Re: Error : init: partition(s) not found in /sys, waiting for their ueve

On Tue, Sep 3, 2024 at 8:14 PM Mario Marietto <marietto2008@gmail.com> wrote:

>Depends which version of Android you use, but images are getting bigger and bigger every time since Android 5, so I'm not surprised it >takes more and more time to boot.

If I will be able to boot Android 10 using the qemu patched by Antmicro,maybe I will try if it will work with Android 14 for Raspberry Pi 4.
Just for the sake of my curiosity.

On Tue, Sep 3, 2024 at 8:03 PM Pierrick Bouvier <pierrick.bouvier@linaro.org> wrote:
On 9/3/24 10:17, Mario Marietto wrote:
> @Pierrick Bouvier :
>
> ---> I'm really glad to see it worked! Are you already running the
> raspberry image, or vanilla AOSP ?
>
> No and I don't think I will. I have a project that I'm working on that
> aims to emulate Android for Arm on Linux x64 bit. I knew that it would
> be slow,but I didn't think it would be so much. When I used AVD as an
> emulator,Android went faster.
>
>

Depends which version of Android you use, but images are getting bigger
and bigger everytime since Android 5, so I'm not surprised it takes more
and more time to boot.

By AVD, if you refer to Android emulator included in Android Studio,
it's a downstream fork of QEMU. So the performance will be on par (or
worse) than upstream QEMU.

The only way to have something that goes fast is to have aarch64
hardware and use kvm acceleration (on Linux, or equivalent on
Windows/MacOS).

> @Peter Maydell <mailto:peter.maydell@linaro.org> :
>
>
> I think that I've understood the reason why several years ago it worked.
> Probably I'd used this special version of qemu :
>
>
> https://github.com/antmicro/kvm-aosp-qemu/releases/tag/5.0.0-kvm-aosp
> <https://github.com/antmicro/kvm-aosp-qemu/releases/tag/5.0.0-kvm-aosp>
>
> I'm sure that it contains the necessary patches to be able to boot
> Android 10 on the Jetson Nano.
>
> On Tue, Sep 3, 2024 at 6:31 PM Pierrick Bouvier
> <pierrick.bouvier@linaro.org <mailto:pierrick.bouvier@linaro.org>> wrote:
>
> Without answering specifically on your question, if you want to
> exchange
> files with a android guest, simply use adb (push/pull commands). It's
> much better and faster than any other solution you can try, and
> cuttlefish tools already setup all the adb stuff for you.
>
> You can use adb-sync (https://github.com/jb2170/better-adb-sync
> <https://github.com/jb2170/better-adb-sync>) to have
> something similar to rsync, in case you want to send files
> incrementally.
>
> Pierrick
>
> On 9/3/24 08:24, Mario Marietto wrote:
> > Hello.
> >
> > Actually I'm using my Jetson Nano and I'm trying to emulate
> Android 10
> > by antmicro. I'm trying to use the same parameters used several
> years
> > ago,when it worked. What I want to try now is to enable
> virtio-blk-pci
> > on qemu. Probably in addition to using qemu 5.0,I had configured
> qemu
> > with virtio-blk-pci enabled,because I used these parameters and they
> > worked great :
> >
> > -drive
> >
> index=0,if=none,id=system,file=/home/aresuser/Desktop/antmicro/aosp-img/system-rw.img \
> > -device virtio-blk-pci,drive=system \
> > -drive
> >
> index=1,if=none,id=vendor,file=/home/aresuser/Desktop/antmicro/aosp-img/vendor-rw.img \
> > -device virtio-blk-pci,drive=vendor \
> > -drive
> >
> index=2,if=none,id=userdata,file=/home/aresuser/Desktop/antmicro/aosp-img/userdata.img \
> > -device virtio-blk-pci,drive=userdata \
> >
> > Can someone tell me how to enable the "VirtFS support" in qemu 5.0 ?
> > because at the moment it is configured to "no" :
> >
> > root@jetson:/home/aresuser/Desktop/antmicro/qemu-5.0.0# ./configure
> > Install prefix /usr/local
> > BIOS directory /usr/local/share/qemu
> > firmware path /usr/local/share/qemu-firmware
> > binary directory /usr/local/bin
> > library directory /usr/local/lib
> > module directory /usr/local/lib/qemu
> > libexec directory /usr/local/libexec
> > include directory /usr/local/include
> > config directory /usr/local/etc
> > local state directory /usr/local/var
> > Manual directory /usr/local/share/man
> > ELF interp prefix /usr/gnemul/qemu-%M
> > Build directory /home/aresuser/Desktop/antmicro/qemu-5.0.0
> > Source path /home/aresuser/Desktop/antmicro/qemu-5.0.0
> > GIT binary git
> > GIT submodules
> > C compiler cc
> > Host C compiler cc
> > C++ compiler c++
> > Objective-C compiler clang
> > ARFLAGS rv
> > CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -g
> > QEMU_CFLAGS -I/usr/include/pixman-1 -I$(SRC_PATH)/dtc/libfdt
> > -pthread -I/usr/include/glib-2.0
> > -I/usr/lib/aarch64-linux-gnu/glib-2.0/include -fPIE -DPIE
> -D_GNU_SOURCE
> > -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes
> > -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes
> > -fno-strict-aliasing -fno-common -fwrapv -std=gnu99
> > -Wexpansion-to-defined -Wendif-labels -Wno-shift-negative-value
> > -Wno-missing-include-dirs -Wempty-body -Wnested-externs
> > -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers
> > -Wold-style-declaration -Wold-style-definition -Wtype-limits
> > -fstack-protector-strong -I/usr/include/libpng16
> > -I$(SRC_PATH)/capstone/include
> > QEMU_LDFLAGS -L$(BUILD_DIR)/dtc/libfdt -Wl,-z,relro
> -Wl,-z,now -pie
> > -fstack-protector-strong
> > make make
> > install install
> > python /usr/bin/python3 -B (3.10.12)
> > genisoimage /usr/bin/genisoimage
> > slirp support internal
> > smbd /usr/sbin/smbd
> > module support no
> > alt path mod load no
> > host CPU aarch64
> > host big endian no
> > target list aarch64-softmmu alpha-softmmu arm-softmmu
> cris-softmmu
> > hppa-softmmu i386-softmmu lm32-softmmu m68k-softmmu
> microblaze-softmmu
> > microblazeel-softmmu mips-softmmu mips64-softmmu mips64el-softmmu
> > mipsel-softmmu moxie-softmmu nios2-softmmu or1k-softmmu ppc-softmmu
> > ppc64-softmmu riscv32-softmmu riscv64-softmmu rx-softmmu
> s390x-softmmu
> > sh4-softmmu sh4eb-softmmu sparc-softmmu sparc64-softmmu
> tricore-softmmu
> > unicore32-softmmu x86_64-softmmu xtensa-softmmu xtensaeb-softmmu
> > aarch64-linux-user aarch64_be-linux-user alpha-linux-user
> arm-linux-user
> > armeb-linux-user cris-linux-user hppa-linux-user i386-linux-user
> > m68k-linux-user microblaze-linux-user microblazeel-linux-user
> > mips-linux-user mips64-linux-user mips64el-linux-user
> mipsel-linux-user
> > mipsn32-linux-user mipsn32el-linux-user nios2-linux-user
> or1k-linux-user
> > ppc-linux-user ppc64-linux-user ppc64abi32-linux-user
> ppc64le-linux-user
> > riscv32-linux-user riscv64-linux-user s390x-linux-user
> sh4-linux-user
> > sh4eb-linux-user sparc-linux-user sparc32plus-linux-user
> > sparc64-linux-user tilegx-linux-user x86_64-linux-user
> xtensa-linux-user
> > xtensaeb-linux-user
> > gprof enabled no
> > sparse enabled no
> > strip binaries yes
> > profiler no
> > static build no
> > SDL support yes (2.26.1)
> > SDL image support no
> > GTK support yes (3.24.33)
> > GTK GL support yes
> > VTE support no
> > TLS priority NORMAL
> > GNUTLS support no
> > libgcrypt no
> > nettle no
> > libtasn1 no
> > PAM no
> > iconv support yes
> > curses support yes
> > virgl support no
> > curl support no
> > mingw32 support no
> > Audio drivers pa oss
> > Block whitelist (rw)
> > Block whitelist (ro)
> >
> > *VirtFS support no*
> >
> > Multipath support no
> > VNC support yes
> > VNC SASL support no
> > VNC JPEG support yes
> > VNC PNG support yes
> > xen support no
> > brlapi support no
> > Documentation no
> > PIE yes
> > vde support no
> > netmap support no
> > Linux AIO support no
> > Linux io_uring support no
> > ATTR/XATTR support yes
> > Install blobs yes
> > KVM support yes
> > HAX support no
> > HVF support no
> > WHPX support no
> > TCG support yes
> > TCG debug enabled no
> > TCG interpreter no
> > malloc trim support yes
> > RDMA support no
> > PVRDMA support no
> > fdt support git
> > membarrier no
> > preadv support yes
> > fdatasync yes
> > madvise yes
> > posix_madvise yes
> > posix_memalign yes
> > libcap-ng support no
> > vhost-net support yes
> > vhost-crypto support yes
> > vhost-scsi support yes
> > vhost-vsock support yes
> > vhost-user support yes
> > vhost-user-fs support yes
> > Trace backends log
> > spice support no
> > rbd support no
> > xfsctl support no
> > smartcard support no
> > libusb no
> > usb net redir no
> > OpenGL support yes
> > OpenGL dmabufs yes
> > libiscsi support no
> > libnfs support no
> > build guest agent yes
> > QGA VSS support no
> > QGA w32 disk info no
> > QGA MSI support no
> > seccomp support no
> > coroutine backend ucontext
> > coroutine pool yes
> > debug stack usage no
> > mutex debugging no
> > crypto afalg no
> > GlusterFS support no
> > gcov gcov
> > gcov enabled no
> > TPM support yes
> > libssh support no
> > QOM debugging yes
> > Live block migration yes
> > lzo support no
> > snappy support no
> > bzip2 support no
> > lzfse support no
> > zstd support no
> > NUMA host support yes
> > libxml2 yes
> > tcmalloc support no
> > jemalloc support no
> > avx2 optimization
> > avx512f optimization no
> > replication support yes
> > VxHS block device no
> > bochs support yes
> > cloop support yes
> > dmg support yes
> > qcow v1 support yes
> > vdi support yes
> > vvfat support yes
> > qed support yes
> > parallels support yes
> > sheepdog support yes
> > capstone internal
> > libpmem support no
> > libudev yes
> > default devices yes
> > plugin support no
> > fuzzing support no
> > gdb /usr/bin/gdb
> > cross containers docker
> >
> > Thanks.
