[PATCH 2/7] hw/char: Implement STM32L4x5 USART skeleton

qemu-devel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 2/7] hw/char: Implement STM32L4x5 USART skeleton

From:	Arnaud Minier
Subject:	[PATCH 2/7] hw/char: Implement STM32L4x5 USART skeleton
Date:	Sun, 17 Mar 2024 11:39:13 +0100
Add the basic infrastructure (register read/write, type...)
to implement the STM32L4x5 USART.

Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
---
 MAINTAINERS                       |   1 +
 hw/char/Kconfig                   |   3 +
 hw/char/meson.build               |   1 +
 hw/char/stm32l4x5_usart.c         | 364 ++++++++++++++++++++++++++++++
 hw/char/trace-events              |  10 +
 include/hw/char/stm32l4x5_usart.h |  49 ++++
 6 files changed, 428 insertions(+)
 create mode 100644 hw/char/stm32l4x5_usart.c
 create mode 100644 include/hw/char/stm32l4x5_usart.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 409d7db4d4..deba4a54ce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1128,6 +1128,7 @@ M: Inès Varhol <ines.varhol@telecom-paris.fr>
 L: qemu-arm@nongnu.org
 S: Maintained
 F: hw/arm/stm32l4x5_soc.c
+F: hw/char/stm32l4x5_usart.c
 F: hw/misc/stm32l4x5_exti.c
 F: hw/misc/stm32l4x5_syscfg.c
 F: hw/misc/stm32l4x5_rcc.c
diff --git a/hw/char/Kconfig b/hw/char/Kconfig
index 6b6cf2fc1d..4fd74ea878 100644
--- a/hw/char/Kconfig
+++ b/hw/char/Kconfig
@@ -41,6 +41,9 @@ config VIRTIO_SERIAL
 config STM32F2XX_USART
     bool
 
+config STM32L4X5_USART
+    bool
+
 config CMSDK_APB_UART
     bool
 
diff --git a/hw/char/meson.build b/hw/char/meson.build
index 006d20f1e2..e5b13b6958 100644
--- a/hw/char/meson.build
+++ b/hw/char/meson.build
@@ -31,6 +31,7 @@ system_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: 
files('renesas_sci.c'))
 system_ss.add(when: 'CONFIG_SIFIVE_UART', if_true: files('sifive_uart.c'))
 system_ss.add(when: 'CONFIG_SH_SCI', if_true: files('sh_serial.c'))
 system_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: 
files('stm32f2xx_usart.c'))
+system_ss.add(when: 'CONFIG_STM32L4X5_USART', if_true: 
files('stm32l4x5_usart.c'))
 system_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: 
files('mchp_pfsoc_mmuart.c'))
 system_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c'))
 system_ss.add(when: 'CONFIG_GOLDFISH_TTY', if_true: files('goldfish_tty.c'))
diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c
new file mode 100644
index 0000000000..b56fee5b3a
--- /dev/null
+++ b/hw/char/stm32l4x5_usart.c
@@ -0,0 +1,364 @@
+/*
+ * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter)
+ *
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart
+ * by Alistair Francis.
