I have a problem installing the windows balloon driver.
The installation succeeds.
it returned an error code 10 (Code 10 error).
I thought it could be a test-sign driver problem. So I enabled
test-signing mode and then tried to reinstall again.
I found the same error (PROB_FAILED_START).
Has anybody come accross such an error.
Any pointers shall be helpful. Do any body suggest to debug the driver ?.
I have the relevant setupapi.dev log : ( I have bold the relevant part of the log)
Also , I tried to built the package from github using Visual Studio 2012. I encounter the
same problem here too.
> [Device Install (UpdateDriverForPlugAndPlayDevices) - PCI\VEN_1AF4&DEV_1002&SUBSYS_00051AF4&REV_00]
>>> Section start 2013/07/31 07:37:39.025
cmd: devcon install BALLOON.INF "PCI\VEN_1AF4&DEV_1002&SUBSYS_00051AF4&REV_00"
dvi: Set selected driver complete.
dvi: {Build Driver List} 07:37:39.072
dvi: Searching for hardware ID(s):
dvi: pci\ven_1af4&dev_1002&subsys_00051af4&rev_00
cpy: Policy is set to make all digital signatures equal.
dvi: Processing a single INF: 'c:\users\ccma\balloon_driver\win8\amd64\balloon.inf'
inf: Opened INF: 'c:\users\ccma\balloon_driver\win8\amd64\balloon.inf' ([strings])
sig: {_VERIFY_FILE_SIGNATURE} 07:37:39.072
sig: Key = balloon.inf
sig: FilePath = c:\users\ccma\balloon_driver\win8\amd64\balloon.inf
sig: Catalog = c:\users\ccma\balloon_driver\win8\amd64\Balloon.cat
! sig: Verifying file against specific (valid) catalog failed! (0x80096002)
! sig: Error 0x80096002: The certificate for the signer of the message is invalid or not found.
sig: {_VERIFY_FILE_SIGNATURE exit(0x80096002)} 07:37:39.103
sig: {_VERIFY_FILE_SIGNATURE} 07:37:39.103
sig: Key = balloon.inf
sig: FilePath = c:\users\ccma\balloon_driver\win8\amd64\balloon.inf
sig: Catalog = c:\users\ccma\balloon_driver\win8\amd64\Balloon.cat
! sig: Verifying file against specific Authenticode(tm) catalog failed! (0x800b0100)
! sig: Error 0x800b0100: No signature was present in the subject.
sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0100)} 07:37:39.103
dvi: Created Driver Node:
dvi: HardwareID - PCI\VEN_1AF4&DEV_1002&SUBSYS_00051AF4&REV_00
dvi: InfName - c:\users\ccma\balloon_driver\win8\amd64\balloon.inf
dvi: DevDesc - VirtIO Balloon Driver
dvi: DrvDesc - VirtIO Balloon Driver
dvi: Provider - Red Hat Inc.
dvi: Mfg - VirtIO ballooning devices
dvi: ModelsSec - Standard.NTamd64
dvi: InstallSec - BALLOON_Device
dvi: ActualSec - BALLOON_Device.NT
dvi: Rank - 0x80ff0000
dvi: Signer - 未經過數位簽署
dvi: Signer Score - Not digitally signed
dvi: DrvDate - 06/19/2013
dvi: Version - 62.65.104.6500
dvi: {Build Driver List - exit(0x00000000)} 07:37:39.103
dvi: {DIF_SELECTBESTCOMPATDRV} 07:37:39.103
dvi: No class installer for '系統裝置'
dvi: Using exported function 'CriticalDeviceCoInstaller' in module 'C:\Windows\system32\SysClass.Dll'.
dvi: CoInstaller 1 == SysClass.Dll,CriticalDeviceCoInstaller
dvi: CoInstaller 1: Enter 07:37:39.103
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 07:37:39.103
dvi: {Select Best Driver}
dvi: Selected driver installs from section [BALLOON_Device] in 'c:\users\ccma\balloon_driver\win8\amd64\balloon.inf'.