> >
> > On Tue, Sep 3, 2024 at 10:55 AM Mario Marietto
> <marietto2008@gmail.com <mailto:marietto2008@gmail.com>
> > <mailto:marietto2008@gmail.com <mailto:marietto2008@gmail.com>>>
> wrote:
> >
> > Finally it worked :
> >
> > Istantanea_2024-09-03_10-51-35.jpg
> > Very thanks man. In any case it is VERY slow and not usable
> at all.
> > Is there something that I can do to improve its speed ?
> >
> >
> > On Tue, Sep 3, 2024 at 10:33 AM Mario Marietto
> > <marietto2008@gmail.com <mailto:marietto2008@gmail.com>
> <mailto:marietto2008@gmail.com <mailto:marietto2008@gmail.com>>> wrote:
> >
> >
> ziomario@Z390-AORUS-PRO-DEST:/mnt/zroot-133/_OS/Android/aosp_14/android-image$ HOME=$(pwd) ./bin/launch_cvd -vm_manager qemu_cli -report_anonymous_usage_stats=n --start_webrtc=false
> >
> > 09-03 10:04:44.206 2786386 2786386 I launch_cvd: main.cc:235
> > Using system_image_dir of:
> >
> ===================================================================
> > NOTICE:
> >
> > By using this Android Virtual Device, you agree to
> > Google Terms of Service
> (https://policies.google.com/terms <https://policies.google.com/terms>
> > <https://policies.google.com/terms
> <https://policies.google.com/terms>>).
> > The Google Privacy Policy
> (https://policies.google.com/privacy
> <https://policies.google.com/privacy>
> > <https://policies.google.com/privacy
> <https://policies.google.com/privacy>>)
> > describes how Google handles information generated as you use
> > Google Services.
> >
> ===================================================================
> >
> > Reading --config option from:
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/android-info.txt
> > Launching CVD using --config='phone'.
> > GPU auto mode: detected prerequisites for accelerated
> rendering
> > support.
> > Enabling --gpu_mode=gfxstream.
> > GPU vhost user auto mode: not yet supported with
> qemu_cli. Not
> > enabling vhost user gpu.
> > Requested resuming a previous session (the default
> behavior) but
> > the base images have changed under the overlay, making the
> > overlay incompatible. Wiping the overlay files.
> > Path for instance UDS: /tmp/cf_avd_1000
> >
> > The following lines contain useful debugging information:
> > Serial console is disabled; use -console=true to enable it.
> > Logcat output:
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instances/cvd-1/logs/logcat
> >
> > Kernel log:
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instances/cvd-1/kernel.log
> > Launcher log:
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instances/cvd-1/logs/launcher.log
> >
> > Instance configuration:
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instances/cvd-1/cuttlefish_config.json
> >
> > Launcher Build ID: 12309296
> >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/modem_simulator
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/tombstone_receiver
> > /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/log_tee
> > /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/wmediumd
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/casimir_control_server
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/screen_recording_server
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/adb_connector
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/socket_vsock_proxy
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/socket_vsock_proxy
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/tcp_connector
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/control_env_proxy_server
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/echo_server
> > Start modem simulator, server_fds: 58, Sim type: normal
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/gnss_grpc_proxy
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/logcat_receiver
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/kernel_log_monitor
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/openwrt_control_server
> > /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/log_tee
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/process_restarter
> > /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/netsimd
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/socket_vsock_proxy
> >
> > Failed to open socket: Connection refused
> >
> >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/socket_vsock_proxy
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/secure_env
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/x86_64-linux-gnu/qemu/qemu-system-aarch64
> > Server listening on
> >
> unix:/tmp/cf_avd_1000/cvd-1/grpc_socket/CasimirControlServer.sock
> > Server listening on
> > unix:/tmp/cf_avd_1000/cvd-1/grpc_socket/EchoServer.sock
> > Server listening on
> >
> unix:/tmp/cf_avd_1000/cvd-1/grpc_socket/OpenwrtControlServer.sock
> > root-canal I 09-03 10:06:13.219 device_boutique.cc:37
> > Registering beacon
> > root-canal I 09-03 10:06:13.219 device_boutique.cc:37
> > Registering beacon_swarm
> > root-canal I 09-03 10:06:13.219 device_boutique.cc:37
> > Registering scripted_beacon
> > root-canal I 09-03 10:06:13.219 device_boutique.cc:37
> > Registering sniffer
> > Server listening on
> >
> unix:/tmp/cf_avd_1000/cvd-1/grpc_socket/ControlEnvProxyServer.sock
> > netsimd I 09-03 08:06:13.221 rust_main.rs:98
> <http://rust_main.rs:98>
> > <http://rust_main.rs:98 <http://rust_main.rs:98>> -
> netsim artifacts path:
> > "/tmp/android-ziomario/netsimd"
> > netsimd I 09-03 08:06:13.221 rust_main.rs:101
> <http://rust_main.rs:101>
> > <http://rust_main.rs:101 <http://rust_main.rs:101>> -
> NetsimdArgs {
> >    fd_startup_str: Some(
> >        "{\"devices\":[{\"name\":\"0.0.0.0:6520
> <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520
> <http://0.0.0.0:6520>>\",\"chips\":[{\"kind\":\"BLUETOOTH\",\"fdIn\":81,\"fdOut\":82},{\"kind\":\"UWB\",\"fdIn
> > \":83,\"fdOut\":84}]}]}",
> >    ),
> >    no_cli_ui: false,
> >    no_web_ui: false,
> >    pcap: false,
> >    disable_address_reuse: false,
> >    hci_port: Some(
> >        7300,
> >    ),
> >    connector_instance: None,
> >    instance: Some(
> >        1,
> >    ),
> >    logtostderr: false,
> >    dev: false,
> >    rust_grpc: false,
> >    rust_hostapd: false,
> >    rust_slirp: true,
> >    vsock: None,
> >    config: None,
> >    host_dns: None,
> >    http_proxy: None,
> >    wifi_tap: None,
> >    test_beacons: false,
> >    no_test_beacons: false,
> >    no_shutdown: false,
> >    verbose: false,
> >    version: false,
> > }
> > Size of OBJECT = 1204
> > Size of components in TPMT_SENSITIVE = 744
> >    TPMI_ALG_PUBLIC                 2
> >    TPM2B_AUTH                      50
> >    TPM2B_DIGEST                    50
> >    TPMU_SENSITIVE_COMPOSITE        642
> > MAX_CONTEXT_SIZE can be reduced to 1264 (1344)
> > size : 360
> > starting Rust KeyMint TA implementation in a thread
> > starting C++ KeyMint implementation in a thread with FDs
> in=31,
> > out=30
> > KeyMint Rust TA running with infile=37, outfile=36,
> > security_level=Software
> > No secure deletion data file found. Creating one.
> > I0903 10:06:13.249418 2786724 SharedLibrary.cpp:64]
> > SharedLibrary::open for [libvulkan.so]
> >
> > I0903 10:06:13.249507 2786724 SharedLibrary.cpp:76]
> > SharedLibrary::open for [libvulkan.so]: not found in map,
> open
> > for the first time
> >
> > I0903 10:06:13.249511 2786724 SharedLibrary.cpp:186]
> > SharedLibrary::open for [libvulkan.so] (posix): begin
> >
> > I0903 10:06:13.249514 2786724 SharedLibrary.cpp:244]
> > SharedLibrary::open for [libvulkan.so] (posix,linux): call
> > dlopen on [libvulkan.so
> > ]
> >
> > added library libvulkan.so
> > I0903 10:06:13.250535 2786724 HealthMonitor.cpp:280]
> > HealthMonitor disabled.
> > createGlobalVkEmulation:964 Selecting Vulkan device: NVIDIA
> > GeForce GTX 1060 3GB
> > initialize: Supports id properties, got a vulkan device UUID
> > I0903 10:06:13.354756 2786724 SharedLibrary.cpp:76]
> > SharedLibrary::open for [libGLESv2.so]: not found in map,
> open
> > for the first time
> >
> > I0903 10:06:13.354764 2786724 SharedLibrary.cpp:186]
> > SharedLibrary::open for [libGLESv2.so] (posix): begin
> >
> > I0903 10:06:13.354768 2786724 SharedLibrary.cpp:244]
> > SharedLibrary::open for [libGLESv2.so] (posix,linux): call
> > dlopen on [libGLESv2.so
> > ]
> >
> > I0903 10:06:13.355076 2786724 SharedLibrary.cpp:76]
> > SharedLibrary::open for [libEGL.so]: not found in map,
> open for
> > the first time
> >
> > I0903 10:06:13.355081 2786724 SharedLibrary.cpp:186]
> > SharedLibrary::open for [libEGL.so] (posix): begin
> >
> > I0903 10:06:13.355084 2786724 SharedLibrary.cpp:244]
> > SharedLibrary::open for [libEGL.so] (posix,linux): call
> dlopen
> > on [libEGL.so]
> >
> > I0903 10:06:13.448821 2786724 VkCommonOperations.cpp:1226]
> > Initializing VkEmulation features:
> > I0903 10:06:13.448837 2786724 VkCommonOperations.cpp:1227]
> >     glInteropSupported: true
> > I0903 10:06:13.448840 2786724 VkCommonOperations.cpp:1228]
> >     useDeferredCommands: true
> > I0903 10:06:13.448842 2786724 VkCommonOperations.cpp:1230]
> >     createResourceWithRequirements: true
> > I0903 10:06:13.448844 2786724 VkCommonOperations.cpp:1231]
> >     useVulkanComposition: false
> > I0903 10:06:13.448846 2786724 VkCommonOperations.cpp:1232]
> >     useVulkanNativeSwapchain: false
> > I0903 10:06:13.448848 2786724 VkCommonOperations.cpp:1233]
> >     enable guestRenderDoc: false
> > I0903 10:06:13.448850 2786724 VkCommonOperations.cpp:1234]
> >     ASTC LDR emulation mode: 2
> > I0903 10:06:13.448852 2786724 VkCommonOperations.cpp:1235]
> >     enable ETC2 emulation: true
> > I0903 10:06:13.448854 2786724 VkCommonOperations.cpp:1236]
> >     enable Ycbcr emulation: false
> > I0903 10:06:13.448856 2786724 VkCommonOperations.cpp:1237]
> >     guestUsesAngle: false
> > I0903 10:06:13.448858 2786724 VkCommonOperations.cpp:1238]
> >     useDedicatedAllocations: false
> > I0903 10:06:13.449542 2786724 FrameBuffer.cpp:486] Graphics
> > Adapter Vendor Google (NVIDIA Corporation)
> > I0903 10:06:13.449548 2786724 FrameBuffer.cpp:487] Graphics
> > Adapter Android Emulator OpenGL ES Translator (NVIDIA GeForce
> > GTX 1060 3GB/
> > PCIe/SSE2)
> > I0903 10:06:13.449551 2786724 FrameBuffer.cpp:488]
> Graphics API
> > Version OpenGL ES 3.0 (OpenGL ES 3.2 NVIDIA 535.183.01)
> > I0903 10:06:13.449553 2786724 FrameBuffer.cpp:489]
> Graphics API
> > Extensions GL_OES_EGL_sync GL_OES_EGL_image
> > GL_OES_EGL_image_external G
> > L_OES_depth24 GL_OES_depth32 GL_OES_element_index_uint
> > GL_OES_texture_float GL_OES_texture_float_linear
> > GL_OES_compressed_paletted_text
> > ure GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture
> > GL_OES_texture_half_float GL_OES_texture_half_float_linear
> > GL_OES_packed_d
> > epth_stencil GL_OES_vertex_half_float
> > GL_OES_standard_derivatives GL_OES_texture_npot
> > GL_OES_rgb8_rgba8 GL_OVR_multiview2 GL_EXT_multiv
> > iew_texture_multisample GL_EXT_color_buffer_float
> > GL_EXT_color_buffer_half_float GL_EXT_texture_format_BGRA8888
> > GL_APPLE_texture_format
> > _BGRA8888 GL_EXT_texture_buffer GL_OES_texture_buffer
> > GL_EXT_draw_buffers_indexed
> > I0903 10:06:13.449559 2786724 FrameBuffer.cpp:490] Graphics
> > Device Extensions N/A
> > GUEST_UBOOT_VERSION: 2024.01-g1ed8f8bde33e-ab12091206 (Jul 10
> > 2024 - 23:47:38 +0000)
> > U-Boot 20
> > starting Rust KeyMint TA implementation in a thread
> > starting C++ KeyMint implementation in a thread with FDs
> in=31,
> > out=30
> > KeyMint Rust TA running with infile=37, outfile=36,
> > security_level=Software
> > Secure deletion data file found. Parsing.
