[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCH 20/22] ppc: move load and store helpers, switch to
|
From: |
Alexander Graf |
|
Subject: |
Re: [Qemu-ppc] [PATCH 20/22] ppc: move load and store helpers, switch to AREG0 free mode |
|
Date: |
Mon, 30 Apr 2012 13:51:53 +0200 |
On 30.04.2012, at 12:45, Alexander Graf wrote:
>
> On 22.04.2012, at 15:26, Blue Swirl wrote:
>
>> Add an explicit CPUPPCState parameter instead of relying on AREG0
>> and rename op_helper.c (which only contains load and store helpers)
>> to mem_helper.c. Remove AREG0 swapping in
>> tlb_fill().
>>
>> Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
>> and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
>
> This patch breaks qemu-system-ppc64 on ppc32 host user space for me. I'm
> trying to debug it down, but worst case I'll omit this patch set for 1.1.
Ok, so apparently nobody ever tested TCG_AREG0 mode with the ppc tcg target. It
looks as if the 64-bit-guest-registers-in-32-bit-host-registers code path is
missing completely.
This actually makes me less confident that this is a change we want for 1.1.
I'll remove the patches from the queue.
Alex
TCG register swizzling code:
#ifdef CONFIG_TCG_PASS_AREG0
/* XXX/FIXME: suboptimal */
tcg_out_mov(s, TCG_TYPE_I32, tcg_target_call_iarg_regs[3],
tcg_target_call_iarg_regs[2]);
tcg_out_mov(s, TCG_TYPE_I64, tcg_target_call_iarg_regs[2],
tcg_target_call_iarg_regs[1]);
tcg_out_mov(s, TCG_TYPE_TL, tcg_target_call_iarg_regs[1],
tcg_target_call_iarg_regs[0]);
tcg_out_mov(s, TCG_TYPE_PTR, tcg_target_call_iarg_regs[0],
TCG_AREG0);
#endif
tcg_out_call (s, (tcg_target_long) qemu_st_helpers[opc], 1);
Log output:
NIP 00000000fff024e4 LR 0000000000000000 CTR 0000000000000000 XER
0000000000000000
MSR 0000000000000000 HID0 0000000060000000 HF 0000000000000000 idx 1
TB 00000000 01083771 DECR 4293883502
GPR00 0000000000000000 0000000000000000 0000000000000000 fffffffffff00000
GPR04 0000000000000000 00000000000024b0 0000000000000000 0000000000000000
GPR08 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000
CR 80000000 [ L - - - - - - - ] RES ffffffffffffffff
FPR00 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR04 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR08 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR12 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR16 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR20 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR24 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPR28 0000000000000000 0000000000000000 0000000000000000 0000000000000000
FPSCR 00000000
SRR0 0000000000000000 SRR1 0000000000000000 PVR 00000000003c0301 VRSAVE
0000000000000000
SPRG0 0000000000000000 SPRG1 0000000000000000 SPRG2 0000000000000000 SPRG3
0000000000000000
SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7
0000000000000000
SDR1 0000000000000000
IN:
0x00000000fff024e4: stw r6,0(r4)
OP:
---- 0xfff024e4
movi_i32 access_type,$0x20
mov_i32 tmp0,r4_0
movi_i32 tmp1,$0x0
qemu_st32 r6_0,tmp0,tmp1,$0x1
goto_tb $0x0
movi_i32 nip_0,$0xfff024e8
movi_i32 nip_1,$0x0
exit_tb $0xf4bae508
OUT: [size=180]
0xf5faf7a0: lwz r14,36(r27)
0xf5faf7a4: lwz r15,52(r27)
0xf5faf7a8: li r16,0
0xf5faf7ac: li r17,32
0xf5faf7b0: stw r17,672(r27)
0xf5faf7b4: rlwinm r3,r14,25,19,26
0xf5faf7b8: add r3,r3,r27
0xf5faf7bc: lwzu r4,8912(r3)
0xf5faf7c0: rlwinm r0,r14,0,30,19
0xf5faf7c4: cmpw cr7,r0,r4
0xf5faf7c8: lwz r4,4(r3)
0xf5faf7cc: cmpw cr6,r16,r4
0xf5faf7d0: crand 4*cr7+eq,4*cr6+eq,4*cr7+eq
0xf5faf7d4: beq- cr7,0xf5faf80c
0xf5faf7d8: mr r3,r16
0xf5faf7dc: mr r4,r14
0xf5faf7e0: mr r5,r15
0xf5faf7e4: li r6,1
0xf5faf7e8: mr r6,r5
0xf5faf7ec: mr r5,r4
0xf5faf7f0: mr r4,r3
0xf5faf7f4: mr r3,r27
0xf5faf7f8: lis r0,4123
0xf5faf7fc: ori r0,r0,27696
0xf5faf800: mtctr r0
0xf5faf804: bctrl
0xf5faf808: b 0xf5faf818
0xf5faf80c: lwz r3,16(r3)
0xf5faf810: add r3,r3,r14
0xf5faf814: stwx r15,0,r3
0xf5faf818: .long 0x0
0xf5faf81c: .long 0x0
0xf5faf820: .long 0x0
0xf5faf824: .long 0x0
0xf5faf828: lis r14,-16
0xf5faf82c: ori r14,r14,9448
0xf5faf830: stw r14,668(r27)
0xf5faf834: li r14,0
0xf5faf838: stw r14,664(r27)
0xf5faf83c: lis r3,-2886
0xf5faf840: ori r3,r3,58632
0xf5faf844: lis r0,4264
0xf5faf848: ori r0,r0,20192
0xf5faf84c: mtctr r0
0xf5faf850: bctr
Register state at bctr into helper_stl_mmu (0xf5faf804)
Breakpoint 1, helper_stl_mmu (env=0x10ab1cb0, addr=0, val=4294967295,
mmu_idx=279465600)
at /home/agraf/release/qemu/softmmu_template.h:266
266 index = (addr >> TARGET_PAGE_BITS) & (CPU_TLB_SIZE - 1);
(gdb) info registers
r0 0xf5faf808 4126865416
r1 0xf4bac950 4105881936
r2 0xf4bb4900 4105914624
r3 0x10ab1cb0 279649456
r4 0x0 0
r5 0x0 0
r6 0x0 0
r7 0xffffffff 4294967295
r8 0x10a84e80 279465600
r9 0xf4bae4b8 4105888952
r10 0x80 128
r11 0x10ab1cb0 279649456
r12 0xfff024e7 4293928167
r13 0x10450748 272959304
r14 0x0 0
r15 0x0 0
r16 0x0 0
r17 0x20 32
r18 0xfb7 4023
r19 0x10ad4eb8 279793336
r20 0xf5faf808 4126865416
r21 0xfbf7150 264204624
r22 0x3 3
r23 0x939 2361
r24 0x0 0
r25 0xf4bae4b8 4105888952
r26 0x0 0
r27 0x10ab1cb0 279649456
r28 0xf4bae4e8 4105889000
r29 0x0 0
r30 0xf4bae4b8 4105888952
r31 0x10a84e80 279465600
pc 0x101b6c4c 0x101b6c4c <helper_stl_mmu+28>
msr 0x2d032 184370
cr 0x28004440 671106112
lr 0xf5faf808 0xf5faf808
ctr 0x101b6c30 270232624
xer 0x0 0