+ * The reference used is the STMicroElectronics RM0351 Reference manual
+ * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "qapi/error.h"
+#include "chardev/char-fe.h"
+#include "chardev/char-serial.h"
+#include "migration/vmstate.h"
+#include "hw/char/stm32l4x5_usart.h"
+#include "hw/clock.h"
+#include "hw/irq.h"
+#include "hw/qdev-clock.h"
+#include "hw/qdev-properties.h"
+#include "hw/qdev-properties-system.h"
+#include "hw/registerfields.h"
+#include "trace.h"
+
+
+REG32(CR1, 0x00)
+    FIELD(CR1, M1, 28, 1)    /* Word length (part 2, see M0)*/
+    FIELD(CR1, EOBIE, 27, 1) /* End of Block interrupt enable */
+    FIELD(CR1, RTOIE, 26, 1) /* Receiver timeout interrupt enable */
+    FIELD(CR1, DEAT, 21, 5)  /* Driver Enable assertion time */
+    FIELD(CR1, DEDT, 16, 5)  /* Driver Enable de-assertion time */
+    FIELD(CR1, OVER8, 15, 1) /* Oversampling mode */
+    FIELD(CR1, CMIE, 14, 1)  /* Character match interrupt enable */
+    FIELD(CR1, MME, 13, 1)   /* Mute mode enable */
+    FIELD(CR1, M0, 12, 1)    /* Word length (part 1, see M1) */
+    FIELD(CR1, WAKE, 11, 1)  /* Receiver wakeup method */
+    FIELD(CR1, PCE, 10, 1)   /* Parity control enable */
+    FIELD(CR1, PS, 9, 1)     /* Parity selection */
+    FIELD(CR1, PEIE, 8, 1)   /* PE interrupt enable */
+    FIELD(CR1, TXEIE, 7, 1)  /* TXE interrupt enable */
+    FIELD(CR1, TCIE, 6, 1)   /* Transmission complete interrupt enable */
+    FIELD(CR1, RXNEIE, 5, 1) /* RXNE interrupt enable */
+    FIELD(CR1, IDLEIE, 4, 1) /* IDLE interrupt enable */
+    FIELD(CR1, TE, 3, 1)     /* Transmitter enable */
+    FIELD(CR1, RE, 2, 1)     /* Receiver enable */
+    FIELD(CR1, UESM, 1, 1)   /* USART enable in Stop mode */
+    FIELD(CR1, UE, 0, 1)     /* USART enable */
+REG32(CR2, 0x04)
+    FIELD(CR2, ADD_1, 28, 4)    /* ADD[7:4] */
+    FIELD(CR2, ADD_0, 24, 1)    /* ADD[3:0] */
+    FIELD(CR2, RTOEN, 23, 1)    /* Receiver timeout enable */
+    FIELD(CR2, ABRMOD, 21, 2)   /* Auto baud rate mode */
+    FIELD(CR2, ABREN, 20, 1)    /* Auto baud rate enable */
+    FIELD(CR2, MSBFIRST, 19, 1) /* Most significant bit first */
+    FIELD(CR2, DATAINV, 18, 1)  /* Binary data inversion */
+    FIELD(CR2, TXINV, 17, 1)    /* TX pin active level inversion */
+    FIELD(CR2, RXINV, 16, 1)    /* RX pin active level inversion */
+    FIELD(CR2, SWAP, 15, 1)     /* Swap RX/TX pins */
+    FIELD(CR2, LINEN, 14, 1)    /* LIN mode enable */
+    FIELD(CR2, STOP, 12, 2)     /* STOP bits */
+    FIELD(CR2, CLKEN, 11, 1)    /* Clock enable */
+    FIELD(CR2, CPOL, 10, 1)     /* Clock polarity */
+    FIELD(CR2, CPHA, 9, 1)      /* Clock phase */
+    FIELD(CR2, LBCL, 8, 1)      /* Last bit clock pulse */
+    FIELD(CR2, LBDIE, 6, 1)     /* LIN break detection interrupt enable */
+    FIELD(CR2, LBDL, 5, 1)      /* LIN break detection length */
+    FIELD(CR2, ADDM7, 4, 1)     /* 7-bit Address Detection /
+                                 * 4-bit Address Detection */
+REG32(CR3, 0x08)
+    /* TCBGTIE only on STM32L496xx/4A6xx devices */
+    FIELD(CR3, UCESM, 23, 1)   /* USART Clock Enable in Stop Mode */
+    FIELD(CR3, WUFIE, 22, 1)   /* Wakeup from Stop mode interrupt enable */
+    FIELD(CR3, WUS, 20, 2)     /* Wakeup from Stop mode interrupt flag 
selection */
+    FIELD(CR3, SCARCNT, 17, 3) /* Smartcard auto-retry count */
+    FIELD(CR3, DEP, 15, 1)     /* Driver enable polarity selection */
+    FIELD(CR3, DEM, 14, 1)     /* Driver enable mode */
+    FIELD(CR3, DDRE, 13, 1)    /* DMA Disable on Reception Error */
+    FIELD(CR3, OVRDIS, 12, 1)  /* Overrun Disable */