> > 2024-09-03T08:06:13.626075Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 16 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.626410Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 17 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.626599Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 18 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.626788Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 19 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.626980Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 20 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.627171Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 21 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.627360Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 22 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.627549Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 23 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.627738Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 24 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.627930Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 25 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.628119Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 26 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.628307Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 27 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.628496Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 28 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.628683Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 29 for device
> virtio-serial.0
> > 2024-09-03T08:06:13.628874Z qemu-system-aarch64:
> > virtio-serial-bus: Unexpected port id 30 for device
> virtio-serial.0
> >
> > GUEST_KERNEL_VERSION:
> > 6.6.46-android15-8-g3569b053517c-ab12290856-4k
> > (kleaf@build-host) (Android (11368308, +pgo, +bolt, +lto,
> +mlgo,
> > based on r510928) clang version 18.0.0
> > (https://android.googlesource.com/toolchain/llvm-project
> <https://android.googlesource.com/toolchain/llvm-project>
> > <https://android.googlesource.com/toolchain/llvm-project
> <https://android.googlesource.com/toolchain/llvm-project>>
> > 477610d4d0d988e69dbc3fae4fe86bff3f07f2b5), LLD 18.0.0) #1 SMP
> > PREEMPT Wed Aug 28 21:43:33 UTC 2024
> > ] Linux version
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > GUEST_BUILD_FINGERPRINT:
> >
> generic/aosp_cf_arm64_only_phone/vsoc_arm64_only:VanillaIceCream/MAIN.1c019b0c/12309296:userdebug/test-keys
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > init: starting service 'adbd'...
> > proxy_fastboot] Stop event (11) received. Stopping proxy
> > proxy_adb] Start event (5) received. Starting proxy
> > proxy_adb] From: tcp: 6520
> > proxy_adb] To: vsock: 3:5555 vhost_user: false
> > transport message failed, response body: device
> '0.0.0.0:6520 <http://0.0.0.0:6520>
> > <http://0.0.0.0:6520 <http://0.0.0.0:6520>>' not found
> > I0903 10:09:30.816108 2787314 IntelDrmDecoder.cpp:38]
> > IntelDrmDecoder created for context 2
> > I0903 10:09:32.764820 2787316 IntelDrmDecoder.cpp:38]
> > IntelDrmDecoder created for context 7
> > VIRTUAL_DEVICE_DISPLAY_POWER_MODE_CHANGED
> > VIRTUAL_DEVICE_DISPLAY_POWER_MODE_CHANGED
> > I0903 10:10:20.918014 2787359 IntelDrmDecoder.cpp:38]
> > IntelDrmDecoder created for context 11
> >
> > I see a lot of errors,but it seems connected :
> >
> > ziomario@Z390-AORUS-PRO-DEST:~/Scrivania$ adb devices
> > List of devices attached
> > 0.0.0.0:6520 <http://0.0.0.0:6520> <http://0.0.0.0:6520
> <http://0.0.0.0:6520>>    device
> >
> > but scrcpy didn't work :
> >
> > ziomario@Z390-AORUS-PRO-DEST:~/Scrivania$ scrcpy
> >
> > scrcpy 2.6.1 <https://github.com/Genymobile/scrcpy
> <https://github.com/Genymobile/scrcpy>
> > <https://github.com/Genymobile/scrcpy
> <https://github.com/Genymobile/scrcpy>>>
> > INFO: ADB device found:
> > INFO:     --> (tcpip) 0.0.0.0:6520 <http://0.0.0.0:6520>
> <http://0.0.0.0:6520 <http://0.0.0.0:6520>>
> >                    device
> Cuttlefish_arm64_phone_64_bit_only
> >
> > /usr/local/share/scrcpy/scrcpy-server: 1 file pushed, 0
> skipped.
> > 90.0 MB/s (71112 bytes in 0.001s)
> > [server] INFO: Device: [Google] generic Cuttlefish arm64
> phone
> > 64-bit only (Android 14)
> > [server] ERROR: Could not register rotation watcher
> > java.lang.NullPointerException: Attempt to invoke virtual
> method
> > 'java.lang.Class java.lang.Object.getClass()' on a null
> object
> > reference
> >
> >        at
> >
> com.genymobile.scrcpy.wrappers.WindowManager.registerRotationWatcher(WindowManager.java:185)
> >        at
> > com.genymobile.scrcpy.device.Device.<init>(Device.java:93)
> >        at
> com.genymobile.scrcpy.Server.scrcpy(Server.java:145)
> >        at
> > com.genymobile.scrcpy.Server.internalMain(Server.java:290)
> >        at com.genymobile.scrcpy.Server.main(Server.java:245)
> >        at
> >
> com.android.internal.os.RuntimeInit.nativeFinishInit(Native Method)
> >        at
> >
> com.android.internal.os.RuntimeInit.main(RuntimeInit.java:369)
> >
> > [server] ERROR: Could not register display fold listener
> >
> > java.lang.NullPointerException: Attempt to invoke virtual
> method
> > 'java.lang.Class java.lang.Object.getClass()' on a null
> object
> > reference
> >
> >        at
> >
> com.genymobile.scrcpy.wrappers.WindowManager.registerDisplayFoldListener(WindowManager.java:206)
> >        at
> > com.genymobile.scrcpy.device.Device.<init>(Device.java:108)
> >        at
> com.genymobile.scrcpy.Server.scrcpy(Server.java:145)
> >        at
> > com.genymobile.scrcpy.Server.internalMain(Server.java:290)
> >        at com.genymobile.scrcpy.Server.main(Server.java:245)
> >        at
> >
> com.android.internal.os.RuntimeInit.nativeFinishInit(Native Method)
> >        at
> >
> com.android.internal.os.RuntimeInit.main(RuntimeInit.java:369)
> >
> > [server] WARN: No clipboard manager, copy-paste between
> device
> > and computer will not work
> > [server] ERROR: Attempt to invoke virtual method
> > 'android.view.InputDevice
> >
> android.hardware.input.InputManagerGlobal.getInputDevice(int)'
> > on a null object reference
> > java.lang.NullPointerException: Attempt to invoke virtual
> method
> > 'android.view.InputDevice
> >
> android.hardware.input.InputManagerGlobal.getInputDevice(int)'
> > on a null object reference
> >        at
> > android.view.KeyCharacterMap.load(KeyCharacterMap.java:364)
> >        at
> >
> com.genymobile.scrcpy.control.Controller.<init>(Controller.java:45)
> >        at
> com.genymobile.scrcpy.Server.scrcpy(Server.java:159)
> >        at
> > com.genymobile.scrcpy.Server.internalMain(Server.java:290)
> >        at com.genymobile.scrcpy.Server.main(Server.java:245)
> >        at
> >
> com.android.internal.os.RuntimeInit.nativeFinishInit(Native Method)
> >        at
> >
> com.android.internal.os.RuntimeInit.main(RuntimeInit.java:369)
> >
> > INFO: Renderer: opengl
> > INFO: OpenGL version: 4.6.0 NVIDIA 535.183.01
> > INFO: Trilinear filtering enabled
> > WARN: Device disconnected
> > ERROR: Demuxer 'video': stream disabled due to connection
> error
> > ERROR: Demuxer 'audio': stream disabled due to connection
> error
> >
> > Even if the phone is still up :
> >
> > ziomario@Z390-AORUS-PRO-DEST:~/Scrivania$ adb devices
> > List of devices attached
> > 0.0.0.0:6520 <http://0.0.0.0:6520> <http://0.0.0.0:6520
> <http://0.0.0.0:6520>>    device
> >
> > On Tue, Sep 3, 2024 at 1:03 AM Pierrick Bouvier
> > <pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>
> > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>>> wrote:
> >
> > The cvd-host package in this case are binaries/libraries
> > compiled for
> > aarch64, so it can be used on linux aarch64 and
> benefit from
> > kvm
> > acceleration.
> >
> > In your case, running emulation from a x64 host, you need
> > cvd-host_package-x86_64.tar.gz instead.
