qemu-discuss
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Common vlan with no host privileges


From: Narcis Garcia
Subject: Re: Common vlan with no host privileges
Date: Thu, 24 Oct 2024 11:14:59 +0200

+ Is there some way to route a TCP port, inverse way to SLIRP hostfwd:

When guest communicates to tcp/10.0.2.2:139 , to traffic be forwarded to different host port or to another VM.


El 24/10/24 a les 8:31, Narcis Garcia ha escrit:
+ Is there some way to just make guests have their simple SLIRP scenario and each one sees a single NIC with dynamically acquired 10.0.2.15 and 10.0.2.16 IP addresses in same unified guests network?


El 23/10/24 a les 21:03, Narcis Garcia ha escrit:
In a Debian 12 host (Qemu 7.2.13), not using superuser privileges,
I launch VM1:
$ qemu-system-x86_64 -name "Windows XP" (...)
     -device rtl8139,netdev=net0
     -netdev user,id=net0,smb=/home/_all/public
     -netdev socket,id=vlan-winxp,mcast=230.0.0.1:1234
     -device rtl8139,netdev=vlan-winxp
and VM2:
$ qemu-system-x86_64 -name debian10
     -device rtl8139,netdev=net0
     -netdev user,id=net0,smb=/home/_all/public
     -netdev socket,id=vlan-winxp,mcast=230.0.0.1:1234
     -device virtio-net-pci,netdev=vlan-winxp

Then in guest VM1 first (default) NIC acquires address 10.0.2.15/24 and I configure manually second NIC to have address 192.168.139.1/24 In guest VM2 first (default) NIC also acquires address 10.0.2.15/24 and I configure manually second NIC to have address 192.168.139.139/24

 From VM1 I ping to 192.168.139.139 with result "Timeout"
 From VM2 I ping to 192.168.139.1 with result "Destination Host Unreachable"

My goal is to make a Windows XP (VM1) access old Samba in Debian 10 (VM2), and VM2 accesses to host smb/qemu resource. Both guests should reach WAN/Internet through user net (virtual gateway 10.0.2.2)

My questions:
1. What do I need to add to command line so communications between guests works? 2. Is there some documentation about fd= and localaddr= parameters I found on web comments? What are they intended for?

Thank you.



--
Narcis Garcia



reply via email to

[Prev in Thread] Current Thread [Next in Thread]