[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v4 2/8] hw/intc: GICv3 ITS register definitions added
|
From: |
shashi . mallela |
|
Subject: |
Re: [PATCH v4 2/8] hw/intc: GICv3 ITS register definitions added |
|
Date: |
Wed, 16 Jun 2021 17:02:15 -0400 |
Hi Eric,
Please find my responses inline (below):-
On Sat, 2021-06-12 at 08:08 +0200, Eric Auger wrote:
>
> On 6/2/21 8:00 PM, Shashi Mallela wrote:
> > Defined descriptors for ITS device table,collection table and ITS
> > command queue entities.Implemented register read/write functions,
> > extract ITS table parameters and command queue parameters,extended
> > gicv3 common to capture qemu address space(which host the ITS table
> > platform memories required for subsequent ITS processing) and
> > initialize the same in ITS device.
> >
> > Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
> > ---
> > hw/intc/arm_gicv3_its.c | 335
> > +++++++++++++++++++++++++
> > hw/intc/gicv3_internal.h | 28 ++-
> > include/hw/intc/arm_gicv3_common.h | 3 +
> > include/hw/intc/arm_gicv3_its_common.h | 30 +++
> > 4 files changed, 395 insertions(+), 1 deletion(-)
> >
> > diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c
> > index 545cda3665..af60f19c98 100644
> > --- a/hw/intc/arm_gicv3_its.c
> > +++ b/hw/intc/arm_gicv3_its.c
> > @@ -28,6 +28,157 @@ struct GICv3ITSClass {
> > void (*parent_reset)(DeviceState *dev);
> > };
> >
> > +static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz)
> > +{
> > + uint64_t result = 0;
> > +
> > + switch (page_sz) {
> > + case GITS_ITT_PAGE_SIZE_0:
> > + case GITS_ITT_PAGE_SIZE_1:
> > + result = value & R_GITS_BASER_PHYADDR_MASK;
> Use FIELD_EX64 as well for homogeneity?
Done
> > + break;
> > +
> > + case GITS_ITT_PAGE_SIZE_2:
> > + result = value & R_GITS_BASER_PHYADDRL_64K_MASK;
> here as well?
Done
> > + result |= FIELD_EX64(value, GITS_BASER, PHYADDRH_64K) <<
> > 48;
> > + break;
> > +
> > + default:
> > + break;
> > + }
> > + return result;
> > +}
> > +
> > +static void extract_table_params(GICv3ITSState *s)
> > +{
> > + uint16_t num_pages = 0;
> > + uint8_t page_sz_type;
> > + uint8_t type;
> > + uint32_t page_sz = 0;
> > + uint64_t value;
> > +
> > + for (int i = 0; i < 8; i++) {
> > + value = s->baser[i];
> > +
> > + if (!value) {
> > + continue;
> > + }
> > +
> > + page_sz_type = FIELD_EX64(value, GITS_BASER, PAGESIZE);
> > +
> > + switch (page_sz_type) {
> > + case 0:
> > + page_sz = GITS_ITT_PAGE_SIZE_0;
> > + break;
> > +
> > + case 1:
> > + page_sz = GITS_ITT_PAGE_SIZE_1;
> > + break;
> > +
> > + case 2:
> > + case 3:
> > + page_sz = GITS_ITT_PAGE_SIZE_2;
> > + break;
> > +
> > + default:
> > + g_assert_not_reached();
> > + }
> > +
> > + num_pages = FIELD_EX64(value, GITS_BASER, SIZE);
> + 1 directly? and remove num_pages + 1 below.