+    FIELD(CR3, ONEBIT, 11, 1)  /* One sample bit method enable */
+    FIELD(CR3, CTSIE, 10, 1)   /* CTS interrupt enable */
+    FIELD(CR3, CTSE, 9, 1)     /* CTS enable */
+    FIELD(CR3, RTSE, 8, 1)     /* RTS enable */
+    FIELD(CR3, DMAT, 7, 1)     /* DMA enable transmitter */
+    FIELD(CR3, DMAR, 6, 1)     /* DMA enable receiver */
+    FIELD(CR3, SCEN, 5, 1)     /* Smartcard mode enable */
+    FIELD(CR3, NACK, 4, 1)     /* Smartcard NACK enable */
+    FIELD(CR3, HDSEL, 3, 1)    /* Half-duplex selection */
+    FIELD(CR3, IRLP, 2, 1)     /* IrDA low-power */
+    FIELD(CR3, IREN, 1, 1)     /* IrDA mode enable */
+    FIELD(CR3, EIE, 0, 1)      /* Error interrupt enable */
+REG32(BRR, 0x0C)
+    FIELD(BRR, BRR, 0, 16)
+REG32(GTPR, 0x10)
+    FIELD(GTPR, GT, 8, 8)  /* Guard time value */
+    FIELD(GTPR, PSC, 0, 8) /* Prescaler value */
+REG32(RTOR, 0x14)
+    FIELD(RTOR, BLEN, 24, 8) /* Block Length */
+    FIELD(RTOR, RTO, 0, 24)  /* Receiver timeout value */
+REG32(RQR, 0x18)
+    FIELD(RQR, TXFRQ, 4, 1)  /* Transmit data flush request */
+    FIELD(RQR, RXFRQ, 3, 1)  /* Receive data flush request */
+    FIELD(RQR, MMRQ, 2, 1)   /* Mute mode request */
+    FIELD(RQR, SBKRQ, 1, 1)  /* Send break request */
+    FIELD(RQR, ABBRRQ, 0, 1) /* Auto baud rate request */
+REG32(ISR, 0x1C)
+    /* TCBGT only for STM32L475xx/476xx/486xx devices */
+    FIELD(ISR, REACK, 22, 1) /* Receive enable acknowledge flag */
+    FIELD(ISR, TEACK, 21, 1) /* Transmit enable acknowledge flag */
+    FIELD(ISR, WUF, 20, 1)   /* Wakeup from Stop mode flag */
+    FIELD(ISR, RWU, 19, 1)   /* Receiver wakeup from Mute mode */
+    FIELD(ISR, SBKF, 18, 1)  /* Send break flag */
+    FIELD(ISR, CMF, 17, 1)   /* Character match flag */
+    FIELD(ISR, BUSY, 16, 1)  /* Busy flag */
+    FIELD(ISR, ABRF, 15, 1)  /* Auto Baud rate flag */
+    FIELD(ISR, ABRE, 14, 1)  /* Auto Baud rate error */
+    FIELD(ISR, EOBF, 12, 1)  /* End of block flag */
+    FIELD(ISR, RTOF, 11, 1)  /* Receiver timeout */
+    FIELD(ISR, CTS, 10, 1)   /* CTS flag */
+    FIELD(ISR, CTSIF, 9, 1)  /* CTS interrupt flag */
+    FIELD(ISR, LBDF, 8, 1)   /* LIN break detection flag */
+    FIELD(ISR, TXE, 7, 1)    /* Transmit data register empty */
+    FIELD(ISR, TC, 6, 1)     /* Transmission complete */
+    FIELD(ISR, RXNE, 5, 1)   /* Read data register not empty */
+    FIELD(ISR, IDLE, 4, 1)   /* Idle line detected */
+    FIELD(ISR, ORE, 3, 1)    /* Overrun error */
+    FIELD(ISR, NF, 2, 1)     /* START bit Noise detection flag */
+    FIELD(ISR, FE, 1, 1)     /* Framing Error*/
+    FIELD(ISR, PE, 0, 1)     /* Parity Error*/
+REG32(ICR, 0x20)
+    FIELD(ICR, WUCF, 20, 1)   /* Wakeup from Stop mode clear flag */
+    FIELD(ICR, CMCF, 17, 1)   /* Character match clear flag */
+    FIELD(ICR, EOBCF, 12, 1)  /* End of block clear flag */
+    FIELD(ICR, RTOCF, 11, 1)  /* Receiver timeout clear flag */
+    FIELD(ICR, CTSCF, 9, 1)   /* CTS clear flag */
+    FIELD(ICR, LBDCF, 8, 1)   /* LIN break detection clear flag */
+    /* TCBGTCF only on STM32L496xx/4A6xx devices */
+    FIELD(ICR, TCCF, 6, 1)    /* Transmission complete clear flag */
+    FIELD(ICR, IDLECF, 4, 1)  /* Idle line detected clear flag */
+    FIELD(ICR, ORECF, 3, 1)   /* Overrun error clear flag */
+    FIELD(ICR, NCF, 2, 1)     /* Noise detected clear flag */
+    FIELD(ICR, FECF, 1, 1)    /* Framing error clear flag */
+    FIELD(ICR, PECF, 0, 1)    /* Parity error clear flag */
+REG32(RDR, 0x24)
+    FIELD(RDR, RDR, 0, 8)
+REG32(TDR, 0x28)
