[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH-for-9.1 v2 2/3] migration: Remove RDMA protocol handling
|
From: |
Philippe Mathieu-Daudé |
|
Subject: |
[PATCH-for-9.1 v2 2/3] migration: Remove RDMA protocol handling |
|
Date: |
Thu, 28 Mar 2024 14:02:54 +0100 |
The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.
Remove:
- RDMA handling from migration
- dependencies on libibumad, libibverbs and librdmacm
Keep the RAM_SAVE_FLAG_HOOK definition since it might appears
in old migration streams.
Cc: Peter Xu <peterx@redhat.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
MAINTAINERS | 7 -
docs/devel/migration/main.rst | 6 -
docs/rdma.txt | 420 --
docs/system/loongarch/virt.rst | 2 +-
meson.build | 23 -
qapi/migration.json | 31 +-
migration/migration-stats.h | 6 +-
migration/migration.h | 9 -
migration/options.h | 2 -
migration/rdma.h | 69 -
migration/migration-stats.c | 5 +-
migration/migration.c | 31 -
migration/options.c | 16 -
migration/qemu-file.c | 1 -
migration/ram.c | 86 +-
migration/rdma.c | 4184 -----------------
migration/savevm.c | 2 +-
meson_options.txt | 2 -
migration/meson.build | 1 -
migration/trace-events | 68 +-
qemu-options.hx | 3 -
.../org.centos/stream/8/build-environment.yml | 1 -
.../ci/org.centos/stream/8/x86_64/configure | 2 -
scripts/ci/setup/build-environment.yml | 4 -
scripts/coverity-scan/run-coverity-scan | 2 +-
scripts/meson-buildoptions.sh | 3 -
tests/lcitool/projects/qemu.yml | 3 -
tests/migration/guestperf/engine.py | 4 +-
28 files changed, 14 insertions(+), 4979 deletions(-)
delete mode 100644 docs/rdma.txt
delete mode 100644 migration/rdma.h
delete mode 100644 migration/rdma.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 91ab5235b8..05226cea0a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3426,13 +3426,6 @@ F: docs/devel/migration.rst
F: qapi/migration.json
F: tests/migration/
F: util/userfaultfd.c
-X: migration/rdma*
-
-RDMA Migration
-R: Li Zhijian <lizhijian@fujitsu.com>
-R: Peter Xu <peterx@redhat.com>
-S: Odd Fixes
-F: migration/rdma*
Migration dirty limit and dirty page rate
M: Hyman Huang <yong.huang@smartx.com>
diff --git a/docs/devel/migration/main.rst b/docs/devel/migration/main.rst
index 54385a23e5..70278ce1e3 100644
--- a/docs/devel/migration/main.rst
+++ b/docs/devel/migration/main.rst
@@ -47,12 +47,6 @@ over any transport.
QEMU interference. Note that QEMU does not flush cached file
data/metadata at the end of migration.
-In addition, support is included for migration using RDMA, which
-transports the page data using ``RDMA``, where the hardware takes care of
-transporting the pages, and the load on the CPU is much lower. While the
-internals of RDMA migration are a bit different, this isn't really visible
-outside the RAM migration code.
-
All these migration protocols use the same infrastructure to
save/restore state devices. This infrastructure is shared with the
savevm/loadvm functionality.
diff --git a/docs/rdma.txt b/docs/rdma.txt
deleted file mode 100644
index bd8dd799a9..0000000000
--- a/docs/rdma.txt
+++ /dev/null
@@ -1,420 +0,0 @@
-(RDMA: Remote Direct Memory Access)
-RDMA Live Migration Specification, Version # 1
-==============================================
-Wiki: https://wiki.qemu.org/Features/RDMALiveMigration
-Github: git@github.com:hinesmr/qemu.git, 'rdma' branch
-
-Copyright (C) 2013 Michael R. Hines <mrhines@us.ibm.com>
-
-An *exhaustive* paper (2010) shows additional performance details
-linked on the QEMU wiki above.
-
-Contents:
-=========
-* Introduction
-* Before running
-* Running
-* Performance
-* RDMA Migration Protocol Description
-* Versioning and Capabilities
-* QEMUFileRDMA Interface
-* Migration of VM's ram
-* Error handling
-* TODO
-
-Introduction:
-=============
-
-RDMA helps make your migration more deterministic under heavy load because
-of the significantly lower latency and higher throughput over TCP/IP. This is
-because the RDMA I/O architecture reduces the number of interrupts and
-data copies by bypassing the host networking stack. In particular, a TCP-based
-migration, under certain types of memory-bound workloads, may take a more
-unpredictable amount of time to complete the migration if the amount of
-memory tracked during each live migration iteration round cannot keep pace
-with the rate of dirty memory produced by the workload.
-
-RDMA currently comes in two flavors: both Ethernet based (RoCE, or RDMA
-over Converged Ethernet) as well as Infiniband-based. This implementation of
-migration using RDMA is capable of using both technologies because of
-the use of the OpenFabrics OFED software stack that abstracts out the
-programming model irrespective of the underlying hardware.
-
-Refer to openfabrics.org or your respective RDMA hardware vendor for
-an understanding on how to verify that you have the OFED software stack
-installed in your environment. You should be able to successfully link
-against the "librdmacm" and "libibverbs" libraries and development headers
-for a working build of QEMU to run successfully using RDMA Migration.
-
-BEFORE RUNNING:
-===============
-
-Use of RDMA during migration requires pinning and registering memory
-with the hardware. This means that memory must be physically resident
-before the hardware can transmit that memory to another machine.
-If this is not acceptable for your application or product, then the use
-of RDMA migration may in fact be harmful to co-located VMs or other
-software on the machine if there is not sufficient memory available to
-relocate the entire footprint of the virtual machine. If so, then the
-use of RDMA is discouraged and it is recommended to use standard TCP migration.
-
-Experimental: Next, decide if you want dynamic page registration.
-For example, if you have an 8GB RAM virtual machine, but only 1GB
-is in active use, then enabling this feature will cause all 8GB to
-be pinned and resident in memory. This feature mostly affects the
-bulk-phase round of the migration and can be enabled for extremely
-high-performance RDMA hardware using the following command:
-
-QEMU Monitor Command:
-$ migrate_set_capability rdma-pin-all on # disabled by default
-
-Performing this action will cause all 8GB to be pinned, so if that's
-not what you want, then please ignore this step altogether.
-
-On the other hand, this will also significantly speed up the bulk round
-of the migration, which can greatly reduce the "total" time of your migration.
-Example performance of this using an idle VM in the previous example
-can be found in the "Performance" section.
-
-Note: for very large virtual machines (hundreds of GBs), pinning all
-*all* of the memory of your virtual machine in the kernel is very expensive
-may extend the initial bulk iteration time by many seconds,
-and thus extending the total migration time. However, this will not
-affect the determinism or predictability of your migration you will
-still gain from the benefits of advanced pinning with RDMA.
-
-RUNNING:
-========
-
-First, set the migration speed to match your hardware's capabilities:
-
-QEMU Monitor Command:
-$ migrate_set_parameter max-bandwidth 40g # or whatever is the MAX of your
RDMA device
-
-Next, on the destination machine, add the following to the QEMU command line:
-
-qemu ..... -incoming rdma:host:port
-
-Finally, perform the actual migration on the source machine:
-
-QEMU Monitor Command:
-$ migrate -d rdma:host:port
-
-PERFORMANCE
-===========
-
-Here is a brief summary of total migration time and downtime using RDMA:
-Using a 40gbps infiniband link performing a worst-case stress test,
-using an 8GB RAM virtual machine:
-
-Using the following command:
-$ apt-get install stress
-$ stress --vm-bytes 7500M --vm 1 --vm-keep
-
-1. Migration throughput: 26 gigabits/second.
-2. Downtime (stop time) varies between 15 and 100 milliseconds.
-
-EFFECTS of memory registration on bulk phase round:
-
-For example, in the same 8GB RAM example with all 8GB of memory in
-active use and the VM itself is completely idle using the same 40 gbps
-infiniband link:
-
-1. rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
-2. rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps
-
-These numbers would of course scale up to whatever size virtual machine
-you have to migrate using RDMA.
-
-Enabling this feature does *not* have any measurable affect on
-migration *downtime*. This is because, without this feature, all of the
-memory will have already been registered already in advance during
-the bulk round and does not need to be re-registered during the successive
-iteration rounds.
-
-RDMA Protocol Description:
-==========================
-
-Migration with RDMA is separated into two parts:
-
-1. The transmission of the pages using RDMA
-2. Everything else (a control channel is introduced)
-
-"Everything else" is transmitted using a formal
-protocol now, consisting of infiniband SEND messages.
-
-An infiniband SEND message is the standard ibverbs
-message used by applications of infiniband hardware.
-The only difference between a SEND message and an RDMA
-message is that SEND messages cause notifications
-to be posted to the completion queue (CQ) on the
-infiniband receiver side, whereas RDMA messages (used
-for VM's ram) do not (to behave like an actual DMA).
-
-Messages in infiniband require two things:
-
-1. registration of the memory that will be transmitted
-2. (SEND only) work requests to be posted on both
- sides of the network before the actual transmission
- can occur.
-
-RDMA messages are much easier to deal with. Once the memory
-on the receiver side is registered and pinned, we're
-basically done. All that is required is for the sender
-side to start dumping bytes onto the link.
-
-(Memory is not released from pinning until the migration
-completes, given that RDMA migrations are very fast.)
-
-SEND messages require more coordination because the
-receiver must have reserved space (using a receive
-work request) on the receive queue (RQ) before QEMUFileRDMA
-can start using them to carry all the bytes as
-a control transport for migration of device state.
-
-To begin the migration, the initial connection setup is
-as follows (migration-rdma.c):
-
-1. Receiver and Sender are started (command line or libvirt):
-2. Both sides post two RQ work requests
-3. Receiver does listen()
-4. Sender does connect()
-5. Receiver accept()
-6. Check versioning and capabilities (described later)
-
-At this point, we define a control channel on top of SEND messages
-which is described by a formal protocol. Each SEND message has a
-header portion and a data portion (but together are transmitted
-as a single SEND message).
-
-Header:
- * Length (of the data portion, uint32, network byte order)
- * Type (what command to perform, uint32, network byte
order)
- * Repeat (Number of commands in data portion, same type only)
-
-The 'Repeat' field is here to support future multiple page registrations
-in a single message without any need to change the protocol itself
-so that the protocol is compatible against multiple versions of QEMU.
-Version #1 requires that all server implementations of the protocol must
-check this field and register all requests found in the array of commands
located
-in the data portion and return an equal number of results in the response.
-The maximum number of repeats is hard-coded to 4096. This is a conservative
-limit based on the maximum size of a SEND message along with empirical
-observations on the maximum future benefit of simultaneous page registrations.
-
-The 'type' field has 12 different command values:
- 1. Unused
- 2. Error (sent to the source during bad things)
- 3. Ready (control-channel is available)
- 4. QEMU File (for sending non-live device state)
- 5. RAM Blocks request (used right after connection setup)
- 6. RAM Blocks result (used right after connection setup)
- 7. Compress page (zap zero page and skip registration)
- 8. Register request (dynamic chunk registration)
- 9. Register result ('rkey' to be used by sender)
- 10. Register finished (registration for current iteration
finished)
- 11. Unregister request (unpin previously registered memory)
- 12. Unregister finished (confirmation that unpin completed)
-
-A single control message, as hinted above, can contain within the data
-portion an array of many commands of the same type. If there is more than
-one command, then the 'repeat' field will be greater than 1.
-
-After connection setup, message 5 & 6 are used to exchange ram block
-information and optionally pin all the memory if requested by the user.
-
-After ram block exchange is completed, we have two protocol-level
-functions, responsible for communicating control-channel commands
-using the above list of values:
-
-Logically:
-
-qemu_rdma_exchange_recv(header, expected command type)
-
-1. We transmit a READY command to let the sender know that
- we are *ready* to receive some data bytes on the control channel.
-2. Before attempting to receive the expected command, we post another
- RQ work request to replace the one we just used up.
-3. Block on a CQ event channel and wait for the SEND to arrive.
-4. When the send arrives, librdmacm will unblock us.
-5. Verify that the command-type and version received matches the one we
expected.
-
-qemu_rdma_exchange_send(header, data, optional response header & data):
-
-1. Block on the CQ event channel waiting for a READY command
- from the receiver to tell us that the receiver
- is *ready* for us to transmit some new bytes.
-2. Optionally: if we are expecting a response from the command
- (that we have not yet transmitted), let's post an RQ
- work request to receive that data a few moments later.
-3. When the READY arrives, librdmacm will
- unblock us and we immediately post a RQ work request
- to replace the one we just used up.
-4. Now, we can actually post the work request to SEND
- the requested command type of the header we were asked for.
-5. Optionally, if we are expecting a response (as before),
- we block again and wait for that response using the additional
- work request we previously posted. (This is used to carry
- 'Register result' commands #6 back to the sender which
- hold the rkey need to perform RDMA. Note that the virtual address
- corresponding to this rkey was already exchanged at the beginning
- of the connection (described below).
-
-All of the remaining command types (not including 'ready')
-described above all use the aforementioned two functions to do the hard work:
-
-1. After connection setup, RAMBlock information is exchanged using
- this protocol before the actual migration begins. This information includes
- a description of each RAMBlock on the server side as well as the virtual
addresses
- and lengths of each RAMBlock. This is used by the client to determine the
- start and stop locations of chunks and how to register them dynamically
- before performing the RDMA operations.
-2. During runtime, once a 'chunk' becomes full of pages ready to
- be sent with RDMA, the registration commands are used to ask the
- other side to register the memory for this chunk and respond
- with the result (rkey) of the registration.
-3. Also, the QEMUFile interfaces also call these functions (described below)
- when transmitting non-live state, such as devices or to send
- its own protocol information during the migration process.
-4. Finally, zero pages are only checked if a page has not yet been registered
- using chunk registration (or not checked at all and unconditionally
- written if chunk registration is disabled. This is accomplished using
- the "Compress" command listed above. If the page *has* been registered
- then we check the entire chunk for zero. Only if the entire chunk is
- zero, then we send a compress command to zap the page on the other side.
-
-Versioning and Capabilities
-===========================
-Current version of the protocol is version #1.
-
-The same version applies to both for protocol traffic and capabilities
-negotiation. (i.e. There is only one version number that is referred to
-by all communication).
-
-librdmacm provides the user with a 'private data' area to be exchanged
-at connection-setup time before any infiniband traffic is generated.
-
-Header:
- * Version (protocol version validated before send/recv occurs),
- uint32, network byte order
- * Flags (bitwise OR of each capability),
- uint32, network byte order
-
-There is no data portion of this header right now, so there is
-no length field. The maximum size of the 'private data' section
-is only 192 bytes per the Infiniband specification, so it's not
-very useful for data anyway. This structure needs to remain small.
-
-This private data area is a convenient place to check for protocol
-versioning because the user does not need to register memory to
-transmit a few bytes of version information.
-
-This is also a convenient place to negotiate capabilities
-(like dynamic page registration).
-
-If the version is invalid, we throw an error.
-
-If the version is new, we only negotiate the capabilities that the
-requested version is able to perform and ignore the rest.
-
-Currently there is only one capability in Version #1: dynamic page registration
-
-Finally: Negotiation happens with the Flags field: If the primary-VM
-sets a flag, but the destination does not support this capability, it
-will return a zero-bit for that flag and the primary-VM will understand
-that as not being an available capability and will thus disable that
-capability on the primary-VM side.
-
-QEMUFileRDMA Interface:
-=======================
-
-QEMUFileRDMA introduces a couple of new functions:
-
-1. qemu_rdma_get_buffer() (QEMUFileOps rdma_read_ops)
-2. qemu_rdma_put_buffer() (QEMUFileOps rdma_write_ops)
-
-These two functions are very short and simply use the protocol
-describe above to deliver bytes without changing the upper-level
-users of QEMUFile that depend on a bytestream abstraction.
-
-Finally, how do we handoff the actual bytes to get_buffer()?
-
-Again, because we're trying to "fake" a bytestream abstraction
-using an analogy not unlike individual UDP frames, we have
-to hold on to the bytes received from control-channel's SEND
-messages in memory.
-
-Each time we receive a complete "QEMU File" control-channel
-message, the bytes from SEND are copied into a small local holding area.
-
-Then, we return the number of bytes requested by get_buffer()
-and leave the remaining bytes in the holding area until get_buffer()
-comes around for another pass.
-
-If the buffer is empty, then we follow the same steps
-listed above and issue another "QEMU File" protocol command,
-asking for a new SEND message to re-fill the buffer.
-
-Migration of VM's ram:
-====================
-
-At the beginning of the migration, (migration-rdma.c),
-the sender and the receiver populate the list of RAMBlocks
-to be registered with each other into a structure.
-Then, using the aforementioned protocol, they exchange a
-description of these blocks with each other, to be used later
-during the iteration of main memory. This description includes
-a list of all the RAMBlocks, their offsets and lengths, virtual
-addresses and possibly includes pre-registered RDMA keys in case dynamic
-page registration was disabled on the server-side, otherwise not.
-
-Main memory is not migrated with the aforementioned protocol,
-but is instead migrated with normal RDMA Write operations.
-
-Pages are migrated in "chunks" (hard-coded to 1 Megabyte right now).
-Chunk size is not dynamic, but it could be in a future implementation.
-There's nothing to indicate that this is useful right now.
-
-When a chunk is full (or a flush() occurs), the memory backed by
-the chunk is registered with librdmacm is pinned in memory on
-both sides using the aforementioned protocol.
-After pinning, an RDMA Write is generated and transmitted
-for the entire chunk.
-
-Chunks are also transmitted in batches: This means that we
-do not request that the hardware signal the completion queue
-for the completion of *every* chunk. The current batch size
-is about 64 chunks (corresponding to 64 MB of memory).
-Only the last chunk in a batch must be signaled.
-This helps keep everything as asynchronous as possible
-and helps keep the hardware busy performing RDMA operations.
-
-Error-handling:
-===============
-
-Infiniband has what is called a "Reliable, Connected"
-link (one of 4 choices). This is the mode in which
-we use for RDMA migration.
-
-If a *single* message fails,
-the decision is to abort the migration entirely and
-cleanup all the RDMA descriptors and unregister all
-the memory.
-
-After cleanup, the Virtual Machine is returned to normal
-operation the same way that would happen if the TCP
-socket is broken during a non-RDMA based migration.
-
-TODO:
-=====
-1. Currently, 'ulimit -l' mlock() limits as well as cgroups swap limits
- are not compatible with infiniband memory pinning and will result in
- an aborted migration (but with the source VM left unaffected).
-2. Use of the recent /proc/<pid>/pagemap would likely speed up
- the use of KSM and ballooning while using RDMA.
-3. Also, some form of balloon-device usage tracking would also
- help alleviate some issues.
-4. Use LRU to provide more fine-grained direction of UNREGISTER
- requests for unpinning memory in an overcommitted environment.
-5. Expose UNREGISTER support to the user by way of workload-specific
- hints about application behavior.
diff --git a/docs/system/loongarch/virt.rst b/docs/system/loongarch/virt.rst
index 06d034b8ef..0a8e0766e4 100644
--- a/docs/system/loongarch/virt.rst
+++ b/docs/system/loongarch/virt.rst
@@ -39,7 +39,7 @@ can be accessed by following steps.
.. code-block:: bash
- ./configure --disable-rdma --prefix=/usr \
+ ./configure --prefix=/usr \
--target-list="loongarch64-softmmu" \
--disable-libiscsi --disable-libnfs --disable-libpmem \
--disable-glusterfs --enable-libusb --enable-usb-redir \
diff --git a/meson.build b/meson.build
index d6af3cd53a..bd65abad13 100644
--- a/meson.build
+++ b/meson.build
@@ -1854,21 +1854,6 @@ if numa.found() and not cc.links('''
endif
endif
-rdma = not_found
-if not get_option('rdma').auto() or have_system
- libumad = cc.find_library('ibumad', required: get_option('rdma'))
- rdma_libs = [cc.find_library('rdmacm', has_headers: ['rdma/rdma_cma.h'],
- required: get_option('rdma')),
- cc.find_library('ibverbs', required: get_option('rdma')),
- libumad]
- rdma = declare_dependency(dependencies: rdma_libs)
- foreach lib: rdma_libs
- if not lib.found()
- rdma = not_found
- endif
- endforeach
-endif
-
cacard = not_found
if not get_option('smartcard').auto() or have_system
cacard = dependency('libcacard', required: get_option('smartcard'),
@@ -2246,7 +2231,6 @@ endif
config_host_data.set('CONFIG_OPENGL', opengl.found())
config_host_data.set('CONFIG_PLUGIN', get_option('plugins'))
config_host_data.set('CONFIG_RBD', rbd.found())
-config_host_data.set('CONFIG_RDMA', rdma.found())
config_host_data.set('CONFIG_RELOCATABLE', get_option('relocatable'))
config_host_data.set('CONFIG_SAFESTACK', get_option('safe_stack'))
config_host_data.set('CONFIG_SDL', sdl.found())
@@ -2399,12 +2383,6 @@ if rbd.found()
dependencies: rbd,
prefix: '#include <rbd/librbd.h>'))
endif
-if rdma.found()
- config_host_data.set('HAVE_IBV_ADVISE_MR',
- cc.has_function('ibv_advise_mr',
- dependencies: rdma,
- prefix: '#include
<infiniband/verbs.h>'))
-endif
have_asan_fiber = false
if get_option('sanitizers') and \
@@ -4398,7 +4376,6 @@ summary_info += {'Multipath support': mpathpersist}
summary_info += {'Linux AIO support': libaio}
summary_info += {'Linux io_uring support': linux_io_uring}
summary_info += {'ATTR/XATTR support': libattr}
-summary_info += {'RDMA support': rdma}
summary_info += {'fdt support': fdt_opt == 'disabled' ? false : fdt_opt}
summary_info += {'libcap-ng support': libcap_ng}
summary_info += {'bpf support': libbpf}
diff --git a/qapi/migration.json b/qapi/migration.json
index 8c65b90328..9a56d403be 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -221,8 +221,8 @@
#
# @setup-time: amount of setup time in milliseconds *before* the
# iterations begin but *after* the QMP command is issued. This is
-# designed to provide an accounting of any activities (such as
-# RDMA pinning) which may be expensive, but do not actually occur
+# designed to provide an accounting of any activities which may be
+# expensive, but do not actually occur
# during the iterative migration rounds themselves. (since 1.6)
#
# @cpu-throttle-percentage: percentage of time guest cpus are being
@@ -430,10 +430,6 @@
# for certain work loads, by sending compressed difference of the
# pages
#
-# @rdma-pin-all: Controls whether or not the entire VM memory
-# footprint is mlock()'d on demand or all at once. Refer to
-# docs/rdma.txt for usage. Disabled by default. (since 2.0)
-#
# @zero-blocks: During storage migration encode blocks of zeroes
# efficiently. This essentially saves 1MB of zeroes per block on
# the wire. Enabling requires source and target VM to support
@@ -547,7 +543,7 @@
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
- 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
+ 'data': ['xbzrle', 'auto-converge', 'zero-blocks',
{ 'name': 'compress', 'features': [ 'deprecated' ] },
'events', 'postcopy-ram',
{ 'name': 'x-colo', 'features': [ 'unstable' ] },
@@ -606,7 +602,6 @@
# -> { "execute": "query-migrate-capabilities" }
# <- { "return": [
# {"state": false, "capability": "xbzrle"},
-# {"state": false, "capability": "rdma-pin-all"},
# {"state": false, "capability": "auto-converge"},
# {"state": false, "capability": "zero-blocks"},
# {"state": false, "capability": "compress"},
@@ -1654,14 +1649,12 @@
#
# @exec: Direct the migration stream to another process.
#
-# @rdma: Migrate via RDMA.