> >
> > On 9/2/24 15:38, Mario Marietto wrote:
> > > Update :
> > >
> > >
> >
> ziomario@Z390-AORUS-PRO-DEST:/mnt/zroot-133/_OS/Android/aosp_14/android-image/bin$ mkdir x86_64-linux-musl
> > >
> > >
> >
> ziomario@Z390-AORUS-PRO-DEST:/mnt/zroot-133/_OS/Android/aosp_14/android-image/bin$ cp /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/aarch64-linux-musl/crosvm /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/x86_64-linux-musl
> > >
> > >
> >
> ziomario@Z390-AORUS-PRO-DEST:/mnt/zroot-133/_OS/Android/aosp_14/android-image$ HOME=$(pwd) ./bin/launch_cvd -vm_manager qemu_cli -report_anonymous_usage_stats=n --start_webrtc=false
> > >
> > >
> > > Unfortunately it does not work :
> > >
> > >
> > > 09-03 00:03:28.916 2737211 2737211 I launch_cvd:
> > main.cc:235 Using
> > > system_image_dir of:
> > >
> >
> ===================================================================
> > > NOTICE:
> > >
> > > By using this Android Virtual Device, you agree to
> > > Google Terms of Service
> > (https://policies.google.com/terms
> <https://policies.google.com/terms>
> > <https://policies.google.com/terms
> <https://policies.google.com/terms>>
> > > <https://policies.google.com/terms
> <https://policies.google.com/terms>
> > <https://policies.google.com/terms
> <https://policies.google.com/terms>>>).
> > > The Google Privacy Policy
> > (https://policies.google.com/privacy
> <https://policies.google.com/privacy>
> > <https://policies.google.com/privacy
> <https://policies.google.com/privacy>>
> > > <https://policies.google.com/privacy
> <https://policies.google.com/privacy>
> > <https://policies.google.com/privacy
> <https://policies.google.com/privacy>>>)
> > > describes how Google handles information generated
> as you use
> > > Google Services.
> > >
> >
> ===================================================================
> > >
> > > Reading --config option from:
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/android-info.txt
> > > Launching CVD using --config='phone'.
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/aarch64-linux-gnu/gfxstream_graphics_detector: error while loading shared
> > >
> > > libraries: libc.so.6: cannot open shared object
> file: No
> > such file or
> > > directory
> > >
> > > Failed to run graphics detector, bad return value:
> 127.
> > Assuming no
> > > availability.
> > > GPU auto mode: did not detect prerequisites for
> > accelerated rendering
> > > support, enabling --gpu_mode=guest_swiftshader.
> > > GPU vhost user auto mode: not needed for
> > --gpu_mode=guest_swiftshader.
> > > Not enabling vhost user gpu.
> > > Requested resuming a previous session (the default
> > behavior) but the
> > > base images have changed under the overlay, making the
> > overlay
> > > incompatible. Wiping the overlay files.
> > >
> > > Path for instance UDS: /tmp/cf_avd_1000
> > >
> > > The following lines contain useful debugging
> information:
> > > Serial console is disabled; use -console=true to
> enable it.
> > > Logcat output:
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instances/cvd-1/logs/logcat
> > > Kernel log:
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instances/cvd-1/kernel.log
> > > Launcher log:
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instances/cvd-1/logs/launcher.log
> > > Instance configuration:
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instances/cvd-1/cuttlefish_config.json
> > > Launcher Build ID: 12309296
> > > 4. main.cc:232| RunCvdMain|
> > > 3. main.cc:104| Run|
> > > 2. server_loop_impl.cpp:89| Run|
> > > 1. qemu_manager.cpp:247| StartCommands|
> > > |
> >
> device/google/cuttlefish/host/libs/vm_manager/qemu_manager.cpp:97
> > > | Result<std::pair<int, int>>
> > cuttlefish::vm_manager::(anonymous
> > > namespace)::GetQemuVersion(const std::string &)
> > > v CF_EXPECT(qemu_version_ret == 0)
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/aarch64-linux-gnu/qemu/qemu-system-aarch64 -version returned unexpected response .
> > > Stderr was
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/aarch64-linux-gnu/qemu/qemu-system-aarch64: error while loading shared
> > >
> > > libraries: libncursesw.so.6: cannot open shared object
> > file: No such
> > > file or directory
> > >
> > > On Mon, Sep 2, 2024 at 11:30 PM Mario Marietto
> > <marietto2008@gmail.com
> <mailto:marietto2008@gmail.com> <mailto:marietto2008@gmail.com
> <mailto:marietto2008@gmail.com>>
> > > <mailto:marietto2008@gmail.com
> <mailto:marietto2008@gmail.com>
> > <mailto:marietto2008@gmail.com
> <mailto:marietto2008@gmail.com>>>> wrote:
> > >
> > > Something is not right :
> > >
> > >
> >
> ziomario@Z390-AORUS-PRO-DEST:/mnt/zroot-133/_OS/Android/aosp_14/android-image$ unzip ../aosp_cf_*.zip
> > >
> > > Archive:
> ../aosp_cf_arm64_only_phone-img-12309296.zip
> > > inflating: android-info.txt
> > > inflating: fastboot-info.txt
> > > inflating: kernel_16k
> > > inflating: ramdisk_16k.img
> > > inflating: boot.img
> > > inflating: boot_16k.img
> > > inflating: bootloader
> > > inflating: init_boot.img
> > > inflating: userdata.img
> > > inflating: vbmeta.img
> > > inflating: vbmeta_system.img
> > > inflating: vbmeta_system_dlkm.img
> > > inflating: vbmeta_vendor_dlkm.img
> > > inflating: vendor_boot.img
> > > inflating: super.img
> > >
> > >
> >
> ziomario@Z390-AORUS-PRO-DEST:/mnt/zroot-133/_OS/Android/aosp_14/android-image$ tar xzvf ../cvd-host_package.tar.gz
> > >
> > >
> > > ./
> > > ./lib64/
> > > ./lib64/android.hardware.keymaster@3.0.so
> <mailto:android.hardware.keymaster@3.0.so>
> > <mailto:android.hardware.keymaster@3.0.so
> <mailto:android.hardware.keymaster@3.0.so>>
> > > <mailto:android.hardware.keymaster@3.0.so
> <mailto:android.hardware.keymaster@3.0.so>
> > <mailto:android.hardware.keymaster@3.0.so
> <mailto:android.hardware.keymaster@3.0.so>>>
> > > ./lib64/libciborium_io.dylib.so
> <http://libciborium_io.dylib.so>
> > <http://libciborium_io.dylib.so
> <http://libciborium_io.dylib.so>>
> > <http://libciborium_io.dylib.so
> <http://libciborium_io.dylib.so>
> > <http://libciborium_io.dylib.so
> <http://libciborium_io.dylib.so>>>
> > > ./lib64/libjpeg.so
> > > ./lib64/cuttlefish_net.so
> > > ./lib64/libbase.so
> > > ./lib64/vulkan.pastel.so
> <http://vulkan.pastel.so> <http://vulkan.pastel.so
> <http://vulkan.pastel.so>>
> > <http://vulkan.pastel.so <http://vulkan.pastel.so>
> <http://vulkan.pastel.so <http://vulkan.pastel.so>>>
> > > ./lib64/libcuttlefish_host_config.so
> > > ./lib64/libflagset.dylib.so
> <http://libflagset.dylib.so>
> > <http://libflagset.dylib.so
> <http://libflagset.dylib.so>> <http://libflagset.dylib.so
> <http://libflagset.dylib.so>
> > <http://libflagset.dylib.so
> <http://libflagset.dylib.so>>>
> > > ./lib64/libkmr_common.dylib.so
> <http://libkmr_common.dylib.so>
> > <http://libkmr_common.dylib.so
> <http://libkmr_common.dylib.so>>
> > <http://libkmr_common.dylib.so
> <http://libkmr_common.dylib.so> <http://libkmr_common.dylib.so
> <http://libkmr_common.dylib.so>>>
> > > ./lib64/libpkcs1.dylib.so
> <http://libpkcs1.dylib.so> <http://libpkcs1.dylib.so
> <http://libpkcs1.dylib.so>>
> > <http://libpkcs1.dylib.so <http://libpkcs1.dylib.so>
> <http://libpkcs1.dylib.so <http://libpkcs1.dylib.so>>>
> > > ./lib64/libicui18n-host.so
> > > ./lib64/libwayland_client.so
> > > ./lib64/libunwindstack.so
> > > ./lib64/libkmr_ta.dylib.so
> <http://libkmr_ta.dylib.so>
> > <http://libkmr_ta.dylib.so
> <http://libkmr_ta.dylib.so>> <http://libkmr_ta.dylib.so
> <http://libkmr_ta.dylib.so>
> > <http://libkmr_ta.dylib.so <http://libkmr_ta.dylib.so>>>
> > > ./lib64/libcoset.dylib.so
> <http://libcoset.dylib.so> <http://libcoset.dylib.so
> <http://libcoset.dylib.so>>
> > <http://libcoset.dylib.so <http://libcoset.dylib.so>
> <http://libcoset.dylib.so <http://libcoset.dylib.so>>>
> > > ./lib64/libcppbor.so
> > > ./lib64/libgatekeeper.so
> > > ./lib64/libyuv.so
> > > ./lib64/libgrpc++.so
> > > ./lib64/libkmr_cf_ffi.so
> > > ./lib64/libcppcose_rkp.so
> > > ./lib64/libcuttlefish_transport.so
> > > ./lib64/liblzma.so
> > > ./lib64/libciborium_ll.dylib.so
> <http://libciborium_ll.dylib.so>
> > <http://libciborium_ll.dylib.so
> <http://libciborium_ll.dylib.so>>
> > <http://libciborium_ll.dylib.so
> <http://libciborium_ll.dylib.so>
> > <http://libciborium_ll.dylib.so
> <http://libciborium_ll.dylib.so>>>
> > > ./lib64/libcuttlefish_allocd_utils.so
> > > ./lib64/libgflags.so
> > > ./lib64/android.hardware.keymaster@4.0.so
> <mailto:android.hardware.keymaster@4.0.so>
> > <mailto:android.hardware.keymaster@4.0.so
