[RFC PATCH v42 98/98] hw/sd/sdcard: Add boot config support

[Philippe Mathieu-Daudé]

From: Joel Stanley <joel@jms.id.au>

Introduced "boot-config" property to set CSD 179, the boot config
register.

With this correctly set we can use the enable bit to detect if
partition support is enabled.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/sd/sd.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index bbf054ea1e..b598974bbf 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -129,6 +129,7 @@ struct SDState {
     uint8_t spec_version;
     BlockBackend *blk;
     bool aspeed_emmc_kludge;
+    uint8_t boot_config;
 
     const SDProto *proto;
 
@@ -505,6 +506,8 @@ static void mmc_set_ext_csd(SDState *sd, uint64_t size)
     sd->ext_csd[159] = 0x00; /* Max enhanced area size */
     sd->ext_csd[158] = 0x00; /* ... */
     sd->ext_csd[157] = 0xEC; /* ... */
+
+    sd->ext_csd[EXT_CSD_PART_CONFIG] = sd->boot_config;
 }
 
 static void sd_emmc_set_csd(SDState *sd, uint64_t size)
@@ -1004,8 +1007,14 @@ static uint32_t sd_emmc_bootpart_offset(SDState *sd)
 {
     unsigned int access = sd->ext_csd[EXT_CSD_PART_CONFIG] &
         EXT_CSD_PART_CONFIG_ACC_MASK;
+    unsigned int enable = sd->ext_csd[EXT_CSD_PART_CONFIG] &
+         EXT_CSD_PART_CONFIG_EN_MASK;
     unsigned int boot_capacity = sd_boot_capacity_bytes(sd);
 
+    if (!enable) {
+        return 0;
+    }
+
     switch (access) {
     case EXT_CSD_PART_CONFIG_ACC_DEFAULT:
         return boot_capacity * 2;
@@ -2808,6 +2817,7 @@ static Property sd_properties[] = {
      * whether card should be in SSI or MMC/SD mode.  It is also up to the
      * board to ensure that ssi transfers only occur when the chip select
      * is asserted.  */
+    DEFINE_PROP_UINT8("boot-config", SDState, boot_config, 0x0),
     DEFINE_PROP_END_OF_LIST()
 };
 
-- 
2.41.0