-#
# @file: Direct the migration stream to a file.
#
# Since: 8.2
##
{ 'enum': 'MigrationAddressType',
- 'data': [ 'socket', 'exec', 'rdma', 'file' ] }
+ 'data': [ 'socket', 'exec', 'file' ] }
##
# @FileMigrationArgs:
@@ -1701,7 +1694,6 @@
'data': {
'socket': 'SocketAddress',
'exec': 'MigrationExecCommand',
- 'rdma': 'InetSocketAddress',
'file': 'FileMigrationArgs' } }
##
@@ -1804,14 +1796,6 @@
# -> { "execute": "migrate",
# "arguments": {
# "channels": [ { "channel-type": "main",
-# "addr": { "transport": "rdma",
-# "host": "10.12.34.9",
-# "port": "1050" } } ] } }
-# <- { "return": {} }
-#
-# -> { "execute": "migrate",
-# "arguments": {
-# "channels": [ { "channel-type": "main",
# "addr": { "transport": "file",
# "filename": "/tmp/migfile",
# "offset": "0x1000" } } ] } }
@@ -1879,13 +1863,6 @@
# "/some/sock" ] } } ] } }
# <- { "return": {} }
#
-# -> { "execute": "migrate-incoming",
-# "arguments": {
-# "channels": [ { "channel-type": "main",
-# "addr": { "transport": "rdma",
-# "host": "10.12.34.9",
-# "port": "1050" } } ] } }
-# <- { "return": {} }
##
{ 'command': 'migrate-incoming',
'data': {'*uri': 'str',
diff --git a/migration/migration-stats.h b/migration/migration-stats.h
index 05290ade76..817c53559a 100644
--- a/migration/migration-stats.h
+++ b/migration/migration-stats.h
@@ -93,10 +93,6 @@ typedef struct {
* Maximum amount of data we can send in a cycle.
*/
Stat64 rate_limit_max;
- /*
- * Number of bytes sent through RDMA.
- */
- Stat64 rdma_bytes;
/*
* Number of pages transferred that were full of zeros.
*/
@@ -133,7 +129,7 @@ void migration_rate_set(uint64_t new_rate);
*
* Returns how many bytes have we transferred since the beginning of
* the migration. It accounts for bytes sent through any migration
- * channel, multifd, qemu_file, rdma, ....
+ * channel, multifd, qemu_file, ....
*/
uint64_t migration_transferred_bytes(void);
#endif
diff --git a/migration/migration.h b/migration/migration.h
index 8045e39c26..d097828580 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -162,13 +162,6 @@ struct MigrationIncomingState {
int state;
- /*
- * The incoming migration coroutine, non-NULL during qemu_loadvm_state().
- * Used to wake the migration incoming coroutine from rdma code. How much
is
- * it safe - it's a question.
- */
- Coroutine *loadvm_co;
-
/* The coroutine we should enter (back) after failover */
Coroutine *colo_incoming_co;
QemuSemaphore colo_incoming_sem;
@@ -463,8 +456,6 @@ struct MigrationState {
* switchover has been received.
*/
bool switchover_acked;
- /* Is this a rdma migration */
- bool rdma_migration;
};
void migrate_set_state(int *state, int old_state, int new_state);
diff --git a/migration/options.h b/migration/options.h
index ab8199e207..c00213973e 100644
--- a/migration/options.h
+++ b/migration/options.h
@@ -37,7 +37,6 @@ bool migrate_multifd(void);
bool migrate_pause_before_switchover(void);
bool migrate_postcopy_blocktime(void);
bool migrate_postcopy_preempt(void);
-bool migrate_rdma_pin_all(void);
bool migrate_release_ram(void);
bool migrate_return_path(void);
bool migrate_validate_uuid(void);
@@ -54,7 +53,6 @@ bool migrate_zero_copy_send(void);
bool migrate_multifd_flush_after_each_section(void);
bool migrate_postcopy(void);
-bool migrate_rdma(void);
bool migrate_tls(void);
/* capabilities helpers */
diff --git a/migration/rdma.h b/migration/rdma.h
deleted file mode 100644
index a8d27f33b8..0000000000
--- a/migration/rdma.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * RDMA protocol and interfaces
- *
- * Copyright IBM, Corp. 2010-2013
- * Copyright Red Hat, Inc. 2015-2016
- *
- * Authors:
- * Michael R. Hines <mrhines@us.ibm.com>
- * Jiuxing Liu <jl@us.ibm.com>
- * Daniel P. Berrange <berrange@redhat.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2 or
- * later. See the COPYING file in the top-level directory.
- *
- */
-
-#include "qemu/sockets.h"
-
-#ifndef QEMU_MIGRATION_RDMA_H
-#define QEMU_MIGRATION_RDMA_H
-
-#include "exec/memory.h"
-
-void rdma_start_outgoing_migration(void *opaque, InetSocketAddress *host_port,
- Error **errp);
-
-void rdma_start_incoming_migration(InetSocketAddress *host_port, Error **errp);
-
-/*
- * Constants used by rdma return codes
- */
-#define RAM_CONTROL_SETUP 0
-#define RAM_CONTROL_ROUND 1
-#define RAM_CONTROL_FINISH 3
-
-/*
- * Whenever this is found in the data stream, the flags
- * will be passed to rdma functions in the incoming-migration
- * side.
- */
-#define RAM_SAVE_FLAG_HOOK 0x80
-
-#define RAM_SAVE_CONTROL_NOT_SUPP -1000
-#define RAM_SAVE_CONTROL_DELAYED -2000
-
-#ifdef CONFIG_RDMA
-int rdma_registration_handle(QEMUFile *f);
-int rdma_registration_start(QEMUFile *f, uint64_t flags);
-int rdma_registration_stop(QEMUFile *f, uint64_t flags);
-int rdma_block_notification_handle(QEMUFile *f, const char *name);
-int rdma_control_save_page(QEMUFile *f, ram_addr_t block_offset,
- ram_addr_t offset, size_t size);
-#else
-static inline
-int rdma_registration_handle(QEMUFile *f) { return 0; }
-static inline
-int rdma_registration_start(QEMUFile *f, uint64_t flags) { return 0; }
-static inline
-int rdma_registration_stop(QEMUFile *f, uint64_t flags) { return 0; }
-static inline
-int rdma_block_notification_handle(QEMUFile *f, const char *name) { return 0; }
-static inline
-int rdma_control_save_page(QEMUFile *f, ram_addr_t block_offset,
- ram_addr_t offset, size_t size)
-{
- return RAM_SAVE_CONTROL_NOT_SUPP;
-}
-#endif
-#endif
diff --git a/migration/migration-stats.c b/migration/migration-stats.c
index f690b98a03..9bc8d7018f 100644
--- a/migration/migration-stats.c
+++ b/migration/migration-stats.c
@@ -62,9 +62,8 @@ void migration_rate_reset(void)
uint64_t migration_transferred_bytes(void)
{
uint64_t multifd = stat64_get(&mig_stats.multifd_bytes);
- uint64_t rdma = stat64_get(&mig_stats.rdma_bytes);
uint64_t qemu_file = stat64_get(&mig_stats.qemu_file_transferred);
- trace_migration_transferred_bytes(qemu_file, multifd, rdma);
- return qemu_file + multifd + rdma;
+ trace_migration_transferred_bytes(qemu_file, multifd);
+ return qemu_file + multifd;
}
diff --git a/migration/migration.c b/migration/migration.c
index 9fe8fd2afd..8e17914c8b 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -25,7 +25,6 @@
#include "sysemu/runstate.h"
#include "sysemu/sysemu.h"
#include "sysemu/cpu-throttle.h"
-#include "rdma.h"
#include "ram.h"
#include "ram-compress.h"
#include "migration/global_state.h"
@@ -545,7 +544,6 @@ bool migrate_uri_parse(const char *uri, MigrationChannel
**channel,
{
g_autoptr(MigrationChannel) val = g_new0(MigrationChannel, 1);
g_autoptr(MigrationAddress) addr = g_new0(MigrationAddress, 1);
- InetSocketAddress *isock = &addr->u.rdma;
strList **tail = &addr->u.exec.args;
if (strstart(uri, "exec:", NULL)) {
@@ -558,12 +556,6 @@ bool migrate_uri_parse(const char *uri, MigrationChannel
**channel,
QAPI_LIST_APPEND(tail, g_strdup("-c"));
#endif
QAPI_LIST_APPEND(tail, g_strdup(uri + strlen("exec:")));
- } else if (strstart(uri, "rdma:", NULL)) {
- if (inet_parse(isock, uri + strlen("rdma:"), errp)) {
- qapi_free_InetSocketAddress(isock);
- return false;
- }
- addr->transport = MIGRATION_ADDRESS_TYPE_RDMA;
} else if (strstart(uri, "tcp:", NULL) ||
strstart(uri, "unix:", NULL) ||
strstart(uri, "vsock:", NULL) ||
@@ -645,22 +637,6 @@ static void qemu_start_incoming_migration(const char *uri,
bool has_channels,
} else if (saddr->type == SOCKET_ADDRESS_TYPE_FD) {
fd_start_incoming_migration(saddr->u.fd.str, errp);
}
-#ifdef CONFIG_RDMA
- } else if (addr->transport == MIGRATION_ADDRESS_TYPE_RDMA) {
- if (migrate_compress()) {
- error_setg(errp, "RDMA and compression can't be used together");
- return;
- }
- if (migrate_xbzrle()) {
- error_setg(errp, "RDMA and XBZRLE can't be used together");
- return;
- }
- if (migrate_multifd()) {
- error_setg(errp, "RDMA and multifd can't be used together");
- return;
- }
- rdma_start_incoming_migration(&addr->u.rdma, errp);
-#endif
} else if (addr->transport == MIGRATION_ADDRESS_TYPE_EXEC) {
exec_start_incoming_migration(addr->u.exec.args, errp);
} else if (addr->transport == MIGRATION_ADDRESS_TYPE_FILE) {
@@ -751,9 +727,7 @@ process_incoming_migration_co(void *opaque)
migrate_set_state(&mis->state, MIGRATION_STATUS_SETUP,
MIGRATION_STATUS_ACTIVE);
- mis->loadvm_co = qemu_coroutine_self();
ret = qemu_loadvm_state(mis->from_src_file);
- mis->loadvm_co = NULL;
trace_vmstate_downtime_checkpoint("dst-precopy-loadvm-completed");
@@ -1679,7 +1653,6 @@ int migrate_init(MigrationState *s, Error **errp)
s->iteration_initial_bytes = 0;
s->threshold_size = 0;
s->switchover_acked = false;
- s->rdma_migration = false;
/*
* set mig_stats memory to zero for a new migration
*/
@@ -2100,10 +2073,6 @@ void qmp_migrate(const char *uri, bool has_channels,
} else if (saddr->type == SOCKET_ADDRESS_TYPE_FD) {
fd_start_outgoing_migration(s, saddr->u.fd.str, &local_err);
}
-#ifdef CONFIG_RDMA
- } else if (addr->transport == MIGRATION_ADDRESS_TYPE_RDMA) {
- rdma_start_outgoing_migration(s, &addr->u.rdma, &local_err);
-#endif
} else if (addr->transport == MIGRATION_ADDRESS_TYPE_EXEC) {
exec_start_outgoing_migration(s, addr->u.exec.args, &local_err);
} else if (addr->transport == MIGRATION_ADDRESS_TYPE_FILE) {
diff --git a/migration/options.c b/migration/options.c
index bfd7753b69..02fc0b9ae8 100644
--- a/migration/options.c
+++ b/migration/options.c
@@ -185,7 +185,6 @@ Property migration_properties[] = {
/* Migration capabilities */
DEFINE_PROP_MIG_CAP("x-xbzrle", MIGRATION_CAPABILITY_XBZRLE),
- DEFINE_PROP_MIG_CAP("x-rdma-pin-all", MIGRATION_CAPABILITY_RDMA_PIN_ALL),
DEFINE_PROP_MIG_CAP("x-auto-converge", MIGRATION_CAPABILITY_AUTO_CONVERGE),
DEFINE_PROP_MIG_CAP("x-zero-blocks", MIGRATION_CAPABILITY_ZERO_BLOCKS),
DEFINE_PROP_MIG_CAP("x-compress", MIGRATION_CAPABILITY_COMPRESS),
@@ -323,13 +322,6 @@ bool migrate_postcopy_ram(void)
return s->capabilities[MIGRATION_CAPABILITY_POSTCOPY_RAM];
}
-bool migrate_rdma_pin_all(void)
-{
- MigrationState *s = migrate_get_current();
-
- return s->capabilities[MIGRATION_CAPABILITY_RDMA_PIN_ALL];
-}
-
bool migrate_release_ram(void)
{
MigrationState *s = migrate_get_current();
@@ -393,13 +385,6 @@ bool migrate_postcopy(void)
return migrate_postcopy_ram() || migrate_dirty_bitmaps();
}
-bool migrate_rdma(void)
-{
- MigrationState *s = migrate_get_current();
-
- return s->rdma_migration;
-}
-
bool migrate_tls(void)
{
MigrationState *s = migrate_get_current();
@@ -458,7 +443,6 @@ INITIALIZE_MIGRATE_CAPS_SET(check_caps_background_snapshot,
MIGRATION_CAPABILITY_PAUSE_BEFORE_SWITCHOVER,
MIGRATION_CAPABILITY_AUTO_CONVERGE,
MIGRATION_CAPABILITY_RELEASE_RAM,
- MIGRATION_CAPABILITY_RDMA_PIN_ALL,
MIGRATION_CAPABILITY_COMPRESS,
MIGRATION_CAPABILITY_XBZRLE,
MIGRATION_CAPABILITY_X_COLO,
diff --git a/migration/qemu-file.c b/migration/qemu-file.c
index a10882d47f..ad2efb332e 100644
--- a/migration/qemu-file.c
+++ b/migration/qemu-file.c
@@ -32,7 +32,6 @@
#include "trace.h"
#include "options.h"
#include "qapi/error.h"
-#include "rdma.h"
#include "io/channel-file.h"
#define IO_BUF_SIZE 32768
diff --git a/migration/ram.c b/migration/ram.c
index 8deb84984f..c81c8a7cff 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -59,7 +59,6 @@
#include "qemu/iov.h"
#include "multifd.h"
#include "sysemu/runstate.h"
-#include "rdma.h"
#include "options.h"
#include "sysemu/dirtylimit.h"
#include "sysemu/kvm.h"
@@ -89,7 +88,7 @@
#define RAM_SAVE_FLAG_EOS 0x10
#define RAM_SAVE_FLAG_CONTINUE 0x20
#define RAM_SAVE_FLAG_XBZRLE 0x40
-/* 0x80 is reserved in rdma.h for RAM_SAVE_FLAG_HOOK */
+#define RAM_SAVE_FLAG_HOOK 0x80 /* was reserved by RDMA */
#define RAM_SAVE_FLAG_COMPRESS_PAGE 0x100
#define RAM_SAVE_FLAG_MULTIFD_FLUSH 0x200
/* We can't use any flag that is bigger than 0x200 */
@@ -1175,32 +1174,6 @@ static int save_zero_page(RAMState *rs, PageSearchStatus
*pss,
return len;
}
-/*
- * @pages: the number of pages written by the control path,
- * < 0 - error
- * > 0 - number of pages written
- *
- * Return true if the pages has been saved, otherwise false is returned.
- */
-static bool control_save_page(PageSearchStatus *pss,
- ram_addr_t offset, int *pages)
-{
- int ret;
-
- ret = rdma_control_save_page(pss->pss_channel, pss->block->offset, offset,
- TARGET_PAGE_SIZE);
- if (ret == RAM_SAVE_CONTROL_NOT_SUPP) {
- return false;
- }
-
- if (ret == RAM_SAVE_CONTROL_DELAYED) {
- *pages = 1;
- return true;
- }
- *pages = ret;
- return true;
-}
-
/*
* directly send the page to the stream
*
@@ -2080,11 +2053,6 @@ static bool save_compress_page(RAMState *rs,
PageSearchStatus *pss,
static int ram_save_target_page_legacy(RAMState *rs, PageSearchStatus *pss)
{
ram_addr_t offset = ((ram_addr_t)pss->page) << TARGET_PAGE_BITS;
- int res;
-
- if (control_save_page(pss, offset, &res)) {
- return res;
- }
if (save_compress_page(rs, pss, offset)) {
return 1;
@@ -3114,18 +3082,6 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
}
}
- ret = rdma_registration_start(f, RAM_CONTROL_SETUP);
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- return ret;
- }
-
- ret = rdma_registration_stop(f, RAM_CONTROL_SETUP);
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- return ret;
- }
-
migration_ops = g_malloc0(sizeof(MigrationOps));
if (migrate_multifd()) {
@@ -3221,12 +3177,6 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
/* Read version before ram_list.blocks */
smp_rmb();
- ret = rdma_registration_start(f, RAM_CONTROL_ROUND);
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- goto out;
- }
-
t0 = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
i = 0;
while ((ret = migration_rate_exceeded(f)) == 0 ||
@@ -3278,15 +3228,6 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
}
}
- /*
- * Must occur before EOS (or any QEMUFile operation)
- * because of RDMA protocol.
- */
- ret = rdma_registration_stop(f, RAM_CONTROL_ROUND);
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- }
-
out:
if (ret >= 0
&& migration_is_setup_or_active()) {
@@ -3332,12 +3273,6 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
migration_bitmap_sync_precopy(rs, true);
}
- ret = rdma_registration_start(f, RAM_CONTROL_FINISH);
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- return ret;
- }
-
/* try transferring iterative blocks of memory */
/* flush all remaining blocks regardless of rate limiting */
@@ -3358,12 +3293,6 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
qemu_mutex_unlock(&rs->bitmap_mutex);
compress_flush_data();
-
- ret = rdma_registration_stop(f, RAM_CONTROL_FINISH);
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- return ret;
- }
}
ret = multifd_send_sync_main();
@@ -3576,8 +3505,7 @@ static inline void *colo_cache_from_block_offset(RAMBlock
*block,
/**
* ram_handle_zero: handle the zero page case
*
- * If a page (or a whole RDMA chunk) has been
- * determined to be zero, then zap it.
+ * If a page has been determined to be zero, then zap it.
*
* @host: host address for the zero page
* @ch: what the page is filled from. We only support zero
@@ -4161,10 +4089,6 @@ static int parse_ramblock(QEMUFile *f, RAMBlock *block,
ram_addr_t length)
return -EINVAL;
}
}
- ret = rdma_block_notification_handle(f, block->idstr);
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- }
return ret;
}
@@ -4363,12 +4287,6 @@ static int ram_load_precopy(QEMUFile *f)
multifd_recv_sync_main();
}
break;
- case RAM_SAVE_FLAG_HOOK:
- ret = rdma_registration_handle(f);
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- }
- break;
default:
error_report("Unknown combination of migration flags: 0x%x",
flags);
ret = -EINVAL;
diff --git a/migration/rdma.c b/migration/rdma.c
deleted file mode 100644
index 855753c671..0000000000
--- a/migration/rdma.c
+++ /dev/null
@@ -1,4184 +0,0 @@
-/*
- * RDMA protocol and interfaces
- *
- * Copyright IBM, Corp. 2010-2013
- * Copyright Red Hat, Inc. 2015-2016
- *
- * Authors:
- * Michael R. Hines <mrhines@us.ibm.com>
- * Jiuxing Liu <jl@us.ibm.com>
- * Daniel P. Berrange <berrange@redhat.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2 or
- * later. See the COPYING file in the top-level directory.
- *
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "qemu/cutils.h"
-#include "exec/target_page.h"
-#include "rdma.h"
-#include "migration.h"
-#include "migration-stats.h"
-#include "qemu-file.h"
-#include "ram.h"
-#include "qemu/error-report.h"
-#include "qemu/main-loop.h"
-#include "qemu/module.h"
-#include "qemu/rcu.h"
-#include "qemu/sockets.h"
-#include "qemu/bitmap.h"
-#include "qemu/coroutine.h"
-#include "exec/memory.h"
-#include <sys/socket.h>
-#include <netdb.h>
-#include <arpa/inet.h>
-#include <rdma/rdma_cma.h>
-#include "trace.h"
-#include "qom/object.h"
-#include "options.h"
-#include <poll.h>
-
-#define RDMA_RESOLVE_TIMEOUT_MS 10000
-
-/* Do not merge data if larger than this. */
-#define RDMA_MERGE_MAX (2 * 1024 * 1024)
-#define RDMA_SIGNALED_SEND_MAX (RDMA_MERGE_MAX / 4096)
-
-#define RDMA_REG_CHUNK_SHIFT 20 /* 1 MB */
-
-/*
- * This is only for non-live state being migrated.
- * Instead of RDMA_WRITE messages, we use RDMA_SEND
- * messages for that state, which requires a different
- * delivery design than main memory.
- */
-#define RDMA_SEND_INCREMENT 32768
-
-/*
- * Maximum size infiniband SEND message
- */
-#define RDMA_CONTROL_MAX_BUFFER (512 * 1024)
-#define RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE 4096
-
-#define RDMA_CONTROL_VERSION_CURRENT 1
-/*
- * Capabilities for negotiation.
- */
-#define RDMA_CAPABILITY_PIN_ALL 0x01
-
-/*
- * Add the other flags above to this list of known capabilities
- * as they are introduced.
- */
-static uint32_t known_capabilities = RDMA_CAPABILITY_PIN_ALL;
-
-/*
- * A work request ID is 64-bits and we split up these bits
- * into 3 parts:
- *
- * bits 0-15 : type of control message, 2^16
- * bits 16-29: ram block index, 2^14
- * bits 30-63: ram block chunk number, 2^34
- *
- * The last two bit ranges are only used for RDMA writes,
- * in order to track their completion and potentially
- * also track unregistration status of the message.
- */
-#define RDMA_WRID_TYPE_SHIFT 0UL
-#define RDMA_WRID_BLOCK_SHIFT 16UL
-#define RDMA_WRID_CHUNK_SHIFT 30UL
-
-#define RDMA_WRID_TYPE_MASK \
- ((1UL << RDMA_WRID_BLOCK_SHIFT) - 1UL)
-
-#define RDMA_WRID_BLOCK_MASK \
- (~RDMA_WRID_TYPE_MASK & ((1UL << RDMA_WRID_CHUNK_SHIFT) - 1UL))
-
-#define RDMA_WRID_CHUNK_MASK (~RDMA_WRID_BLOCK_MASK & ~RDMA_WRID_TYPE_MASK)
-
-/*
- * RDMA migration protocol:
- * 1. RDMA Writes (data messages, i.e. RAM)
- * 2. IB Send/Recv (control channel messages)
- */
-enum {
- RDMA_WRID_NONE = 0,
- RDMA_WRID_RDMA_WRITE = 1,
- RDMA_WRID_SEND_CONTROL = 2000,
- RDMA_WRID_RECV_CONTROL = 4000,
-};
-
-/*
- * Work request IDs for IB SEND messages only (not RDMA writes).
- * This is used by the migration protocol to transmit
- * control messages (such as device state and registration commands)
- *
- * We could use more WRs, but we have enough for now.
- */
-enum {
- RDMA_WRID_READY = 0,
- RDMA_WRID_DATA,
- RDMA_WRID_CONTROL,
- RDMA_WRID_MAX,
-};
-
-/*
- * SEND/RECV IB Control Messages.