dvi: Class GUID of device remains: {4d36e97d-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description - [VirtIO Balloon Driver]
dvi: InfFile - [c:\users\ccma\balloon_driver\win8\amd64\balloon.inf]
dvi: Section - [BALLOON_Device]
dvi: Signer - [未經過數位簽署]
dvi: Rank - [0x80ff0000]
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 07:37:39.119
inf: {SetupCopyOEMInf: c:\users\ccma\balloon_driver\win8\amd64\balloon.inf} 07:37:39.119
! inf: Package was already in store: skipping Driver Store add
inf: Driver Store location: C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf
inf: Published Inf Path: C:\Windows\INF\oem2.inf
inf: OEM source media location: c:\users\ccma\balloon_driver\win8\amd64\
inf: {SetupCopyOEMInf exit (0x00000000)} 07:37:39.571
dvi: Searching for hardware ID(s):
dvi: pci\ven_1af4&dev_1002&subsys_00051af4&rev_00
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf' ([strings])
sig: {_VERIFY_FILE_SIGNATURE} 07:37:39.571
sig: Key = balloon.inf
sig: FilePath = C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf
sig: Catalog = C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\Balloon.cat
! sig: Verifying file against specific (valid) catalog failed! (0x80096002)
! sig: Error 0x80096002: The certificate for the signer of the message is invalid or not found.
sig: {_VERIFY_FILE_SIGNATURE exit(0x80096002)} 07:37:39.571
sig: {_VERIFY_FILE_SIGNATURE} 07:37:39.571
sig: Key = balloon.inf
sig: FilePath = C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf
sig: Catalog = C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\Balloon.cat
! sig: Verifying file against specific Authenticode(tm) catalog failed! (0x800b0100)
! sig: Error 0x800b0100: No signature was present in the subject.
sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0100)} 07:37:39.571
dvi: Selected driver installs from section [BALLOON_Device] in 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf'.
dvi: Class GUID of device remains: {4d36e97d-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
dvi: {Plug and Play Service: Device Install for ROOT\SYSTEM\0001}
ump: Creating Install Process: DrvInst.exe 07:37:39.571
ndv: Infpath=C:\Windows\INF\oem2.inf
ndv: DriverNodeName=balloon.inf:Standard.NTamd64:BALLOON_Device:62.65.104.6500:pci\ven_1af4&dev_1002&subsys_00051af4&rev_00
ndv: DriverStorepath=C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf
ndv: Building driver list from driver node strong name...
dvi: Searching for hardware ID(s):
dvi: pci\ven_1af4&dev_1002&subsys_00051af4&rev_00
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf' ([strings])
sig: {_VERIFY_FILE_SIGNATURE} 07:37:39.587
sig: Key = balloon.inf
sig: FilePath = C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf
sig: Catalog = C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\Balloon.cat
! sig: Verifying file against specific (valid) catalog failed! (0x80096002)
! sig: Error 0x80096002: The certificate for the signer of the message is invalid or not found.
sig: {_VERIFY_FILE_SIGNATURE exit(0x80096002)} 07:37:39.618
sig: {_VERIFY_FILE_SIGNATURE} 07:37:39.618
sig: Key = balloon.inf
sig: FilePath = C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf
sig: Catalog = C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845\Balloon.cat
! sig: Verifying file against specific Authenticode(tm) catalog failed! (0x800b0100)
! sig: Error 0x800b0100: No signature was present in the subject.
sig: {_VERIFY_FILE_SIGNATURE exit(0x800b0100)} 07:37:39.618
dvi: Selected driver installs from section [BALLOON_Device] in 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf'.
dvi: Class GUID of device remains: {4d36e97d-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
ndv: {Core Device Install} 07:37:39.618
inf: Opened PNF: 'C:\Windows\INF\oem2.inf' ([strings])
dvi: {DIF_ALLOW_INSTALL} 07:37:39.618
dvi: No class installer for 'VirtIO Balloon Driver'
dvi: Using exported function 'CriticalDeviceCoInstaller' in module 'C:\Windows\system32\SysClass.Dll'.
dvi: CoInstaller 1 == SysClass.Dll,CriticalDeviceCoInstaller
dvi: CoInstaller 1: Enter 07:37:39.634
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 07:37:39.634
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 07:37:39.634
ndv: Installing files...