+    FIELD(TDR, TDR, 0, 8)
+
+static void stm32l4x5_usart_reset_hold(Object *obj)
+{
+    STM32L4X5UsartState *s = STM32L4X5_USART(obj);
+
+    s->cr1 = 0x00000000;
+    s->cr2 = 0x00000000;
+    s->cr3 = 0x00000000;
+    s->brr = 0x00000000;
+    s->gtpr = 0x00000000;
+    s->rtor = 0x00000000;
+    /* I/O being synchronous, TXE is always set. */
+    s->isr = 0x020000C0 | R_ISR_TXE_MASK;
+    s->rdr = 0x00000000;
+    s->tdr = 0x00000000;
+}
+
+static uint64_t stm32l4x5_usart_read(void *opaque, hwaddr addr,
+                                       unsigned int size)
+{
+    STM32L4X5UsartState *s = opaque;
+    uint64_t retvalue = 0;
+
+    switch (addr) {
+    case A_CR1:
+        retvalue = s->cr1;
+        break;
+    case A_CR2:
+        retvalue = s->cr2;
+        break;
+    case A_CR3:
+        retvalue = s->cr3;
+        break;
+    case A_BRR:
+        retvalue = FIELD_EX32(s->brr, BRR, BRR);
+        break;
+    case A_GTPR:
+        retvalue = s->gtpr;
+        break;
+    case A_RTOR:
+        retvalue = s->rtor;
+        break;
+    case A_RQR:
+        /* RQR is a write only register */
+        retvalue = 0x00000000;
+        break;
+    case A_ISR:
+        retvalue = s->isr;
+        break;
+    case A_ICR:
+        /* ICR is a clear register */
+        retvalue = 0x00000000;
+        break;
+    case A_RDR:
+        retvalue = FIELD_EX32(s->rdr, RDR, RDR);
+        /* Reset RXNE flag */
+        s->isr &= ~USART_ISR_RXNE;
+        break;
+    case A_TDR:
+        retvalue = FIELD_EX32(s->tdr, TDR, TDR);
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+        break;
+    }
+
+    trace_stm32l4x5_usart_read(addr, retvalue);
+
+    return retvalue;
+}
+
+static void stm32l4x5_usart_write(void *opaque, hwaddr addr,
+                                  uint64_t val64, unsigned int size)
+{
+    STM32L4X5UsartState *s = opaque;
+    const uint32_t value = val64;
+    uint8_t ch;
+
+    trace_stm32l4x5_usart_write(addr, value);
+
+    switch (addr) {
+    case A_CR1:
+        s->cr1 = value;
+        return;
+    case A_CR2:
+        s->cr2 = value;
+        return;
+    case A_CR3:
+        s->cr3 = value;
+        return;
+    case A_BRR:
+        s->brr = value;
+        return;
+    case A_GTPR:
+        s->gtpr = value;
+        return;
+    case A_RTOR:
+        s->rtor = value;
+        return;
+    case A_RQR:
+        return;
+    case A_ISR:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: ISR is read only !\n", __func__);
+        return;
+    case A_ICR:
+        /* Clear the status flags */
+        s->isr &= ~value;
+        return;
+    case A_RDR:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: RDR is read only !\n", __func__);
+        return;
+    case A_TDR:
+        s->tdr = value;
+        return;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr);
+    }
+}
+
+static const MemoryRegionOps stm32l4x5_usart_ops = {
+    .read = stm32l4x5_usart_read,
+    .write = stm32l4x5_usart_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid = {
+        .max_access_size = 4,
+        .min_access_size = 4,
+        .unaligned = false
+    },
+    .impl = {
+        .max_access_size = 4,
+        .min_access_size = 4,
+        .unaligned = false
+    },
+};
+
+static Property stm32l4x5_usart_properties[] = {
+    DEFINE_PROP_CHR("chardev", STM32L4X5UsartState, chr),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void stm32l4x5_usart_init(Object *obj)
+{
+    STM32L4X5UsartState *s = STM32L4X5_USART(obj);
+
+    sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