- */
-enum {
- RDMA_CONTROL_NONE = 0,
- RDMA_CONTROL_ERROR,
- RDMA_CONTROL_READY, /* ready to receive */
- RDMA_CONTROL_QEMU_FILE, /* QEMUFile-transmitted bytes */
- RDMA_CONTROL_RAM_BLOCKS_REQUEST, /* RAMBlock synchronization */
- RDMA_CONTROL_RAM_BLOCKS_RESULT, /* RAMBlock synchronization */
- RDMA_CONTROL_COMPRESS, /* page contains repeat values */
- RDMA_CONTROL_REGISTER_REQUEST, /* dynamic page registration */
- RDMA_CONTROL_REGISTER_RESULT, /* key to use after registration */
- RDMA_CONTROL_REGISTER_FINISHED, /* current iteration finished */
- RDMA_CONTROL_UNREGISTER_REQUEST, /* dynamic UN-registration */
- RDMA_CONTROL_UNREGISTER_FINISHED, /* unpinning finished */
-};
-
-
-/*
- * Memory and MR structures used to represent an IB Send/Recv work request.
- * This is *not* used for RDMA writes, only IB Send/Recv.
- */
-typedef struct {
- uint8_t control[RDMA_CONTROL_MAX_BUFFER]; /* actual buffer to register */
- struct ibv_mr *control_mr; /* registration metadata */
- size_t control_len; /* length of the message */
- uint8_t *control_curr; /* start of unconsumed bytes */
-} RDMAWorkRequestData;
-
-/*
- * Negotiate RDMA capabilities during connection-setup time.
- */
-typedef struct {
- uint32_t version;
- uint32_t flags;
-} RDMACapabilities;
-
-static void caps_to_network(RDMACapabilities *cap)
-{
- cap->version = htonl(cap->version);
- cap->flags = htonl(cap->flags);
-}
-
-static void network_to_caps(RDMACapabilities *cap)
-{
- cap->version = ntohl(cap->version);
- cap->flags = ntohl(cap->flags);
-}
-
-/*
- * Representation of a RAMBlock from an RDMA perspective.
- * This is not transmitted, only local.
- * This and subsequent structures cannot be linked lists
- * because we're using a single IB message to transmit
- * the information. It's small anyway, so a list is overkill.
- */
-typedef struct RDMALocalBlock {
- char *block_name;
- uint8_t *local_host_addr; /* local virtual address */
- uint64_t remote_host_addr; /* remote virtual address */
- uint64_t offset;
- uint64_t length;
- struct ibv_mr **pmr; /* MRs for chunk-level registration */
- struct ibv_mr *mr; /* MR for non-chunk-level registration */
- uint32_t *remote_keys; /* rkeys for chunk-level registration */
- uint32_t remote_rkey; /* rkeys for non-chunk-level registration
*/
- int index; /* which block are we */
- unsigned int src_index; /* (Only used on dest) */
- bool is_ram_block;
- int nb_chunks;
- unsigned long *transit_bitmap;
- unsigned long *unregister_bitmap;
-} RDMALocalBlock;
-
-/*
- * Also represents a RAMblock, but only on the dest.
- * This gets transmitted by the dest during connection-time
- * to the source VM and then is used to populate the
- * corresponding RDMALocalBlock with
- * the information needed to perform the actual RDMA.
- */
-typedef struct QEMU_PACKED RDMADestBlock {
- uint64_t remote_host_addr;
- uint64_t offset;
- uint64_t length;
- uint32_t remote_rkey;
- uint32_t padding;
-} RDMADestBlock;
-
-static const char *control_desc(unsigned int rdma_control)
-{
- static const char *strs[] = {
- [RDMA_CONTROL_NONE] = "NONE",
- [RDMA_CONTROL_ERROR] = "ERROR",
- [RDMA_CONTROL_READY] = "READY",
- [RDMA_CONTROL_QEMU_FILE] = "QEMU FILE",
- [RDMA_CONTROL_RAM_BLOCKS_REQUEST] = "RAM BLOCKS REQUEST",
- [RDMA_CONTROL_RAM_BLOCKS_RESULT] = "RAM BLOCKS RESULT",
- [RDMA_CONTROL_COMPRESS] = "COMPRESS",
- [RDMA_CONTROL_REGISTER_REQUEST] = "REGISTER REQUEST",
- [RDMA_CONTROL_REGISTER_RESULT] = "REGISTER RESULT",
- [RDMA_CONTROL_REGISTER_FINISHED] = "REGISTER FINISHED",
- [RDMA_CONTROL_UNREGISTER_REQUEST] = "UNREGISTER REQUEST",
- [RDMA_CONTROL_UNREGISTER_FINISHED] = "UNREGISTER FINISHED",
- };
-
- if (rdma_control > RDMA_CONTROL_UNREGISTER_FINISHED) {
- return "??BAD CONTROL VALUE??";
- }
-
- return strs[rdma_control];
-}
-
-#if !defined(htonll)
-static uint64_t htonll(uint64_t v)
-{
- union { uint32_t lv[2]; uint64_t llv; } u;
- u.lv[0] = htonl(v >> 32);
- u.lv[1] = htonl(v & 0xFFFFFFFFULL);
- return u.llv;
-}
-#endif
-
-#if !defined(ntohll)
-static uint64_t ntohll(uint64_t v)
-{
- union { uint32_t lv[2]; uint64_t llv; } u;
- u.llv = v;
- return ((uint64_t)ntohl(u.lv[0]) << 32) | (uint64_t) ntohl(u.lv[1]);
-}
-#endif
-
-static void dest_block_to_network(RDMADestBlock *db)
-{
- db->remote_host_addr = htonll(db->remote_host_addr);
- db->offset = htonll(db->offset);
- db->length = htonll(db->length);
- db->remote_rkey = htonl(db->remote_rkey);
-}
-
-static void network_to_dest_block(RDMADestBlock *db)
-{
- db->remote_host_addr = ntohll(db->remote_host_addr);
- db->offset = ntohll(db->offset);
- db->length = ntohll(db->length);
- db->remote_rkey = ntohl(db->remote_rkey);
-}
-
-/*
- * Virtual address of the above structures used for transmitting
- * the RAMBlock descriptions at connection-time.
- * This structure is *not* transmitted.
- */
-typedef struct RDMALocalBlocks {
- int nb_blocks;
- bool init; /* main memory init complete */
- RDMALocalBlock *block;
-} RDMALocalBlocks;
-
-/*
- * Main data structure for RDMA state.
- * While there is only one copy of this structure being allocated right now,
- * this is the place where one would start if you wanted to consider
- * having more than one RDMA connection open at the same time.
- */
-typedef struct RDMAContext {
- char *host;
- int port;
-
- RDMAWorkRequestData wr_data[RDMA_WRID_MAX];
-
- /*
- * This is used by *_exchange_send() to figure out whether or not
- * the initial "READY" message has already been received or not.
- * This is because other functions may potentially poll() and detect
- * the READY message before send() does, in which case we need to
- * know if it completed.
- */
- int control_ready_expected;
-
- /* number of outstanding writes */
- int nb_sent;
-
- /* store info about current buffer so that we can
- merge it with future sends */
- uint64_t current_addr;
- uint64_t current_length;
- /* index of ram block the current buffer belongs to */
- int current_index;
- /* index of the chunk in the current ram block */
- int current_chunk;
-
- bool pin_all;
-
- /*
- * infiniband-specific variables for opening the device
- * and maintaining connection state and so forth.
- *
- * cm_id also has ibv_context, rdma_event_channel, and ibv_qp in
- * cm_id->verbs, cm_id->channel, and cm_id->qp.
- */
- struct rdma_cm_id *cm_id; /* connection manager ID */
- struct rdma_cm_id *listen_id;
- bool connected;
-
- struct ibv_context *verbs;
- struct rdma_event_channel *channel;
- struct ibv_qp *qp; /* queue pair */
- struct ibv_comp_channel *recv_comp_channel; /* recv completion channel */
- struct ibv_comp_channel *send_comp_channel; /* send completion channel */
- struct ibv_pd *pd; /* protection domain */
- struct ibv_cq *recv_cq; /* recvieve completion queue */
- struct ibv_cq *send_cq; /* send completion queue */
-
- /*
- * If a previous write failed (perhaps because of a failed
- * memory registration, then do not attempt any future work
- * and remember the error state.
- */
- bool errored;
- bool error_reported;
- bool received_error;
-
- /*
- * Description of ram blocks used throughout the code.
- */
- RDMALocalBlocks local_ram_blocks;
- RDMADestBlock *dest_blocks;
-
- /* Index of the next RAMBlock received during block registration */
- unsigned int next_src_index;
-
- /*
- * Migration on *destination* started.
- * Then use coroutine yield function.
- * Source runs in a thread, so we don't care.
- */
- int migration_started_on_destination;
-
- int total_registrations;
- int total_writes;
-
- int unregister_current, unregister_next;
- uint64_t unregistrations[RDMA_SIGNALED_SEND_MAX];
-
- GHashTable *blockmap;
-
- /* the RDMAContext for return path */
- struct RDMAContext *return_path;
- bool is_return_path;
-} RDMAContext;
-
-#define TYPE_QIO_CHANNEL_RDMA "qio-channel-rdma"
-OBJECT_DECLARE_SIMPLE_TYPE(QIOChannelRDMA, QIO_CHANNEL_RDMA)
-
-
-
-struct QIOChannelRDMA {
- QIOChannel parent;
- RDMAContext *rdmain;
- RDMAContext *rdmaout;
- QEMUFile *file;
- bool blocking; /* XXX we don't actually honour this yet */
-};
-
-/*
- * Main structure for IB Send/Recv control messages.
- * This gets prepended at the beginning of every Send/Recv.
- */
-typedef struct QEMU_PACKED {
- uint32_t len; /* Total length of data portion */
- uint32_t type; /* which control command to perform */
- uint32_t repeat; /* number of commands in data portion of same type */
- uint32_t padding;
-} RDMAControlHeader;
-
-static void control_to_network(RDMAControlHeader *control)
-{
- control->type = htonl(control->type);
- control->len = htonl(control->len);
- control->repeat = htonl(control->repeat);
-}
-
-static void network_to_control(RDMAControlHeader *control)
-{
- control->type = ntohl(control->type);
- control->len = ntohl(control->len);
- control->repeat = ntohl(control->repeat);
-}
-
-/*
- * Register a single Chunk.
- * Information sent by the source VM to inform the dest
- * to register an single chunk of memory before we can perform
- * the actual RDMA operation.
- */
-typedef struct QEMU_PACKED {
- union QEMU_PACKED {
- uint64_t current_addr; /* offset into the ram_addr_t space */
- uint64_t chunk; /* chunk to lookup if unregistering */
- } key;
- uint32_t current_index; /* which ramblock the chunk belongs to */
- uint32_t padding;
- uint64_t chunks; /* how many sequential chunks to register */
-} RDMARegister;
-
-static bool rdma_errored(RDMAContext *rdma)
-{
- if (rdma->errored && !rdma->error_reported) {
- error_report("RDMA is in an error state waiting migration"
- " to abort!");
- rdma->error_reported = true;
- }
- return rdma->errored;
-}
-
-static void register_to_network(RDMAContext *rdma, RDMARegister *reg)
-{
- RDMALocalBlock *local_block;
- local_block = &rdma->local_ram_blocks.block[reg->current_index];
-
- if (local_block->is_ram_block) {
- /*
- * current_addr as passed in is an address in the local ram_addr_t
- * space, we need to translate this for the destination
- */
- reg->key.current_addr -= local_block->offset;
- reg->key.current_addr += rdma->dest_blocks[reg->current_index].offset;
- }
- reg->key.current_addr = htonll(reg->key.current_addr);
- reg->current_index = htonl(reg->current_index);
- reg->chunks = htonll(reg->chunks);
-}
-
-static void network_to_register(RDMARegister *reg)
-{
- reg->key.current_addr = ntohll(reg->key.current_addr);
- reg->current_index = ntohl(reg->current_index);
- reg->chunks = ntohll(reg->chunks);
-}
-
-typedef struct QEMU_PACKED {
- uint32_t value; /* if zero, we will madvise() */
- uint32_t block_idx; /* which ram block index */
- uint64_t offset; /* Address in remote ram_addr_t space */
- uint64_t length; /* length of the chunk */
-} RDMACompress;
-
-static void compress_to_network(RDMAContext *rdma, RDMACompress *comp)
-{
- comp->value = htonl(comp->value);
- /*
- * comp->offset as passed in is an address in the local ram_addr_t
- * space, we need to translate this for the destination
- */
- comp->offset -= rdma->local_ram_blocks.block[comp->block_idx].offset;
- comp->offset += rdma->dest_blocks[comp->block_idx].offset;
- comp->block_idx = htonl(comp->block_idx);
- comp->offset = htonll(comp->offset);
- comp->length = htonll(comp->length);
-}
-
-static void network_to_compress(RDMACompress *comp)
-{
- comp->value = ntohl(comp->value);
- comp->block_idx = ntohl(comp->block_idx);
- comp->offset = ntohll(comp->offset);
- comp->length = ntohll(comp->length);
-}
-
-/*
- * The result of the dest's memory registration produces an "rkey"
- * which the source VM must reference in order to perform
- * the RDMA operation.
- */
-typedef struct QEMU_PACKED {
- uint32_t rkey;
- uint32_t padding;
- uint64_t host_addr;
-} RDMARegisterResult;
-
-static void result_to_network(RDMARegisterResult *result)
-{
- result->rkey = htonl(result->rkey);
- result->host_addr = htonll(result->host_addr);
-};
-
-static void network_to_result(RDMARegisterResult *result)
-{
- result->rkey = ntohl(result->rkey);
- result->host_addr = ntohll(result->host_addr);
-};
-
-static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head,
- uint8_t *data, RDMAControlHeader *resp,
- int *resp_idx,
- int (*callback)(RDMAContext *rdma,
- Error **errp),
- Error **errp);
-
-static inline uint64_t ram_chunk_index(const uint8_t *start,
- const uint8_t *host)
-{
- return ((uintptr_t) host - (uintptr_t) start) >> RDMA_REG_CHUNK_SHIFT;
-}
-
-static inline uint8_t *ram_chunk_start(const RDMALocalBlock *rdma_ram_block,
- uint64_t i)
-{
- return (uint8_t *)(uintptr_t)(rdma_ram_block->local_host_addr +
- (i << RDMA_REG_CHUNK_SHIFT));
-}
-
-static inline uint8_t *ram_chunk_end(const RDMALocalBlock *rdma_ram_block,
- uint64_t i)
-{
- uint8_t *result = ram_chunk_start(rdma_ram_block, i) +
- (1UL << RDMA_REG_CHUNK_SHIFT);
-
- if (result > (rdma_ram_block->local_host_addr + rdma_ram_block->length)) {
- result = rdma_ram_block->local_host_addr + rdma_ram_block->length;
- }
-
- return result;
-}
-
-static void rdma_add_block(RDMAContext *rdma, const char *block_name,
- void *host_addr,
- ram_addr_t block_offset, uint64_t length)
-{
- RDMALocalBlocks *local = &rdma->local_ram_blocks;
- RDMALocalBlock *block;
- RDMALocalBlock *old = local->block;
-
- local->block = g_new0(RDMALocalBlock, local->nb_blocks + 1);
-
- if (local->nb_blocks) {
- if (rdma->blockmap) {
- for (int x = 0; x < local->nb_blocks; x++) {
- g_hash_table_remove(rdma->blockmap,
- (void *)(uintptr_t)old[x].offset);
- g_hash_table_insert(rdma->blockmap,
- (void *)(uintptr_t)old[x].offset,
- &local->block[x]);
- }
- }
- memcpy(local->block, old, sizeof(RDMALocalBlock) * local->nb_blocks);
- g_free(old);
- }
-
- block = &local->block[local->nb_blocks];
-
- block->block_name = g_strdup(block_name);
- block->local_host_addr = host_addr;
- block->offset = block_offset;
- block->length = length;
- block->index = local->nb_blocks;
- block->src_index = ~0U; /* Filled in by the receipt of the block list */
- block->nb_chunks = ram_chunk_index(host_addr, host_addr + length) + 1UL;
- block->transit_bitmap = bitmap_new(block->nb_chunks);
- bitmap_clear(block->transit_bitmap, 0, block->nb_chunks);
- block->unregister_bitmap = bitmap_new(block->nb_chunks);
- bitmap_clear(block->unregister_bitmap, 0, block->nb_chunks);
- block->remote_keys = g_new0(uint32_t, block->nb_chunks);
-
- block->is_ram_block = local->init ? false : true;
-
- if (rdma->blockmap) {
- g_hash_table_insert(rdma->blockmap, (void *)(uintptr_t)block_offset,
block);
- }
-
- trace_rdma_add_block(block_name, local->nb_blocks,
- (uintptr_t) block->local_host_addr,
- block->offset, block->length,
- (uintptr_t) (block->local_host_addr + block->length),
- BITS_TO_LONGS(block->nb_chunks) *
- sizeof(unsigned long) * 8,
- block->nb_chunks);
-
- local->nb_blocks++;
-}
-
-/*
- * Memory regions need to be registered with the device and queue pairs setup
- * in advanced before the migration starts. This tells us where the RAM blocks
- * are so that we can register them individually.
- */
-static int qemu_rdma_init_one_block(RAMBlock *rb, void *opaque)
-{
- const char *block_name = qemu_ram_get_idstr(rb);
- void *host_addr = qemu_ram_get_host_addr(rb);
- ram_addr_t block_offset = qemu_ram_get_offset(rb);
- ram_addr_t length = qemu_ram_get_used_length(rb);
- rdma_add_block(opaque, block_name, host_addr, block_offset, length);
- return 0;
-}
-
-/*
- * Identify the RAMBlocks and their quantity. They will be references to
- * identify chunk boundaries inside each RAMBlock and also be referenced
- * during dynamic page registration.
- */
-static void qemu_rdma_init_ram_blocks(RDMAContext *rdma)
-{
- RDMALocalBlocks *local = &rdma->local_ram_blocks;
- int ret;
-
- assert(rdma->blockmap == NULL);
- memset(local, 0, sizeof *local);
- ret = foreach_not_ignored_block(qemu_rdma_init_one_block, rdma);
- assert(!ret);
- trace_qemu_rdma_init_ram_blocks(local->nb_blocks);
- rdma->dest_blocks = g_new0(RDMADestBlock,
- rdma->local_ram_blocks.nb_blocks);
- local->init = true;
-}
-
-/*
- * Note: If used outside of cleanup, the caller must ensure that the
destination
- * block structures are also updated
- */
-static void rdma_delete_block(RDMAContext *rdma, RDMALocalBlock *block)
-{
- RDMALocalBlocks *local = &rdma->local_ram_blocks;
- RDMALocalBlock *old = local->block;
-
- if (rdma->blockmap) {
- g_hash_table_remove(rdma->blockmap, (void *)(uintptr_t)block->offset);
- }
- if (block->pmr) {
- for (int j = 0; j < block->nb_chunks; j++) {
- if (!block->pmr[j]) {
- continue;
- }
- ibv_dereg_mr(block->pmr[j]);
- rdma->total_registrations--;
- }
- g_free(block->pmr);
- block->pmr = NULL;
- }
-
- if (block->mr) {
- ibv_dereg_mr(block->mr);
- rdma->total_registrations--;
- block->mr = NULL;
- }
-
- g_free(block->transit_bitmap);
- block->transit_bitmap = NULL;
-
- g_free(block->unregister_bitmap);
- block->unregister_bitmap = NULL;
-
- g_free(block->remote_keys);
- block->remote_keys = NULL;
-
- g_free(block->block_name);
- block->block_name = NULL;
-
- if (rdma->blockmap) {
- for (int x = 0; x < local->nb_blocks; x++) {
- g_hash_table_remove(rdma->blockmap,
- (void *)(uintptr_t)old[x].offset);
- }
- }
-
- if (local->nb_blocks > 1) {
-
- local->block = g_new0(RDMALocalBlock, local->nb_blocks - 1);
-
- if (block->index) {
- memcpy(local->block, old, sizeof(RDMALocalBlock) * block->index);
- }
-
- if (block->index < (local->nb_blocks - 1)) {
- memcpy(local->block + block->index, old + (block->index + 1),
- sizeof(RDMALocalBlock) *
- (local->nb_blocks - (block->index + 1)));
- for (int x = block->index; x < local->nb_blocks - 1; x++) {
- local->block[x].index--;
- }
- }
- } else {
- assert(block == local->block);
- local->block = NULL;
- }
-
- trace_rdma_delete_block(block, (uintptr_t)block->local_host_addr,
- block->offset, block->length,
- (uintptr_t)(block->local_host_addr +
block->length),
- BITS_TO_LONGS(block->nb_chunks) *
- sizeof(unsigned long) * 8, block->nb_chunks);
-
- g_free(old);
-
- local->nb_blocks--;
-
- if (local->nb_blocks && rdma->blockmap) {
- for (int x = 0; x < local->nb_blocks; x++) {
- g_hash_table_insert(rdma->blockmap,
- (void *)(uintptr_t)local->block[x].offset,
- &local->block[x]);
- }
- }
-}
-
-/*
- * Trace RDMA device open, with device details.
- */
-static void qemu_rdma_dump_id(const char *who, struct ibv_context *verbs)
-{
- struct ibv_port_attr port;
-
- if (ibv_query_port(verbs, 1, &port)) {
- trace_qemu_rdma_dump_id_failed(who);
- return;
- }
-
- trace_qemu_rdma_dump_id(who,
- verbs->device->name,
- verbs->device->dev_name,
- verbs->device->dev_path,
- verbs->device->ibdev_path,
- port.link_layer,
- port.link_layer == IBV_LINK_LAYER_INFINIBAND ? "Infiniband"
- : port.link_layer == IBV_LINK_LAYER_ETHERNET ? "Ethernet"
- : "Unknown");
-}
-
-/*
- * Trace RDMA gid addressing information.
- * Useful for understanding the RDMA device hierarchy in the kernel.
- */
-static void qemu_rdma_dump_gid(const char *who, struct rdma_cm_id *id)
-{
- char sgid[33];
- char dgid[33];
- inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.sgid, sgid, sizeof sgid);
- inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.dgid, dgid, sizeof dgid);
- trace_qemu_rdma_dump_gid(who, sgid, dgid);
-}
-
-/*
- * As of now, IPv6 over RoCE / iWARP is not supported by linux.
- * We will try the next addrinfo struct, and fail if there are
- * no other valid addresses to bind against.
- *
- * If user is listening on '[::]', then we will not have a opened a device
- * yet and have no way of verifying if the device is RoCE or not.
- *
- * In this case, the source VM will throw an error for ALL types of
- * connections (both IPv4 and IPv6) if the destination machine does not have
- * a regular infiniband network available for use.
- *
- * The only way to guarantee that an error is thrown for broken kernels is
- * for the management software to choose a *specific* interface at bind time
- * and validate what time of hardware it is.
- *
- * Unfortunately, this puts the user in a fix:
- *
- * If the source VM connects with an IPv4 address without knowing that the
- * destination has bound to '[::]' the migration will unconditionally fail
- * unless the management software is explicitly listening on the IPv4
- * address while using a RoCE-based device.
- *
- * If the source VM connects with an IPv6 address, then we're OK because we
can
- * throw an error on the source (and similarly on the destination).
- *
- * But in mixed environments, this will be broken for a while until it is
fixed
- * inside linux.
- *
- * We do provide a *tiny* bit of help in this function: We can list all of the
- * devices in the system and check to see if all the devices are RoCE or
- * Infiniband.
- *
- * If we detect that we have a *pure* RoCE environment, then we can safely
- * thrown an error even if the management software has specified '[::]' as the
- * bind address.
- *
- * However, if there is are multiple hetergeneous devices, then we cannot make
- * this assumption and the user just has to be sure they know what they are
- * doing.
- *
- * Patches are being reviewed on linux-rdma.