Done
> > +
> > + type = FIELD_EX64(value, GITS_BASER, TYPE);
> > +
> > + switch (type) {
> > +
> > + case GITS_ITT_TYPE_DEVICE:
> > + memset(&s->dt, 0 , sizeof(s->dt));
> > + s->dt.valid = FIELD_EX64(value, GITS_BASER, VALID);
> > +
> > + if (!s->dt.valid) {
> > + return;
> > + }
> > +
> > + s->dt.page_sz = page_sz;
> > + s->dt.indirect = FIELD_EX64(value, GITS_BASER,
> > INDIRECT);
> > + s->dt.entry_sz = FIELD_EX64(value, GITS_BASER,
> > ENTRYSIZE);
> > +
> > + if (!s->dt.indirect) {
> > + s->dt.max_entries = ((num_pages + 1) * page_sz) /
> > + s->dt.entry_sz;
> > + } else {
> > + s->dt.max_entries = ((((num_pages + 1) * page_sz)
> > /
> > + L1TABLE_ENTRY_SIZE) *
> > + (page_sz / s->dt.entry_sz));
> > + }
> > +
> > + s->dt.max_devids = (1UL << (FIELD_EX64(s->typer,
> > GITS_TYPER,
> > + DEVBITS) + 1));
> > +
> > + s->dt.base_addr = baser_base_addr(value, page_sz);
> > +
> > + break;
> > +
> > + case GITS_ITT_TYPE_COLLECTION:
> > + memset(&s->ct, 0 , sizeof(s->ct));
> > + s->ct.valid = FIELD_EX64(value, GITS_BASER, VALID);
> > +
> > + /*
> > + * GITS_TYPER.HCC is 0 for this implementation
> > + * hence writes are discarded if ct.valid is 0
> > + */
> > + if (!s->ct.valid) {
> > + return;
> as this is an helper routine, I think it would be better to have this
> check in the caller. Also you reset ct above.
The idea here was to keep all the GITS_BASER fields parsing and
extraction in one place in this function without the caller (like
its_writel) having to know the GITS_BASER fields format and thereby
split the logic between the caller and this function
> > + }
> > +
> > + s->ct.page_sz = page_sz;
> > + s->ct.indirect = FIELD_EX64(value, GITS_BASER,
> > INDIRECT);
> > + s->ct.entry_sz = FIELD_EX64(value, GITS_BASER,
> > ENTRYSIZE);
> > +
> > + if (!s->ct.indirect) {
> > + s->ct.max_entries = ((num_pages + 1) * page_sz) /
> > + s->ct.entry_sz;
> > + } else {
> > + s->ct.max_entries = ((((num_pages + 1) * page_sz)
> > /
> > + L1TABLE_ENTRY_SIZE) *
> > + (page_sz / s->ct.entry_sz));
> > + }
> > +
> > + if (FIELD_EX64(s->typer, GITS_TYPER, CIL)) {
> > + s->ct.max_collids = (1UL << (FIELD_EX64(s->typer,
> > + GITS_TYPER, CIDBITS) + 1));
> > + } else {
> > + /* 16-bit CollectionId supported when CIL == 0 */
> > + s->ct.max_collids = (1UL << 16);
> > + }
> > +
> > + s->ct.base_addr = baser_base_addr(value, page_sz);
> > +
> > + break;
> > +
> > + default:
> > + break;
> > + }
> > + }
> > +}
> > +
> > +static void extract_cmdq_params(GICv3ITSState *s)
> > +{
> > + uint16_t num_pages = 0;
> > + uint64_t value = s->cbaser;
> > +
> > + num_pages = FIELD_EX64(value, GITS_CBASER, SIZE);
> + 1
> > +
> > + memset(&s->cq, 0 , sizeof(s->cq));
> > + s->cq.valid = FIELD_EX64(value, GITS_CBASER, VALID);
> > +
> > + if (s->cq.valid) {
> > + s->cq.max_entries = ((num_pages + 1) *
> > GITS_ITT_PAGE_SIZE_0) /
> nit: use of GITS_ITT_PAGE_SIZE_0 is misleading as ITT stands for
> interrupt translation table and does not relate to CMDQ. Use 4K
> define
> instead.
changed the names to GITS_PAGE_SIZE_4K/16K/64K
> > + GITS_CMDQ_ENTRY_SIZE;
> > + s->cq.base_addr = FIELD_EX64(value, GITS_CBASER, PHYADDR);
> > + s->cq.base_addr <<= R_GITS_CBASER_PHYADDR_SHIFT;
> > + }
> > +}
> > +
> > static MemTxResult gicv3_its_translation_write(void *opaque,
> > hwaddr offset,
> > uint64_t data,
> > unsigned size,
> > MemTxAttrs attrs)
> > @@ -41,7 +192,73 @@ static MemTxResult its_writel(GICv3ITSState *s,
> > hwaddr offset,
> > uint64_t value, MemTxAttrs attrs)
> > {
> > MemTxResult result = MEMTX_OK;
> > + int index;
> >
> > + switch (offset) {
> > + case GITS_CTLR:
> > + s->ctlr |= (value & ~(s->ctlr));
> > +
> > + if (s->ctlr & ITS_CTLR_ENABLED) {
> > + extract_table_params(s);
> > + extract_cmdq_params(s);
> > + s->creadr = 0;
> The KVM code also checks the he CBASER and
> device/collection BASER are valid
> we do check CBASER and device/collection BASER are valid in this
> implementation too (via extract_cmdq_params & extract_table_params)
> To be further checked in subsequent patches:
> - cache invalidation when turning off
> - process commands if turned on?
