[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2] target/riscv: update checks on writing pmpcfg for Smepmp
From: |
Andrew Jones |
Subject: |
Re: [PATCH v2] target/riscv: update checks on writing pmpcfg for Smepmp version 1.0 |
Date: |
Thu, 14 Sep 2023 17:24:07 +0200 |
On Fri, Sep 08, 2023 at 04:38:34PM +0800, Alvin Chang wrote:
> Current checks on writing pmpcfg for Smepmp follows Smepmp version
> 0.9.1. However, Smepmp specification has already been ratified, and
> there are some differences between version 0.9.1 and 1.0. In this commit
> we update the checks of writing pmpcfg to follow Smepmp version 1.0.
>
> When mseccfg.MML is set, the constraints to modify PMP rules are:
> 1. Locked rules connot be removed or modified until a PMP reset, unless
> mseccfg.RLB is set.
> 2. From Smepmp specification version 1.0, chapter 2 section 4b:
> Adding a rule with executable privileges that either is M-mode-only
> or a locked Shared-Region is not possible and such pmpcfg writes are
> ignored, leaving pmpcfg unchanged.
>
> The commit transfers the value of pmpcfg into the index of the Smepmp
> truth table, and checks the rules by aforementioned specification
> changes.
>
> Signed-off-by: Alvin Chang <alvinga@andestech.com>
> ---
> Changes from v1: Convert ePMP over to Smepmp.
>
> target/riscv/pmp.c | 51 ++++++++++++++++++++++++++++++++++++++--------
> 1 file changed, 42 insertions(+), 9 deletions(-)
>
> diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c
> index 9d8db493e6..d1c3fc1e4f 100644
> --- a/target/riscv/pmp.c
> +++ b/target/riscv/pmp.c
> @@ -98,16 +98,49 @@ static bool pmp_write_cfg(CPURISCVState *env, uint32_t
> pmp_index, uint8_t val)
> locked = false;
> }
>
> - /* mseccfg.MML is set */
> - if (MSECCFG_MML_ISSET(env)) {
> - /* not adding execute bit */
> - if ((val & PMP_LOCK) != 0 && (val & PMP_EXEC) != PMP_EXEC) {
> - locked = false;
> - }
> - /* shared region and not adding X bit */
> - if ((val & PMP_LOCK) != PMP_LOCK &&
> - (val & 0x7) != (PMP_WRITE | PMP_EXEC)) {
> + /*
> + * mseccfg.MML is set. Locked rules cannot be removed or modified
> + * until a PMP reset. Besides, from Smepmp specification version
> 1.0
> + * , chapter 2 section 4b says:
> + * Adding a rule with executable privileges that either is
> + * M-mode-only or a locked Shared-Region is not possible and such
> + * pmpcfg writes are ignored, leaving pmpcfg unchanged.
> + */
> + if (MSECCFG_MML_ISSET(env) && !pmp_is_locked(env, pmp_index)) {
> + /*
> + * Convert the PMP permissions to match the truth table in
> the
> + * ePMP spec.
> + */
> + const uint8_t epmp_operation =
> + ((val & PMP_LOCK) >> 4) | ((val & PMP_READ) << 2) |
> + (val & PMP_WRITE) | ((val & PMP_EXEC) >> 2);
> +
> + switch (epmp_operation) {
> + /* pmpcfg.L = 0. Neither M-mode-only nor locked
> Shared-Region */
> + case 0:
> + case 1:
> + case 2:
> + case 3:
> + case 4:
> + case 5:
> + case 6:
> + case 7:
> + /* pmpcfg.L = 1 and pmpcfg.X = 0 (but case 10 is not
> allowed) */
> + case 8:
case 0 ... 8:
> + case 12:
> + case 14:
> + /* pmpcfg.LRWX = 1111 */
> + case 15: /* Read-only locked Shared-Region on all modes */
> locked = false;
> + break;
> + /* Other rules which add new code regions are not allowed */
> + case 9:
> + case 10: /* Execute-only locked Shared-Region on all modes
> */
> + case 11:
case 9 ... 11:
And why not put these cases in numerical order?
> + case 13:
> + break;
> + default:
> + g_assert_not_reached();
> }
> }
> } else {
> --
> 2.34.1
>
>
It looks like this patch has overlap with
20230907062440.1174224-1-mchitale@ventanamicro.com/">https://lore.kernel.org/all/20230907062440.1174224-1-mchitale@ventanamicro.com/
Maybe you and Mayuresh can work together on a final patch.
Thanks,
drew