- */
-static int qemu_rdma_broken_ipv6_kernel(struct ibv_context *verbs, Error
**errp)
-{
- /* This bug only exists in linux, to our knowledge. */
-#ifdef CONFIG_LINUX
- struct ibv_port_attr port_attr;
-
- /*
- * Verbs are only NULL if management has bound to '[::]'.
- *
- * Let's iterate through all the devices and see if there any pure IB
- * devices (non-ethernet).
- *
- * If not, then we can safely proceed with the migration.
- * Otherwise, there are no guarantees until the bug is fixed in linux.
- */
- if (!verbs) {
- int num_devices;
- struct ibv_device **dev_list = ibv_get_device_list(&num_devices);
- bool roce_found = false;
- bool ib_found = false;
-
- for (int x = 0; x < num_devices; x++) {
- verbs = ibv_open_device(dev_list[x]);
- /*
- * ibv_open_device() is not documented to set errno. If
- * it does, it's somebody else's doc bug. If it doesn't,
- * the use of errno below is wrong.
- * TODO Find out whether ibv_open_device() sets errno.
- */
- if (!verbs) {
- if (errno == EPERM) {
- continue;
- } else {
- error_setg_errno(errp, errno,
- "could not open RDMA device context");
- return -1;
- }
- }
-
- if (ibv_query_port(verbs, 1, &port_attr)) {
- ibv_close_device(verbs);
- error_setg(errp,
- "RDMA ERROR: Could not query initial IB port");
- return -1;
- }
-
- if (port_attr.link_layer == IBV_LINK_LAYER_INFINIBAND) {
- ib_found = true;
- } else if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) {
- roce_found = true;
- }
-
- ibv_close_device(verbs);
-
- }
-
- if (roce_found) {
- if (ib_found) {
- warn_report("migrations may fail:"
- " IPv6 over RoCE / iWARP in linux"
- " is broken. But since you appear to have a"
- " mixed RoCE / IB environment, be sure to only"
- " migrate over the IB fabric until the kernel "
- " fixes the bug.");
- } else {
- error_setg(errp, "RDMA ERROR: "
- "You only have RoCE / iWARP devices in your systems"
- " and your management software has specified '[::]'"
- ", but IPv6 over RoCE / iWARP is not supported in
Linux.");
- return -1;
- }
- }
-
- return 0;
- }
-
- /*
- * If we have a verbs context, that means that some other than '[::]' was
- * used by the management software for binding. In which case we can
- * actually warn the user about a potentially broken kernel.
- */
-
- /* IB ports start with 1, not 0 */
- if (ibv_query_port(verbs, 1, &port_attr)) {
- error_setg(errp, "RDMA ERROR: Could not query initial IB port");
- return -1;
- }
-
- if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) {
- error_setg(errp, "RDMA ERROR: "
- "Linux kernel's RoCE / iWARP does not support IPv6 "
- "(but patches on linux-rdma in progress)");
- return -1;
- }
-
-#endif
-
- return 0;
-}
-
-/*
- * Figure out which RDMA device corresponds to the requested IP hostname
- * Also create the initial connection manager identifiers for opening
- * the connection.
- */
-static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp)
-{
- Error *err = NULL;
- int ret;
- struct rdma_addrinfo *res;
- char port_str[16];
- struct rdma_cm_event *cm_event;
- char ip[40] = "unknown";
-
- if (rdma->host == NULL || !strcmp(rdma->host, "")) {
- error_setg(errp, "RDMA ERROR: RDMA hostname has not been set");
- return -1;
- }
-
- /* create CM channel */
- rdma->channel = rdma_create_event_channel();
- if (!rdma->channel) {
- error_setg(errp, "RDMA ERROR: could not create CM channel");
- return -1;
- }
-
- /* create CM id */
- ret = rdma_create_id(rdma->channel, &rdma->cm_id, NULL, RDMA_PS_TCP);
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: could not create channel id");
- goto err_resolve_create_id;
- }
-
- snprintf(port_str, 16, "%d", rdma->port);
- port_str[15] = '\0';
-
- ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
- if (ret) {
- error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s",
- rdma->host);
- goto err_resolve_get_addr;
- }
-
- /* Try all addresses, saving the first error in @err */
- for (struct rdma_addrinfo *e = res; e != NULL; e = e->ai_next) {
- Error **local_errp = err ? NULL : &err;
-
- inet_ntop(e->ai_family,
- &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip);
- trace_qemu_rdma_resolve_host_trying(rdma->host, ip);
-
- ret = rdma_resolve_addr(rdma->cm_id, NULL, e->ai_dst_addr,
- RDMA_RESOLVE_TIMEOUT_MS);
- if (ret >= 0) {
- if (e->ai_family == AF_INET6) {
- ret = qemu_rdma_broken_ipv6_kernel(rdma->cm_id->verbs,
- local_errp);
- if (ret < 0) {
- continue;
- }
- }
- error_free(err);
- goto route;
- }
- }
-
- rdma_freeaddrinfo(res);
- if (err) {
- error_propagate(errp, err);
- } else {
- error_setg(errp, "RDMA ERROR: could not resolve address %s",
- rdma->host);
- }
- goto err_resolve_get_addr;
-
-route:
- rdma_freeaddrinfo(res);
- qemu_rdma_dump_gid("source_resolve_addr", rdma->cm_id);
-
- ret = rdma_get_cm_event(rdma->channel, &cm_event);
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: could not perform event_addr_resolved");
- goto err_resolve_get_addr;
- }
-
- if (cm_event->event != RDMA_CM_EVENT_ADDR_RESOLVED) {
- error_setg(errp,
- "RDMA ERROR: result not equal to event_addr_resolved %s",
- rdma_event_str(cm_event->event));
- rdma_ack_cm_event(cm_event);
- goto err_resolve_get_addr;
- }
- rdma_ack_cm_event(cm_event);
-
- /* resolve route */
- ret = rdma_resolve_route(rdma->cm_id, RDMA_RESOLVE_TIMEOUT_MS);
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: could not resolve rdma route");
- goto err_resolve_get_addr;
- }
-
- ret = rdma_get_cm_event(rdma->channel, &cm_event);
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: could not perform event_route_resolved");
- goto err_resolve_get_addr;
- }
- if (cm_event->event != RDMA_CM_EVENT_ROUTE_RESOLVED) {
- error_setg(errp, "RDMA ERROR: "
- "result not equal to event_route_resolved: %s",
- rdma_event_str(cm_event->event));
- rdma_ack_cm_event(cm_event);
- goto err_resolve_get_addr;
- }
- rdma_ack_cm_event(cm_event);
- rdma->verbs = rdma->cm_id->verbs;
- qemu_rdma_dump_id("source_resolve_host", rdma->cm_id->verbs);
- qemu_rdma_dump_gid("source_resolve_host", rdma->cm_id);
- return 0;
-
-err_resolve_get_addr:
- rdma_destroy_id(rdma->cm_id);
- rdma->cm_id = NULL;
-err_resolve_create_id:
- rdma_destroy_event_channel(rdma->channel);
- rdma->channel = NULL;
- return -1;
-}
-
-/*
- * Create protection domain and completion queues
- */
-static int qemu_rdma_alloc_pd_cq(RDMAContext *rdma, Error **errp)
-{
- /* allocate pd */
- rdma->pd = ibv_alloc_pd(rdma->verbs);
- if (!rdma->pd) {
- error_setg(errp, "failed to allocate protection domain");
- return -1;
- }
-
- /* create receive completion channel */
- rdma->recv_comp_channel = ibv_create_comp_channel(rdma->verbs);
- if (!rdma->recv_comp_channel) {
- error_setg(errp, "failed to allocate receive completion channel");
- goto err_alloc_pd_cq;
- }
-
- /*
- * Completion queue can be filled by read work requests.
- */
- rdma->recv_cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3),
- NULL, rdma->recv_comp_channel, 0);
- if (!rdma->recv_cq) {
- error_setg(errp, "failed to allocate receive completion queue");
- goto err_alloc_pd_cq;
- }
-
- /* create send completion channel */
- rdma->send_comp_channel = ibv_create_comp_channel(rdma->verbs);
- if (!rdma->send_comp_channel) {
- error_setg(errp, "failed to allocate send completion channel");
- goto err_alloc_pd_cq;
- }
-
- rdma->send_cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3),
- NULL, rdma->send_comp_channel, 0);
- if (!rdma->send_cq) {
- error_setg(errp, "failed to allocate send completion queue");
- goto err_alloc_pd_cq;
- }
-
- return 0;
-
-err_alloc_pd_cq:
- if (rdma->pd) {
- ibv_dealloc_pd(rdma->pd);
- }
- if (rdma->recv_comp_channel) {
- ibv_destroy_comp_channel(rdma->recv_comp_channel);
- }
- if (rdma->send_comp_channel) {
- ibv_destroy_comp_channel(rdma->send_comp_channel);
- }
- if (rdma->recv_cq) {
- ibv_destroy_cq(rdma->recv_cq);
- rdma->recv_cq = NULL;
- }
- rdma->pd = NULL;
- rdma->recv_comp_channel = NULL;
- rdma->send_comp_channel = NULL;
- return -1;
-
-}
-
-/*
- * Create queue pairs.
- */
-static int qemu_rdma_alloc_qp(RDMAContext *rdma)
-{
- struct ibv_qp_init_attr attr = { 0 };
-
- attr.cap.max_send_wr = RDMA_SIGNALED_SEND_MAX;
- attr.cap.max_recv_wr = 3;
- attr.cap.max_send_sge = 1;
- attr.cap.max_recv_sge = 1;
- attr.send_cq = rdma->send_cq;
- attr.recv_cq = rdma->recv_cq;
- attr.qp_type = IBV_QPT_RC;
-
- if (rdma_create_qp(rdma->cm_id, rdma->pd, &attr) < 0) {
- return -1;
- }
-
- rdma->qp = rdma->cm_id->qp;
- return 0;
-}
-
-/* Check whether On-Demand Paging is supported by RDAM device */
-static bool rdma_support_odp(struct ibv_context *dev)
-{
- struct ibv_device_attr_ex attr = {0};
-
- if (ibv_query_device_ex(dev, NULL, &attr)) {
- return false;
- }
-
- if (attr.odp_caps.general_caps & IBV_ODP_SUPPORT) {
- return true;
- }
-
- return false;
-}
-
-/*
- * ibv_advise_mr to avoid RNR NAK error as far as possible.
- * The responder mr registering with ODP will sent RNR NAK back to
- * the requester in the face of the page fault.
- */
-static void qemu_rdma_advise_prefetch_mr(struct ibv_pd *pd, uint64_t addr,
- uint32_t len, uint32_t lkey,
- const char *name, bool wr)
-{
-#ifdef HAVE_IBV_ADVISE_MR
- int ret;
- int advice = wr ? IBV_ADVISE_MR_ADVICE_PREFETCH_WRITE :
- IBV_ADVISE_MR_ADVICE_PREFETCH;
- struct ibv_sge sg_list = {.lkey = lkey, .addr = addr, .length = len};
-
- ret = ibv_advise_mr(pd, advice,
- IBV_ADVISE_MR_FLAG_FLUSH, &sg_list, 1);
- /* ignore the error */
- trace_qemu_rdma_advise_mr(name, len, addr, strerror(ret));
-#endif
-}
-
-static int qemu_rdma_reg_whole_ram_blocks(RDMAContext *rdma, Error **errp)
-{
- int i;
- RDMALocalBlocks *local = &rdma->local_ram_blocks;
-
- for (i = 0; i < local->nb_blocks; i++) {
- int access = IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE;
-
- local->block[i].mr =
- ibv_reg_mr(rdma->pd,
- local->block[i].local_host_addr,
- local->block[i].length, access
- );
- /*
- * ibv_reg_mr() is not documented to set errno. If it does,
- * it's somebody else's doc bug. If it doesn't, the use of
- * errno below is wrong.
- * TODO Find out whether ibv_reg_mr() sets errno.
- */
- if (!local->block[i].mr &&
- errno == ENOTSUP && rdma_support_odp(rdma->verbs)) {
- access |= IBV_ACCESS_ON_DEMAND;
- /* register ODP mr */
- local->block[i].mr =
- ibv_reg_mr(rdma->pd,
- local->block[i].local_host_addr,
- local->block[i].length, access);
- trace_qemu_rdma_register_odp_mr(local->block[i].block_name);
-
- if (local->block[i].mr) {
- qemu_rdma_advise_prefetch_mr(rdma->pd,
- (uintptr_t)local->block[i].local_host_addr,
- local->block[i].length,
- local->block[i].mr->lkey,
- local->block[i].block_name,
- true);
- }
- }
-
- if (!local->block[i].mr) {
- error_setg_errno(errp, errno,
- "Failed to register local dest ram block!");
- goto err;
- }
- rdma->total_registrations++;
- }
-
- return 0;
-
-err:
- for (i--; i >= 0; i--) {
- ibv_dereg_mr(local->block[i].mr);
- local->block[i].mr = NULL;
- rdma->total_registrations--;
- }
-
- return -1;
-
-}
-
-/*
- * Find the ram block that corresponds to the page requested to be
- * transmitted by QEMU.
- *
- * Once the block is found, also identify which 'chunk' within that
- * block that the page belongs to.
- */
-static void qemu_rdma_search_ram_block(RDMAContext *rdma,
- uintptr_t block_offset,
- uint64_t offset,
- uint64_t length,
- uint64_t *block_index,
- uint64_t *chunk_index)
-{
- uint64_t current_addr = block_offset + offset;
- RDMALocalBlock *block = g_hash_table_lookup(rdma->blockmap,
- (void *) block_offset);
- assert(block);
- assert(current_addr >= block->offset);
- assert((current_addr + length) <= (block->offset + block->length));
-
- *block_index = block->index;
- *chunk_index = ram_chunk_index(block->local_host_addr,
- block->local_host_addr + (current_addr - block->offset));
-}
-
-/*
- * Register a chunk with IB. If the chunk was already registered
- * previously, then skip.
- *
- * Also return the keys associated with the registration needed
- * to perform the actual RDMA operation.
- */
-static int qemu_rdma_register_and_get_keys(RDMAContext *rdma,
- RDMALocalBlock *block, uintptr_t host_addr,
- uint32_t *lkey, uint32_t *rkey, int chunk,
- uint8_t *chunk_start, uint8_t *chunk_end)
-{
- if (block->mr) {
- if (lkey) {
- *lkey = block->mr->lkey;
- }
- if (rkey) {
- *rkey = block->mr->rkey;
- }
- return 0;
- }
-
- /* allocate memory to store chunk MRs */
- if (!block->pmr) {
- block->pmr = g_new0(struct ibv_mr *, block->nb_chunks);
- }
-
- /*
- * If 'rkey', then we're the destination, so grant access to the source.
- *
- * If 'lkey', then we're the source VM, so grant access only to ourselves.
- */
- if (!block->pmr[chunk]) {
- uint64_t len = chunk_end - chunk_start;
- int access = rkey ? IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE :
- 0;
-
- trace_qemu_rdma_register_and_get_keys(len, chunk_start);
-
- block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, access);
- /*
- * ibv_reg_mr() is not documented to set errno. If it does,
- * it's somebody else's doc bug. If it doesn't, the use of
- * errno below is wrong.
- * TODO Find out whether ibv_reg_mr() sets errno.
- */
- if (!block->pmr[chunk] &&
- errno == ENOTSUP && rdma_support_odp(rdma->verbs)) {
- access |= IBV_ACCESS_ON_DEMAND;
- /* register ODP mr */
- block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, access);
- trace_qemu_rdma_register_odp_mr(block->block_name);
-
- if (block->pmr[chunk]) {
- qemu_rdma_advise_prefetch_mr(rdma->pd, (uintptr_t)chunk_start,
- len, block->pmr[chunk]->lkey,
- block->block_name, rkey);
-
- }
- }
- }
- if (!block->pmr[chunk]) {
- return -1;
- }
- rdma->total_registrations++;
-
- if (lkey) {
- *lkey = block->pmr[chunk]->lkey;
- }
- if (rkey) {
- *rkey = block->pmr[chunk]->rkey;
- }
- return 0;
-}
-
-/*
- * Register (at connection time) the memory used for control
- * channel messages.
- */
-static int qemu_rdma_reg_control(RDMAContext *rdma, int idx)
-{
- rdma->wr_data[idx].control_mr = ibv_reg_mr(rdma->pd,
- rdma->wr_data[idx].control, RDMA_CONTROL_MAX_BUFFER,
- IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE);
- if (rdma->wr_data[idx].control_mr) {
- rdma->total_registrations++;
- return 0;
- }
- return -1;
-}
-
-/*
- * Perform a non-optimized memory unregistration after every transfer
- * for demonstration purposes, only if pin-all is not requested.
- *
- * Potential optimizations:
- * 1. Start a new thread to run this function continuously
- - for bit clearing
- - and for receipt of unregister messages
- * 2. Use an LRU.
- * 3. Use workload hints.
- */
-static int qemu_rdma_unregister_waiting(RDMAContext *rdma)
-{
- Error *err = NULL;
-
- while (rdma->unregistrations[rdma->unregister_current]) {
- int ret;
- uint64_t wr_id = rdma->unregistrations[rdma->unregister_current];
- uint64_t chunk =
- (wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT;
- uint64_t index =
- (wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT;
- RDMALocalBlock *block =
- &(rdma->local_ram_blocks.block[index]);
- RDMARegister reg = { .current_index = index };
- RDMAControlHeader resp = { .type = RDMA_CONTROL_UNREGISTER_FINISHED,
- };
- RDMAControlHeader head = { .len = sizeof(RDMARegister),
- .type = RDMA_CONTROL_UNREGISTER_REQUEST,
- .repeat = 1,
- };
-
- trace_qemu_rdma_unregister_waiting_proc(chunk,
- rdma->unregister_current);
-
- rdma->unregistrations[rdma->unregister_current] = 0;
- rdma->unregister_current++;
-
- if (rdma->unregister_current == RDMA_SIGNALED_SEND_MAX) {
- rdma->unregister_current = 0;
- }
-
-
- /*
- * Unregistration is speculative (because migration is single-threaded
- * and we cannot break the protocol's inifinband message ordering).
- * Thus, if the memory is currently being used for transmission,
- * then abort the attempt to unregister and try again
- * later the next time a completion is received for this memory.
- */
- clear_bit(chunk, block->unregister_bitmap);
-
- if (test_bit(chunk, block->transit_bitmap)) {
- trace_qemu_rdma_unregister_waiting_inflight(chunk);
- continue;
- }
-
- trace_qemu_rdma_unregister_waiting_send(chunk);
-
- ret = ibv_dereg_mr(block->pmr[chunk]);
- block->pmr[chunk] = NULL;
- block->remote_keys[chunk] = 0;
-
- if (ret != 0) {
- error_report("unregistration chunk failed: %s",
- strerror(ret));
- return -1;
- }
- rdma->total_registrations--;
-
- reg.key.chunk = chunk;
- register_to_network(rdma, ®);
- ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) ®,
- &resp, NULL, NULL, &err);
- if (ret < 0) {
- error_report_err(err);
- return -1;
- }
-
- trace_qemu_rdma_unregister_waiting_complete(chunk);
- }
-
- return 0;
-}
-
-static uint64_t qemu_rdma_make_wrid(uint64_t wr_id, uint64_t index,
- uint64_t chunk)
-{
- uint64_t result = wr_id & RDMA_WRID_TYPE_MASK;
-
- result |= (index << RDMA_WRID_BLOCK_SHIFT);
- result |= (chunk << RDMA_WRID_CHUNK_SHIFT);
-
- return result;
-}
-
-/*
- * Consult the connection manager to see a work request
- * (of any kind) has completed.
- * Return the work request ID that completed.
- */
-static int qemu_rdma_poll(RDMAContext *rdma, struct ibv_cq *cq,
- uint64_t *wr_id_out, uint32_t *byte_len)
-{
- int ret;
- struct ibv_wc wc;
- uint64_t wr_id;
-
- ret = ibv_poll_cq(cq, 1, &wc);
-
- if (!ret) {
- *wr_id_out = RDMA_WRID_NONE;
- return 0;
- }
-
- if (ret < 0) {
- return -1;
- }
-
- wr_id = wc.wr_id & RDMA_WRID_TYPE_MASK;
-
- if (wc.status != IBV_WC_SUCCESS) {
- return -1;
- }
-
- if (rdma->control_ready_expected &&
- (wr_id >= RDMA_WRID_RECV_CONTROL)) {
- trace_qemu_rdma_poll_recv(wr_id - RDMA_WRID_RECV_CONTROL, wr_id,
- rdma->nb_sent);
- rdma->control_ready_expected = 0;
- }
-
- if (wr_id == RDMA_WRID_RDMA_WRITE) {
- uint64_t chunk =
- (wc.wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT;
- uint64_t index =
- (wc.wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT;
- RDMALocalBlock *block = &(rdma->local_ram_blocks.block[index]);
-
- trace_qemu_rdma_poll_write(wr_id, rdma->nb_sent,
- index, chunk, block->local_host_addr,
- (void *)(uintptr_t)block->remote_host_addr);
-
- clear_bit(chunk, block->transit_bitmap);
-
- if (rdma->nb_sent > 0) {
- rdma->nb_sent--;
- }
- } else {
- trace_qemu_rdma_poll_other(wr_id, rdma->nb_sent);
- }
-
- *wr_id_out = wc.wr_id;
- if (byte_len) {
- *byte_len = wc.byte_len;
- }
-
- return 0;
-}
-
-/* Wait for activity on the completion channel.
- * Returns 0 on success, none-0 on error.
- */
-static int qemu_rdma_wait_comp_channel(RDMAContext *rdma,
- struct ibv_comp_channel *comp_channel)
-{
- struct rdma_cm_event *cm_event;
-
- /*
- * Coroutine doesn't start until migration_fd_process_incoming()
- * so don't yield unless we know we're running inside of a coroutine.
- */
- if (rdma->migration_started_on_destination &&
- migration_incoming_get_current()->state == MIGRATION_STATUS_ACTIVE) {
- yield_until_fd_readable(comp_channel->fd);
- } else {
- /* This is the source side, we're in a separate thread
- * or destination prior to migration_fd_process_incoming()
- * after postcopy, the destination also in a separate thread.
- * we can't yield; so we have to poll the fd.
- * But we need to be able to handle 'cancel' or an error
- * without hanging forever.
- */
- while (!rdma->errored && !rdma->received_error) {
- GPollFD pfds[2];
- pfds[0].fd = comp_channel->fd;
- pfds[0].events = G_IO_IN | G_IO_HUP | G_IO_ERR;
- pfds[0].revents = 0;
-
- pfds[1].fd = rdma->channel->fd;
- pfds[1].events = G_IO_IN | G_IO_HUP | G_IO_ERR;
- pfds[1].revents = 0;
-
- /* 0.1s timeout, should be fine for a 'cancel' */
- switch (qemu_poll_ns(pfds, 2, 100 * 1000 * 1000)) {
- case 2:
- case 1: /* fd active */
- if (pfds[0].revents) {
- return 0;
- }
-
- if (pfds[1].revents) {
- if (rdma_get_cm_event(rdma->channel, &cm_event) < 0) {
- return -1;
- }
-
- if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED ||
- cm_event->event == RDMA_CM_EVENT_DEVICE_REMOVAL) {
- rdma_ack_cm_event(cm_event);
- return -1;
- }
- rdma_ack_cm_event(cm_event);
- }
- break;
-
- case 0: /* Timeout, go around again */
- break;
-
- default: /* Error of some type -
- * I don't trust errno from qemu_poll_ns
- */
- return -1;
- }
-
- if (migrate_get_current()->state == MIGRATION_STATUS_CANCELLING) {
- /* Bail out and let the cancellation happen */
- return -1;
- }
- }
- }
-
- if (rdma->received_error) {
- return -1;
- }
- return -rdma->errored;
-}
-
-static struct ibv_comp_channel *to_channel(RDMAContext *rdma, uint64_t wrid)
-{
- return wrid < RDMA_WRID_RECV_CONTROL ? rdma->send_comp_channel :
- rdma->recv_comp_channel;
-}
-
-static struct ibv_cq *to_cq(RDMAContext *rdma, uint64_t wrid)
-{
- return wrid < RDMA_WRID_RECV_CONTROL ? rdma->send_cq : rdma->recv_cq;
-}
-
-/*
- * Block until the next work request has completed.
