[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v5 02/13] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region r
From: |
nifan . cxl |
Subject: |
[PATCH v5 02/13] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative and mailbox command support |
Date: |
Mon, 4 Mar 2024 11:33:57 -0800 |
From: Fan Ni <fan.ni@samsung.com>
Per cxl spec r3.1, add dynamic capacity region representative based on
Table 8-165 and extend the cxl type3 device definition to include dc region
information. Also, based on info in 8.2.9.9.9.1, add 'Get Dynamic Capacity
Configuration' mailbox support.
Note: we store region decode length as byte-wise length on the device, which
should be divided by 256 * MiB before being returned to the host
for "Get Dynamic Capacity Configuration" mailbox command per
specification.
Signed-off-by: Fan Ni <fan.ni@samsung.com>
---
hw/cxl/cxl-mailbox-utils.c | 99 +++++++++++++++++++++++++++++++++++++
include/hw/cxl/cxl_device.h | 16 ++++++
2 files changed, 115 insertions(+)
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index ba1d9901df..5792010c12 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -22,6 +22,8 @@
#define CXL_CAPACITY_MULTIPLIER (256 * MiB)
#define CXL_DC_EVENT_LOG_SIZE 8
+#define CXL_NUM_EXTENTS_SUPPORTED 512
+#define CXL_NUM_TAGS_SUPPORTED 0
/*
* How to add a new command, example. The command set FOO, with cmd BAR.
@@ -80,6 +82,8 @@ enum {
#define GET_POISON_LIST 0x0
#define INJECT_POISON 0x1
#define CLEAR_POISON 0x2
+ DCD_CONFIG = 0x48,
+ #define GET_DC_CONFIG 0x0
PHYSICAL_SWITCH = 0x51,
#define IDENTIFY_SWITCH_DEVICE 0x0
#define GET_PHYSICAL_PORT_STATE 0x1
@@ -1238,6 +1242,91 @@ static CXLRetCode cmd_media_clear_poison(const struct
cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+/*
+ * CXL r3.1 section 8.2.9.9.9.1: Get Dynamic Capacity Configuration
+ * (Opcode: 4800h)
+ */
+static CXLRetCode cmd_dcd_get_dyn_cap_config(const struct cxl_cmd *cmd,
+ uint8_t *payload_in,
+ size_t len_in,
+ uint8_t *payload_out,
+ size_t *len_out,
+ CXLCCI *cci)
+{
+ CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
+ struct {
+ uint8_t region_cnt;
+ uint8_t start_region_id;
+ } QEMU_PACKED *in;
+ struct {
+ uint8_t num_regions;
+ uint8_t regions_returned;
+ uint8_t rsvd1[6];
+ struct {
+ uint64_t base;
+ uint64_t decode_len;
+ uint64_t region_len;
+ uint64_t block_size;
+ uint32_t dsmadhandle;
+ uint8_t flags;
+ uint8_t rsvd2[3];
+ } QEMU_PACKED records[];
+ } QEMU_PACKED *out;
+ struct {
+ uint32_t num_extents_supported;
+ uint32_t num_extents_available;
+ uint32_t num_tags_supported;
+ uint32_t num_tags_available;
+ } QEMU_PACKED *extra_out;
+ uint16_t record_count;
+ uint16_t i;
+ uint16_t out_pl_len;
+ uint8_t start_region_id;
+
+ in = (void *)payload_in;
+ out = (void *)payload_out;
+ start_region_id = in->start_region_id;
+ if (start_region_id >= ct3d->dc.num_regions) {
+ return CXL_MBOX_INVALID_INPUT;
+ }
+
+ record_count = MIN(ct3d->dc.num_regions - in->start_region_id,
+ in->region_cnt);
+
+ out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]);
+ extra_out = (void *)(payload_out + out_pl_len);
+ out_pl_len += sizeof(*extra_out);
+ assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE);
+
+ out->num_regions = ct3d->dc.num_regions;
+ out->regions_returned = record_count;
+ for (i = 0; i < record_count; i++) {
+ stq_le_p(&out->records[i].base,
+ ct3d->dc.regions[start_region_id + i].base);
+ stq_le_p(&out->records[i].decode_len,
+ ct3d->dc.regions[start_region_id + i].decode_len /
+ CXL_CAPACITY_MULTIPLIER);
+ stq_le_p(&out->records[i].region_len,
+ ct3d->dc.regions[start_region_id + i].len);
+ stq_le_p(&out->records[i].block_size,
+ ct3d->dc.regions[start_region_id + i].block_size);
+ stl_le_p(&out->records[i].dsmadhandle,
+ ct3d->dc.regions[start_region_id + i].dsmadhandle);
+ out->records[i].flags = ct3d->dc.regions[start_region_id + i].flags;
+ }
+ /*
+ * TODO: will assign proper values when extents and tags are introduced
+ * to use.