> <mailto:android.hardware.keymaster@4.0.so>>
> > > <mailto:android.hardware.keymaster@4.0.so
> <mailto:android.hardware.keymaster@4.0.so>
> > <mailto:android.hardware.keymaster@4.0.so
> <mailto:android.hardware.keymaster@4.0.so>>>
> > > ./lib64/libcfg_if.dylib.so
> <http://libcfg_if.dylib.so>
> > <http://libcfg_if.dylib.so
> <http://libcfg_if.dylib.so>> <http://libcfg_if.dylib.so
> <http://libcfg_if.dylib.so>
> > <http://libcfg_if.dylib.so <http://libcfg_if.dylib.so>>>
> > > ./lib64/libspki.dylib.so
> <http://libspki.dylib.so> <http://libspki.dylib.so
> <http://libspki.dylib.so>>
> > <http://libspki.dylib.so <http://libspki.dylib.so>
> <http://libspki.dylib.so <http://libspki.dylib.so>>>
> > > ./lib64/libzeroize.dylib.so
> <http://libzeroize.dylib.so>
> > <http://libzeroize.dylib.so
> <http://libzeroize.dylib.so>> <http://libzeroize.dylib.so
> <http://libzeroize.dylib.so>
> > <http://libzeroize.dylib.so
> <http://libzeroize.dylib.so>>>
> > > ./lib64/libcgrouprc.so
> > > ./lib64/libprotobuf-cpp-full.so
> > > ./lib64/libcutils.so
> > > ./lib64/libsqlite.so
> > > ./lib64/libcuttlefish_utils_result.so
> > > ./lib64/libbinder_ndk.so
> > > ./lib64/libext2_uuid-host.so
> > > ./lib64/libhex.dylib.so
> <http://libhex.dylib.so> <http://libhex.dylib.so
> <http://libhex.dylib.so>>
> > <http://libhex.dylib.so <http://libhex.dylib.so>
> <http://libhex.dylib.so <http://libhex.dylib.so>>>
> > > ./lib64/libc_musl.so
> > > ./lib64/libconst_oid.dylib.so
> <http://libconst_oid.dylib.so>
> > <http://libconst_oid.dylib.so
> <http://libconst_oid.dylib.so>> <http://libconst_oid.dylib.so
> <http://libconst_oid.dylib.so>
> > <http://libconst_oid.dylib.so
> <http://libconst_oid.dylib.so>>>
> > > ./lib64/libprotobuf_support.dylib.so
> <http://libprotobuf_support.dylib.so>
> > <http://libprotobuf_support.dylib.so
> <http://libprotobuf_support.dylib.so>>
> > > <http://libprotobuf_support.dylib.so
> <http://libprotobuf_support.dylib.so>
> > <http://libprotobuf_support.dylib.so
> <http://libprotobuf_support.dylib.so>>>
> > > ./lib64/tpm2-tss2-tcti.so
> > > ./lib64/libserde.dylib.so
> <http://libserde.dylib.so> <http://libserde.dylib.so
> <http://libserde.dylib.so>>
> > <http://libserde.dylib.so <http://libserde.dylib.so>
> <http://libserde.dylib.so <http://libserde.dylib.so>>>
> > > ./lib64/libartpalette.so
> > > ./lib64/liblog.so
> > > ./lib64/libonce_cell.dylib.so
> <http://libonce_cell.dylib.so>
> > <http://libonce_cell.dylib.so
> <http://libonce_cell.dylib.so>> <http://libonce_cell.dylib.so
> <http://libonce_cell.dylib.so>
> > <http://libonce_cell.dylib.so
> <http://libonce_cell.dylib.so>>>
> > > ./lib64/libthiserror.dylib.so
> <http://libthiserror.dylib.so>
> > <http://libthiserror.dylib.so
> <http://libthiserror.dylib.so>> <http://libthiserror.dylib.so
> <http://libthiserror.dylib.so>
> > <http://libthiserror.dylib.so
> <http://libthiserror.dylib.so>>>
> > > ./lib64/libssl-host.so
> > > ./lib64/libc++.so
> > > ./lib64/libext4_utils.so
> > > ./lib64/libpkcs8.dylib.so
> <http://libpkcs8.dylib.so> <http://libpkcs8.dylib.so
> <http://libpkcs8.dylib.so>>
> > <http://libpkcs8.dylib.so <http://libpkcs8.dylib.so>
> <http://libpkcs8.dylib.so <http://libpkcs8.dylib.so>>>
> > > ./lib64/libsparse-host.so
> > > ./lib64/sandboxed_api_sandbox2.so
> > > ./lib64/libcuttlefish_command_util.so
> > > ./lib64/libbssl_sys.dylib.so
> <http://libbssl_sys.dylib.so>
> > <http://libbssl_sys.dylib.so
> <http://libbssl_sys.dylib.so>> <http://libbssl_sys.dylib.so
> <http://libbssl_sys.dylib.so>
> > <http://libbssl_sys.dylib.so
> <http://libbssl_sys.dylib.so>>>
> > > ./lib64/libkeymaster_messages.so
> > > ./lib64/libcuttlefish_web.so
> > > ./lib64/libvpx.so
> > > ./lib64/libopus.so
> > > ./lib64/libminijail.so
> > > ./lib64/libcurl-host.so
> > > ./lib64/libcuttlefish_kernel_log_monitor_utils.so
> > > ./lib64/tpm2-tss2-util.so
> > > ./lib64/liblibc.dylib.so
> <http://liblibc.dylib.so> <http://liblibc.dylib.so
> <http://liblibc.dylib.so>>
> > <http://liblibc.dylib.so <http://liblibc.dylib.so>
> <http://liblibc.dylib.so <http://liblibc.dylib.so>>>
> > > ./lib64/libprotobuf.dylib.so
> <http://libprotobuf.dylib.so>
> > <http://libprotobuf.dylib.so
> <http://libprotobuf.dylib.so>> <http://libprotobuf.dylib.so
> <http://libprotobuf.dylib.so>
> > <http://libprotobuf.dylib.so
> <http://libprotobuf.dylib.so>>>
> > > ./lib64/libbitflags.dylib.so
> <http://libbitflags.dylib.so>
> > <http://libbitflags.dylib.so
> <http://libbitflags.dylib.so>> <http://libbitflags.dylib.so
> <http://libbitflags.dylib.so>
> > <http://libbitflags.dylib.so
> <http://libbitflags.dylib.so>>>
> > > ./lib64/libutils.so
> > > ./lib64/libjsoncpp.so
> > > ./lib64/libext2_blkid-host.so
> > > ./lib64/libnl.so
> > > ./lib64/tpm2-tss2-sys.so
> > > ./lib64/libartbase.so
> > > ./lib64/libxml2.so
> > > ./lib64/libkmr_proto_rust.dylib.so
> <http://libkmr_proto_rust.dylib.so>
> > <http://libkmr_proto_rust.dylib.so
> <http://libkmr_proto_rust.dylib.so>>
> > <http://libkmr_proto_rust.dylib.so
> <http://libkmr_proto_rust.dylib.so>
> > <http://libkmr_proto_rust.dylib.so
> <http://libkmr_proto_rust.dylib.so>>>
> > > ./lib64/libcuttlefish_security.so
> > > ./lib64/libsecure_env_tpm.dylib.so
> <http://libsecure_env_tpm.dylib.so>
> > <http://libsecure_env_tpm.dylib.so
> <http://libsecure_env_tpm.dylib.so>>
> > <http://libsecure_env_tpm.dylib.so
> <http://libsecure_env_tpm.dylib.so>
> > <http://libsecure_env_tpm.dylib.so
> <http://libsecure_env_tpm.dylib.so>>>
> > > ./lib64/libz-host.so
> > > ./lib64/libprocessgroup.so
> > > ./lib64/libcrypto_utils.so
> > > ./lib64/libder.dylib.so
> <http://libder.dylib.so> <http://libder.dylib.so
> <http://libder.dylib.so>>
> > <http://libder.dylib.so <http://libder.dylib.so>
> <http://libder.dylib.so <http://libder.dylib.so>>>
> > > ./lib64/libdexfile.so
> > > ./lib64/cf_metrics_proto.so
> > > ./lib64/tpm2-tss2-esys.so
> > > ./lib64/libcuttlefish_utils.so
> > > ./lib64/libkeymaster_portable.so
> > > ./lib64/libfruit.so
> > > ./lib64/tpm2-tss2-rc.so
> > > ./lib64/libcap.so
> > > ./lib64/libnix.dylib.so
> <http://libnix.dylib.so> <http://libnix.dylib.so
> <http://libnix.dylib.so>>
> > <http://libnix.dylib.so <http://libnix.dylib.so>
> <http://libnix.dylib.so <http://libnix.dylib.so>>>
> > > ./lib64/libicuuc-host.so
> > > ./lib64/libziparchive.so
> > > ./lib64/libkmr_ta_nonsecure.dylib.so
> <http://libkmr_ta_nonsecure.dylib.so>
> > <http://libkmr_ta_nonsecure.dylib.so
> <http://libkmr_ta_nonsecure.dylib.so>>
> > > <http://libkmr_ta_nonsecure.dylib.so
> <http://libkmr_ta_nonsecure.dylib.so>
> > <http://libkmr_ta_nonsecure.dylib.so
> <http://libkmr_ta_nonsecure.dylib.so>>>
> > > ./lib64/libstd.dylib.so
> <http://libstd.dylib.so> <http://libstd.dylib.so
> <http://libstd.dylib.so>>
> > <http://libstd.dylib.so <http://libstd.dylib.so>
> <http://libstd.dylib.so <http://libstd.dylib.so>>>
> > > ./lib64/libhalf.dylib.so
> <http://libhalf.dylib.so> <http://libhalf.dylib.so
> <http://libhalf.dylib.so>>
> > <http://libhalf.dylib.so <http://libhalf.dylib.so>
> <http://libhalf.dylib.so <http://libhalf.dylib.so>>>
> > > ./lib64/tpm2-tss2-mu.so
> > > ./lib64/libmemoffset.dylib.so
> <http://libmemoffset.dylib.so>
> > <http://libmemoffset.dylib.so
> <http://libmemoffset.dylib.so>> <http://libmemoffset.dylib.so
> <http://libmemoffset.dylib.so>
> > <http://libmemoffset.dylib.so
> <http://libmemoffset.dylib.so>>>
> > > ./lib64/liblp.so
> > > ./lib64/libcuttlefish_fs.so
> > > ./lib64/libProxyConfig.so
> > > ./lib64/libopenssl.dylib.so
> <http://libopenssl.dylib.so>
> > <http://libopenssl.dylib.so
> <http://libopenssl.dylib.so>> <http://libopenssl.dylib.so
> <http://libopenssl.dylib.so>
> > <http://libopenssl.dylib.so
> <http://libopenssl.dylib.so>>>
> > > ./lib64/libkmr_wire.dylib.so
> <http://libkmr_wire.dylib.so>
> > <http://libkmr_wire.dylib.so
> <http://libkmr_wire.dylib.so>> <http://libkmr_wire.dylib.so
> <http://libkmr_wire.dylib.so>
> > <http://libkmr_wire.dylib.so
> <http://libkmr_wire.dylib.so>>>
> > > ./lib64/libkmr_crypto_boring.dylib.so
> <http://libkmr_crypto_boring.dylib.so>
> > <http://libkmr_crypto_boring.dylib.so
> <http://libkmr_crypto_boring.dylib.so>>
> > > <http://libkmr_crypto_boring.dylib.so
> <http://libkmr_crypto_boring.dylib.so>
> > <http://libkmr_crypto_boring.dylib.so
> <http://libkmr_crypto_boring.dylib.so>>>
> > > ./lib64/liblog_rust.dylib.so
> <http://liblog_rust.dylib.so>
> > <http://liblog_rust.dylib.so
> <http://liblog_rust.dylib.so>> <http://liblog_rust.dylib.so
> <http://liblog_rust.dylib.so>
> > <http://liblog_rust.dylib.so