> - any cmd lock
>
> > + }
> > + break;
> > + case GITS_CBASER:
> > + /*
> > + * IMPDEF choice:- GITS_CBASER register becomes RO if ITS
> > is
> > + * already enabled
> > + */
> > + if (!(s->ctlr & ITS_CTLR_ENABLED)) {
> > + s->cbaser = deposit64(s->cbaser, 0, 32, value);
> > + s->creadr = 0;
> > + }
> > + break;
> > + case GITS_CBASER + 4:
> > + /*
> > + * IMPDEF choice:- GITS_CBASER register becomes RO if ITS
> > is
> > + * already enabled
> > + */
> > + if (!(s->ctlr & ITS_CTLR_ENABLED)) {
> > + s->cbaser = deposit64(s->cbaser, 32, 32, value);
> you need to reset creadr here also
Done
>
> also CWRITER should be reset to CREADR.
Done
> KVM code comment:
> /*
> * CWRITER is architecturally UNKNOWN on reset, but we need to reset
> * it to CREADR to make sure we start with an empty command buffer.
> */
>
> > + }> + break;
> > + case GITS_CWRITER:
> > + s->cwriter = deposit64(s->cwriter, 0, 32,
> > + (value &
> > ~R_GITS_CWRITER_RETRY_MASK));
> how do you implement the overflow case?
> "If GITS_CWRITER is written with a value outside of the valid range
> specified by
> GITS_CBASER.Physical_Address and GITS_CBASER.Size, behavior is a
> CONSTRAINED UNPREDICTABLE choice"
> for info the KVM code does not write the actual reg
we write the reg and log a guest error
> further check: process command?
>
> > + break;
> > + case GITS_CWRITER + 4:
> > + s->cwriter = deposit64(s->cwriter, 32, 32,
> > + (value &
> > ~R_GITS_CWRITER_RETRY_MASK));
> > + break;
> > + case GITS_BASER ... GITS_BASER + 0x3f:
> > + /*
> > + * IMPDEF choice:- GITS_BASERn register becomes RO if ITS
> > is
> > + * already enabled
> > + */
> > + if (!(s->ctlr & ITS_CTLR_ENABLED)) {
> > + index = (offset - GITS_BASER) / 8;
> > +
> > + if (offset & 7) {
> > + s->baser[index] = deposit64(s->baser[index], 32,
> > 32,
> > + (value &
> > ~GITS_BASER_VAL_MASK));
> > + } else {
> > + s->baser[index] = deposit64(s->baser[index], 0,
> > 32,
> > + (value &
> > ~GITS_BASER_VAL_MASK));
> > + }
> > + }
> > + break;
> > + case GITS_IIDR:
> > + case GITS_IDREGS ... GITS_IDREGS + 0x2f:
> > + /* RO registers, ignore the write */
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: invalid guest write to RO register at
> > offset "
> > + TARGET_FMT_plx "\n", __func__, offset);
> > + break;
> > + default:
> > + result = MEMTX_ERROR;
> > + break;
> > + }
> > return result;
> > }
> >
> > @@ -49,7 +266,55 @@ static MemTxResult its_readl(GICv3ITSState *s,
> > hwaddr offset,
> > uint64_t *data, MemTxAttrs attrs)
> > {
> > MemTxResult result = MEMTX_OK;
> > + int index;
> >
> > + switch (offset) {
> > + case GITS_CTLR:
> > + *data = s->ctlr;
> > + break;
> > + case GITS_IIDR:
> > + *data = gicv3_iidr();
> > + break;
> > + case GITS_IDREGS ... GITS_IDREGS + 0x2f:
> > + /* ID registers */
> > + *data = gicv3_idreg(offset - GITS_IDREGS);
> I am not sure those are the same as the gicv3
Yes they are, and consistent with the distributor,redistributor gicv3
idregs implementation too in qemu (as indicated in previous patch
review comments)
> on KVM we have
> case GITS_PIDR0:
> return 0x92; /* part number, bits[7:0] */
> case GITS_PIDR1:
> return 0xb4; /* part number, bits[11:8] */
> case GITS_PIDR2:
> return GIC_PIDR2_ARCH_GICv3 | 0x0b;