+ */
+ stl_le_p(&extra_out->num_extents_supported, CXL_NUM_EXTENTS_SUPPORTED);
+ stl_le_p(&extra_out->num_extents_available, CXL_NUM_EXTENTS_SUPPORTED);
+ stl_le_p(&extra_out->num_tags_supported, CXL_NUM_TAGS_SUPPORTED);
+ stl_le_p(&extra_out->num_tags_available, CXL_NUM_TAGS_SUPPORTED);
+
+ *len_out = out_pl_len;
+ return CXL_MBOX_SUCCESS;
+}
+
#define IMMEDIATE_CONFIG_CHANGE (1 << 1)
#define IMMEDIATE_DATA_CHANGE (1 << 2)
#define IMMEDIATE_POLICY_CHANGE (1 << 3)
@@ -1282,6 +1371,11 @@ static const struct cxl_cmd cxl_cmd_set[256][256] = {
cmd_media_clear_poison, 72, 0 },
};
+static const struct cxl_cmd cxl_cmd_set_dcd[256][256] = {
+ [DCD_CONFIG][GET_DC_CONFIG] = { "DCD_GET_DC_CONFIG",
+ cmd_dcd_get_dyn_cap_config, 2, 0 },
+};
+
static const struct cxl_cmd cxl_cmd_set_sw[256][256] = {
[INFOSTAT][IS_IDENTIFY] = { "IDENTIFY", cmd_infostat_identify, 0, 0 },
[INFOSTAT][BACKGROUND_OPERATION_STATUS] = { "BACKGROUND_OPERATION_STATUS",
@@ -1487,7 +1581,12 @@ void cxl_initialize_mailbox_swcci(CXLCCI *cci,
DeviceState *intf,
void cxl_initialize_mailbox_t3(CXLCCI *cci, DeviceState *d, size_t payload_max)
{
+ CXLType3Dev *ct3d = CXL_TYPE3(d);
+
cxl_copy_cci_commands(cci, cxl_cmd_set);
+ if (ct3d->dc.num_regions) {
+ cxl_copy_cci_commands(cci, cxl_cmd_set_dcd);
+ }
cci->d = d;
/* No separation for PCI MB as protocol handled in PCI device */
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 3cf3077afa..93ce047b28 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -422,6 +422,17 @@ typedef struct CXLPoison {
typedef QLIST_HEAD(, CXLPoison) CXLPoisonList;
#define CXL_POISON_LIST_LIMIT 256
+#define DCD_MAX_NUM_REGION 8
+
+typedef struct CXLDCRegion {
+ uint64_t base; /* aligned to 256*MiB */
+ uint64_t decode_len; /* aligned to 256*MiB */
+ uint64_t len;
+ uint64_t block_size;
+ uint32_t dsmadhandle;
+ uint8_t flags;
+} CXLDCRegion;
+
struct CXLType3Dev {
/* Private */
PCIDevice parent_obj;
@@ -454,6 +465,11 @@ struct CXLType3Dev {
unsigned int poison_list_cnt;
bool poison_list_overflowed;
uint64_t poison_list_overflow_ts;
+
+ struct dynamic_capacity {
+ uint8_t num_regions; /* 0-8 regions */
+ CXLDCRegion regions[DCD_MAX_NUM_REGION];
+ } dc;
};
#define TYPE_CXL_TYPE3 "cxl-type3"
--
2.43.0
- [PATCH v5 00/13] Enabling DCD emulation support in Qemu, nifan . cxl, 2024/03/04
- [PATCH v5 01/13] hw/cxl/cxl-mailbox-utils: Add dc_event_log_size field to output payload of identify memory device command, nifan . cxl, 2024/03/04
- [PATCH v5 02/13] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative and mailbox command support,
nifan . cxl <=
- [PATCH v5 03/13] include/hw/cxl/cxl_device: Rename mem_size as static_mem_size for type3 memory devices, nifan . cxl, 2024/03/04
- [PATCH v5 04/13] hw/mem/cxl_type3: Add support to create DC regions to type3 memory devices, nifan . cxl, 2024/03/04
- [PATCH v5 05/13] hw/mem/cxl-type3: Refactor ct3_build_cdat_entries_for_mr to take mr size insead of mr as argument, nifan . cxl, 2024/03/04
- [PATCH v5 07/13] hw/mem/cxl_type3: Add DC extent list representative and get DC extent list mailbox support, nifan . cxl, 2024/03/04