> <http://liblog_rust.dylib.so>>>
> > > ./lib64/libhidlbase.so
> > > ./lib64/libgrpc_wrap.so
> > > ./lib64/libgrpc++_unsecure.so
> > > ./lib64/libbytes.dylib.so
> <http://libbytes.dylib.so> <http://libbytes.dylib.so
> <http://libbytes.dylib.so>>
> > <http://libbytes.dylib.so <http://libbytes.dylib.so>
> <http://libbytes.dylib.so <http://libbytes.dylib.so>>>
> > > ./lib64/libsoft_attestation_cert.so
> > > ./lib64/libcuttlefish_run_cvd_proto.so
> > > ./lib64/libbinder.so
> > > ./lib64/libcrypto-host.so
> > > ./lib64/libwebm_mkvmuxer.so
> > > ./lib64/libkmr_cf.dylib.so
> <http://libkmr_cf.dylib.so>
> > <http://libkmr_cf.dylib.so
> <http://libkmr_cf.dylib.so>> <http://libkmr_cf.dylib.so
> <http://libkmr_cf.dylib.so>
> > <http://libkmr_cf.dylib.so <http://libkmr_cf.dylib.so>>>
> > > ./lib64/libciborium.dylib.so
> <http://libciborium.dylib.so>
> > <http://libciborium.dylib.so
> <http://libciborium.dylib.so>> <http://libciborium.dylib.so
> <http://libciborium.dylib.so>
> > <http://libciborium.dylib.so
> <http://libciborium.dylib.so>>>
> > > ./lib64/libpuresoftkeymasterdevice_host.so
> > > ./lib64/libx509_cert.dylib.so
> <http://libx509_cert.dylib.so>
> > <http://libx509_cert.dylib.so
> <http://libx509_cert.dylib.so>> <http://libx509_cert.dylib.so
> <http://libx509_cert.dylib.so>
> > <http://libx509_cert.dylib.so
> <http://libx509_cert.dylib.so>>>
> > > ./lib64/libsec1.dylib.so
> <http://libsec1.dylib.so> <http://libsec1.dylib.so
> <http://libsec1.dylib.so>>
> > <http://libsec1.dylib.so <http://libsec1.dylib.so>
> <http://libsec1.dylib.so <http://libsec1.dylib.so>>>
> > > ./nativetest64/
> > > ./nativetest64/modem_simulator_test/
> > >
> ./nativetest64/modem_simulator_test/modem_simulator_test
> > > ./nativetest64/cuttlefish_net_tests/
> > >
> ./nativetest64/cuttlefish_net_tests/cuttlefish_net_tests
> > > ./etc/
> > > ./etc/modem_simulator/
> > > ./etc/modem_simulator/files/
> > >
> >
> ./etc/modem_simulator/files/iccprofile_for_sim0_for_CtsCarrierApiTestCases.xml
> > >
> ./etc/modem_simulator/files/iccprofile_for_sim0.xml
> > > ./etc/modem_simulator/files/numeric_operator.xml
> > > ./etc/cvd_rsa4096.avbpubkey
> > > ./etc/bootloader_aarch64/
> > > ./etc/bootloader_aarch64/bootloader.qemu
> > > ./etc/bootloader_aarch64/bootloader.crosvm
> > > ./etc/bootloader_riscv64/
> > > ./etc/bootloader_riscv64/bootloader.qemu
> > > ./etc/automotive/
> > > ./etc/automotive/vhalconfig/
> > >
> >
> ./etc/automotive/vhalconfig/VendorClusterTestProperties.json
> > > ./etc/automotive/vhalconfig/DefaultProperties.json
> > > ./etc/automotive/vhalconfig/TestProperties.json
> > > ./etc/automotive/proxy_config.json
> > > ./etc/cvd_rsa2048.avbpubkey
> > > ./etc/cvd_avb_testkey_rsa4096.pem
> > > ./etc/bootloader_arm/
> > > ./etc/bootloader_arm/bootloader.qemu
> > > ./etc/bootloader_x86_64/
> > > ./etc/bootloader_x86_64/bootloader.qemu
> > > ./etc/bootloader_x86_64/bootloader.crosvm
> > > ./etc/cvd_avb_testkey_rsa2048.pem
> > > ./etc/openwrt/
> > > ./etc/openwrt/images/
> > > ./etc/openwrt/images/openwrt_kernel_aarch64
> > > ./etc/openwrt/images/openwrt_rootfs_x86_64
> > > ./etc/openwrt/images/openwrt_rootfs_aarch64
> > > ./etc/openwrt/images/openwrt_kernel_x86_64
> > > ./etc/cvd_config/
> > > ./etc/cvd_config/cvd_config_tv.json
> > > ./etc/cvd_config/cvd_config_tablet.json
> > > ./etc/cvd_config/cvd_config_wear.json
> > > ./etc/cvd_config/cvd_config_auto_portrait.json
> > > ./etc/cvd_config/cvd_config_slim.json
> > > ./etc/cvd_config/cvd_config_go.json
> > > ./etc/cvd_config/cvd_config_foldable.json
> > > ./etc/cvd_config/cvd_config_auto.json
> > > ./etc/cvd_config/cvd_config_auto_md.json
> > > ./etc/cvd_config/cvd_config_phone.json
> > > ./usr/
> > > ./usr/share/
> > > ./usr/share/vulkan/
> > > ./usr/share/vulkan/icd.d/
> > > ./usr/share/vulkan/icd.d/vk_swiftshader_icd.json
> > > ./usr/share/qemu/
> > > ./usr/share/qemu/aarch64-linux-gnu/
> > >
> >
> ./usr/share/qemu/aarch64-linux-gnu/opensbi-riscv64-generic-fw_dynamic.bin
> > > ./usr/share/qemu/aarch64-linux-gnu/efi-virtio.rom
> > > ./usr/share/qemu/aarch64-linux-gnu/keymaps/
> > > ./usr/share/qemu/aarch64-linux-gnu/keymaps/en-us
> > > ./usr/share/webrtc/
> > > ./usr/share/webrtc/assets/
> > > ./usr/share/webrtc/assets/style.css
> > > ./usr/share/webrtc/assets/index.css
> > > ./usr/share/webrtc/assets/index.html
> > > ./usr/share/webrtc/assets/js/
> > > ./usr/share/webrtc/assets/js/location.js
> > > ./usr/share/webrtc/assets/js/rootcanal.js
> > > ./usr/share/webrtc/assets/js/app.js
> > > ./usr/share/webrtc/assets/js/touch.js
> > > ./usr/share/webrtc/assets/js/adb.js
> > > ./usr/share/webrtc/assets/js/index.js
> > > ./usr/share/webrtc/assets/js/cf_webrtc.js
> > > ./usr/share/webrtc/assets/js/server_connector.js
> > > ./usr/share/webrtc/assets/js/controls.js
> > > ./usr/share/webrtc/assets/controls.css
> > > ./usr/share/webrtc/assets/custom.css
> > > ./usr/share/webrtc/assets/client.html
> > > ./usr/share/webrtc/certs/
> > > ./usr/share/webrtc/certs/server.p12
> > > ./usr/share/webrtc/certs/server.key
> > > ./usr/share/webrtc/certs/trusted.pem
> > > ./usr/share/webrtc/certs/server.crt
> > > ./usr/share/zoneinfo/
> > > ./usr/share/zoneinfo/tzdata
> > > ./usr/share/crosvm/
> > > ./usr/share/crosvm/aarch64-linux-gnu/
> > > ./usr/share/crosvm/aarch64-linux-gnu/seccomp/
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/snd_null_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/gpu_render_server.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/battery.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/block_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/pmem_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/wl_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/9p_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/input_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/net_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/rng_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/coiommu_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/gpu_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/serial_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/cras_audio_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/null_audio_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/snd_cras_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/vhost_scmi_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/balloon_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/vhost_net_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/vhost_vsock_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/fs_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/video_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/xhci_device.policy
> > >
> >
> ./usr/share/crosvm/aarch64-linux-gnu/seccomp/vios_audio_device.policy
> > > ./bin/
> > > ./bin/modem_simulator
> > > ./bin/ms-tpm-20-ref
> > > ./bin/mkenvimage_slim
> > > ./bin/metrics
> > > ./bin/socket_vsock_proxy
> > > ./bin/resize.f2fs
> > > ./bin/metrics_launcher
> > > ./bin/automotive_vsock_proxy
> > > ./bin/newfs_msdos
> > > ./bin/netsim-ui/
> > > ./bin/netsim-ui/assets/
> > > ./bin/netsim-ui/assets/grid-background.svg
> > > ./bin/netsim-ui/assets/netsim-logo.svg
> > > ./bin/netsim-ui/assets/polar-background.svg
> > > ./bin/netsim-ui/assets/hexagonal-background.png
> > > ./bin/netsim-ui/assets/netsim-logo-b.svg
> > > ./bin/netsim-ui/node_modules/
> > > ./bin/netsim-ui/node_modules/tslib/
> > > ./bin/netsim-ui/node_modules/tslib/tslib.es6.js
> > > ./bin/netsim-ui/index.html
> > > ./bin/netsim-ui/js/
> > > ./bin/netsim-ui/js/device-info.js
> > > ./bin/netsim-ui/js/device-list.js
> > > ./bin/netsim-ui/js/packet-info.js
> > > ./bin/netsim-ui/js/device-dropzone.js
> > > ./bin/netsim-ui/js/navigation-bar.js
> > > ./bin/netsim-ui/js/device-map.js
> > > ./bin/netsim-ui/js/device-dragzone.js
> > > ./bin/netsim-ui/js/netsim-app.js
> > > ./bin/netsim-ui/js/customize-map-button.js
> > > ./bin/netsim-ui/js/device-observer.js
> > > ./bin/netsim-ui/js/license-info.js
> > > ./bin/netsim-ui/js/cube-sprite.js
> > > ./bin/netsim-ui/js/pyramid-sprite.js
> > > ./bin/unpack_bootimg
> > > ./bin/adb
> > > ./bin/extract-vmlinux
> > > ./bin/health
> > > ./bin/screen_recording_server
> > > ./bin/lz4
> > > ./bin/wmediumd_gen_config
> > > ./bin/gnss_grpc_proxy
> > > ./bin/simg2img
> > > ./bin/secure_env
> > > ./bin/mke2fs
> > > ./bin/snapshot_util_cvd
> > > ./bin/cvd_internal_display
> > > ./bin/acloud_translator
> > > ./bin/defrag.f2fs
> > > ./bin/tombstone_receiver
