[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup
From: |
Jason Wang |
Subject: |
Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup |
Date: |
Fri, 9 Sep 2022 14:38:28 +0800 |
On Wed, Sep 7, 2022 at 12:36 AM Eugenio Pérez <eperezma@redhat.com> wrote:
>
> To have enabled vlans at device startup may happen in the destination of
> a live migration, so this configuration must be restored.
>
> At this moment the code is not accessible, since SVQ refuses to start if
> vlan feature is exposed by the device.
>
> Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
> ---
> net/vhost-vdpa.c | 46 ++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 44 insertions(+), 2 deletions(-)
>
> diff --git a/net/vhost-vdpa.c b/net/vhost-vdpa.c
> index 4bc3fd01a8..ecbfd08eb9 100644
> --- a/net/vhost-vdpa.c
> +++ b/net/vhost-vdpa.c
> @@ -100,6 +100,8 @@ static const uint64_t vdpa_svq_device_features =
> BIT_ULL(VIRTIO_NET_F_RSC_EXT) |
> BIT_ULL(VIRTIO_NET_F_STANDBY);
>
> +#define MAX_VLAN (1 << 12) /* Per 802.1Q definition */
> +
> VHostNetState *vhost_vdpa_get_vhost_net(NetClientState *nc)
> {
> VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
> @@ -423,6 +425,47 @@ static int vhost_vdpa_net_load_mq(VhostVDPAState *s,
> return *s->status != VIRTIO_NET_OK;
> }
>
> +static int vhost_vdpa_net_load_single_vlan(VhostVDPAState *s,
> + const VirtIONet *n,
> + uint16_t vid)
> +{
> + ssize_t dev_written = vhost_vdpa_net_load_cmd(s, VIRTIO_NET_CTRL_VLAN,
> + VIRTIO_NET_CTRL_VLAN_ADD,
> + &vid, sizeof(vid));
> + if (unlikely(dev_written < 0)) {
> + return dev_written;
> + }
> +
> + if (unlikely(*s->status != VIRTIO_NET_OK)) {
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int vhost_vdpa_net_load_vlan(VhostVDPAState *s,
> + const VirtIONet *n)
> +{
> + uint64_t features = n->parent_obj.guest_features;
> +
> + if (!(features & BIT_ULL(VIRTIO_NET_F_CTRL_VLAN))) {
> + return 0;
> + }
> +
> + for (int i = 0; i < MAX_VLAN >> 5; i++) {
> + for (int j = 0; n->vlans[i] && j <= 0x1f; j++) {
> + if (n->vlans[i] & (1U << j)) {
> + int r = vhost_vdpa_net_load_single_vlan(s, n, (i << 5) + j);
This seems to cause a lot of latency if the driver has a lot of vlans.
I wonder if it's simply to let all vlan traffic go by disabling
CTRL_VLAN feature at vDPA layer.
Thanks
> + if (unlikely(r != 0)) {
> + return r;
> + }
> + }
> + }
> + }
> +
> + return 0;
> +}
> +
> static int vhost_vdpa_net_load(NetClientState *nc)
> {
> VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
> @@ -445,8 +488,7 @@ static int vhost_vdpa_net_load(NetClientState *nc)
> if (unlikely(r)) {
> return r;
> }
> -
> - return 0;
> + return vhost_vdpa_net_load_vlan(s, n);
> }
>
> static NetClientInfo net_vhost_vdpa_cvq_info = {
> --
> 2.31.1
>
- [PATCH 0/3] Vhost-vdpa Shadow Virtqueue VLAN support, Eugenio Pérez, 2022/09/06
- [PATCH 1/3] virtio-net: do not reset vlan filtering at set_features, Eugenio Pérez, 2022/09/06
- [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Eugenio Pérez, 2022/09/06
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup,
Jason Wang <=
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Jason Wang, 2022/09/09
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Eugenio Perez Martin, 2022/09/09
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Michael S. Tsirkin, 2022/09/09
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Jason Wang, 2022/09/13
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Eugenio Perez Martin, 2022/09/14
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Jason Wang, 2022/09/13
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Eugenio Perez Martin, 2022/09/14
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Si-Wei Liu, 2022/09/14
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Eugenio Perez Martin, 2022/09/14
- Re: [PATCH 2/3] vdpa: load vlan configuration at NIC startup, Si-Wei Liu, 2022/09/14