dvi: {DIF_INSTALLDEVICEFILES} 07:37:39.634
dvi: No class installer for 'VirtIO Balloon Driver'
dvi: CoInstaller 1: Enter 07:37:39.634
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 07:37:39.634
dvi: {Install FILES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf' ([strings])
inf: {Install Inf Section [BALLOON_Device.NT]}
inf: CopyFiles=Drivers_Dir (balloon.inf line 55)
cpy: Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
flq: QueueSingleCopy...
flq: Inf : 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf'
flq: SourceInf: 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf'
flq: SourceSection: [sourcedisksfiles]
flq: Source root path based on SourceInf
flq: SourceRootPath: 'C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845'
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: SourceRootPath - 'C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845'
flq: SourceFilename - 'BALLOON.sys'
flq: TargetDirectory- 'C:\Windows\system32\DRIVERS'
flq: TargetFilename - 'BALLOON.sys'
flq: SourceDesc - 'VirtIO Balloon Installation Disk #1'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY exit(0x00000000)}
inf: {Install Inf Section [BALLOON_Device.NT] exit (0x00000000)}
dvi: Processing co-installer registration section [BALLOON_Device.NT.CoInstallers].
inf: {Install Inf Section [BALLOON_Device.NT.CoInstallers]}
inf: CopyFiles=BALLOON_Device_CoInstaller_CopyFiles (balloon.inf line 90)
flq: QueueSingleCopy...
flq: Inf : 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf'
flq: SourceInf: 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf'
flq: SourceSection: [sourcedisksfiles]
flq: Source root path based on SourceInf
flq: SourceRootPath: 'C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845'
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x00000000
flq: SourceRootPath - 'C:\Windows\System32\DriverStore\FileRepository\balloon.inf_amd64_neutral_066401b21461d845'
flq: SourceFilename - 'WdfCoInstaller01011.dll'
flq: TargetDirectory- 'C:\Windows\system32'
flq: TargetFilename - 'WdfCoInstaller01011.dll'
flq: SourceDesc - 'VirtIO Balloon Installation Disk #1'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY exit(0x00000000)}
inf: {Install Inf Section [BALLOON_Device.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: {Install INTERFACES}
dvi: Installing section [BALLOON_Device.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: {Install FILES exit (0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 07:37:39.649
ndv: Pruning file queue...
dvi: {_SCAN_FILE_QUEUE}
flq: ScanQ flags=620
flq: SPQ_SCAN_PRUNE_COPY_QUEUE
flq: SPQ_SCAN_FILE_COMPARISON
flq: SPQ_SCAN_ACTIVATE_DRP
flq: ScanQ number of copy nodes=2
flq: File 'C:\Windows\system32\DRIVERS\BALLOON.sys' pruned from copy.
cpy: DrpSetRegFileProt 'C:\Windows\system32\DRIVERS\BALLOON.sys' Status=0 Class=OEM Legacy
flq: File 'C:\Windows\system32\WdfCoInstaller01011.dll' pruned from copy.
cpy: DrpSetRegFileProt 'C:\Windows\system32\WdfCoInstaller01011.dll' Status=0 Class=OEM Legacy
flq: ScanQ action="" DoPruning=32
flq: ScanQ end Validity flags=620 CopyNodes=0
dvi: {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
ndv: Committing file queue...
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=0
flq: CommitQ early exit: No nodes are queued
flq: {_commit_file_queue exit OK}
ndv: Registering CoInstallers...
dvi: {DIF_REGISTER_COINSTALLERS} 07:37:39.665
dvi: No class installer for 'VirtIO Balloon Driver'
dvi: CoInstaller 1: Enter 07:37:39.665
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 07:37:39.665
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf' ([strings])
inf: {Install Inf Section [BALLOON_Device.NT.CoInstallers]}
inf: AddReg=BALLOON_Device_CoInstaller_AddReg (balloon.inf line 89)
inf: {Install Inf Section [BALLOON_Device.NT.CoInstallers] exit (0x00000000)}
dvi: {DIF_DESTROYPRIVATEDATA} 07:37:39.665
dvi: CoInstaller 1: Enter 07:37:39.665
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 07:37:39.665
dvi: Default installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 07:37:39.665
dvi: Co-installers registered.
