qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v4 02/10] hw/cxl/cxl-mailbox-utils: Add dynamic capacity regi


From: Jørgen Hansen
Subject: Re: [PATCH v4 02/10] hw/cxl/cxl-mailbox-utils: Add dynamic capacity region representative and mailbox command support
Date: Mon, 4 Mar 2024 12:40:18 +0000

On 2/21/24 19:15, nifan.cxl@gmail.com wrote:
> CAUTION: This email originated from outside of Western Digital. Do not click 
> on links or open attachments unless you recognize the sender and know that 
> the content is safe.
> 
> 
> From: Fan Ni <fan.ni@samsung.com>
> 
> Per cxl spec r3.1, add dynamic capacity region representative based on
> Table 8-165 and extend the cxl type3 device definition to include dc region
> information. Also, based on info in 8.2.9.9.9.1, add 'Get Dynamic Capacity
> Configuration' mailbox support.
> 
> Note: decode_len of a dc region is aligned to 256*MiB, divided by
> 256 * MiB before returned to the host for "Get Dynamic Capacity Configuration"
> mailbox command.
> 
> Signed-off-by: Fan Ni <fan.ni@samsung.com>
> ---
>   hw/cxl/cxl-mailbox-utils.c  | 110 ++++++++++++++++++++++++++++++++++++
>   include/hw/cxl/cxl_device.h |  16 ++++++
>   2 files changed, 126 insertions(+)
> 

[snip]

> 
>       /* No separation for PCI MB as protocol handled in PCI device */
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index 3cf3077afa..6df7fecdf1 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -422,6 +422,17 @@ typedef struct CXLPoison {
>   typedef QLIST_HEAD(, CXLPoison) CXLPoisonList;
>   #define CXL_POISON_LIST_LIMIT 256
> 
> +#define DCD_MAX_REGION_NUM 8
> +
> +typedef struct CXLDCDRegion {
> +    uint64_t base;
> +    uint64_t decode_len; /* aligned to 256*MiB */
> +    uint64_t len;
> +    uint64_t block_size;
> +    uint32_t dsmadhandle;
> +    uint8_t flags;
> +} CXLDCDRegion;
> +

To be consistent with the naming of extents, and functions defined later 
on, shouldn't this be CXLDCRegion (DC instead of DCD)?

>   struct CXLType3Dev {
>       /* Private */
>       PCIDevice parent_obj;
> @@ -454,6 +465,11 @@ struct CXLType3Dev {
>       unsigned int poison_list_cnt;
>       bool poison_list_overflowed;
>       uint64_t poison_list_overflow_ts;
> +
> +    struct dynamic_capacity {
> +        uint8_t num_regions; /* 0-8 regions */
> +        CXLDCDRegion regions[DCD_MAX_REGION_NUM];
> +    } dc;
>   };
> 
>   #define TYPE_CXL_TYPE3 "cxl-type3"
> --
> 2.43.0
> 
> 

Thanks,
Jorgen

reply via email to

[Prev in Thread] Current Thread [Next in Thread]