[PATCH v4 41/45] Add mailbox property tests. Part 2

[Sergey Kambalin]

Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
 tests/qtest/bcm2838-mbox-property-test.c | 196 ++++++++++++++++++++++-
 1 file changed, 195 insertions(+), 1 deletion(-)

diff --git a/tests/qtest/bcm2838-mbox-property-test.c 
b/tests/qtest/bcm2838-mbox-property-test.c
index 80746dbb95..5322c563a0 100644
--- a/tests/qtest/bcm2838-mbox-property-test.c
+++ b/tests/qtest/bcm2838-mbox-property-test.c
@@ -49,7 +49,8 @@ FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
                       (TEST_TAG_TYPE(testname) * tag);                         
\
     static void CHECK_FN_NAME(testname, __VA_ARGS__)                           
\
                              (TEST_TAG_TYPE(testname) *tag);                   
\
-    static void TEST_FN_NAME(testname, __VA_ARGS__)(void) {                    
\
+    static void TEST_FN_NAME(testname, __VA_ARGS__)(void)                      
\
+    {                                                                          
\
         struct {                                                               
\
             MboxBufHeader header;                                              
\
             TEST_TAG_TYPE(testname) tag;                                       
\
@@ -188,6 +189,179 @@ DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, EMMC) {
 }
 
 
/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, UART) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, UART) {
+    tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, UART) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, UART) {
+    tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, UART) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UART);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_UART);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, UART) {
+    tag->request.value.clock_id = CLOCK_ID_UART;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, CORE) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, CORE) {
+    tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, CORE) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, CORE) {
+    tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, CORE) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_CORE);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, CORE) {
+    tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, ANY) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, ANY) {
+    tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, ANY) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, ANY) {
+    tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, ANY) {
+    g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_UNDEFINED);
+    g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_ANY);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, ANY) {
+    tag->request.value.clock_id = CLOCK_ID_UNDEFINED;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_TEMPERATURE) {
+    g_assert_cmphex(tag->response.value.temperature_id, ==, 
TEMPERATURE_ID_SOC);
+    g_assert_cmpint(tag->response.value.temperature, ==, TEMPERATURE_SOC);
+}
+DECLARE_TEST_CASE_SETUP(GET_TEMPERATURE) {
+    tag->request.value.temperature_id = TEMPERATURE_ID_SOC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_TEMPERATURE) {
+    g_assert_cmphex(tag->response.value.temperature_id, ==, 
TEMPERATURE_ID_SOC);
+    g_assert_cmpint(tag->response.value.temperature, ==, TEMPERATURE_SOC_MAX);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_TEMPERATURE) {
+    tag->request.value.temperature_id = TEMPERATURE_ID_SOC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(ALLOCATE_BUFFER) {
+    g_assert_cmphex(tag->response.value.base, ==, VC_FB_BASE);
+    g_assert_cmphex(tag->response.value.size, ==, VC_FB_SIZE);
+}
+DECLARE_TEST_CASE_SETUP(ALLOCATE_BUFFER) {
+    tag->request.value.alignment = ALIGN_4K;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(RELEASE_FRAMEBUFFER) { 
+    /* No special checks are needed for this test */
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(BLANK_FRAMEBUFFER) {
+    g_assert_cmphex(tag->response.value.on, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(BLANK_FRAMEBUFFER) {
+    tag->request.value.on = 0;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_FB_PHYS_WIDTH) {
+    g_assert_cmpint(tag->response.value.width, ==, DUMMY_VALUE);
+    g_assert_cmpint(tag->response.value.height, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_FB_PHYS_WIDTH) {
+    tag->request.value.width = DUMMY_VALUE;
+    tag->request.value.height = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FB_PHYS_WIDTH, INITIAL) {
+    g_assert_cmpint(tag->response.value.width, ==, 640);
+    g_assert_cmpint(tag->response.value.height, ==, 480);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_PHYS_WIDTH) {
+    g_assert_cmpint(tag->response.value.width, ==, 800);
+    g_assert_cmpint(tag->response.value.height, ==, 600);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_PHYS_WIDTH) {
+    tag->request.value.width = 800;
+    tag->request.value.height = 600;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(TEST_FB_VIRT_WIDTH) {
+    g_assert_cmpint(tag->response.value.width, ==, DUMMY_VALUE);
+    g_assert_cmpint(tag->response.value.height, ==, DUMMY_VALUE);
+}
+DECLARE_TEST_CASE_SETUP(TEST_FB_VIRT_WIDTH) {
+    tag->request.value.width = DUMMY_VALUE;
+    tag->request.value.height = DUMMY_VALUE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FB_VIRT_WIDTH, INITIAL) {
+    g_assert_cmpint(tag->response.value.width, ==, 640);
+    g_assert_cmpint(tag->response.value.height, ==, 480);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_FB_VIRT_WIDTH) {
+    g_assert_cmpint(tag->response.value.width, ==, 800);
+    g_assert_cmpint(tag->response.value.height, ==, 600);
+}
+DECLARE_TEST_CASE_SETUP(SET_FB_VIRT_WIDTH) {
+    tag->request.value.width = 800;
+    tag->request.value.height = 600;
+}
+
+//==============================================================================
 int main(int argc, char **argv)
 {
     g_test_init(&argc, &argv, NULL);
@@ -201,6 +375,26 @@ int main(int argc, char **argv)
     QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, EMMC);
     QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, EMMC);
     QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, EMMC);
+    QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, UART);
+    QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, UART);
+    QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, UART);
+    QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, CORE);
+    QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, CORE);
+    QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, CORE);
+    QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, ANY);
+    QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, ANY);
+    QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, ANY);
+    QTEST_ADD_TEST_CASE(GET_TEMPERATURE);
+    QTEST_ADD_TEST_CASE(GET_MAX_TEMPERATURE);
+    QTEST_ADD_TEST_CASE(ALLOCATE_BUFFER);
+    QTEST_ADD_TEST_CASE(RELEASE_FRAMEBUFFER);
+    QTEST_ADD_TEST_CASE(BLANK_FRAMEBUFFER);
+    QTEST_ADD_TEST_CASE(TEST_FB_PHYS_WIDTH);
+    QTEST_ADD_TEST_CASE(GET_FB_PHYS_WIDTH, INITIAL);
+    QTEST_ADD_TEST_CASE(SET_FB_PHYS_WIDTH);
+    QTEST_ADD_TEST_CASE(TEST_FB_VIRT_WIDTH);
+    QTEST_ADD_TEST_CASE(GET_FB_VIRT_WIDTH, INITIAL);
+    QTEST_ADD_TEST_CASE(SET_FB_VIRT_WIDTH);
 
     return g_test_run();
 }
-- 
2.34.1