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 07:37:39.665
ndv: Installing interfaces...
dvi: {DIF_INSTALLINTERFACES} 07:37:39.665
dvi: No class installer for 'VirtIO Balloon Driver'
dvi: Using exported function 'CriticalDeviceCoInstaller' in module 'C:\Windows\system32\SysClass.Dll'.
dvi: CoInstaller 1 == SysClass.Dll,CriticalDeviceCoInstaller
dvi: Using exported function 'WdfCoInstaller' in module 'C:\Windows\system32\WdfCoInstaller01011.dll'.
dvi: CoInstaller 2 == WdfCoInstaller01011.dll,WdfCoInstaller
dvi: CoInstaller 1: Enter 07:37:39.680
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 07:37:39.680
dvi: CoInstaller 2: Exit
dvi: Default installer: Enter 07:37:39.680
dvi: {Install INTERFACES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf' ([strings])
dvi: Installing section [BALLOON_Device.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: Default installer: Exit
dvi: {DIF_INSTALLINTERFACES - exit(0x00000000)} 07:37:39.680
ndv: Installing device...
dvi: {DIF_INSTALLDEVICE} 07:37:39.680
dvi: No class installer for 'VirtIO Balloon Driver'
dvi: CoInstaller 1: Enter 07:37:39.680
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 07:37:39.680
inf: Opened PNF: 'C:\Windows\INF\oem2.inf' ([strings])
dvi: CoInstaller 2: Exit
dvi: Default installer: Enter 07:37:41.303
dvi: {Install DEVICE}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\balloon.inf_amd64_neutral_066401b21461d845\balloon.inf' ([strings])
dvi: Writing BASIC Logical Configurations...
inf: {Install Inf Section [BALLOON_Device.NT]}
inf: {Install Inf Section [BALLOON_Device.NT] exit (0x00000000)}
dvi: Processing Registry/Property directives...
inf: {Install Inf Section [BALLOON_Device.NT]}
inf: {Install Inf Section [BALLOON_Device.NT] exit (0x00000000)}
inf: {Install Inf Section [BALLOON_Device.NT.Hw]}
inf: Empty section
inf: {Install Inf Section [BALLOON_Device.NT.Hw] exit (0x00000000)}
dvi: {Writing Device Properties}
dvi: Provider name=Red Hat Inc.
dvi: DriverDate 06/19/2013
dvi: DriverVersion=62.65.104.6500
dvi: Class name=System
dvi: Manufacturer=VirtIO ballooning devices
dvi: Matching DeviceID=pci\ven_1af4&dev_1002&subsys_00051af4&rev_00
dvi: Strong Name=oem2.inf:Standard.NTamd64:BALLOON_Device:62.65.104.6500:pci\ven_1af4&dev_1002&subsys_00051af4&rev_00
dvi: {Writing Device Properties - Complete}
inf: {Install Inf Section [BALLOON_Device.NT.Services]}
inf: AddService=BALLOON,0x00000002,BALLOON_Service_Inst,BALLOON_Logging_Inst (balloon.inf line 63)
inf: ServiceType=1 (balloon.inf line 68)
inf: StartType=3 (balloon.inf line 69)
inf: ErrorControl=1 (balloon.inf line 70)
inf: ServiceBinary=C:\Windows\system32\DRIVERS\BALLOON.sys (balloon.inf line 71)
inf: DisplayName="VirtIO Balloon Service" (balloon.inf line 67)
inf: LoadOrderGroup="Extended Base" (balloon.inf line 72)
dvi: Add Service: Modified existing service 'BALLOON'.
inf: AddReg=BALLOON_Logging_Inst_AddReg (balloon.inf line 76)
inf: {Install Inf Section [BALLOON_Device.NT.Services] exit(0x00000000)}
dvi: Updated reflected section names for: oem2.inf
dvi: {Install DEVICE exit (0x00000000)}
dvi: Writing common driver property settings.
