[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[RFC PATCH 15/19] hw/mips: Set QDev properties using QDev API
From: |
Philippe Mathieu-Daudé |
Subject: |
[RFC PATCH 15/19] hw/mips: Set QDev properties using QDev API |
Date: |
Fri, 3 Feb 2023 19:09:10 +0100 |
No need to use the low-level QOM API when an object
inherits from QDev. Directly use the QDev API to set
its properties.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
hw/mips/boston.c | 6 ++----
hw/mips/cps.c | 42 ++++++++++++++----------------------------
hw/mips/jazz.c | 3 +--
hw/mips/malta.c | 6 ++----
4 files changed, 19 insertions(+), 38 deletions(-)
diff --git a/hw/mips/boston.c b/hw/mips/boston.c
index 21ad844519..f3c2179f66 100644
--- a/hw/mips/boston.c
+++ b/hw/mips/boston.c
@@ -700,10 +700,8 @@ static void boston_mach_init(MachineState *machine)
}
object_initialize_child(OBJECT(machine), "cps", &s->cps, TYPE_MIPS_CPS);
- object_property_set_str(OBJECT(&s->cps), "cpu-type", machine->cpu_type,
- &error_fatal);
- object_property_set_uint(OBJECT(&s->cps), "num-vp", machine->smp.cpus,
- &error_fatal);
+ qdev_prop_set_string(DEVICE(&s->cps), "cpu-type", machine->cpu_type);
+ qdev_prop_set_uint32(DEVICE(&s->cps), "num-vp", machine->smp.cpus);
qdev_connect_clock_in(DEVICE(&s->cps), "clk-in",
qdev_get_clock_out(dev, "cpu-refclk"));
sysbus_realize(SYS_BUS_DEVICE(&s->cps), &error_fatal);
diff --git a/hw/mips/cps.c b/hw/mips/cps.c
index 2b5269ebf1..3109644c5e 100644
--- a/hw/mips/cps.c
+++ b/hw/mips/cps.c
@@ -79,10 +79,8 @@ static void mips_cps_realize(DeviceState *dev, Error **errp)
CPUMIPSState *env = &cpu->env;
/* All VPs are halted on reset. Leave powering up to CPC. */
- if (!object_property_set_bool(OBJECT(cpu), "start-powered-off", true,
- errp)) {
- return;
- }
+ qdev_prop_set_bit(DEVICE(cpu), "start-powered-off", true);
+
/* All cores use the same clock tree */
qdev_connect_clock_in(DEVICE(cpu), "clk-in", s->clock);
@@ -106,12 +104,9 @@ static void mips_cps_realize(DeviceState *dev, Error
**errp)
/* Inter-Thread Communication Unit */
if (itu_present) {
object_initialize_child(OBJECT(dev), "itu", &s->itu, TYPE_MIPS_ITU);
- object_property_set_link(OBJECT(&s->itu), "cpu[0]",
- OBJECT(first_cpu), &error_abort);
- object_property_set_uint(OBJECT(&s->itu), "num-fifo", 16,
- &error_abort);
- object_property_set_uint(OBJECT(&s->itu), "num-semaphores", 16,
- &error_abort);
+ qdev_prop_set_link(DEVICE(&s->itu), "cpu[0]", OBJECT(first_cpu));
+ qdev_prop_set_uint32(DEVICE(&s->itu), "num-fifo", 16);
+ qdev_prop_set_uint32(DEVICE(&s->itu), "num-semaphores", 16);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->itu), errp)) {
return;
}
@@ -122,10 +117,8 @@ static void mips_cps_realize(DeviceState *dev, Error
**errp)
/* Cluster Power Controller */
object_initialize_child(OBJECT(dev), "cpc", &s->cpc, TYPE_MIPS_CPC);
- object_property_set_uint(OBJECT(&s->cpc), "num-vp", s->num_vp,
- &error_abort);
- object_property_set_int(OBJECT(&s->cpc), "vp-start-running", 1,
- &error_abort);
+ qdev_prop_set_uint32(DEVICE(&s->cpc), "num-vp", s->num_vp);
+ qdev_prop_set_uint64(DEVICE(&s->cpc), "vp-start-running", 0x1);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->cpc), errp)) {
return;
}
@@ -135,10 +128,8 @@ static void mips_cps_realize(DeviceState *dev, Error
**errp)
/* Global Interrupt Controller */
object_initialize_child(OBJECT(dev), "gic", &s->gic, TYPE_MIPS_GIC);
- object_property_set_uint(OBJECT(&s->gic), "num-vp", s->num_vp,
- &error_abort);
- object_property_set_uint(OBJECT(&s->gic), "num-irq", 128,
- &error_abort);
+ qdev_prop_set_uint32(DEVICE(&s->gic), "num-vp", s->num_vp);
+ qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", 128);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic), errp)) {
return;
}
@@ -150,16 +141,11 @@ static void mips_cps_realize(DeviceState *dev, Error
**errp)
gcr_base = MIPS_CPU(first_cpu)->env.CP0_CMGCRBase << 4;
object_initialize_child(OBJECT(dev), "gcr", &s->gcr, TYPE_MIPS_GCR);
- object_property_set_uint(OBJECT(&s->gcr), "num-vp", s->num_vp,
- &error_abort);
- object_property_set_int(OBJECT(&s->gcr), "gcr-rev", 0x800,
- &error_abort);
- object_property_set_int(OBJECT(&s->gcr), "gcr-base", gcr_base,
- &error_abort);
- object_property_set_link(OBJECT(&s->gcr), "gic", OBJECT(&s->gic.mr),
- &error_abort);
- object_property_set_link(OBJECT(&s->gcr), "cpc", OBJECT(&s->cpc.mr),
- &error_abort);
+ qdev_prop_set_uint32(DEVICE(&s->gcr), "num-vp", s->num_vp);
+ qdev_prop_set_int32(DEVICE(&s->gcr), "gcr-rev", 0x800);
+ qdev_prop_set_uint64(DEVICE(&s->gcr), "gcr-base", gcr_base);
+ qdev_prop_set_link(DEVICE(&s->gcr), "gic", OBJECT(&s->gic.mr));
+ qdev_prop_set_link(DEVICE(&s->gcr), "cpc", OBJECT(&s->cpc.mr));
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gcr), errp)) {
return;
}
diff --git a/hw/mips/jazz.c b/hw/mips/jazz.c
index 6aefe9a61b..d18aeb439b 100644
--- a/hw/mips/jazz.c
+++ b/hw/mips/jazz.c
@@ -302,8 +302,7 @@ static void mips_jazz_init(MachineState *machine,
qdev_set_nic_properties(dev, nd);
qdev_prop_set_uint8(dev, "it_shift", 2);
qdev_prop_set_bit(dev, "big_endian", big_endian > 0);
- object_property_set_link(OBJECT(dev), "dma_mr",
- OBJECT(rc4030_dma_mr), &error_abort);
+ qdev_prop_set_link(dev, "dma_mr", OBJECT(rc4030_dma_mr));
sysbus = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(sysbus, &error_fatal);
sysbus_mmio_map(sysbus, 0, 0x80001000);
diff --git a/hw/mips/malta.c b/hw/mips/malta.c
index af9021316d..3b88668bae 100644
--- a/hw/mips/malta.c
+++ b/hw/mips/malta.c
@@ -1064,10 +1064,8 @@ static void create_cps(MachineState *ms, MaltaState *s,
qemu_irq *cbus_irq, qemu_irq *i8259_irq)
{
object_initialize_child(OBJECT(s), "cps", &s->cps, TYPE_MIPS_CPS);
- object_property_set_str(OBJECT(&s->cps), "cpu-type", ms->cpu_type,
- &error_fatal);
- object_property_set_uint(OBJECT(&s->cps), "num-vp", ms->smp.cpus,
- &error_fatal);
+ qdev_prop_set_string(DEVICE(&s->cps), "cpu-type", ms->cpu_type);
+ qdev_prop_set_uint32(DEVICE(&s->cps), "num-vp", ms->smp.cpus);
qdev_connect_clock_in(DEVICE(&s->cps), "clk-in", s->cpuclk);
sysbus_realize(SYS_BUS_DEVICE(&s->cps), &error_fatal);
--
2.38.1
- [RFC PATCH 07/19] hw/scsi: Set QDev properties using QDev API, (continued)
- [RFC PATCH 07/19] hw/scsi: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [PATCH 08/19] hw/usb: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [PATCH 10/19] hw/avr: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [PATCH 09/19] hw/virtio: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [PATCH 11/19] hw/hppa: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [RFC PATCH 12/19] hw/i386: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [PATCH 13/19] hw/m68k: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [PATCH 14/19] hw/microblaze: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [RFC PATCH 15/19] hw/mips: Set QDev properties using QDev API,
Philippe Mathieu-Daudé <=
- [PATCH 16/19] hw/nios2: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [RFC PATCH 17/19] hw/riscv: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [PATCH 18/19] hw/rx: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- [PATCH 19/19] hw/sparc: Set QDev properties using QDev API, Philippe Mathieu-Daudé, 2023/02/03
- Re: [PATCH 00/19] hw: Set QDev properties using QDev API (part 1/3), Philippe Mathieu-Daudé, 2023/02/03