> > > ./bin/root-canal
> > > ./bin/netsimd
> > > ./bin/console_forwarder
> > > ./bin/powerwash_cvd
> > > ./bin/process_restarter
> > > ./bin/fsck.f2fs
> > > ./bin/cvd_host_bugreport
> > > ./bin/extract-ikconfig
> > > ./bin/cvd_internal_status
> > > ./bin/webRTC
> > > ./bin/acloud
> > > ./bin/tcp_connector
> > > ./bin/process_sandboxer
> > > ./bin/webrtc_operator
> > > ./bin/cvd_update_location
> > > ./bin/e2fsdroid
> > > ./bin/avbtool
> > > ./bin/fastboot
> > > ./bin/build_super_image
> > > ./bin/powerbtn_cvd
> > > ./bin/allocd_client
> > > ./bin/dump.f2fs
> > > ./bin/netsim
> > > ./bin/casimir
> > > ./bin/pica
> > > ./bin/cvd_update_security_algorithm
> > > ./bin/record_cvd
> > > ./bin/vhal_proxy_server
> > > ./bin/cvd_status
> > > ./bin/cvd_import_locations
> > > ./bin/launch_cvd
> > > ./bin/cvd_internal_start
> > > ./bin/restart_cvd
> > > ./bin/cvd_internal_host_bugreport
> > > ./bin/mkuserimg_mke2fs
> > > ./bin/fec
> > > ./bin/cvd_internal_env
> > > ./bin/vhost_device_vsock
> > > ./bin/cvd_internal_stop
> > > ./bin/cvd_send_sms
> > > ./bin/assemble_cvd
> > > ./bin/cvd_send_id_disclosure
> > > ./bin/mcopy
> > > ./bin/operator_proxy
> > > ./bin/mkbootfs
> > > ./bin/run_cvd
> > > ./bin/openwrt_control_server
> > > ./bin/mkbootimg
> > > ./bin/kernel_log_monitor
> > > ./bin/mmd
> > > ./bin/toybox
> > > ./bin/crosvm
> > > ./bin/aarch64-linux-musl/
> > > ./bin/aarch64-linux-musl/crosvm
> > > ./bin/sefcontext_compile
> > > ./bin/wmediumd
> > > ./bin/echo_server
> > > ./bin/log_tee
> > > ./bin/lpmake
> > > ./bin/logcat_receiver
> > > ./bin/lpunpack
> > > ./bin/control_env_proxy_server
> > > ./bin/mtools
> > > ./bin/adb_connector
> > > ./bin/aarch64-linux-gnu/
> > > ./bin/aarch64-linux-gnu/libepoxy.so.0
> > > ./bin/aarch64-linux-gnu/libffi.so.7
> > > ./bin/aarch64-linux-gnu/qemu/
> > > ./bin/aarch64-linux-gnu/qemu/qemu-system-x86_64
> > > ./bin/aarch64-linux-gnu/qemu/libepoxy.so.0
> > > ./bin/aarch64-linux-gnu/qemu/libvirglrenderer.so.1
> > > ./bin/aarch64-linux-gnu/qemu/libgbm.so.1
> > >
> ./bin/aarch64-linux-gnu/qemu/libgfxstream_backend.so.0
> > >
> ./bin/aarch64-linux-gnu/qemu/librutabaga_gfx_ffi.so.0
> > > ./bin/aarch64-linux-gnu/qemu/qemu-system-riscv64
> > > ./bin/aarch64-linux-gnu/qemu/qemu-system-aarch64
> > > ./bin/aarch64-linux-gnu/qemu/libc++.so.1
> > > ./bin/aarch64-linux-gnu/qemu/libunwind.so.1
> > > ./bin/aarch64-linux-gnu/qemu/libz.so.1
> > > ./bin/aarch64-linux-gnu/qemu/libc++abi.so.1
> > > ./bin/aarch64-linux-gnu/libvirglrenderer.so.1
> > > ./bin/aarch64-linux-gnu/libdrm.so.2
> > > ./bin/aarch64-linux-gnu/libgbm.so.1
> > > ./bin/aarch64-linux-gnu/libgfxstream_backend.so
> > > ./bin/aarch64-linux-gnu/libwayland-client.so.0
> > > ./bin/aarch64-linux-gnu/libminijail.so
> > >
> ./bin/aarch64-linux-gnu/gfxstream_graphics_detector
> > > ./bin/aarch64-linux-gnu/crosvm
> > > ./bin/lpadd
> > > ./bin/make_f2fs
> > > ./bin/sandboxer_proxy
> > > ./bin/stop_cvd
> > > ./bin/casimir_control_server
> > >
> > >
> > >
> >
> ziomario@Z390-AORUS-PRO-DEST:/mnt/zroot-133/_OS/Android/aosp_14/android-image$ HOME=$(pwd) ./bin/launch_cvd -vm_manager qemu_cli -report_anonymous_usage_stats=n --start_webrtc=false
> > >
> > >
> > > 09-02 23:27:10.473 2729990 2729990 I launch_cvd:
> > main.cc:235 Using
> > > system_image_dir of:
> > >
> >
> ===================================================================
> > > NOTICE:
> > >
> > > By using this Android Virtual Device, you agree to
> > > Google Terms of Service
> > (https://policies.google.com/terms
> <https://policies.google.com/terms>
> > <https://policies.google.com/terms
> <https://policies.google.com/terms>>
> > > <https://policies.google.com/terms
> <https://policies.google.com/terms>
> > <https://policies.google.com/terms
> <https://policies.google.com/terms>>>).
> > > The Google Privacy Policy
> > (https://policies.google.com/privacy
> <https://policies.google.com/privacy>
> > <https://policies.google.com/privacy
> <https://policies.google.com/privacy>>
> > > <https://policies.google.com/privacy
> <https://policies.google.com/privacy>
> > <https://policies.google.com/privacy
> <https://policies.google.com/privacy>>>)
> > > describes how Google handles information
> generated as
> > you use
> > > Google Services.
> > >
> >
> ===================================================================
> > >
> > > Reading --config option from:
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/android-info.txt
> > > Launching CVD using --config='phone'.
> > > aarch64-binfmt-P: Could not open
> > '/lib/ld-linux-aarch64.so.1': No
> > > such file or directory
> > > Failed to run graphics detector, bad return value:
> > 255. Assuming no
> > > availability.
> > > GPU auto mode: did not detect prerequisites for
> > accelerated
> > > rendering support, enabling
> --gpu_mode=guest_swiftshader.
> > > GPU vhost user auto mode: not needed for
> > > --gpu_mode=guest_swiftshader. Not enabling
> vhost user
> > gpu.
> > > Requested resuming a previous session (the default
> > behavior) but the
> > > base images have changed under the overlay, making
> > the overlay inc
> > > ompatible. Wiping the overlay files.
> > > Path for instance UDS: /tmp/cf_avd_1000
> > > Failed to run
> > >
> >
> `/mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/crosvm
> > > create_qcow2 --backing-file
> > /mnt/zroot-133/_OS/Android/aosp_
> > >
> >
> 14/android-image/cuttlefish/instances/cvd-1/persistent_composite.img
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/cuttlefish/instan
> > > ces/cvd-1/persistent_composite_overlay.img`
> > > stdout:
> > > ###
> > >
> > > ###
> > > stderr:
> > > ###
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/crosvm: riga 3:
> > >
> >
> /mnt/zroot-133/_OS/Android/aosp_14/android-image/bin/x86_64-linux-
> > > musl/crosvm: File o directory non esistente
> > >
> > > ###
> > > Return code: "127"
> > > qemu: uncaught target signal 6 (Aborted) -
> core dumped
> > > 09-02 23:27:31.223 2729990 2729990 E launch_cvd:
> > subprocess.cpp:207
> > > Subprocess 2730018 was interrupted by a signal
> > 'Aborted' (6)
> > > 09-02 23:27:31.224 2729990 2729990 E launch_cvd:
> > main.cc:323
> > > assemble_cvd returned -1
> > >
> > > On Mon, Sep 2, 2024 at 11:20 PM Mario Marietto
> > > <marietto2008@gmail.com
> <mailto:marietto2008@gmail.com>
> > <mailto:marietto2008@gmail.com
> <mailto:marietto2008@gmail.com>>
> > <mailto:marietto2008@gmail.com
> <mailto:marietto2008@gmail.com>
> > <mailto:marietto2008@gmail.com
> <mailto:marietto2008@gmail.com>>>> wrote:
> > >
> > > Hello.
> > >
> > > I've downloaded this file :
> > > aosp_cf_arm64_only_phone-img-12309296.zip and
> > this file :
> > > cvd-host_package.tar.gz
> > >
> > > from here :
> > >
> >
> https://ci.android.com/builds/submitted/12309296/aosp_cf_arm64_only_phone-trunk_staging-userdebug/latest <https://ci.android.com/builds/submitted/12309296/aosp_cf_arm64_only_phone-trunk_staging-userdebug/latest> <https://ci.android.com/builds/submitted/12309296/aosp_cf_arm64_only_phone-trunk_staging-userdebug/latest <https://ci.android.com/builds/submitted/12309296/aosp_cf_arm64_only_phone-trunk_staging-userdebug/latest>> <https://ci.android.com/builds/submitted/12309296/aosp_cf_arm64_only_phone-trunk_staging-userdebug/latest <https://ci.android.com/builds/submitted/12309296/aosp_cf_arm64_only_phone-trunk_staging-userdebug/latest> <https://ci.android.com/builds/submitted/12309296/aosp_cf_arm64_only_phone-trunk_staging-userdebug/latest <https://ci.android.com/builds/submitted/12309296/aosp_cf_arm64_only_phone-trunk_staging-userdebug/latest>>>
> > >
> > > But let's say that I don't want to use the
> *.img
> > files that are
> > > stored inside
> > "aosp_cf_arm64_only_phone-img-12309296.zip",but
> > > the same files that have been produced when I
> > have compiled this
> > > version of Android :
> > >
> > >
> >
> https://github.com/raspberry-vanilla/android_local_manifest?tab=readme-ov-file <https://github.com/raspberry-vanilla/android_local_manifest?tab=readme-ov-file> <https://github.com/raspberry-vanilla/android_local_manifest?tab=readme-ov-file <https://github.com/raspberry-vanilla/android_local_manifest?tab=readme-ov-file>> <https://github.com/raspberry-vanilla/android_local_manifest?tab=readme-ov-file <https://github.com/raspberry-vanilla/android_local_manifest?tab=readme-ov-file> <https://github.com/raspberry-vanilla/android_local_manifest?tab=readme-ov-file <https://github.com/raspberry-vanilla/android_local_manifest?tab=readme-ov-file>>>
> > >
> > > Can I do it ? Is it supposed to work the
> same ?