dvi: DriverDescription=VirtIO Balloon Driver
dvi: DeviceDisplayName=VirtIO Balloon Driver
dvi: Install Device: Restarting device. 07:37:48.666
dvi: Install Device: Restarting device completed. 07:37:49.134
!!! dvi: Device not started: Device has problem: 0x0a: CM_PROB_FAILED_START.
dvi: Default installer: Exit
dvi: CoInstaller 2: Enter (Post Processing) 07:37:49.150
dvi: CoInstaller 2: Exit (Post Processing)
dvi: CoInstaller 1: Enter (Post Processing) 07:37:52.613
dvi: CoInstaller 1: Exit (Post Processing)
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 07:37:52.613
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 07:37:52.613
dvi: No class installer for 'VirtIO Balloon Driver'
dvi: CoInstaller 1: Enter 07:37:52.628
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 07:37:52.628
dvi: CoInstaller 2: Exit
dvi: Default installer: Enter 07:37:52.628
dvi: Default installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0xe000020e)} 07:37:52.628
ndv: Device install status=0x00000000
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device has a PnP problem...
ndv: {Core Device Install - exit(0x00000000)} 07:37:52.628
dvi: {DIF_DESTROYPRIVATEDATA} 07:37:52.628
dvi: CoInstaller 1: Enter 07:37:52.628
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 07:37:52.628
dvi: CoInstaller 2: Exit
dvi: Default installer: Enter 07:37:52.628
dvi: Default installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 07:37:52.628
ump: Server install process exited with code 0x00000000 07:37:52.628
ump: {Plug and Play Service: Device Install exit(00000000)}
dvi: {DIF_DESTROYPRIVATEDATA} 07:37:52.628
dvi: CoInstaller 1: Enter 07:37:52.644
dvi: CoInstaller 1: Exit
dvi: Default installer: Enter 07:37:52.644
dvi: Default installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 07:37:52.644
dvi: {Build Driver List} 07:37:52.644
! dvi: Driver list already built
dvi: {Build Driver List - exit(0x00000000)} 07:37:52.644
dvi: {DIF_SELECTBESTCOMPATDRV} 07:37:52.644
dvi: No class installer for 'VirtIO Balloon Driver'
dvi: Using exported function 'CriticalDeviceCoInstaller' in module 'C:\Windows\system32\SysClass.Dll'.
dvi: CoInstaller 1 == SysClass.Dll,CriticalDeviceCoInstaller
dvi: Using exported function 'WdfCoInstaller' in module 'C:\Windows\system32\WdfCoInstaller01011.dll'.
dvi: CoInstaller 2 == WdfCoInstaller01011.dll,WdfCoInstaller
dvi: CoInstaller 1: Enter 07:37:52.644
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 07:37:52.644
dvi: CoInstaller 2: Exit
dvi: Default installer: Enter 07:37:52.644
dvi: {Select Best Driver}
dvi: Selected driver installs from section [BALLOON_Device] in 'c:\users\ccma\balloon_driver\win8\amd64\balloon.inf'.
dvi: Class GUID of device remains: {4d36e97d-e325-11ce-bfc1-08002be10318}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description - [VirtIO Balloon Driver]
dvi: InfFile - [c:\users\ccma\balloon_driver\win8\amd64\balloon.inf]
dvi: Section - [BALLOON_Device]
dvi: Signer - [未經過數位簽署]
dvi: Rank - [0x80ff0000]
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 07:37:52.644
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 07:37:52.644
dvi: No class installer for 'VirtIO Balloon Driver'
dvi: CoInstaller 1: Enter 07:37:52.644
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 07:37:52.644
dvi: CoInstaller 2: Exit
dvi: Default installer: Enter 07:37:52.644
dvi: Default installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0xe000020e)} 07:37:52.644
dvi: {DIF_DESTROYPRIVATEDATA} 07:37:52.660
dvi: CoInstaller 1: Enter 07:37:52.660
dvi: CoInstaller 1: Exit
dvi: CoInstaller 2: Enter 07:37:52.660
dvi: CoInstaller 2: Exit
dvi: Default installer: Enter 07:37:52.660
dvi: Default installer: Exit
dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 07:37:52.660
<<< Section end 2013/07/31 07:37:52.660
<<< [Exit status: SUCCESS]