWERPC_IOMMU           2
+    } else if (ioctl(fd, VFIO_CHECK_EXTENSION, POWERPC_IOMMU)) {
+        ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd);
+        if (ret) {
+            error_report("vfio: failed to set group container: %s\n",
+                         strerror(errno));
+            g_free(container);
+            close(fd);
+            return -1;
+        }
+
+        ret = ioctl(fd, VFIO_SET_IOMMU, POWERPC_IOMMU);
+        if (ret) {
+            error_report("vfio: failed to set iommu for container: %s\n",
+                         strerror(errno));
+            g_free(container);
+            close(fd);
+            return -1;
+        }
     } else {
         error_report("vfio: No available IOMMU models\n");
         g_free(container);
@@ -2005,3 +2059,19 @@ static void register_vfio_pci_dev_type(void)
 }
 
 type_init(register_vfio_pci_dev_type)
+
+int vfio_get_container_fd(struct PCIBus *pbus)
+{
+    BusChild *kid1st = QTAILQ_FIRST(&pbus->qbus.children);
+    VFIODevice *vdev1st;
+
+    if (!kid1st) {
+        printf("No device registered on PCI bus \"%s\", no DMA enabled\n",
+               pbus->qbus.name);
+        return -1;
+    }
+    vdev1st = container_of(kid1st->child, VFIODevice, pdev.qdev);
+
+    return vdev1st->group->container->fd;
+}
+
diff --git a/hw/vfio_pci.h b/hw/vfio_pci.h
index 226607c..0d13341 100644
--- a/hw/vfio_pci.h
+++ b/hw/vfio_pci.h
@@ -105,4 +105,6 @@ typedef struct VFIOGroup {
 #define VFIO_FLAG_IOMMU_SHARED_BIT 0
 #define VFIO_FLAG_IOMMU_SHARED (1U << VFIO_FLAG_UIOMMU_SHARED_BIT)
 
+int vfio_get_container_fd(struct PCIBus *pbus);
+
 #endif /* __VFIO_H__ */
-- 
1.7.10