- *
- * First poll to see if a work request has already completed,
- * otherwise block.
- *
- * If we encounter completed work requests for IDs other than
- * the one we're interested in, then that's generally an error.
- *
- * The only exception is actual RDMA Write completions. These
- * completions only need to be recorded, but do not actually
- * need further processing.
- */
-static int qemu_rdma_block_for_wrid(RDMAContext *rdma,
- uint64_t wrid_requested,
- uint32_t *byte_len)
-{
- int num_cq_events = 0, ret;
- struct ibv_cq *cq;
- void *cq_ctx;
- uint64_t wr_id = RDMA_WRID_NONE, wr_id_in;
- struct ibv_comp_channel *ch = to_channel(rdma, wrid_requested);
- struct ibv_cq *poll_cq = to_cq(rdma, wrid_requested);
-
- if (ibv_req_notify_cq(poll_cq, 0)) {
- return -1;
- }
- /* poll cq first */
- while (wr_id != wrid_requested) {
- ret = qemu_rdma_poll(rdma, poll_cq, &wr_id_in, byte_len);
- if (ret < 0) {
- return -1;
- }
-
- wr_id = wr_id_in & RDMA_WRID_TYPE_MASK;
-
- if (wr_id == RDMA_WRID_NONE) {
- break;
- }
- if (wr_id != wrid_requested) {
- trace_qemu_rdma_block_for_wrid_miss(wrid_requested, wr_id);
- }
- }
-
- if (wr_id == wrid_requested) {
- return 0;
- }
-
- while (1) {
- ret = qemu_rdma_wait_comp_channel(rdma, ch);
- if (ret < 0) {
- goto err_block_for_wrid;
- }
-
- ret = ibv_get_cq_event(ch, &cq, &cq_ctx);
- if (ret < 0) {
- goto err_block_for_wrid;
- }
-
- num_cq_events++;
-
- if (ibv_req_notify_cq(cq, 0)) {
- goto err_block_for_wrid;
- }
-
- while (wr_id != wrid_requested) {
- ret = qemu_rdma_poll(rdma, poll_cq, &wr_id_in, byte_len);
- if (ret < 0) {
- goto err_block_for_wrid;
- }
-
- wr_id = wr_id_in & RDMA_WRID_TYPE_MASK;
-
- if (wr_id == RDMA_WRID_NONE) {
- break;
- }
- if (wr_id != wrid_requested) {
- trace_qemu_rdma_block_for_wrid_miss(wrid_requested, wr_id);
- }
- }
-
- if (wr_id == wrid_requested) {
- goto success_block_for_wrid;
- }
- }
-
-success_block_for_wrid:
- if (num_cq_events) {
- ibv_ack_cq_events(cq, num_cq_events);
- }
- return 0;
-
-err_block_for_wrid:
- if (num_cq_events) {
- ibv_ack_cq_events(cq, num_cq_events);
- }
-
- rdma->errored = true;
- return -1;
-}
-
-/*
- * Post a SEND message work request for the control channel
- * containing some data and block until the post completes.
- */
-static int qemu_rdma_post_send_control(RDMAContext *rdma, uint8_t *buf,
- RDMAControlHeader *head,
- Error **errp)
-{
- int ret;
- RDMAWorkRequestData *wr = &rdma->wr_data[RDMA_WRID_CONTROL];
- struct ibv_send_wr *bad_wr;
- struct ibv_sge sge = {
- .addr = (uintptr_t)(wr->control),
- .length = head->len + sizeof(RDMAControlHeader),
- .lkey = wr->control_mr->lkey,
- };
- struct ibv_send_wr send_wr = {
- .wr_id = RDMA_WRID_SEND_CONTROL,
- .opcode = IBV_WR_SEND,
- .send_flags = IBV_SEND_SIGNALED,
- .sg_list = &sge,
- .num_sge = 1,
- };
-
- trace_qemu_rdma_post_send_control(control_desc(head->type));
-
- /*
- * We don't actually need to do a memcpy() in here if we used
- * the "sge" properly, but since we're only sending control messages
- * (not RAM in a performance-critical path), then its OK for now.
- *
- * The copy makes the RDMAControlHeader simpler to manipulate
- * for the time being.
- */
- assert(head->len <= RDMA_CONTROL_MAX_BUFFER - sizeof(*head));
- memcpy(wr->control, head, sizeof(RDMAControlHeader));
- control_to_network((void *) wr->control);
-
- if (buf) {
- memcpy(wr->control + sizeof(RDMAControlHeader), buf, head->len);
- }
-
-
- ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr);
-
- if (ret > 0) {
- error_setg(errp, "Failed to use post IB SEND for control");
- return -1;
- }
-
- ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_SEND_CONTROL, NULL);
- if (ret < 0) {
- error_setg(errp, "rdma migration: send polling control error");
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Post a RECV work request in anticipation of some future receipt
- * of data on the control channel.
- */
-static int qemu_rdma_post_recv_control(RDMAContext *rdma, int idx,
- Error **errp)
-{
- struct ibv_recv_wr *bad_wr;
- struct ibv_sge sge = {
- .addr = (uintptr_t)(rdma->wr_data[idx].control),
- .length = RDMA_CONTROL_MAX_BUFFER,
- .lkey = rdma->wr_data[idx].control_mr->lkey,
- };
-
- struct ibv_recv_wr recv_wr = {
- .wr_id = RDMA_WRID_RECV_CONTROL + idx,
- .sg_list = &sge,
- .num_sge = 1,
- };
-
-
- if (ibv_post_recv(rdma->qp, &recv_wr, &bad_wr)) {
- error_setg(errp, "error posting control recv");
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Block and wait for a RECV control channel message to arrive.
- */
-static int qemu_rdma_exchange_get_response(RDMAContext *rdma,
- RDMAControlHeader *head, uint32_t expecting, int idx,
- Error **errp)
-{
- uint32_t byte_len;
- int ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RECV_CONTROL + idx,
- &byte_len);
-
- if (ret < 0) {
- error_setg(errp, "rdma migration: recv polling control error!");
- return -1;
- }
-
- network_to_control((void *) rdma->wr_data[idx].control);
- memcpy(head, rdma->wr_data[idx].control, sizeof(RDMAControlHeader));
-
- trace_qemu_rdma_exchange_get_response_start(control_desc(expecting));
-
- if (expecting == RDMA_CONTROL_NONE) {
- trace_qemu_rdma_exchange_get_response_none(control_desc(head->type),
- head->type);
- } else if (head->type != expecting || head->type == RDMA_CONTROL_ERROR) {
- error_setg(errp, "Was expecting a %s (%d) control message"
- ", but got: %s (%d), length: %d",
- control_desc(expecting), expecting,
- control_desc(head->type), head->type, head->len);
- if (head->type == RDMA_CONTROL_ERROR) {
- rdma->received_error = true;
- }
- return -1;
- }
- if (head->len > RDMA_CONTROL_MAX_BUFFER - sizeof(*head)) {
- error_setg(errp, "too long length: %d", head->len);
- return -1;
- }
- if (sizeof(*head) + head->len != byte_len) {
- error_setg(errp, "Malformed length: %d byte_len %d",
- head->len, byte_len);
- return -1;
- }
-
- return 0;
-}
-
-/*
- * When a RECV work request has completed, the work request's
- * buffer is pointed at the header.
- *
- * This will advance the pointer to the data portion
- * of the control message of the work request's buffer that
- * was populated after the work request finished.
- */
-static void qemu_rdma_move_header(RDMAContext *rdma, int idx,
- RDMAControlHeader *head)
-{
- rdma->wr_data[idx].control_len = head->len;
- rdma->wr_data[idx].control_curr =
- rdma->wr_data[idx].control + sizeof(RDMAControlHeader);
-}
-
-/*
- * This is an 'atomic' high-level operation to deliver a single, unified
- * control-channel message.
- *
- * Additionally, if the user is expecting some kind of reply to this message,
- * they can request a 'resp' response message be filled in by posting an
- * additional work request on behalf of the user and waiting for an additional
- * completion.
- *
- * The extra (optional) response is used during registration to us from having
- * to perform an *additional* exchange of message just to provide a response by
- * instead piggy-backing on the acknowledgement.
- */
-static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head,
- uint8_t *data, RDMAControlHeader *resp,
- int *resp_idx,
- int (*callback)(RDMAContext *rdma,
- Error **errp),
- Error **errp)
-{
- int ret;
-
- /*
- * Wait until the dest is ready before attempting to deliver the message
- * by waiting for a READY message.
- */
- if (rdma->control_ready_expected) {
- RDMAControlHeader resp_ignored;
-
- ret = qemu_rdma_exchange_get_response(rdma, &resp_ignored,
- RDMA_CONTROL_READY,
- RDMA_WRID_READY, errp);
- if (ret < 0) {
- return -1;
- }
- }
-
- /*
- * If the user is expecting a response, post a WR in anticipation of it.
- */
- if (resp) {
- ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_DATA, errp);
- if (ret < 0) {
- return -1;
- }
- }
-
- /*
- * Post a WR to replace the one we just consumed for the READY message.
- */
- ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp);
- if (ret < 0) {
- return -1;
- }
-
- /*
- * Deliver the control message that was requested.
- */
- ret = qemu_rdma_post_send_control(rdma, data, head, errp);
-
- if (ret < 0) {
- return -1;
- }
-
- /*
- * If we're expecting a response, block and wait for it.
- */
- if (resp) {
- if (callback) {
- trace_qemu_rdma_exchange_send_issue_callback();
- ret = callback(rdma, errp);
- if (ret < 0) {
- return -1;
- }
- }
-
- trace_qemu_rdma_exchange_send_waiting(control_desc(resp->type));
- ret = qemu_rdma_exchange_get_response(rdma, resp,
- resp->type, RDMA_WRID_DATA,
- errp);
-
- if (ret < 0) {
- return -1;
- }
-
- qemu_rdma_move_header(rdma, RDMA_WRID_DATA, resp);
- if (resp_idx) {
- *resp_idx = RDMA_WRID_DATA;
- }
- trace_qemu_rdma_exchange_send_received(control_desc(resp->type));
- }
-
- rdma->control_ready_expected = 1;
-
- return 0;
-}
-
-/*
- * This is an 'atomic' high-level operation to receive a single, unified
- * control-channel message.
- */
-static int qemu_rdma_exchange_recv(RDMAContext *rdma, RDMAControlHeader *head,
- uint32_t expecting, Error **errp)
-{
- RDMAControlHeader ready = {
- .len = 0,
- .type = RDMA_CONTROL_READY,
- .repeat = 1,
- };
- int ret;
-
- /*
- * Inform the source that we're ready to receive a message.
- */
- ret = qemu_rdma_post_send_control(rdma, NULL, &ready, errp);
-
- if (ret < 0) {
- return -1;
- }
-
- /*
- * Block and wait for the message.
- */
- ret = qemu_rdma_exchange_get_response(rdma, head,
- expecting, RDMA_WRID_READY, errp);
-
- if (ret < 0) {
- return -1;
- }
-
- qemu_rdma_move_header(rdma, RDMA_WRID_READY, head);
-
- /*
- * Post a new RECV work request to replace the one we just consumed.
- */
- ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp);
- if (ret < 0) {
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Write an actual chunk of memory using RDMA.
- *
- * If we're using dynamic registration on the dest-side, we have to
- * send a registration command first.
- */
-static int qemu_rdma_write_one(RDMAContext *rdma,
- int current_index, uint64_t current_addr,
- uint64_t length, Error **errp)
-{
- struct ibv_sge sge;
- struct ibv_send_wr send_wr = { 0 };
- struct ibv_send_wr *bad_wr;
- int reg_result_idx, ret, count = 0;
- uint64_t chunk, chunks;
- uint8_t *chunk_start, *chunk_end;
- RDMALocalBlock *block = &(rdma->local_ram_blocks.block[current_index]);
- RDMARegister reg;
- RDMARegisterResult *reg_result;
- RDMAControlHeader resp = { .type = RDMA_CONTROL_REGISTER_RESULT };
- RDMAControlHeader head = { .len = sizeof(RDMARegister),
- .type = RDMA_CONTROL_REGISTER_REQUEST,
- .repeat = 1,
- };
-
-retry:
- sge.addr = (uintptr_t)(block->local_host_addr +
- (current_addr - block->offset));
- sge.length = length;
-
- chunk = ram_chunk_index(block->local_host_addr,
- (uint8_t *)(uintptr_t)sge.addr);
- chunk_start = ram_chunk_start(block, chunk);
-
- if (block->is_ram_block) {
- chunks = length / (1UL << RDMA_REG_CHUNK_SHIFT);
-
- if (chunks && ((length % (1UL << RDMA_REG_CHUNK_SHIFT)) == 0)) {
- chunks--;
- }
- } else {
- chunks = block->length / (1UL << RDMA_REG_CHUNK_SHIFT);
-
- if (chunks && ((block->length % (1UL << RDMA_REG_CHUNK_SHIFT)) == 0)) {
- chunks--;
- }
- }
-
- trace_qemu_rdma_write_one_top(chunks + 1,
- (chunks + 1) *
- (1UL << RDMA_REG_CHUNK_SHIFT) / 1024 / 1024);
-
- chunk_end = ram_chunk_end(block, chunk + chunks);
-
-
- while (test_bit(chunk, block->transit_bitmap)) {
- (void)count;
- trace_qemu_rdma_write_one_block(count++, current_index, chunk,
- sge.addr, length, rdma->nb_sent, block->nb_chunks);
-
- ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL);
-
- if (ret < 0) {
- error_setg(errp, "Failed to Wait for previous write to complete "
- "block %d chunk %" PRIu64
- " current %" PRIu64 " len %" PRIu64 " %d",
- current_index, chunk, sge.addr, length, rdma->nb_sent);
- return -1;
- }
- }
-
- if (!rdma->pin_all || !block->is_ram_block) {
- if (!block->remote_keys[chunk]) {
- /*
- * This chunk has not yet been registered, so first check to see
- * if the entire chunk is zero. If so, tell the other size to
- * memset() + madvise() the entire chunk without RDMA.
- */
-
- if (buffer_is_zero((void *)(uintptr_t)sge.addr, length)) {
- RDMACompress comp = {
- .offset = current_addr,
- .value = 0,
- .block_idx = current_index,
- .length = length,
- };
-
- head.len = sizeof(comp);
- head.type = RDMA_CONTROL_COMPRESS;
-
- trace_qemu_rdma_write_one_zero(chunk, sge.length,
- current_index, current_addr);
-
- compress_to_network(rdma, &comp);
- ret = qemu_rdma_exchange_send(rdma, &head,
- (uint8_t *) &comp, NULL, NULL, NULL, errp);
-
- if (ret < 0) {
- return -1;
- }
-
- /*
- * TODO: Here we are sending something, but we are not
- * accounting for anything transferred. The following is
wrong:
- *
- * stat64_add(&mig_stats.rdma_bytes, sge.length);
- *
- * because we are using some kind of compression. I
- * would think that head.len would be the more similar
- * thing to a correct value.
- */
- stat64_add(&mig_stats.zero_pages,
- sge.length / qemu_target_page_size());
- return 1;
- }
-
- /*
- * Otherwise, tell other side to register.
- */
- reg.current_index = current_index;
- if (block->is_ram_block) {
- reg.key.current_addr = current_addr;
- } else {
- reg.key.chunk = chunk;
- }
- reg.chunks = chunks;
-
- trace_qemu_rdma_write_one_sendreg(chunk, sge.length, current_index,
- current_addr);
-
- register_to_network(rdma, ®);
- ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) ®,
- &resp, ®_result_idx, NULL, errp);
- if (ret < 0) {
- return -1;
- }
-
- /* try to overlap this single registration with the one we sent. */
- if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr,
- &sge.lkey, NULL, chunk,
- chunk_start, chunk_end)) {
- error_setg(errp, "cannot get lkey");
- return -1;
- }
-
- reg_result = (RDMARegisterResult *)
- rdma->wr_data[reg_result_idx].control_curr;
-
- network_to_result(reg_result);
-
- trace_qemu_rdma_write_one_recvregres(block->remote_keys[chunk],
- reg_result->rkey, chunk);
-
- block->remote_keys[chunk] = reg_result->rkey;
- block->remote_host_addr = reg_result->host_addr;
- } else {
- /* already registered before */
- if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr,
- &sge.lkey, NULL, chunk,
- chunk_start, chunk_end)) {
- error_setg(errp, "cannot get lkey!");
- return -1;
- }
- }
-
- send_wr.wr.rdma.rkey = block->remote_keys[chunk];
- } else {
- send_wr.wr.rdma.rkey = block->remote_rkey;
-
- if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr,
- &sge.lkey, NULL, chunk,
- chunk_start, chunk_end)) {
- error_setg(errp, "cannot get lkey!");
- return -1;
- }
- }
-
- /*
- * Encode the ram block index and chunk within this wrid.
- * We will use this information at the time of completion
- * to figure out which bitmap to check against and then which
- * chunk in the bitmap to look for.
- */
- send_wr.wr_id = qemu_rdma_make_wrid(RDMA_WRID_RDMA_WRITE,
- current_index, chunk);
-
- send_wr.opcode = IBV_WR_RDMA_WRITE;
- send_wr.send_flags = IBV_SEND_SIGNALED;
- send_wr.sg_list = &sge;
- send_wr.num_sge = 1;
- send_wr.wr.rdma.remote_addr = block->remote_host_addr +
- (current_addr - block->offset);
-
- trace_qemu_rdma_write_one_post(chunk, sge.addr,
send_wr.wr.rdma.remote_addr,
- sge.length);
-
- /*
- * ibv_post_send() does not return negative error numbers,
- * per the specification they are positive - no idea why.
- */
- ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr);
-
- if (ret == ENOMEM) {
- trace_qemu_rdma_write_one_queue_full();
- ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL);
- if (ret < 0) {
- error_setg(errp, "rdma migration: failed to make "
- "room in full send queue!");
- return -1;
- }
-
- goto retry;
-
- } else if (ret > 0) {
- error_setg_errno(errp, ret,
- "rdma migration: post rdma write failed");
- return -1;
- }
-
- set_bit(chunk, block->transit_bitmap);
- stat64_add(&mig_stats.normal_pages, sge.length / qemu_target_page_size());
- /*
- * We are adding to transferred the amount of data written, but no
- * overhead at all. I will assume that RDMA is magicaly and don't
- * need to transfer (at least) the addresses where it wants to
- * write the pages. Here it looks like it should be something
- * like:
- * sizeof(send_wr) + sge.length
- * but this being RDMA, who knows.
- */
- stat64_add(&mig_stats.rdma_bytes, sge.length);
- ram_transferred_add(sge.length);
- rdma->total_writes++;
-
- return 0;
-}
-
-/*
- * Push out any unwritten RDMA operations.
- *
- * We support sending out multiple chunks at the same time.
- * Not all of them need to get signaled in the completion queue.
- */
-static int qemu_rdma_write_flush(RDMAContext *rdma, Error **errp)
-{
- int ret;
-
- if (!rdma->current_length) {
- return 0;
- }
-
- ret = qemu_rdma_write_one(rdma, rdma->current_index, rdma->current_addr,
- rdma->current_length, errp);
-
- if (ret < 0) {
- return -1;
- }
-
- if (ret == 0) {
- rdma->nb_sent++;
- trace_qemu_rdma_write_flush(rdma->nb_sent);
- }
-
- rdma->current_length = 0;
- rdma->current_addr = 0;
-
- return 0;
-}
-
-static inline bool qemu_rdma_buffer_mergeable(RDMAContext *rdma,
- uint64_t offset, uint64_t len)
-{
- RDMALocalBlock *block;
- uint8_t *host_addr;
- uint8_t *chunk_end;
-
- if (rdma->current_index < 0) {
- return false;
- }
-
- if (rdma->current_chunk < 0) {
- return false;
- }
-
- block = &(rdma->local_ram_blocks.block[rdma->current_index]);
- host_addr = block->local_host_addr + (offset - block->offset);
- chunk_end = ram_chunk_end(block, rdma->current_chunk);
-
- if (rdma->current_length == 0) {
- return false;
- }
-
- /*
- * Only merge into chunk sequentially.
- */
- if (offset != (rdma->current_addr + rdma->current_length)) {
- return false;
- }
-
- if (offset < block->offset) {
- return false;
- }
-
- if ((offset + len) > (block->offset + block->length)) {
- return false;
- }
-
- if ((host_addr + len) > chunk_end) {
- return false;
- }
-
- return true;
-}
-
-/*
- * We're not actually writing here, but doing three things:
- *
- * 1. Identify the chunk the buffer belongs to.
- * 2. If the chunk is full or the buffer doesn't belong to the current
- * chunk, then start a new chunk and flush() the old chunk.
- * 3. To keep the hardware busy, we also group chunks into batches
- * and only require that a batch gets acknowledged in the completion
- * queue instead of each individual chunk.
- */
-static int qemu_rdma_write(RDMAContext *rdma,
- uint64_t block_offset, uint64_t offset,
- uint64_t len, Error **errp)
-{
- uint64_t current_addr = block_offset + offset;
- uint64_t index = rdma->current_index;
- uint64_t chunk = rdma->current_chunk;
-
- /* If we cannot merge it, we flush the current buffer first. */
- if (!qemu_rdma_buffer_mergeable(rdma, current_addr, len)) {
- if (qemu_rdma_write_flush(rdma, errp) < 0) {
- return -1;
- }
- rdma->current_length = 0;
- rdma->current_addr = current_addr;
-
- qemu_rdma_search_ram_block(rdma, block_offset,
- offset, len, &index, &chunk);
- rdma->current_index = index;
- rdma->current_chunk = chunk;
- }
-
- /* merge it */
- rdma->current_length += len;
-
- /* flush it if buffer is too large */
- if (rdma->current_length >= RDMA_MERGE_MAX) {
- return qemu_rdma_write_flush(rdma, errp);
- }
-
- return 0;
-}
-
-static void qemu_rdma_cleanup(RDMAContext *rdma)
-{
- Error *err = NULL;
-
- if (rdma->cm_id && rdma->connected) {
- if ((rdma->errored ||
- migrate_get_current()->state == MIGRATION_STATUS_CANCELLING) &&
- !rdma->received_error) {
- RDMAControlHeader head = { .len = 0,
- .type = RDMA_CONTROL_ERROR,
- .repeat = 1,
- };
- warn_report("Early error. Sending error.");
- if (qemu_rdma_post_send_control(rdma, NULL, &head, &err) < 0) {
- warn_report_err(err);
- }
- }
-
- rdma_disconnect(rdma->cm_id);
- trace_qemu_rdma_cleanup_disconnect();
- rdma->connected = false;
- }
-
- if (rdma->channel) {
- qemu_set_fd_handler(rdma->channel->fd, NULL, NULL, NULL);
- }
- g_free(rdma->dest_blocks);
- rdma->dest_blocks = NULL;
-
- for (int i = 0; i < RDMA_WRID_MAX; i++) {
- if (rdma->wr_data[i].control_mr) {
- rdma->total_registrations--;
- ibv_dereg_mr(rdma->wr_data[i].control_mr);
- }
- rdma->wr_data[i].control_mr = NULL;
- }
-
- if (rdma->local_ram_blocks.block) {
- while (rdma->local_ram_blocks.nb_blocks) {
- rdma_delete_block(rdma, &rdma->local_ram_blocks.block[0]);
- }
- }
-
- if (rdma->qp) {
- rdma_destroy_qp(rdma->cm_id);
- rdma->qp = NULL;
- }
- if (rdma->recv_cq) {
- ibv_destroy_cq(rdma->recv_cq);
- rdma->recv_cq = NULL;
- }
- if (rdma->send_cq) {
- ibv_destroy_cq(rdma->send_cq);
- rdma->send_cq = NULL;
- }
- if (rdma->recv_comp_channel) {
- ibv_destroy_comp_channel(rdma->recv_comp_channel);
- rdma->recv_comp_channel = NULL;
- }
- if (rdma->send_comp_channel) {
- ibv_destroy_comp_channel(rdma->send_comp_channel);
- rdma->send_comp_channel = NULL;
- }
- if (rdma->pd) {
- ibv_dealloc_pd(rdma->pd);
- rdma->pd = NULL;
- }
- if (rdma->cm_id) {
- rdma_destroy_id(rdma->cm_id);
- rdma->cm_id = NULL;
- }
-
- /* the destination side, listen_id and channel is shared */
- if (rdma->listen_id) {
- if (!rdma->is_return_path) {
- rdma_destroy_id(rdma->listen_id);
- }
- rdma->listen_id = NULL;
-
- if (rdma->channel) {
- if (!rdma->is_return_path) {
- rdma_destroy_event_channel(rdma->channel);
- }
- rdma->channel = NULL;
- }
- }
-
- if (rdma->channel) {
- rdma_destroy_event_channel(rdma->channel);
- rdma->channel = NULL;
- }
- g_free(rdma->host);
- rdma->host = NULL;
-}
-
-
-static int qemu_rdma_source_init(RDMAContext *rdma, bool pin_all, Error **errp)
-{
- int ret;
-
- /*
- * Will be validated against destination's actual capabilities
- * after the connect() completes.
