[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [PATCH] PPC: Fail configure when libfdt is not available
From: |
Paolo Bonzini |
Subject: |
Re: [Qemu-ppc] [PATCH] PPC: Fail configure when libfdt is not available |
Date: |
Fri, 21 Oct 2011 09:34:22 +0200 |
On 10/20/2011 08:35 PM, Gerd Hoffmann wrote:
> Hi,
>
>> If there are build problems with libfdt on any platform let me know
>> about them. I would like it to build clean as widely as possible, but
>> I don't have that great a diversity of build environments, so I have
>> to reply on bug reports.
>
> Fails to build on RHEL-5:
>
> CC convert-dtsv0-lexer.lex.o
> cc1: warnings being treated as errors
> convert-dtsv0-lexer.lex.c:693: warning: no previous prototype for 'yylex'
> make: *** [convert-dtsv0-lexer.lex.o] Error 1
>
> Removing -Werror from the Makefile gets me a bit further:
>
> CC dtc-lexer.lex.o
> dtc-lexer.lex.c:683: warning: no previous prototype for 'yylex'
> dtc-lexer.l: In function 'push_input_file':
> dtc-lexer.l:192: warning: implicit declaration of function
> 'yypush_buffer_state'
> dtc-lexer.l:192: warning: nested extern declaration of 'yypush_buffer_state'
> dtc-lexer.l: In function 'pop_input_file':
> dtc-lexer.l:201: warning: implicit declaration of function
> 'yypop_buffer_state'
> dtc-lexer.l:201: warning: nested extern declaration of 'yypop_buffer_state'
> CC dtc-parser.tab.o
> LD dtc
> dtc-lexer.lex.o: In function `push_input_file':
> /home/buildbot/git/dtc/dtc-lexer.l:192: undefined reference to
> `yypush_buffer_state'
> dtc-lexer.lex.o: In function `pop_input_file':
> /home/buildbot/git/dtc/dtc-lexer.l:201: undefined reference to
> `yypop_buffer_state'
> collect2: ld returned 1 exit status
> make: *** [dtc] Error 1
>
> I guess the flex version shipped with RHEL-5 is too old.
>
> $ rpm -qf $(which lex)
> flex-2.5.4a-41.fc6
flex is only used by dtc, not libfdt, so you can probably patch it out.
However, the usual convention is that lex- and yacc-generated files
are shipped in the tarball, with a "make dist" that wraps tar and/or
git-archive. See the following patch.
Paolo
------------------ 8< -------------------------
>From f91c3f5f165df8c8331c0c33374f55f5cf157ba6 Mon Sep 17 00:00:00 2001
From: Paolo Bonzini <address@hidden>
Date: Fri, 21 Oct 2011 08:59:43 +0200
Subject: [PATCH] build: add make dist
The usual convention is that lex- and yacc-generated files are shipped in
the tarball. Another usual convention, originating in Automake, is that
"make dist" wraps tar and/or git-archive and generates a self-contained
archive. dtc does not use Automake, so add this target.
Cc: Gerd Hoffmann <address@hidden>
Cc: David Gibson <address@hidden>
Signed-off-by: Paolo Bonzini <address@hidden>
---
Makefile | 23 +++++++++++++++++++++++
Makefile.dtc | 4 ++--
2 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index b32409b..edfdb9c 100644
--- a/Makefile
+++ b/Makefile
@@ -246,4 +246,27 @@ $(LIBFDT_lib):
@$(VECHO) BISON $@
$(BISON) -d $<
+.PHONY: distdir dist-gz dist-xz dist
+
+distdir = dtc-$(dtc_version)/
+distdir: $(DTC_GEN_SRCS) $(CONVERT_GEN_SRCS)
+ mkdir $(distdir)
+ @$(VECHO) DISTDIR $@
+ git archive --format=tar HEAD --prefix=$(distdir) | tar -xf -
+ @for i in $^; do \
+ $(if $(V),echo cp $$i $(distdir),:); \
+ cp $$i $(distdir); \
+ done
+ chmod -R ug+w $(distdir)
+
+dist-gz: distdir
+ @$(VECHO) TAR dtc-$(dtc_version).tar.gz
+ tar -chozf dtc-$(dtc_version).tar.gz $(distdir)
+dist-xz: distdir
+ @$(VECHO) TAR dtc-$(dtc_version).tar.xz
+ tar -Ixz -chof dtc-$(dtc_version).tar.xz $(distdir)
+
+dist: dist-gz dist-xz
+ rm -rf $(distdir)
+
FORCE:
diff --git a/Makefile.dtc b/Makefile.dtc
index bece49b..0b2c869 100644
--- a/Makefile.dtc
+++ b/Makefile.dtc
@@ -14,5 +14,5 @@ DTC_SRCS = \
treesource.c \
util.c
-DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
-DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
+DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c dtc-parser.tab.h
+DTC_OBJS = $(patsubst %.c,%.o,$(DTC_SRCS) $(filter %.c, $(DTC_GEN_SRCS)))
--
1.7.6
Re: [Qemu-ppc] [Qemu-devel] [PATCH] PPC: Fail configure when libfdt is not available, Peter Maydell, 2011/10/18