Re: [QEMU PATCH v6 1/1] virtio-pci: implement No_Soft_Reset bit

[Chen, Jiqian]

Hi Michael S. Tsirkin,
Do you have any comments on this patch?

On 2024/2/22 11:40, Jiqian Chen wrote:
> In current code, when guest does S3, virtio devices are reset due to
> the bit No_Soft_Reset is not set. After resetting, the display resources
> of virtio-gpu are destroyed, then the display can't come back and only
> show blank after resuming.
> 
> Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check
> this bit, if this bit is set, the devices resetting will not be done, and
> then the display can work after resuming.
> 
> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
> ---
>  hw/virtio/virtio-pci.c         | 37 +++++++++++++++++++++++++++++++++-
>  include/hw/virtio/virtio-pci.h |  5 +++++
>  2 files changed, 41 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> index 1a7039fb0c68..da5312010345 100644
> --- a/hw/virtio/virtio-pci.c
> +++ b/hw/virtio/virtio-pci.c
> @@ -2197,6 +2197,11 @@ static void virtio_pci_realize(PCIDevice *pci_dev, 
> Error **errp)
>              pcie_cap_lnkctl_init(pci_dev);
>          }
>  
> +        if (proxy->flags & VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET) {
> +            pci_set_word(pci_dev->config + pos + PCI_PM_CTRL,
> +                         PCI_PM_CTRL_NO_SOFT_RESET);
> +        }
> +
>          if (proxy->flags & VIRTIO_PCI_FLAG_INIT_PM) {
>              /* Init Power Management Control Register */
>              pci_set_word(pci_dev->wmask + pos + PCI_PM_CTRL,
> @@ -2259,18 +2264,46 @@ static void virtio_pci_reset(DeviceState *qdev)
>      }
>  }
>  
> +static bool device_no_need_reset(PCIDevice *dev)
> +{
> +    if (pci_is_express(dev)) {
> +        uint16_t pmcsr;
> +
> +        pmcsr = pci_get_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL);
> +        /*
> +         * When No_Soft_Reset bit is set and device
> +         * is in D3hot state, can't reset device
> +         */
> +        if ((pmcsr & PCI_PM_CTRL_NO_SOFT_RESET) &&
> +            (pmcsr & PCI_PM_CTRL_STATE_MASK) == 3)
> +            return true;
> +    }
> +
> +    return false;
> +}
> +
>  static void virtio_pci_bus_reset_hold(Object *obj)
>  {
>      PCIDevice *dev = PCI_DEVICE(obj);
>      DeviceState *qdev = DEVICE(obj);
>  
> +    if (device_no_need_reset(dev))
> +        return;
> +
>      virtio_pci_reset(qdev);
>  
>      if (pci_is_express(dev)) {
> +        uint16_t pmcsr;
> +        uint16_t val = 0;
> +
>          pcie_cap_deverr_reset(dev);
>          pcie_cap_lnkctl_reset(dev);
>  
> -        pci_set_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL, 0);
> +        /* don't reset the RO bits */
> +        pmcsr = pci_get_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL);
> +        val = val | (pmcsr & PCI_PM_CTRL_NO_SOFT_RESET) |
> +                (pmcsr & PCI_PM_CTRL_DATA_SCALE_MASK);
> +        pci_set_word(dev->config + dev->exp.pm_cap + PCI_PM_CTRL, val);
>      }
>  }
>  
> @@ -2297,6 +2330,8 @@ static Property virtio_pci_properties[] = {
>                      VIRTIO_PCI_FLAG_INIT_LNKCTL_BIT, true),
>      DEFINE_PROP_BIT("x-pcie-pm-init", VirtIOPCIProxy, flags,
>                      VIRTIO_PCI_FLAG_INIT_PM_BIT, true),
> +    DEFINE_PROP_BIT("x-pcie-pm-no-soft-reset", VirtIOPCIProxy, flags,
> +                    VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT, true),
>      DEFINE_PROP_BIT("x-pcie-flr-init", VirtIOPCIProxy, flags,
>                      VIRTIO_PCI_FLAG_INIT_FLR_BIT, true),
>      DEFINE_PROP_BIT("aer", VirtIOPCIProxy, flags,
> diff --git a/include/hw/virtio/virtio-pci.h b/include/hw/virtio/virtio-pci.h
> index 59d88018c16a..9e67ba38c748 100644
> --- a/include/hw/virtio/virtio-pci.h
> +++ b/include/hw/virtio/virtio-pci.h
> @@ -43,6 +43,7 @@ enum {
>      VIRTIO_PCI_FLAG_INIT_FLR_BIT,
>      VIRTIO_PCI_FLAG_AER_BIT,
>      VIRTIO_PCI_FLAG_ATS_PAGE_ALIGNED_BIT,
> +    VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT,
>  };
>  
>  /* Need to activate work-arounds for buggy guests at vmstate load. */
> @@ -79,6 +80,10 @@ enum {
>  /* Init Power Management */
>  #define VIRTIO_PCI_FLAG_INIT_PM (1 << VIRTIO_PCI_FLAG_INIT_PM_BIT)
>  
> +/* Init The No_Soft_Reset bit of Power Management */
> +#define VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET \
> +  (1 << VIRTIO_PCI_FLAG_PM_NO_SOFT_RESET_BIT)
> +
>  /* Init Function Level Reset capability */
>  #define VIRTIO_PCI_FLAG_INIT_FLR (1 << VIRTIO_PCI_FLAG_INIT_FLR_BIT)
>  

-- 
Best regards,
Jiqian Chen.