- */
- rdma->pin_all = pin_all;
-
- ret = qemu_rdma_resolve_host(rdma, errp);
- if (ret < 0) {
- goto err_rdma_source_init;
- }
-
- ret = qemu_rdma_alloc_pd_cq(rdma, errp);
- if (ret < 0) {
- goto err_rdma_source_init;
- }
-
- ret = qemu_rdma_alloc_qp(rdma);
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: rdma migration: error allocating qp!");
- goto err_rdma_source_init;
- }
-
- qemu_rdma_init_ram_blocks(rdma);
-
- /* Build the hash that maps from offset to RAMBlock */
- rdma->blockmap = g_hash_table_new(g_direct_hash, g_direct_equal);
- for (int i = 0; i < rdma->local_ram_blocks.nb_blocks; i++) {
- g_hash_table_insert(rdma->blockmap,
- (void *)(uintptr_t)rdma->local_ram_blocks.block[i].offset,
- &rdma->local_ram_blocks.block[i]);
- }
-
- for (int i = 0; i < RDMA_WRID_MAX; i++) {
- ret = qemu_rdma_reg_control(rdma, i);
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: rdma migration: error "
- "registering %d control!", i);
- goto err_rdma_source_init;
- }
- }
-
- return 0;
-
-err_rdma_source_init:
- qemu_rdma_cleanup(rdma);
- return -1;
-}
-
-static int qemu_get_cm_event_timeout(RDMAContext *rdma,
- struct rdma_cm_event **cm_event,
- long msec, Error **errp)
-{
- int ret;
- struct pollfd poll_fd = {
- .fd = rdma->channel->fd,
- .events = POLLIN,
- .revents = 0
- };
-
- do {
- ret = poll(&poll_fd, 1, msec);
- } while (ret < 0 && errno == EINTR);
-
- if (ret == 0) {
- error_setg(errp, "RDMA ERROR: poll cm event timeout");
- return -1;
- } else if (ret < 0) {
- error_setg(errp, "RDMA ERROR: failed to poll cm event, errno=%i",
- errno);
- return -1;
- } else if (poll_fd.revents & POLLIN) {
- if (rdma_get_cm_event(rdma->channel, cm_event) < 0) {
- error_setg(errp, "RDMA ERROR: failed to get cm event");
- return -1;
- }
- return 0;
- } else {
- error_setg(errp, "RDMA ERROR: no POLLIN event, revent=%x",
- poll_fd.revents);
- return -1;
- }
-}
-
-static int qemu_rdma_connect(RDMAContext *rdma, bool return_path,
- Error **errp)
-{
- RDMACapabilities cap = {
- .version = RDMA_CONTROL_VERSION_CURRENT,
- .flags = 0,
- };
- struct rdma_conn_param conn_param = { .initiator_depth = 2,
- .retry_count = 5,
- .private_data = &cap,
- .private_data_len = sizeof(cap),
- };
- struct rdma_cm_event *cm_event;
- int ret;
-
- /*
- * Only negotiate the capability with destination if the user
- * on the source first requested the capability.
- */
- if (rdma->pin_all) {
- trace_qemu_rdma_connect_pin_all_requested();
- cap.flags |= RDMA_CAPABILITY_PIN_ALL;
- }
-
- caps_to_network(&cap);
-
- ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp);
- if (ret < 0) {
- goto err_rdma_source_connect;
- }
-
- ret = rdma_connect(rdma->cm_id, &conn_param);
- if (ret < 0) {
- error_setg_errno(errp, errno,
- "RDMA ERROR: connecting to destination!");
- goto err_rdma_source_connect;
- }
-
- if (return_path) {
- ret = qemu_get_cm_event_timeout(rdma, &cm_event, 5000, errp);
- } else {
- ret = rdma_get_cm_event(rdma->channel, &cm_event);
- if (ret < 0) {
- error_setg_errno(errp, errno,
- "RDMA ERROR: failed to get cm event");
- }
- }
- if (ret < 0) {
- goto err_rdma_source_connect;
- }
-
- if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) {
- error_setg(errp, "RDMA ERROR: connecting to destination!");
- rdma_ack_cm_event(cm_event);
- goto err_rdma_source_connect;
- }
- rdma->connected = true;
-
- memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap));
- network_to_caps(&cap);
-
- /*
- * Verify that the *requested* capabilities are supported by the
destination
- * and disable them otherwise.
- */
- if (rdma->pin_all && !(cap.flags & RDMA_CAPABILITY_PIN_ALL)) {
- warn_report("RDMA: Server cannot support pinning all memory. "
- "Will register memory dynamically.");
- rdma->pin_all = false;
- }
-
- trace_qemu_rdma_connect_pin_all_outcome(rdma->pin_all);
-
- rdma_ack_cm_event(cm_event);
-
- rdma->control_ready_expected = 1;
- rdma->nb_sent = 0;
- return 0;
-
-err_rdma_source_connect:
- qemu_rdma_cleanup(rdma);
- return -1;
-}
-
-static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
-{
- Error *err = NULL;
- int ret;
- struct rdma_cm_id *listen_id;
- char ip[40] = "unknown";
- struct rdma_addrinfo *res, *e;
- char port_str[16];
- int reuse = 1;
-
- for (int i = 0; i < RDMA_WRID_MAX; i++) {
- rdma->wr_data[i].control_len = 0;
- rdma->wr_data[i].control_curr = NULL;
- }
-
- if (!rdma->host || !rdma->host[0]) {
- error_setg(errp, "RDMA ERROR: RDMA host is not set!");
- rdma->errored = true;
- return -1;
- }
- /* create CM channel */
- rdma->channel = rdma_create_event_channel();
- if (!rdma->channel) {
- error_setg(errp, "RDMA ERROR: could not create rdma event channel");
- rdma->errored = true;
- return -1;
- }
-
- /* create CM id */
- ret = rdma_create_id(rdma->channel, &listen_id, NULL, RDMA_PS_TCP);
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: could not create cm_id!");
- goto err_dest_init_create_listen_id;
- }
-
- snprintf(port_str, 16, "%d", rdma->port);
- port_str[15] = '\0';
-
- ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
- if (ret) {
- error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s",
- rdma->host);
- goto err_dest_init_bind_addr;
- }
-
- ret = rdma_set_option(listen_id, RDMA_OPTION_ID, RDMA_OPTION_ID_REUSEADDR,
- &reuse, sizeof reuse);
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: Error: could not set REUSEADDR option");
- goto err_dest_init_bind_addr;
- }
-
- /* Try all addresses, saving the first error in @err */
- for (e = res; e != NULL; e = e->ai_next) {
- Error **local_errp = err ? NULL : &err;
-
- inet_ntop(e->ai_family,
- &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip);
- trace_qemu_rdma_dest_init_trying(rdma->host, ip);
- ret = rdma_bind_addr(listen_id, e->ai_dst_addr);
- if (ret < 0) {
- continue;
- }
- if (e->ai_family == AF_INET6) {
- ret = qemu_rdma_broken_ipv6_kernel(listen_id->verbs,
- local_errp);
- if (ret < 0) {
- continue;
- }
- }
- error_free(err);
- break;
- }
-
- rdma_freeaddrinfo(res);
- if (!e) {
- if (err) {
- error_propagate(errp, err);
- } else {
- error_setg(errp, "RDMA ERROR: Error: could not rdma_bind_addr!");
- }
- goto err_dest_init_bind_addr;
- }
-
- rdma->listen_id = listen_id;
- qemu_rdma_dump_gid("dest_init", listen_id);
- return 0;
-
-err_dest_init_bind_addr:
- rdma_destroy_id(listen_id);
-err_dest_init_create_listen_id:
- rdma_destroy_event_channel(rdma->channel);
- rdma->channel = NULL;
- rdma->errored = true;
- return -1;
-
-}
-
-static void qemu_rdma_return_path_dest_init(RDMAContext *rdma_return_path,
- RDMAContext *rdma)
-{
- for (int i = 0; i < RDMA_WRID_MAX; i++) {
- rdma_return_path->wr_data[i].control_len = 0;
- rdma_return_path->wr_data[i].control_curr = NULL;
- }
-
- /*the CM channel and CM id is shared*/
- rdma_return_path->channel = rdma->channel;
- rdma_return_path->listen_id = rdma->listen_id;
-
- rdma->return_path = rdma_return_path;
- rdma_return_path->return_path = rdma;
- rdma_return_path->is_return_path = true;
-}
-
-static RDMAContext *qemu_rdma_data_init(InetSocketAddress *saddr, Error **errp)
-{
- RDMAContext *rdma = NULL;
-
- rdma = g_new0(RDMAContext, 1);
- rdma->current_index = -1;
- rdma->current_chunk = -1;
-
- rdma->host = g_strdup(saddr->host);
- rdma->port = atoi(saddr->port);
- return rdma;
-}
-
-/*
- * QEMUFile interface to the control channel.
- * SEND messages for control only.
- * VM's ram is handled with regular RDMA messages.
- */
-static ssize_t qio_channel_rdma_writev(QIOChannel *ioc,
- const struct iovec *iov,
- size_t niov,
- int *fds,
- size_t nfds,
- int flags,
- Error **errp)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
- RDMAContext *rdma;
- int ret;
- ssize_t done = 0;
- size_t len;
-
- RCU_READ_LOCK_GUARD();
- rdma = qatomic_rcu_read(&rioc->rdmaout);
-
- if (!rdma) {
- error_setg(errp, "RDMA control channel output is not set");
- return -1;
- }
-
- if (rdma->errored) {
- error_setg(errp,
- "RDMA is in an error state waiting migration to abort!");
- return -1;
- }
-
- /*
- * Push out any writes that
- * we're queued up for VM's ram.
- */
- ret = qemu_rdma_write_flush(rdma, errp);
- if (ret < 0) {
- rdma->errored = true;
- return -1;
- }
-
- for (int i = 0; i < niov; i++) {
- size_t remaining = iov[i].iov_len;
- uint8_t * data = (void *)iov[i].iov_base;
- while (remaining) {
- RDMAControlHeader head = {};
-
- len = MIN(remaining, RDMA_SEND_INCREMENT);
- remaining -= len;
-
- head.len = len;
- head.type = RDMA_CONTROL_QEMU_FILE;
-
- ret = qemu_rdma_exchange_send(rdma, &head,
- data, NULL, NULL, NULL, errp);
-
- if (ret < 0) {
- rdma->errored = true;
- return -1;
- }
-
- data += len;
- done += len;
- }
- }
-
- return done;
-}
-
-static size_t qemu_rdma_fill(RDMAContext *rdma, uint8_t *buf,
- size_t size, int idx)
-{
- size_t len = 0;
-
- if (rdma->wr_data[idx].control_len) {
- trace_qemu_rdma_fill(rdma->wr_data[idx].control_len, size);
-
- len = MIN(size, rdma->wr_data[idx].control_len);
- memcpy(buf, rdma->wr_data[idx].control_curr, len);
- rdma->wr_data[idx].control_curr += len;
- rdma->wr_data[idx].control_len -= len;
- }
-
- return len;
-}
-
-/*
- * QEMUFile interface to the control channel.
- * RDMA links don't use bytestreams, so we have to
- * return bytes to QEMUFile opportunistically.
- */
-static ssize_t qio_channel_rdma_readv(QIOChannel *ioc,
- const struct iovec *iov,
- size_t niov,
- int **fds,
- size_t *nfds,
- int flags,
- Error **errp)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
- RDMAContext *rdma;
- RDMAControlHeader head;
- int ret;
- ssize_t done = 0;
- size_t len;
-
- RCU_READ_LOCK_GUARD();
- rdma = qatomic_rcu_read(&rioc->rdmain);
-
- if (!rdma) {
- error_setg(errp, "RDMA control channel input is not set");
- return -1;
- }
-
- if (rdma->errored) {
- error_setg(errp,
- "RDMA is in an error state waiting migration to abort!");
- return -1;
- }
-
- for (int i = 0; i < niov; i++) {
- size_t want = iov[i].iov_len;
- uint8_t *data = (void *)iov[i].iov_base;
-
- /*
- * First, we hold on to the last SEND message we
- * were given and dish out the bytes until we run
- * out of bytes.
- */
- len = qemu_rdma_fill(rdma, data, want, 0);
- done += len;
- want -= len;
- /* Got what we needed, so go to next iovec */
- if (want == 0) {
- continue;
- }
-
- /* If we got any data so far, then don't wait
- * for more, just return what we have */
- if (done > 0) {
- break;
- }
-
-
- /* We've got nothing at all, so lets wait for
- * more to arrive
- */
- ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_QEMU_FILE,
- errp);
-
- if (ret < 0) {
- rdma->errored = true;
- return -1;
- }
-
- /*
- * SEND was received with new bytes, now try again.
- */
- len = qemu_rdma_fill(rdma, data, want, 0);
- done += len;
- want -= len;
-
- /* Still didn't get enough, so lets just return */
- if (want) {
- if (done == 0) {
- return QIO_CHANNEL_ERR_BLOCK;
- } else {
- break;
- }
- }
- }
- return done;
-}
-
-/*
- * Block until all the outstanding chunks have been delivered by the hardware.
- */
-static int qemu_rdma_drain_cq(RDMAContext *rdma)
-{
- Error *err = NULL;
-
- if (qemu_rdma_write_flush(rdma, &err) < 0) {
- error_report_err(err);
- return -1;
- }
-
- while (rdma->nb_sent) {
- if (qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL) < 0) {
- error_report("rdma migration: complete polling error!");
- return -1;
- }
- }
-
- qemu_rdma_unregister_waiting(rdma);
-
- return 0;
-}
-
-
-static int qio_channel_rdma_set_blocking(QIOChannel *ioc,
- bool blocking,
- Error **errp)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
- /* XXX we should make readv/writev actually honour this :-) */
- rioc->blocking = blocking;
- return 0;
-}
-
-
-typedef struct QIOChannelRDMASource QIOChannelRDMASource;
-struct QIOChannelRDMASource {
- GSource parent;
- QIOChannelRDMA *rioc;
- GIOCondition condition;
-};
-
-static gboolean
-qio_channel_rdma_source_prepare(GSource *source,
- gint *timeout)
-{
- QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
- RDMAContext *rdma;
- GIOCondition cond = 0;
- *timeout = -1;
-
- RCU_READ_LOCK_GUARD();
- if (rsource->condition == G_IO_IN) {
- rdma = qatomic_rcu_read(&rsource->rioc->rdmain);
- } else {
- rdma = qatomic_rcu_read(&rsource->rioc->rdmaout);
- }
-
- if (!rdma) {
- error_report("RDMAContext is NULL when prepare Gsource");
- return FALSE;
- }
-
- if (rdma->wr_data[0].control_len) {
- cond |= G_IO_IN;
- }
- cond |= G_IO_OUT;
-
- return cond & rsource->condition;
-}
-
-static gboolean
-qio_channel_rdma_source_check(GSource *source)
-{
- QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
- RDMAContext *rdma;
- GIOCondition cond = 0;
-
- RCU_READ_LOCK_GUARD();
- if (rsource->condition == G_IO_IN) {
- rdma = qatomic_rcu_read(&rsource->rioc->rdmain);
- } else {
- rdma = qatomic_rcu_read(&rsource->rioc->rdmaout);
- }
-
- if (!rdma) {
- error_report("RDMAContext is NULL when check Gsource");
- return FALSE;
- }
-
- if (rdma->wr_data[0].control_len) {
- cond |= G_IO_IN;
- }
- cond |= G_IO_OUT;
-
- return cond & rsource->condition;
-}
-
-static gboolean
-qio_channel_rdma_source_dispatch(GSource *source,
- GSourceFunc callback,
- gpointer user_data)
-{
- QIOChannelFunc func = (QIOChannelFunc)callback;
- QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
- RDMAContext *rdma;
- GIOCondition cond = 0;
-
- RCU_READ_LOCK_GUARD();
- if (rsource->condition == G_IO_IN) {
- rdma = qatomic_rcu_read(&rsource->rioc->rdmain);
- } else {
- rdma = qatomic_rcu_read(&rsource->rioc->rdmaout);
- }
-
- if (!rdma) {
- error_report("RDMAContext is NULL when dispatch Gsource");
- return FALSE;
- }
-
- if (rdma->wr_data[0].control_len) {
- cond |= G_IO_IN;
- }
- cond |= G_IO_OUT;
-
- return (*func)(QIO_CHANNEL(rsource->rioc),
- (cond & rsource->condition),
- user_data);
-}
-
-static void
-qio_channel_rdma_source_finalize(GSource *source)
-{
- QIOChannelRDMASource *ssource = (QIOChannelRDMASource *)source;
-
- object_unref(OBJECT(ssource->rioc));
-}
-
-static GSourceFuncs qio_channel_rdma_source_funcs = {
- qio_channel_rdma_source_prepare,
- qio_channel_rdma_source_check,
- qio_channel_rdma_source_dispatch,
- qio_channel_rdma_source_finalize
-};
-
-static GSource *qio_channel_rdma_create_watch(QIOChannel *ioc,
- GIOCondition condition)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
- QIOChannelRDMASource *ssource;
- GSource *source;
-
- source = g_source_new(&qio_channel_rdma_source_funcs,
- sizeof(QIOChannelRDMASource));
- ssource = (QIOChannelRDMASource *)source;
-
- ssource->rioc = rioc;
- object_ref(OBJECT(rioc));
-
- ssource->condition = condition;
-
- return source;
-}
-
-static void qio_channel_rdma_set_aio_fd_handler(QIOChannel *ioc,
- AioContext *read_ctx,
- IOHandler *io_read,
- AioContext *write_ctx,
- IOHandler *io_write,
- void *opaque)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
- if (io_read) {
- aio_set_fd_handler(read_ctx, rioc->rdmain->recv_comp_channel->fd,
- io_read, io_write, NULL, NULL, opaque);
- aio_set_fd_handler(read_ctx, rioc->rdmain->send_comp_channel->fd,
- io_read, io_write, NULL, NULL, opaque);
- } else {
- aio_set_fd_handler(write_ctx, rioc->rdmaout->recv_comp_channel->fd,
- io_read, io_write, NULL, NULL, opaque);
- aio_set_fd_handler(write_ctx, rioc->rdmaout->send_comp_channel->fd,
- io_read, io_write, NULL, NULL, opaque);
- }
-}
-
-struct rdma_close_rcu {
- struct rcu_head rcu;
- RDMAContext *rdmain;
- RDMAContext *rdmaout;
-};
-
-/* callback from qio_channel_rdma_close via call_rcu */
-static void qio_channel_rdma_close_rcu(struct rdma_close_rcu *rcu)
-{
- if (rcu->rdmain) {
- qemu_rdma_cleanup(rcu->rdmain);
- }
-
- if (rcu->rdmaout) {
- qemu_rdma_cleanup(rcu->rdmaout);
- }
-
- g_free(rcu->rdmain);
- g_free(rcu->rdmaout);
- g_free(rcu);
-}
-
-static int qio_channel_rdma_close(QIOChannel *ioc,
- Error **errp)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
- RDMAContext *rdmain, *rdmaout;
- struct rdma_close_rcu *rcu = g_new(struct rdma_close_rcu, 1);
-
- trace_qemu_rdma_close();
-
- rdmain = rioc->rdmain;
- if (rdmain) {
- qatomic_rcu_set(&rioc->rdmain, NULL);
- }
-
- rdmaout = rioc->rdmaout;
- if (rdmaout) {
- qatomic_rcu_set(&rioc->rdmaout, NULL);
- }
-
- rcu->rdmain = rdmain;
- rcu->rdmaout = rdmaout;
- call_rcu(rcu, qio_channel_rdma_close_rcu, rcu);
-
- return 0;
-}
-
-static int
-qio_channel_rdma_shutdown(QIOChannel *ioc,
- QIOChannelShutdown how,
- Error **errp)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
- RDMAContext *rdmain, *rdmaout;
-
- RCU_READ_LOCK_GUARD();
-
- rdmain = qatomic_rcu_read(&rioc->rdmain);
- rdmaout = qatomic_rcu_read(&rioc->rdmain);
-
- switch (how) {
- case QIO_CHANNEL_SHUTDOWN_READ:
- if (rdmain) {
- rdmain->errored = true;
- }
- break;
- case QIO_CHANNEL_SHUTDOWN_WRITE:
- if (rdmaout) {
- rdmaout->errored = true;
- }
- break;
- case QIO_CHANNEL_SHUTDOWN_BOTH:
- default:
- if (rdmain) {
- rdmain->errored = true;
- }
- if (rdmaout) {
- rdmaout->errored = true;
- }
- break;
- }
-
- return 0;
-}
-
-/*
- * Parameters:
- * @offset == 0 :
- * This means that 'block_offset' is a full virtual address that does
not
- * belong to a RAMBlock of the virtual machine and instead
- * represents a private malloc'd memory area that the caller wishes to
- * transfer.
- *
- * @offset != 0 :
- * Offset is an offset to be added to block_offset and used
- * to also lookup the corresponding RAMBlock.
- *
- * @size : Number of bytes to transfer
- *
- * @pages_sent : User-specificed pointer to indicate how many pages were
- * sent. Usually, this will not be more than a few bytes of
- * the protocol because most transfers are sent
asynchronously.
- */
-static int qemu_rdma_save_page(QEMUFile *f, ram_addr_t block_offset,
- ram_addr_t offset, size_t size)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
- Error *err = NULL;
- RDMAContext *rdma;
- int ret;
-
- RCU_READ_LOCK_GUARD();
- rdma = qatomic_rcu_read(&rioc->rdmaout);
-
- if (!rdma) {
- return -1;
- }
-
- if (rdma_errored(rdma)) {
- return -1;
- }
-
- qemu_fflush(f);
-
- /*
- * Add this page to the current 'chunk'. If the chunk
- * is full, or the page doesn't belong to the current chunk,
- * an actual RDMA write will occur and a new chunk will be formed.