+
+    memory_region_init_io(&s->mmio, obj, &stm32l4x5_usart_ops, s,
+                          TYPE_STM32L4X5_USART, 0x400);
+    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+
+    s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0);
+}
+
+static const VMStateDescription vmstate_stm32l4x5_usart = {
+    .name = TYPE_STM32L4X5_USART,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(cr1, STM32L4X5UsartState),
+        VMSTATE_UINT32(cr2, STM32L4X5UsartState),
+        VMSTATE_UINT32(cr3, STM32L4X5UsartState),
+        VMSTATE_UINT32(brr, STM32L4X5UsartState),
+        VMSTATE_UINT32(gtpr, STM32L4X5UsartState),
+        VMSTATE_UINT32(rtor, STM32L4X5UsartState),
+        VMSTATE_UINT32(isr, STM32L4X5UsartState),
+        VMSTATE_UINT32(rdr, STM32L4X5UsartState),
+        VMSTATE_UINT32(tdr, STM32L4X5UsartState),
+        VMSTATE_CLOCK(clk, STM32L4X5UsartState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+
+static void stm32l4x5_usart_realize(DeviceState *dev, Error **errp)
+{
+    ERRP_GUARD();
+    STM32L4X5UsartState *s = STM32L4X5_USART(dev);
+    if (!clock_has_source(s->clk)) {
+        error_setg(errp, "USART clock must be wired up by SoC code");
+        return;
+    }
+}
+
+static void stm32l4x5_usart_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+    rc->phases.hold = stm32l4x5_usart_reset_hold;
+    device_class_set_props(dc, stm32l4x5_usart_properties);
+    dc->realize = stm32l4x5_usart_realize;
+    dc->vmsd = &vmstate_stm32l4x5_usart;
+}
+
+static const TypeInfo stm32l4x5_usart_types[] = {
+    {
+        .name          = TYPE_STM32L4X5_USART,
+        .parent        = TYPE_SYS_BUS_DEVICE,
+        .instance_size = sizeof(STM32L4X5UsartState),
+        .instance_init = stm32l4x5_usart_init,
+        .class_init    = stm32l4x5_usart_class_init,
+    }
+};
+
+DEFINE_TYPES(stm32l4x5_usart_types)
diff --git a/hw/char/trace-events b/hw/char/trace-events
index 7a398c82a5..9f5fda0eb8 100644
--- a/hw/char/trace-events
+++ b/hw/char/trace-events
@@ -106,6 +106,16 @@ cadence_uart_baudrate(unsigned baudrate) "baudrate %u"
 sh_serial_read(char *id, unsigned size, uint64_t offs, uint64_t val) " %s size 
%d offs 0x%02" PRIx64 " -> 0x%02" PRIx64
 sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size 
%d offs 0x%02" PRIx64 " <- 0x%02" PRIx64
 
+# stm32l4x5_usart.c
+stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 
"> -> 0x%" PRIx32 ""
+stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 
"> <- 0x%" PRIx32 ""
+stm32l4x5_usart_update_params(int speed, uint8_t parity, int data, int stop, 
uint64_t wordtime) "USART: speed: %d, parity: %c, data bits: %d, stop bits: %d 
wordtime: %"PRId64"ns"
+stm32l4x5_usart_rx(uint8_t c) "USART: got character 0x%x from backend"
+stm32l4x5_usart_tx(uint8_t c) "USART: character 0x%x sent to backend"
+stm32l4x5_usart_irq_raised(uint32_t reg) "USART: IRQ raised: 0x%08"PRIx32
+stm32l4x5_usart_irq_lowered(void) "USART: IRQ lowered"
+stm32l4x5_usart_error(const char* error) "USART Error: %s"
+
 # xen_console.c
 xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int 
port, unsigned int limit) "idx %u ring_ref %u port %u limit %u"
 xen_console_disconnect(unsigned int idx) "idx %u"
diff --git a/include/hw/char/stm32l4x5_usart.h 
b/include/hw/char/stm32l4x5_usart.h
new file mode 100644
index 0000000000..8ec1b7afed
--- /dev/null
+++ b/include/hw/char/stm32l4x5_usart.h
@@ -0,0 +1,49 @@
+/*
+ * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter)
+ *
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart
+ * by Alistair Francis.
