Re: [PATCH v4 0/4] Support RISC-V IOPMP

[Ethan Chen]

Ping again.

On Tue, Dec 05, 2023 at 03:48:07PM +0800, Ethan Chen wrote:
> Ping.
> https://patchew.org/QEMU/20231122053251.440723-1-ethan84@andestech.com/
> 
> On Wed, Nov 22, 2023 at 01:32:47PM +0800, Ethan Chen wrote:
> > This series implements IOPMP specification v1.0.0-draft4 rapid-k model.
> > The specification url:
> > https://github.com/riscv-non-isa/iopmp-spec/blob/main/riscv_iopmp_specification.pdf
> > 
> > When IOPMP is enabled, a DMA device ATCDMAC300 is added to RISC-V virt
> > platform. This DMA device is connected to the IOPMP and has the 
> > functionalities
> > required by IOPMP, including:
> > - Support setup the connection to IOPMP
> > - Support asynchronous I/O to handle stall transactions
> > - Send transaction information
> > 
> > IOPMP takes a transaction which partially match an entry as a partially hit
> > error. The transaction size is depending on source device, destination 
> > device
> > and bus.
> > 
> > Source device can send a transaction_info to IOPMP. IOPMP will check 
> > partially
> > hit by transaction_info. If source device does not send a transaction_info,
> > IOPMP checks information in IOMMU and dose not check partially hit.
> > 
> > Changes for v4:
> > 
> >   - Add descriptions of IOPMP and ATCDMAC300
> >   - Refine coding style and comments
> >   - config XILINX_AXI does not include file stream.c but selects config 
> > STREAM
> >     instead.
> >   - ATCDMAC300: INT_STATUS is write 1 clear per bit
> >                         Rename iopmp_address_sink to transcation_info_sink
> >   - IOPMP: Refine error message and remove unused variable
> >   - VIRT: Document new options
> >             atcdmac300 is only added when iopmp is enabled
> >           serial setting should not be changed
> > 
> > Ethan Chen (4):
> >   hw/core: Add config stream
> >   Add RISC-V IOPMP support
> >   hw/dma: Add Andes ATCDMAC300 support
> >   hw/riscv/virt: Add IOPMP support
> > 
> >  docs/system/riscv/virt.rst                    |  11 +
> >  hw/Kconfig                                    |   1 +
> >  hw/core/Kconfig                               |   3 +
> >  hw/core/meson.build                           |   2 +-
> >  hw/dma/Kconfig                                |   4 +
> >  hw/dma/atcdmac300.c                           | 566 ++++++++++
> >  hw/dma/meson.build                            |   1 +
> >  hw/misc/Kconfig                               |   4 +
> >  hw/misc/meson.build                           |   1 +
> >  hw/misc/riscv_iopmp.c                         | 966 ++++++++++++++++++
> >  hw/riscv/Kconfig                              |   2 +
> >  hw/riscv/virt.c                               |  65 ++
> >  include/hw/dma/atcdmac300.h                   | 180 ++++
> >  include/hw/misc/riscv_iopmp.h                 | 341 +++++++
> >  .../hw/misc/riscv_iopmp_transaction_info.h    |  28 +
> >  include/hw/riscv/virt.h                       |  10 +-
> >  16 files changed, 2183 insertions(+), 2 deletions(-)
> >  create mode 100644 hw/dma/atcdmac300.c
> >  create mode 100644 hw/misc/riscv_iopmp.c
> >  create mode 100644 include/hw/dma/atcdmac300.h
> >  create mode 100644 include/hw/misc/riscv_iopmp.h
> >  create mode 100644 include/hw/misc/riscv_iopmp_transaction_info.h
> > 
> > -- 
> > 2.34.1
> >