- */
- ret = qemu_rdma_write(rdma, block_offset, offset, size, &err);
- if (ret < 0) {
- error_report_err(err);
- goto err;
- }
-
- /*
- * Drain the Completion Queue if possible, but do not block,
- * just poll.
- *
- * If nothing to poll, the end of the iteration will do this
- * again to make sure we don't overflow the request queue.
- */
- while (1) {
- uint64_t wr_id, wr_id_in;
- ret = qemu_rdma_poll(rdma, rdma->recv_cq, &wr_id_in, NULL);
-
- if (ret < 0) {
- error_report("rdma migration: polling error");
- goto err;
- }
-
- wr_id = wr_id_in & RDMA_WRID_TYPE_MASK;
-
- if (wr_id == RDMA_WRID_NONE) {
- break;
- }
- }
-
- while (1) {
- uint64_t wr_id, wr_id_in;
- ret = qemu_rdma_poll(rdma, rdma->send_cq, &wr_id_in, NULL);
-
- if (ret < 0) {
- error_report("rdma migration: polling error");
- goto err;
- }
-
- wr_id = wr_id_in & RDMA_WRID_TYPE_MASK;
-
- if (wr_id == RDMA_WRID_NONE) {
- break;
- }
- }
-
- return RAM_SAVE_CONTROL_DELAYED;
-
-err:
- rdma->errored = true;
- return -1;
-}
-
-int rdma_control_save_page(QEMUFile *f, ram_addr_t block_offset,
- ram_addr_t offset, size_t size)
-{
- if (!migrate_rdma() || migration_in_postcopy()) {
- return RAM_SAVE_CONTROL_NOT_SUPP;
- }
-
- int ret = qemu_rdma_save_page(f, block_offset, offset, size);
-
- if (ret != RAM_SAVE_CONTROL_DELAYED &&
- ret != RAM_SAVE_CONTROL_NOT_SUPP) {
- if (ret < 0) {
- qemu_file_set_error(f, ret);
- }
- }
- return ret;
-}
-
-static void rdma_accept_incoming_migration(void *opaque);
-
-static void rdma_cm_poll_handler(void *opaque)
-{
- RDMAContext *rdma = opaque;
- struct rdma_cm_event *cm_event;
- MigrationIncomingState *mis = migration_incoming_get_current();
-
- if (rdma_get_cm_event(rdma->channel, &cm_event) < 0) {
- error_report("get_cm_event failed %d", errno);
- return;
- }
-
- if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED ||
- cm_event->event == RDMA_CM_EVENT_DEVICE_REMOVAL) {
- if (!rdma->errored &&
- migration_incoming_get_current()->state !=
- MIGRATION_STATUS_COMPLETED) {
- error_report("receive cm event, cm event is %d", cm_event->event);
- rdma->errored = true;
- if (rdma->return_path) {
- rdma->return_path->errored = true;
- }
- }
- rdma_ack_cm_event(cm_event);
- if (mis->loadvm_co) {
- qemu_coroutine_enter(mis->loadvm_co);
- }
- return;
- }
- rdma_ack_cm_event(cm_event);
-}
-
-static int qemu_rdma_accept(RDMAContext *rdma)
-{
- Error *err = NULL;
- RDMACapabilities cap;
- struct rdma_conn_param conn_param = {
- .responder_resources = 2,
- .private_data = &cap,
- .private_data_len = sizeof(cap),
- };
- RDMAContext *rdma_return_path = NULL;
- g_autoptr(InetSocketAddress) isock = g_new0(InetSocketAddress, 1);
- struct rdma_cm_event *cm_event;
- struct ibv_context *verbs;
- int ret;
-
- ret = rdma_get_cm_event(rdma->channel, &cm_event);
- if (ret < 0) {
- goto err_rdma_dest_wait;
- }
-
- if (cm_event->event != RDMA_CM_EVENT_CONNECT_REQUEST) {
- rdma_ack_cm_event(cm_event);
- goto err_rdma_dest_wait;
- }
-
- isock->host = g_strdup(rdma->host);
- isock->port = g_strdup_printf("%d", rdma->port);
-
- /*
- * initialize the RDMAContext for return path for postcopy after first
- * connection request reached.
- */
- if ((migrate_postcopy() || migrate_return_path())
- && !rdma->is_return_path) {
- rdma_return_path = qemu_rdma_data_init(isock, NULL);
- if (rdma_return_path == NULL) {
- rdma_ack_cm_event(cm_event);
- goto err_rdma_dest_wait;
- }
-
- qemu_rdma_return_path_dest_init(rdma_return_path, rdma);
- }
-
- memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap));
-
- network_to_caps(&cap);
-
- if (cap.version < 1 || cap.version > RDMA_CONTROL_VERSION_CURRENT) {
- error_report("Unknown source RDMA version: %d, bailing...",
- cap.version);
- rdma_ack_cm_event(cm_event);
- goto err_rdma_dest_wait;
- }
-
- /*
- * Respond with only the capabilities this version of QEMU knows about.
- */
- cap.flags &= known_capabilities;
-
- /*
- * Enable the ones that we do know about.
- * Add other checks here as new ones are introduced.
- */
- if (cap.flags & RDMA_CAPABILITY_PIN_ALL) {
- rdma->pin_all = true;
- }
-
- rdma->cm_id = cm_event->id;
- verbs = cm_event->id->verbs;
-
- rdma_ack_cm_event(cm_event);
-
- trace_qemu_rdma_accept_pin_state(rdma->pin_all);
-
- caps_to_network(&cap);
-
- trace_qemu_rdma_accept_pin_verbsc(verbs);
-
- if (!rdma->verbs) {
- rdma->verbs = verbs;
- } else if (rdma->verbs != verbs) {
- error_report("ibv context not matching %p, %p!", rdma->verbs,
- verbs);
- goto err_rdma_dest_wait;
- }
-
- qemu_rdma_dump_id("dest_init", verbs);
-
- ret = qemu_rdma_alloc_pd_cq(rdma, &err);
- if (ret < 0) {
- error_report_err(err);
- goto err_rdma_dest_wait;
- }
-
- ret = qemu_rdma_alloc_qp(rdma);
- if (ret < 0) {
- error_report("rdma migration: error allocating qp!");
- goto err_rdma_dest_wait;
- }
-
- qemu_rdma_init_ram_blocks(rdma);
-
- for (int i = 0; i < RDMA_WRID_MAX; i++) {
- ret = qemu_rdma_reg_control(rdma, i);
- if (ret < 0) {
- error_report("rdma: error registering %d control", i);
- goto err_rdma_dest_wait;
- }
- }
-
- /* Accept the second connection request for return path */
- if ((migrate_postcopy() || migrate_return_path())
- && !rdma->is_return_path) {
- qemu_set_fd_handler(rdma->channel->fd, rdma_accept_incoming_migration,
- NULL,
- (void *)(intptr_t)rdma->return_path);
- } else {
- qemu_set_fd_handler(rdma->channel->fd, rdma_cm_poll_handler,
- NULL, rdma);
- }
-
- ret = rdma_accept(rdma->cm_id, &conn_param);
- if (ret < 0) {
- error_report("rdma_accept failed");
- goto err_rdma_dest_wait;
- }
-
- ret = rdma_get_cm_event(rdma->channel, &cm_event);
- if (ret < 0) {
- error_report("rdma_accept get_cm_event failed");
- goto err_rdma_dest_wait;
- }
-
- if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) {
- error_report("rdma_accept not event established");
- rdma_ack_cm_event(cm_event);
- goto err_rdma_dest_wait;
- }
-
- rdma_ack_cm_event(cm_event);
- rdma->connected = true;
-
- ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, &err);
- if (ret < 0) {
- error_report_err(err);
- goto err_rdma_dest_wait;
- }
-
- qemu_rdma_dump_gid("dest_connect", rdma->cm_id);
-
- return 0;
-
-err_rdma_dest_wait:
- rdma->errored = true;
- qemu_rdma_cleanup(rdma);
- g_free(rdma_return_path);
- return -1;
-}
-
-static int dest_ram_sort_func(const void *a, const void *b)
-{
- unsigned int a_index = ((const RDMALocalBlock *)a)->src_index;
- unsigned int b_index = ((const RDMALocalBlock *)b)->src_index;
-
- return (a_index < b_index) ? -1 : (a_index != b_index);
-}
-
-/*
- * During each iteration of the migration, we listen for instructions
- * by the source VM to perform dynamic page registrations before they
- * can perform RDMA operations.
- *
- * We respond with the 'rkey'.
- *
- * Keep doing this until the source tells us to stop.
- */
-int rdma_registration_handle(QEMUFile *f)
-{
- RDMAControlHeader reg_resp = { .len = sizeof(RDMARegisterResult),
- .type = RDMA_CONTROL_REGISTER_RESULT,
- .repeat = 0,
- };
- RDMAControlHeader unreg_resp = { .len = 0,
- .type = RDMA_CONTROL_UNREGISTER_FINISHED,
- .repeat = 0,
- };
- RDMAControlHeader blocks = { .type = RDMA_CONTROL_RAM_BLOCKS_RESULT,
- .repeat = 1 };
- QIOChannelRDMA *rioc;
- Error *err = NULL;
- RDMAContext *rdma;
- RDMALocalBlocks *local;
- RDMAControlHeader head;
- RDMARegister *reg, *registers;
- RDMACompress *comp;
- RDMARegisterResult *reg_result;
- static RDMARegisterResult results[RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE];
- RDMALocalBlock *block;
- void *host_addr;
- int ret;
- int idx = 0;
-
- if (!migrate_rdma()) {
- return 0;
- }
-
- RCU_READ_LOCK_GUARD();
- rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
- rdma = qatomic_rcu_read(&rioc->rdmain);
-
- if (!rdma) {
- return -1;
- }
-
- if (rdma_errored(rdma)) {
- return -1;
- }
-
- local = &rdma->local_ram_blocks;
- do {
- trace_rdma_registration_handle_wait();
-
- ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_NONE, &err);
-
- if (ret < 0) {
- error_report_err(err);
- break;
- }
-
- if (head.repeat > RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE) {
- error_report("rdma: Too many requests in this message (%d)."
- "Bailing.", head.repeat);
- break;
- }
-
- switch (head.type) {
- case RDMA_CONTROL_COMPRESS:
- comp = (RDMACompress *) rdma->wr_data[idx].control_curr;
- network_to_compress(comp);
-
- trace_rdma_registration_handle_compress(comp->length,
- comp->block_idx,
- comp->offset);
- if (comp->block_idx >= rdma->local_ram_blocks.nb_blocks) {
- error_report("rdma: 'compress' bad block index %u (vs %d)",
- (unsigned int)comp->block_idx,
- rdma->local_ram_blocks.nb_blocks);
- goto err;
- }
- block = &(rdma->local_ram_blocks.block[comp->block_idx]);
-
- host_addr = block->local_host_addr +
- (comp->offset - block->offset);
- if (comp->value) {
- error_report("rdma: Zero page with non-zero (%d) value",
- comp->value);
- goto err;
- }
- ram_handle_zero(host_addr, comp->length);
- break;
-
- case RDMA_CONTROL_REGISTER_FINISHED:
- trace_rdma_registration_handle_finished();
- return 0;
-
- case RDMA_CONTROL_RAM_BLOCKS_REQUEST:
- trace_rdma_registration_handle_ram_blocks();
-
- /* Sort our local RAM Block list so it's the same as the source,
- * we can do this since we've filled in a src_index in the list
- * as we received the RAMBlock list earlier.
- */
- qsort(rdma->local_ram_blocks.block,
- rdma->local_ram_blocks.nb_blocks,
- sizeof(RDMALocalBlock), dest_ram_sort_func);
- for (int i = 0; i < local->nb_blocks; i++) {
- local->block[i].index = i;
- }
-
- if (rdma->pin_all) {
- ret = qemu_rdma_reg_whole_ram_blocks(rdma, &err);
- if (ret < 0) {
- error_report_err(err);
- goto err;
- }
- }
-
- /*
- * Dest uses this to prepare to transmit the RAMBlock descriptions
- * to the source VM after connection setup.
- * Both sides use the "remote" structure to communicate and update
- * their "local" descriptions with what was sent.
- */
- for (int i = 0; i < local->nb_blocks; i++) {
- rdma->dest_blocks[i].remote_host_addr =
- (uintptr_t)(local->block[i].local_host_addr);
-
- if (rdma->pin_all) {
- rdma->dest_blocks[i].remote_rkey =
local->block[i].mr->rkey;
- }
-
- rdma->dest_blocks[i].offset = local->block[i].offset;
- rdma->dest_blocks[i].length = local->block[i].length;
-
- dest_block_to_network(&rdma->dest_blocks[i]);
- trace_rdma_registration_handle_ram_blocks_loop(
- local->block[i].block_name,
- local->block[i].offset,
- local->block[i].length,
- local->block[i].local_host_addr,
- local->block[i].src_index);
- }
-
- blocks.len = rdma->local_ram_blocks.nb_blocks
- * sizeof(RDMADestBlock);
-
-
- ret = qemu_rdma_post_send_control(rdma,
- (uint8_t *) rdma->dest_blocks, &blocks,
- &err);
-
- if (ret < 0) {
- error_report_err(err);
- goto err;
- }
-
- break;
- case RDMA_CONTROL_REGISTER_REQUEST:
- trace_rdma_registration_handle_register(head.repeat);
-
- reg_resp.repeat = head.repeat;
- registers = (RDMARegister *) rdma->wr_data[idx].control_curr;
-
- for (int count = 0; count < head.repeat; count++) {
- uint64_t chunk;
- uint8_t *chunk_start, *chunk_end;
-
- reg = ®isters[count];
- network_to_register(reg);
-
- reg_result = &results[count];
-
- trace_rdma_registration_handle_register_loop(count,
- reg->current_index, reg->key.current_addr,
reg->chunks);
-
- if (reg->current_index >= rdma->local_ram_blocks.nb_blocks) {
- error_report("rdma: 'register' bad block index %u (vs %d)",
- (unsigned int)reg->current_index,
- rdma->local_ram_blocks.nb_blocks);
- goto err;
- }
- block = &(rdma->local_ram_blocks.block[reg->current_index]);
- if (block->is_ram_block) {
- if (block->offset > reg->key.current_addr) {
- error_report("rdma: bad register address for block %s"
- " offset: %" PRIx64 " current_addr: %" PRIx64,
- block->block_name, block->offset,
- reg->key.current_addr);
- goto err;
- }
- host_addr = (block->local_host_addr +
- (reg->key.current_addr - block->offset));
- chunk = ram_chunk_index(block->local_host_addr,
- (uint8_t *) host_addr);
- } else {
- chunk = reg->key.chunk;
- host_addr = block->local_host_addr +
- (reg->key.chunk * (1UL << RDMA_REG_CHUNK_SHIFT));
- /* Check for particularly bad chunk value */
- if (host_addr < (void *)block->local_host_addr) {
- error_report("rdma: bad chunk for block %s"
- " chunk: %" PRIx64,
- block->block_name, reg->key.chunk);
- goto err;
- }
- }
- chunk_start = ram_chunk_start(block, chunk);
- chunk_end = ram_chunk_end(block, chunk + reg->chunks);
- /* avoid "-Waddress-of-packed-member" warning */
- uint32_t tmp_rkey = 0;
- if (qemu_rdma_register_and_get_keys(rdma, block,
- (uintptr_t)host_addr, NULL, &tmp_rkey,
- chunk, chunk_start, chunk_end)) {
- error_report("cannot get rkey");
- goto err;
- }
- reg_result->rkey = tmp_rkey;
-
- reg_result->host_addr = (uintptr_t)block->local_host_addr;
-
- trace_rdma_registration_handle_register_rkey(reg_result->rkey);
-
- result_to_network(reg_result);
- }
-
- ret = qemu_rdma_post_send_control(rdma,
- (uint8_t *) results, ®_resp, &err);
-
- if (ret < 0) {
- error_report_err(err);
- goto err;
- }
- break;
- case RDMA_CONTROL_UNREGISTER_REQUEST:
- trace_rdma_registration_handle_unregister(head.repeat);
- unreg_resp.repeat = head.repeat;
- registers = (RDMARegister *) rdma->wr_data[idx].control_curr;
-
- for (int count = 0; count < head.repeat; count++) {
- reg = ®isters[count];
- network_to_register(reg);
-
- trace_rdma_registration_handle_unregister_loop(count,
- reg->current_index, reg->key.chunk);
-
- block = &(rdma->local_ram_blocks.block[reg->current_index]);
-
- ret = ibv_dereg_mr(block->pmr[reg->key.chunk]);
- block->pmr[reg->key.chunk] = NULL;
-
- if (ret != 0) {
- error_report("rdma unregistration chunk failed: %s",
- strerror(errno));
- goto err;
- }
-
- rdma->total_registrations--;
-
-
trace_rdma_registration_handle_unregister_success(reg->key.chunk);
- }
-
- ret = qemu_rdma_post_send_control(rdma, NULL, &unreg_resp, &err);
-
- if (ret < 0) {
- error_report_err(err);
- goto err;
- }
- break;
- case RDMA_CONTROL_REGISTER_RESULT:
- error_report("Invalid RESULT message at dest.");
- goto err;
- default:
- error_report("Unknown control message %s",
control_desc(head.type));
- goto err;
- }
- } while (1);
-
-err:
- rdma->errored = true;
- return -1;
-}
-
-/* Destination:
- * Called during the initial RAM load section which lists the
- * RAMBlocks by name. This lets us know the order of the RAMBlocks on
- * the source. We've already built our local RAMBlock list, but not
- * yet sent the list to the source.
- */
-int rdma_block_notification_handle(QEMUFile *f, const char *name)
-{
- int curr;
- int found = -1;
-
- if (!migrate_rdma()) {
- return 0;
- }
-
- RCU_READ_LOCK_GUARD();
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
- RDMAContext *rdma = qatomic_rcu_read(&rioc->rdmain);
-
- if (!rdma) {
- return -1;
- }
-
- /* Find the matching RAMBlock in our local list */
- for (curr = 0; curr < rdma->local_ram_blocks.nb_blocks; curr++) {
- if (!strcmp(rdma->local_ram_blocks.block[curr].block_name, name)) {
- found = curr;
- break;
- }
- }
-
- if (found == -1) {
- error_report("RAMBlock '%s' not found on destination", name);
- return -1;
- }
-
- rdma->local_ram_blocks.block[curr].src_index = rdma->next_src_index;
- trace_rdma_block_notification_handle(name, rdma->next_src_index);
- rdma->next_src_index++;
-
- return 0;
-}
-
-int rdma_registration_start(QEMUFile *f, uint64_t flags)
-{
- if (!migrate_rdma() || migration_in_postcopy()) {
- return 0;
- }
-
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
- RCU_READ_LOCK_GUARD();
- RDMAContext *rdma = qatomic_rcu_read(&rioc->rdmaout);
- if (!rdma) {
- return -1;
- }
-
- if (rdma_errored(rdma)) {
- return -1;
- }
-
- trace_rdma_registration_start(flags);
- qemu_put_be64(f, RAM_SAVE_FLAG_HOOK);
- return qemu_fflush(f);
-}
-
-/*
- * Inform dest that dynamic registrations are done for now.
- * First, flush writes, if any.
- */
-int rdma_registration_stop(QEMUFile *f, uint64_t flags)
-{
- QIOChannelRDMA *rioc;
- Error *err = NULL;
- RDMAContext *rdma;
- RDMAControlHeader head = { .len = 0, .repeat = 1 };
- int ret;
-
- if (!migrate_rdma() || migration_in_postcopy()) {
- return 0;
- }
-
- RCU_READ_LOCK_GUARD();
- rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
- rdma = qatomic_rcu_read(&rioc->rdmaout);
- if (!rdma) {
- return -1;
- }
-
- if (rdma_errored(rdma)) {
- return -1;
- }
-
- qemu_fflush(f);
- ret = qemu_rdma_drain_cq(rdma);
-
- if (ret < 0) {
- goto err;
- }
-
- if (flags == RAM_CONTROL_SETUP) {
- RDMAControlHeader resp = {.type = RDMA_CONTROL_RAM_BLOCKS_RESULT };
- RDMALocalBlocks *local = &rdma->local_ram_blocks;
- int reg_result_idx, nb_dest_blocks;
-
- head.type = RDMA_CONTROL_RAM_BLOCKS_REQUEST;
- trace_rdma_registration_stop_ram();
-
- /*
- * Make sure that we parallelize the pinning on both sides.
- * For very large guests, doing this serially takes a really
- * long time, so we have to 'interleave' the pinning locally
- * with the control messages by performing the pinning on this
- * side before we receive the control response from the other
- * side that the pinning has completed.
- */
- ret = qemu_rdma_exchange_send(rdma, &head, NULL, &resp,
- ®_result_idx, rdma->pin_all ?
- qemu_rdma_reg_whole_ram_blocks : NULL,
- &err);
- if (ret < 0) {
- error_report_err(err);
- return -1;
- }
-
- nb_dest_blocks = resp.len / sizeof(RDMADestBlock);
-
- /*
- * The protocol uses two different sets of rkeys (mutually exclusive):
- * 1. One key to represent the virtual address of the entire ram block.
- * (dynamic chunk registration disabled - pin everything with one
rkey.)
- * 2. One to represent individual chunks within a ram block.
- * (dynamic chunk registration enabled - pin individual chunks.)
- *
- * Once the capability is successfully negotiated, the destination
transmits
- * the keys to use (or sends them later) including the virtual
addresses
- * and then propagates the remote ram block descriptions to his local
copy.