+ * The reference used is the STMicroElectronics RM0351 Reference manual
+ * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs.
+ */
+
+#ifndef HW_STM32L4X5_USART_H
+#define HW_STM32L4X5_USART_H
+
+#include "hw/sysbus.h"
+#include "chardev/char-fe.h"
+#include "qom/object.h"
+
+#define TYPE_STM32L4X5_USART "stm32l4x5-usart"
+OBJECT_DECLARE_SIMPLE_TYPE(STM32L4X5UsartState, STM32L4X5_USART)
+
+struct STM32L4X5UsartState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion mmio;
+
+    uint32_t cr1;
+    uint32_t cr2;
+    uint32_t cr3;
+    uint32_t brr;
+    uint32_t gtpr;
+    uint32_t rtor;
+    /* rqr is write-only */
+    uint32_t isr;
+    /* icr is a clear register */
+    uint32_t rdr;
+    uint32_t tdr;
+
+    Clock *clk;
+    CharBackend chr;
+    qemu_irq irq;
+};
+#endif /* HW_STM32L4X5_USART_H */
-- 
2.34.1
[Prev in Thread]
Current Thread
[Next in Thread]
[PATCH 0/7] hw/char: Implement the STM32L4x5 USART, UART and LPUART, Arnaud Minier, 2024/03/17
- [PATCH 2/7] hw/char: Implement STM32L4x5 USART skeleton, Arnaud Minier <=
- [PATCH 1/7] hw/misc/stm32l4x5_rcc: Propagate period when enabling a clock, Arnaud Minier, 2024/03/17
- [PATCH 3/7] hw/char/stm32l4x5_usart: Add USART, UART, LPUART types, Arnaud Minier, 2024/03/17
  - Re: [PATCH 3/7] hw/char/stm32l4x5_usart: Add USART, UART, LPUART types, Peter Maydell, 2024/03/22
- [PATCH 5/7] hw/char/stm32l4x5_usart: Add options for serial parameters setting, Arnaud Minier, 2024/03/17
  - Re: [PATCH 5/7] hw/char/stm32l4x5_usart: Add options for serial parameters setting, Peter Maydell, 2024/03/22
- [PATCH 4/7] hw/char/stm32l4x5_usart: Enable serial read and write, Arnaud Minier, 2024/03/17
  - Re: [PATCH 4/7] hw/char/stm32l4x5_usart: Enable serial read and write, Peter Maydell, 2024/03/22
- [PATCH 6/7] hw/arm: Add the USART to the stm32l4x5 SoC, Arnaud Minier, 2024/03/17
  - Re: [PATCH 6/7] hw/arm: Add the USART to the stm32l4x5 SoC, Peter Maydell, 2024/03/22
- [PATCH 7/7] tests/qtest: Add tests for the STM32L4x5 USART, Arnaud Minier, 2024/03/17
Prev by Date: [PATCH 0/7] hw/char: Implement the STM32L4x5 USART, UART and LPUART
Next by Date: [PATCH 1/7] hw/misc/stm32l4x5_rcc: Propagate period when enabling a clock
Previous by thread: [PATCH 0/7] hw/char: Implement the STM32L4x5 USART, UART and LPUART
Next by thread: [PATCH 1/7] hw/misc/stm32l4x5_rcc: Propagate period when enabling a clock
Index(es):
- Date
- Thread