> > >
> > > Thanks.
> > >
> > > On Mon, Sep 2, 2024 at 10:23 PM Pierrick
> Bouvier
> > > <pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>
> > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>>
> > > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>
> > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>>>> wrote:
> > >
> > >
> > >
> > > On 9/2/24 13:20, Pierrick Bouvier wrote:
> > > > On 9/2/24 12:53, Mario Marietto wrote:
> > > >> Hello Pierrick.
> > > >>
> > > >> With Cuttlefish can I emulate
> Android 14
> > for arm64 ? I
> > > ask because in
> > > >> your script I read :
> > > >>
> > > >>
> > "|/home/user/.work/qemu/build/qemu-system-x86_64", so,I
> > > suspect that you
> > > >> have emulated Android x64 bit,but
> I need
> > arm64. |
> > > >>
> > > >
> > > > Yes, it works for both
> architecture. The
> > only thing I
> > > didn't try is an
> > > > arm64 vm accelerated with kvm (I don't
> > have this a
> > > linux-aarch64
> > > > machine), but it should work.
> > >
> > > And of course, if you want to write a
> custom
> > wrapper for
> > > qemu, name it
> > > qemu-system-aarch64, and call the same
> binary
> > instead of
> > > x86_64 variants.
> > >
> > > >
> > > >> I also read "for aarch64 images:
> select
> > > >>
> > |aosp_cf_arm64_only_phone-trunk_staging-userdebug" : I'm
> > > not able to
> > > >> download this kind of images. I don't
> > understand how the
> > > Branch Grid
> > > >> works. Can you explain to me a
> little bit
> > more ?
> > > >> |
> > > >
> > > > You have a link just next to it
> ("Branch
> > grid") on the
> > > wiki page.
> > > > Once on ci android page, click on
> filter
> > button (three
> > > bars, inverted
> > > > pyramid), and select
> > >
> aosp_cf_arm64_only_phone-trunk_staging-userdebug.
> > > > Then go to artifacts, and download
> image and
> > > cvd_host_x86_64 package, as
> > > > wiki mentions.
> > > >
> > > > Don't hesitate to ask more questions on
> > this. I imagine
> > > this topic might
> > > > interest some people who try to do the
> > same thing.
> > > >
> > > > Pierrick
> > > >
> > > >> |
> > > >> |
> > > >>
> > > >>
> > > >> On Mon, Sep 2, 2024 at 8:47 PM
> Pierrick
> > Bouvier
> > > >> <pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>
> > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>>
> > > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>
> > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>>>
> > > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>
> > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>>
> > > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>
> > <mailto:pierrick.bouvier@linaro.org
> <mailto:pierrick.bouvier@linaro.org>>>>> wrote:
> > > >>
> > > >> Hello Mario,
> > > >>
> > > >> very recently, I had to
> investigate
> > booting time of
> > > Android when using
> > > >> QEMU. You can probably manage to
> > boot this with
> > > only QEMU alone, but in
> > > >> my experience, using Cuttlefish
> > tooling is an
> > > easier approach.
> > > >>
> > > >> If you really want to use
> only QEMU,
> > you can use
> > > Cuttlefish to get
> > > >> exact
> > > >> command line used (which disk
> goes
> > where), and
> > > iterate from that.
> > > >>
> > > >> Instructions:
> > > >>
> > >
> >
> https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU> <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU>> <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU> <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU>>> <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU> <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU>> <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU> <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU <https://linaro.atlassian.net/wiki/spaces/QEMU/pages/29464068097/Run+Android+using+QEMU>>>>
> > > >>
> > > >> As you'll see, I could not get a
> > direct graphic
> > > output, but using
> > > >> scrcpy, it worked well for
> me. Hope
> > it can fit your
> > > use case.
> > > >>
> > > >> Regards,
> > > >> Pierrick
> > > >>
> > > >> On 9/2/24 06:49, Mario
> Marietto wrote:
> > > >> > Hello.
> > > >> >
> > > >> > I would like to emulate
> Android
> > 14 on my Ubuntu
> > > 24.04 OS X64 bit
> > > >> using
> > > >> > qemu-system-aarch64. I tried
> > using the following
> > > parameters :
> > > >> >
> > > >> > qemu-system-aarch64 \
> > > >> > -smp 4 \
> > > >> > -m 2048 \
> > > >> > -cpu cortex-a72 \
> > > >> > -M virt \
> > > >> > -device
> > virtio-gpu-pci,xres=1024,yres=768 \
> > > >> > -display sdl,gl=on \
> > > >> > -device usb-ehci \
> > > >> > -device usb-kbd \
> > > >> > -device
> virtio-tablet-pci \
> > > >> > -usb \
> > > >> > -serial stdio \
> > > >> > -kernel
> > > /mnt/zroot-133/_OS/Android/rpi4/Image \
> > > >> > -initrd
> > >
> /mnt/zroot-133/_OS/Android/rpi4/ramdisk.img \
> > > >> >     -drive
> > > >> >
> > > >>
> > >
> >
> index=0,if=none,id=system,file=/mnt/zroot-133/_OS/Android/rpi4/boot.img \
> > > >> > -device
> > virtio-blk-pci,drive=boot \
> > > >> >         -drive
> > > >> >
> > > >>
> > >
> >
> index=1,if=none,id=system,file=/mnt/zroot-133/_OS/Android/rpi4/system.img \
> > > >> > -device
> > virtio-blk-pci,drive=system \
> > > >> > -drive
> > > >> >
> > > >>
> > >
> >
> index=2,if=none,id=vendor,file=/mnt/zroot-133/_OS/Android/rpi4/vendor.img \
> > > >> > -device
> > virtio-blk-pci,drive=vendor \
> > > >> > -append "console=ttyAMA0,38400
> > drm.debug=0x0
> > > rootwait rootdelay=5
> > > >> > root=/dev/mmcblk0p2
> > androidboot.hardware=rpi4
> > > >> > androidboot.selinux=permissive
> > security=selinux
> > > selinux=1
> > > >> > androidboot.qemu.hw.mainkeys=0
> > > androidboot.lcd.density=160"
> > > >> >
> > > >> > The error I get in short is :
> > > >> >
> > > >> > [ 1.993668] init: bool
> > > >> >
> > > >>
> > >
> >
> android::init::BlockDevInitializer::InitDevices(std::set<std::string>):
> > > >> > partition(s) not found in
> /sys,
> > waiting for
> > > their uevent(s):
> > > >> mmcblk0p2,
> > > >> > mmcblk0p3
> > > >> >
> > > >> >
> > > >> > One user suggested to :
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> > Hi!!! The "/sys" is a "dynamic
> > fs" created at
> > > ram from the
> > > >> kernel, to
> > > >> > export a lot of
> things...so most
> > of the files
> > > only exist at runtime.
> > > >> > Normally, the partitions
> from the
> > block device
> > > have a symlink at
> > > >> > /sys/<something>/<...> that
> > points to /dev/
> > > block node. It seems
> > > >> that
> > > >> > there are no such files under
> > /sys according to
> > > what init is looking
> > > >> > for. You can double check
> this at
> > init source
> > > code to check the
> > > >> exact
> > > >> > path but I'm guessing that
> you'll
> > have to change
> > > the qemu arguments
> > > >> > regarding the block device.
> > > >> >
> > > >> > About userdata.img I think
> it's
> > normal since in
> > > the old days, the
> > > >> image
> > > >> > was a "empty sparse
> image", that
> > means, at the
> > > first flashing
> > > >> process,
> > > >> > there isn't userdata
> information,
> > we're just
> > > "flashing the
> > > >> partition"
> > > >> > with empty data.
> > > >> > Tks!!!
> > > >> >
> > > >> >
> > > >> >
> > > >> > So,in short I should
> change the
> > qemu arguments
> > > regarding the block
> > > >> > device. I tried in this way :
> > > >> >
> > > >> >
> > > >> > qemu-system-aarch64 \
> > > >> > -smp 4 \
> > > >> > -m 2048 \
> > > >> > -cpu cortex-a72 \
> > > >> > -M virt \
> > > >> > -device
> > virtio-gpu-pci,xres=1024,yres=768 \
> > > >> > -display sdl,gl=on \
> > > >> > -device usb-ehci \
> > > >> > -device usb-kbd \
> > > >> > -device
> virtio-tablet-pci \
> > > >> > -usb \
> > > >> > -serial stdio \
> > > >> > -kernel
> > > /mnt/zroot-133/_OS/Android/rpi4/Image \
> > > >> > -initrd
> > >
> /mnt/zroot-133/_OS/Android/rpi4/ramdisk.img \
> > > >> >         -hda
> > > /mnt/zroot-133/_OS/Android/rpi4/boot.img \
> > > >> > -hdb
> > >
> /mnt/zroot-133/_OS/Android/rpi4/system.img \
> > > >> > -hdc
> > >
> /mnt/zroot-133/_OS/Android/rpi4/vendor.img \
> > > >> > -append
> "console=ttyAMA0,38400
> > > drm.debug=0x0 rootwait
> > > >> rootdelay=5
> > > >> > root=/dev/mmcblk0p2
> > androidboot.hardware=rpi4
> > > >> > androidboot.selinux=permissive
> > security=selinux
> > > selinux=1
> > > >> > androidboot.qemu.hw.mainkeys=0
> > > androidboot.lcd.density=160"
> > > >> >
> > > >> >
> > > >> > but the error is still
> there. Do
> > you know some
> > > different alternative
> > > >> > block devices to try ? thanks.
> > > >> >
> > > >> >
> > > >> > --
> > > >> > Mario.
> > > >>
> > > >>
> > > >>
> > > >> --
> > > >> Mario.
> > >
> > >
> > >
> > > --
> > > Mario.
> > >
> > >
> > >
> > > --
> > > Mario.
> > >
> > >
> > >
> > > --
> > > Mario.
> >
> >
> >
> > --
> > Mario.
> >
> >
> >
> > --
> > Mario.
> >
> >
> >
> > --
> > Mario.
>
>
>
> --
> Mario.

--
Mario.

From:	Mario Marietto
Subject:	Re: Error : init: partition(s) not found in /sys, waiting for their uevent(s): mmcblk0p2, mmcblk0p3 while trying to emulate Android 14 on Ubuntu 24.04 X64 bit using qemu-system-aarch64.
Date:	Tue, 3 Sep 2024 22:52:13 +0200