- */
-
- if (local->nb_blocks != nb_dest_blocks) {
- error_report("ram blocks mismatch (Number of blocks %d vs %d)",
- local->nb_blocks, nb_dest_blocks);
- error_printf("Your QEMU command line parameters are probably "
- "not identical on both the source and destination.");
- rdma->errored = true;
- return -1;
- }
-
- qemu_rdma_move_header(rdma, reg_result_idx, &resp);
- memcpy(rdma->dest_blocks,
- rdma->wr_data[reg_result_idx].control_curr, resp.len);
- for (int i = 0; i < nb_dest_blocks; i++) {
- network_to_dest_block(&rdma->dest_blocks[i]);
-
- /* We require that the blocks are in the same order */
- if (rdma->dest_blocks[i].length != local->block[i].length) {
- error_report("Block %s/%d has a different length %" PRIu64
- "vs %" PRIu64,
- local->block[i].block_name, i,
- local->block[i].length,
- rdma->dest_blocks[i].length);
- rdma->errored = true;
- return -1;
- }
- local->block[i].remote_host_addr =
- rdma->dest_blocks[i].remote_host_addr;
- local->block[i].remote_rkey = rdma->dest_blocks[i].remote_rkey;
- }
- }
-
- trace_rdma_registration_stop(flags);
-
- head.type = RDMA_CONTROL_REGISTER_FINISHED;
- ret = qemu_rdma_exchange_send(rdma, &head, NULL, NULL, NULL, NULL, &err);
-
- if (ret < 0) {
- error_report_err(err);
- goto err;
- }
-
- return 0;
-err:
- rdma->errored = true;
- return -1;
-}
-
-static void qio_channel_rdma_finalize(Object *obj)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(obj);
- if (rioc->rdmain) {
- qemu_rdma_cleanup(rioc->rdmain);
- g_free(rioc->rdmain);
- rioc->rdmain = NULL;
- }
- if (rioc->rdmaout) {
- qemu_rdma_cleanup(rioc->rdmaout);
- g_free(rioc->rdmaout);
- rioc->rdmaout = NULL;
- }
-}
-
-static void qio_channel_rdma_class_init(ObjectClass *klass,
- void *class_data G_GNUC_UNUSED)
-{
- QIOChannelClass *ioc_klass = QIO_CHANNEL_CLASS(klass);
-
- ioc_klass->io_writev = qio_channel_rdma_writev;
- ioc_klass->io_readv = qio_channel_rdma_readv;
- ioc_klass->io_set_blocking = qio_channel_rdma_set_blocking;
- ioc_klass->io_close = qio_channel_rdma_close;
- ioc_klass->io_create_watch = qio_channel_rdma_create_watch;
- ioc_klass->io_set_aio_fd_handler = qio_channel_rdma_set_aio_fd_handler;
- ioc_klass->io_shutdown = qio_channel_rdma_shutdown;
-}
-
-static const TypeInfo qio_channel_rdma_info = {
- .parent = TYPE_QIO_CHANNEL,
- .name = TYPE_QIO_CHANNEL_RDMA,
- .instance_size = sizeof(QIOChannelRDMA),
- .instance_finalize = qio_channel_rdma_finalize,
- .class_init = qio_channel_rdma_class_init,
-};
-
-static void qio_channel_rdma_register_types(void)
-{
- type_register_static(&qio_channel_rdma_info);
-}
-
-type_init(qio_channel_rdma_register_types);
-
-static QEMUFile *rdma_new_input(RDMAContext *rdma)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA));
-
- rioc->file = qemu_file_new_input(QIO_CHANNEL(rioc));
- rioc->rdmain = rdma;
- rioc->rdmaout = rdma->return_path;
-
- return rioc->file;
-}
-
-static QEMUFile *rdma_new_output(RDMAContext *rdma)
-{
- QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA));
-
- rioc->file = qemu_file_new_output(QIO_CHANNEL(rioc));
- rioc->rdmaout = rdma;
- rioc->rdmain = rdma->return_path;
-
- return rioc->file;
-}
-
-static void rdma_accept_incoming_migration(void *opaque)
-{
- RDMAContext *rdma = opaque;
- QEMUFile *f;
-
- trace_qemu_rdma_accept_incoming_migration();
- if (qemu_rdma_accept(rdma) < 0) {
- error_report("RDMA ERROR: Migration initialization failed");
- return;
- }
-
- trace_qemu_rdma_accept_incoming_migration_accepted();
-
- if (rdma->is_return_path) {
- return;
- }
-
- f = rdma_new_input(rdma);
- if (f == NULL) {
- error_report("RDMA ERROR: could not open RDMA for input");
- qemu_rdma_cleanup(rdma);
- return;
- }
-
- rdma->migration_started_on_destination = 1;
- migration_fd_process_incoming(f);
-}
-
-void rdma_start_incoming_migration(InetSocketAddress *host_port,
- Error **errp)
-{
- MigrationState *s = migrate_get_current();
- int ret;
- RDMAContext *rdma;
-
- trace_rdma_start_incoming_migration();
-
- /* Avoid ram_block_discard_disable(), cannot change during migration. */
- if (ram_block_discard_is_required()) {
- error_setg(errp, "RDMA: cannot disable RAM discard");
- return;
- }
-
- rdma = qemu_rdma_data_init(host_port, errp);
- if (rdma == NULL) {
- goto err;
- }
-
- ret = qemu_rdma_dest_init(rdma, errp);
- if (ret < 0) {
- goto err;
- }
-
- trace_rdma_start_incoming_migration_after_dest_init();
-
- ret = rdma_listen(rdma->listen_id, 5);
-
- if (ret < 0) {
- error_setg(errp, "RDMA ERROR: listening on socket!");
- goto cleanup_rdma;
- }
-
- trace_rdma_start_incoming_migration_after_rdma_listen();
- s->rdma_migration = true;
- qemu_set_fd_handler(rdma->channel->fd, rdma_accept_incoming_migration,
- NULL, (void *)(intptr_t)rdma);
- return;
-
-cleanup_rdma:
- qemu_rdma_cleanup(rdma);
-err:
- if (rdma) {
- g_free(rdma->host);
- }
- g_free(rdma);
-}
-
-void rdma_start_outgoing_migration(void *opaque,
- InetSocketAddress *host_port, Error **errp)
-{
- MigrationState *s = opaque;
- RDMAContext *rdma_return_path = NULL;
- RDMAContext *rdma;
- int ret;
-
- /* Avoid ram_block_discard_disable(), cannot change during migration. */
- if (ram_block_discard_is_required()) {
- error_setg(errp, "RDMA: cannot disable RAM discard");
- return;
- }
-
- rdma = qemu_rdma_data_init(host_port, errp);
- if (rdma == NULL) {
- goto err;
- }
-
- ret = qemu_rdma_source_init(rdma, migrate_rdma_pin_all(), errp);
-
- if (ret < 0) {
- goto err;
- }
-
- trace_rdma_start_outgoing_migration_after_rdma_source_init();
- ret = qemu_rdma_connect(rdma, false, errp);
-
- if (ret < 0) {
- goto err;
- }
-
- /* RDMA postcopy need a separate queue pair for return path */
- if (migrate_postcopy() || migrate_return_path()) {
- rdma_return_path = qemu_rdma_data_init(host_port, errp);
-
- if (rdma_return_path == NULL) {
- goto return_path_err;
- }
-
- ret = qemu_rdma_source_init(rdma_return_path,
- migrate_rdma_pin_all(), errp);
-
- if (ret < 0) {
- goto return_path_err;
- }
-
- ret = qemu_rdma_connect(rdma_return_path, true, errp);
-
- if (ret < 0) {
- goto return_path_err;
- }
-
- rdma->return_path = rdma_return_path;
- rdma_return_path->return_path = rdma;
- rdma_return_path->is_return_path = true;
- }
-
- trace_rdma_start_outgoing_migration_after_rdma_connect();
-
- s->to_dst_file = rdma_new_output(rdma);
- s->rdma_migration = true;
- migrate_fd_connect(s, NULL);
- return;
-return_path_err:
- qemu_rdma_cleanup(rdma);
-err:
- g_free(rdma);
- g_free(rdma_return_path);
-}
diff --git a/migration/savevm.c b/migration/savevm.c
index 388d7af7cd..939d35d69e 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -2970,7 +2970,7 @@ int qemu_loadvm_state(QEMUFile *f)
/* We've got to be careful; if we don't read the data and just shut the fd
* then the sender can error if we close while it's still sending.
- * We also mustn't read data that isn't there; some transports (RDMA)
+ * We also mustn't read data that isn't there; some transports
* will stall waiting for that data when the source has already closed.
*/
if (ret == 0 && should_send_vmdesc()) {
diff --git a/meson_options.txt b/meson_options.txt
index b5c0bad9e7..79b69d4286 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -196,8 +196,6 @@ option('rbd', type : 'feature', value : 'auto',
description: 'Ceph block device driver')
option('opengl', type : 'feature', value : 'auto',
description: 'OpenGL support')
-option('rdma', type : 'feature', value : 'auto',
- description: 'Enable RDMA-based migration')
option('gtk', type : 'feature', value : 'auto',
description: 'GTK+ user interface')
option('sdl', type : 'feature', value : 'auto',
diff --git a/migration/meson.build b/migration/meson.build
index 1eeb915ff6..e2cd92c01f 100644
--- a/migration/meson.build
+++ b/migration/meson.build
@@ -36,7 +36,6 @@ if get_option('replication').allowed()
system_ss.add(files('colo-failover.c', 'colo.c'))
endif
-system_ss.add(when: rdma, if_true: files('rdma.c'))
if get_option('live_block_migration').allowed()
system_ss.add(files('block.c'))
endif
diff --git a/migration/trace-events b/migration/trace-events
index f0e1cb80c7..7db3a5194f 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -193,7 +193,7 @@ process_incoming_migration_co_postcopy_end_main(void) ""
postcopy_preempt_enabled(bool value) "%d"
# migration-stats
-migration_transferred_bytes(uint64_t qemu_file, uint64_t multifd, uint64_t
rdma) "qemu_file %" PRIu64 " multifd %" PRIu64 " RDMA %" PRIu64
+migration_transferred_bytes(uint64_t qemu_file, uint64_t multifd) "qemu_file
%" PRIu64 " multifd %" PRIu64
# channel.c
migration_set_incoming_channel(void *ioc, const char *ioctype) "ioc=%p
ioctype=%s"
@@ -204,72 +204,6 @@ migrate_state_too_big(void) ""
migrate_global_state_post_load(const char *state) "loaded state: %s"
migrate_global_state_pre_save(const char *state) "saved state: %s"
-# rdma.c
-qemu_rdma_accept_incoming_migration(void) ""
-qemu_rdma_accept_incoming_migration_accepted(void) ""
-qemu_rdma_accept_pin_state(bool pin) "%d"
-qemu_rdma_accept_pin_verbsc(void *verbs) "Verbs context after listen: %p"
-qemu_rdma_block_for_wrid_miss(uint64_t wcomp, uint64_t req) "A Wanted wrid %"
PRIu64 " but got %" PRIu64
-qemu_rdma_cleanup_disconnect(void) ""
-qemu_rdma_close(void) ""
-qemu_rdma_connect_pin_all_requested(void) ""
-qemu_rdma_connect_pin_all_outcome(bool pin) "%d"
-qemu_rdma_dest_init_trying(const char *host, const char *ip) "%s => %s"
-qemu_rdma_dump_id_failed(const char *who) "%s RDMA Device opened, but can't
query port information"
-qemu_rdma_dump_id(const char *who, const char *name, const char *dev_name,
const char *dev_path, const char *ibdev_path, int transport, const char
*transport_name) "%s RDMA Device opened: kernel name %s uverbs device name %s,
infiniband_verbs class device path %s, infiniband class device path %s,
transport: (%d) %s"
-qemu_rdma_dump_gid(const char *who, const char *src, const char *dst) "%s
Source GID: %s, Dest GID: %s"
-qemu_rdma_exchange_get_response_start(const char *desc) "CONTROL: %s
receiving..."
-qemu_rdma_exchange_get_response_none(const char *desc, int type) "Surprise:
got %s (%d)"
-qemu_rdma_exchange_send_issue_callback(void) ""
-qemu_rdma_exchange_send_waiting(const char *desc) "Waiting for response %s"
-qemu_rdma_exchange_send_received(const char *desc) "Response %s received."
-qemu_rdma_fill(size_t control_len, size_t size) "RDMA %zd of %zd bytes already
in buffer"
-qemu_rdma_init_ram_blocks(int blocks) "Allocated %d local ram block structures"
-qemu_rdma_poll_recv(uint64_t comp, int64_t id, int sent) "completion %" PRIu64
" received (%" PRId64 ") left %d"
-qemu_rdma_poll_write(uint64_t comp, int left, uint64_t block, uint64_t chunk,
void *local, void *remote) "completions %" PRIu64 " left %d, block %" PRIu64 ",
chunk: %" PRIu64 " %p %p"
-qemu_rdma_poll_other(uint64_t comp, int left) "other completion %" PRIu64 "
received left %d"
-qemu_rdma_post_send_control(const char *desc) "CONTROL: sending %s.."
-qemu_rdma_register_and_get_keys(uint64_t len, void *start) "Registering %"
PRIu64 " bytes @ %p"
-qemu_rdma_register_odp_mr(const char *name) "Try to register On-Demand Paging
memory region: %s"
-qemu_rdma_advise_mr(const char *name, uint32_t len, uint64_t addr, const char
*res) "Try to advise block %s prefetch at %" PRIu32 "@0x%" PRIx64 ": %s"
-qemu_rdma_resolve_host_trying(const char *host, const char *ip) "Trying %s =>
%s"
-qemu_rdma_signal_unregister_append(uint64_t chunk, int pos) "Appending
unregister chunk %" PRIu64 " at position %d"
-qemu_rdma_signal_unregister_already(uint64_t chunk) "Unregister chunk %"
PRIu64 " already in queue"
-qemu_rdma_unregister_waiting_inflight(uint64_t chunk) "Cannot unregister
inflight chunk: %" PRIu64
-qemu_rdma_unregister_waiting_proc(uint64_t chunk, int pos) "Processing
unregister for chunk: %" PRIu64 " at position %d"
-qemu_rdma_unregister_waiting_send(uint64_t chunk) "Sending unregister for
chunk: %" PRIu64
-qemu_rdma_unregister_waiting_complete(uint64_t chunk) "Unregister for chunk:
%" PRIu64 " complete."
-qemu_rdma_write_flush(int sent) "sent total: %d"
-qemu_rdma_write_one_block(int count, int block, uint64_t chunk, uint64_t
current, uint64_t len, int nb_sent, int nb_chunks) "(%d) Not clobbering: block:
%d chunk %" PRIu64 " current %" PRIu64 " len %" PRIu64 " %d %d"
-qemu_rdma_write_one_post(uint64_t chunk, long addr, long remote, uint32_t len)
"Posting chunk: %" PRIu64 ", addr: 0x%lx remote: 0x%lx, bytes %" PRIu32
-qemu_rdma_write_one_queue_full(void) ""
-qemu_rdma_write_one_recvregres(int mykey, int theirkey, uint64_t chunk)
"Received registration result: my key: 0x%x their key 0x%x, chunk %" PRIu64
-qemu_rdma_write_one_sendreg(uint64_t chunk, int len, int index, int64_t
offset) "Sending registration request chunk %" PRIu64 " for %d bytes, index:
%d, offset: %" PRId64
-qemu_rdma_write_one_top(uint64_t chunks, uint64_t size) "Writing %" PRIu64 "
chunks, (%" PRIu64 " MB)"
-qemu_rdma_write_one_zero(uint64_t chunk, int len, int index, int64_t offset)
"Entire chunk is zero, sending compress: %" PRIu64 " for %d bytes, index: %d,
offset: %" PRId64
-rdma_add_block(const char *block_name, int block, uint64_t addr, uint64_t
offset, uint64_t len, uint64_t end, uint64_t bits, int chunks) "Added Block:
'%s':%d, addr: %" PRIu64 ", offset: %" PRIu64 " length: %" PRIu64 " end: %"
PRIu64 " bits %" PRIu64 " chunks %d"
-rdma_block_notification_handle(const char *name, int index) "%s at %d"
-rdma_delete_block(void *block, uint64_t addr, uint64_t offset, uint64_t len,
uint64_t end, uint64_t bits, int chunks) "Deleted Block: %p, addr: %" PRIu64 ",
offset: %" PRIu64 " length: %" PRIu64 " end: %" PRIu64 " bits %" PRIu64 "
chunks %d"
-rdma_registration_handle_compress(int64_t length, int index, int64_t offset)
"Zapping zero chunk: %" PRId64 " bytes, index %d, offset %" PRId64
-rdma_registration_handle_finished(void) ""
-rdma_registration_handle_ram_blocks(void) ""
-rdma_registration_handle_ram_blocks_loop(const char *name, uint64_t offset,
uint64_t length, void *local_host_addr, unsigned int src_index) "%s: @0x%"
PRIx64 "/%" PRIu64 " host:@%p src_index: %u"
-rdma_registration_handle_register(int requests) "%d requests"
-rdma_registration_handle_register_loop(int req, int index, uint64_t addr,
uint64_t chunks) "Registration request (%d): index %d, current_addr %" PRIu64 "
chunks: %" PRIu64
-rdma_registration_handle_register_rkey(int rkey) "0x%x"
-rdma_registration_handle_unregister(int requests) "%d requests"
-rdma_registration_handle_unregister_loop(int count, int index, uint64_t chunk)
"Unregistration request (%d): index %d, chunk %" PRIu64
-rdma_registration_handle_unregister_success(uint64_t chunk) "%" PRIu64
-rdma_registration_handle_wait(void) ""
-rdma_registration_start(uint64_t flags) "%" PRIu64
-rdma_registration_stop(uint64_t flags) "%" PRIu64
-rdma_registration_stop_ram(void) ""
-rdma_start_incoming_migration(void) ""
-rdma_start_incoming_migration_after_dest_init(void) ""
-rdma_start_incoming_migration_after_rdma_listen(void) ""
-rdma_start_outgoing_migration_after_rdma_connect(void) ""
-rdma_start_outgoing_migration_after_rdma_source_init(void) ""
-
# postcopy-ram.c
postcopy_discard_send_finish(const char *ramblock, int nwords, int ncmds) "%s
mask words sent=%d in %d commands"
postcopy_discard_send_range(const char *ramblock, unsigned long start,
unsigned long length) "%s:%lx/%lx"
diff --git a/qemu-options.hx b/qemu-options.hx
index f7ef9b4e41..4f390c33ef 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -4759,7 +4759,6 @@ ERST
DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \
"-incoming tcp:[host]:port[,to=maxport][,ipv4=on|off][,ipv6=on|off]\n" \
- "-incoming rdma:host:port[,ipv4=on|off][,ipv6=on|off]\n" \
"-incoming unix:socketpath\n" \
" prepare for incoming migration, listen on\n" \
" specified protocol and socket address\n" \
@@ -4773,8 +4772,6 @@ DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \
QEMU_ARCH_ALL)
SRST
``-incoming tcp:[host]:port[,to=maxport][,ipv4=on|off][,ipv6=on|off]``
- \
-``-incoming rdma:host:port[,ipv4=on|off][,ipv6=on|off]``
Prepare for incoming migration, listen on a given tcp port.
``-incoming unix:socketpath``
diff --git a/scripts/ci/org.centos/stream/8/build-environment.yml
b/scripts/ci/org.centos/stream/8/build-environment.yml
index 1ead77e2cb..a366bb185b 100644
--- a/scripts/ci/org.centos/stream/8/build-environment.yml
+++ b/scripts/ci/org.centos/stream/8/build-environment.yml
@@ -68,7 +68,6 @@
- pixman-devel
- python38
- python3-sphinx
- - rdma-core-devel
- redhat-rpm-config
- snappy-devel
- spice-glib-devel
diff --git a/scripts/ci/org.centos/stream/8/x86_64/configure
b/scripts/ci/org.centos/stream/8/x86_64/configure
index 868db665f6..5dead834fb 100755
--- a/scripts/ci/org.centos/stream/8/x86_64/configure
+++ b/scripts/ci/org.centos/stream/8/x86_64/configure
@@ -103,7 +103,6 @@
--disable-qed \
--disable-qom-cast-debug \
--disable-rbd \
---disable-rdma \
--disable-replication \
--disable-rng-none \
--disable-safe-stack \
@@ -175,7 +174,6 @@
--enable-opengl \
--enable-pie \
--enable-rbd \
---enable-rdma \
--enable-seccomp \
--enable-snappy \
--enable-smartcard \
diff --git a/scripts/ci/setup/build-environment.yml
b/scripts/ci/setup/build-environment.yml
index f344d1a850..0359b1c023 100644
--- a/scripts/ci/setup/build-environment.yml
+++ b/scripts/ci/setup/build-environment.yml
@@ -81,8 +81,6 @@
- libglusterfs-dev
- libgnutls28-dev
- libgtk-3-dev
- - libibumad-dev
- - libibverbs-dev
- libiscsi-dev
- libjemalloc-dev
- libjpeg-turbo8-dev
@@ -99,7 +97,6 @@
- libpng-dev
- libpulse-dev
- librbd-dev
- - librdmacm-dev
- libsasl2-dev
- libsdl2-dev
- libsdl2-image-dev
@@ -236,7 +233,6 @@
- pixman-devel
- python38
- python3-sphinx
- - rdma-core-devel
- redhat-rpm-config
- snappy-devel
- spice-glib-devel
diff --git a/scripts/coverity-scan/run-coverity-scan
b/scripts/coverity-scan/run-coverity-scan
index 43cf770f5e..3dd14c3cc4 100755
--- a/scripts/coverity-scan/run-coverity-scan
+++ b/scripts/coverity-scan/run-coverity-scan
@@ -426,7 +426,7 @@ echo "Configuring..."
--enable-libusb --enable-usb-redir \
--enable-libiscsi --enable-libnfs --enable-seccomp \
--enable-tpm --enable-libssh --enable-lzo --enable-snappy --enable-bzip2 \
- --enable-numa --enable-rdma --enable-smartcard --enable-virglrenderer \
+ --enable-numa --enable-smartcard --enable-virglrenderer \
--enable-mpath --enable-glusterfs \
--enable-virtfs --enable-zstd
diff --git a/scripts/meson-buildoptions.sh b/scripts/meson-buildoptions.sh
index 5ace33f167..52c34598ba 100644
--- a/scripts/meson-buildoptions.sh
+++ b/scripts/meson-buildoptions.sh
@@ -167,7 +167,6 @@ meson_options_help() {
printf "%s\n" ' qed qed image format support'
printf "%s\n" ' qga-vss build QGA VSS support (broken with MinGW)'
printf "%s\n" ' rbd Ceph block device driver'
- printf "%s\n" ' rdma Enable RDMA-based migration'
printf "%s\n" ' replication replication support'
printf "%s\n" ' rutabaga-gfx rutabaga_gfx support'
printf "%s\n" ' sdl SDL user interface'
@@ -442,8 +441,6 @@ _meson_option_parse() {
--disable-qom-cast-debug) printf "%s" -Dqom_cast_debug=false ;;
--enable-rbd) printf "%s" -Drbd=enabled ;;
--disable-rbd) printf "%s" -Drbd=disabled ;;
- --enable-rdma) printf "%s" -Drdma=enabled ;;
- --disable-rdma) printf "%s" -Drdma=disabled ;;
--enable-relocatable) printf "%s" -Drelocatable=true ;;
--disable-relocatable) printf "%s" -Drelocatable=false ;;
--enable-replication) printf "%s" -Dreplication=enabled ;;
diff --git a/tests/lcitool/projects/qemu.yml b/tests/lcitool/projects/qemu.yml
index 149b15de57..511e48a5ec 100644
--- a/tests/lcitool/projects/qemu.yml
+++ b/tests/lcitool/projects/qemu.yml
@@ -48,8 +48,6 @@ packages:
- libfdt
- libffi
- libgcrypt
- - libibumad
- - libibverbs
- libiscsi
- libjemalloc
- libjpeg
@@ -58,7 +56,6 @@ packages:
- libpmem
- libpng
- librbd
- - librdmacm
- libseccomp
- libselinux
- libslirp
diff --git a/tests/migration/guestperf/engine.py
b/tests/migration/guestperf/engine.py
index 608d7270f6..a704419082 100644
--- a/tests/migration/guestperf/engine.py
+++ b/tests/migration/guestperf/engine.py
@@ -41,7 +41,7 @@ def __init__(self, binary, dst_host, kernel, initrd,
transport="tcp",
self._dst_host = dst_host # Hostname of target host
self._kernel = kernel # Path to kernel image
self._initrd = initrd # Path to stress initrd
- self._transport = transport # 'unix' or 'tcp' or 'rdma'
+ self._transport = transport # 'unix' or 'tcp'
self._sleep = sleep
self._verbose = verbose
self._debug = debug
@@ -427,8 +427,6 @@ def run(self, hardware, scenario, result_dir=os.getcwd()):
if self._transport == "tcp":
uri = "tcp:%s:9000" % self._dst_host
- elif self._transport == "rdma":
- uri = "rdma:%s:9000" % self._dst_host
elif self._transport == "unix":
if self._dst_host != "localhost":
raise Exception("Running use unix migration transport for
non-local host")
--
2.41.0
[PATCH-for-9.1 v2 3/3] block/gluster: Remove RDMA protocol handling, Philippe Mathieu-Daudé, 2024/03/28
Re: [PATCH-for-9.1 v2 0/3] rdma: Remove RDMA subsystem and pvrdma device, Michael S. Tsirkin, 2024/03/29