> case GITS_PIDR4:
> return 0x40; /* This is a 64K software visible
> page */
> /* The following are the ID registers for (any) GIC. */
> case GITS_CIDR0:
> return 0x0d;
> case GITS_CIDR1:
> return 0xf0;
> case GITS_CIDR2:
> return 0x05;
> case GITS_CIDR3:
> return 0xb1;
>
>
> > + break;
> > + case GITS_TYPER:
> > + *data = extract64(s->typer, 0, 32);
> > + break;
> > + case GITS_TYPER + 4:
> > + *data = extract64(s->typer, 32, 32);
> > + break;
> > + case GITS_CBASER:
> > + *data = extract64(s->cbaser, 0, 32);
> > + break;
> > + case GITS_CBASER + 4:
> > + *data = extract64(s->cbaser, 32, 32);
> > + break;
> > + case GITS_CREADR:
> > + *data = extract64(s->creadr, 0, 32);
> > + break;
> > + case GITS_CREADR + 4:
> > + *data = extract64(s->creadr, 32, 32);
> > + break;
> > + case GITS_CWRITER:
> > + *data = extract64(s->cwriter, 0, 32);
> > + break;
> > + case GITS_CWRITER + 4:
> > + *data = extract64(s->cwriter, 32, 32);
> > + break;
> > + case GITS_BASER ... GITS_BASER + 0x3f:
> > + index = (offset - GITS_BASER) / 8;
> > + if (offset & 7) {
> > + *data = extract64(s->baser[index], 32, 32);
> > + } else {
> > + *data = extract64(s->baser[index], 0, 32);
> > + }
> > + break;
> > + default:
> > + result = MEMTX_ERROR;
> > + break;
> > + }
> > return result;
> > }
> >
> > @@ -57,7 +322,42 @@ static MemTxResult its_writell(GICv3ITSState
> > *s, hwaddr offset,
> > uint64_t value, MemTxAttrs attrs)
> > {
> > MemTxResult result = MEMTX_OK;
> > + int index;
> >
> > + switch (offset) {
> > + case GITS_BASER ... GITS_BASER + 0x3f:
> > + /*
> > + * IMPDEF choice:- GITS_BASERn register becomes RO if ITS
> > is
> > + * already enabled
> > + */
> > + if (!(s->ctlr & ITS_CTLR_ENABLED)) {
> > + index = (offset - GITS_BASER) / 8;
> > + s->baser[index] |= (value & ~GITS_BASER_VAL_MASK);
> > + }
> > + break;
> > + case GITS_CBASER:
> > + /*
> > + * IMPDEF choice:- GITS_CBASER register becomes RO if ITS
> > is
> > + * already enabled
> > + */
> > + if (!(s->ctlr & ITS_CTLR_ENABLED)) {
> > + s->cbaser = value;
> s->creadr = 0;
> cwriter = creader?
Done
> > + }
> > + break;
> > + case GITS_CWRITER:
> > + s->cwriter = value & ~R_GITS_CWRITER_RETRY_MASK;
> > + break;
> > + case GITS_CREADR:
> RO if GICD_CTLR.DS = 0
> On KVM side the write access is implemented
Done
> > + case GITS_TYPER:
> > + /* RO registers, ignore the write */
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "%s: invalid guest write to RO register at
> > offset "
> > + TARGET_FMT_plx "\n", __func__, offset);
> > + break;
> > + default:
> > + result = MEMTX_ERROR;
> > + break;
> > + }
> > return result;
> > }
> >
> > @@ -65,7 +365,29 @@ static MemTxResult its_readll(GICv3ITSState *s,
> > hwaddr offset,
> > uint64_t *data, MemTxAttrs attrs)
> > {
> > MemTxResult result = MEMTX_OK;
> > + int index;
> >
> > + switch (offset) {
> > + case GITS_TYPER:
> > + *data = s->typer;
> > + break;
> > + case GITS_BASER ... GITS_BASER + 0x3f:
> > + index = (offset - GITS_BASER) / 8;
> > + *data = s->baser[index];
> > + break;
> > + case GITS_CBASER:
> > + *data = s->cbaser;
> > + break;
> > + case GITS_CREADR:
> > + *data = s->creadr;
> > + break;
> > + case GITS_CWRITER:
> > + *data = s->cwriter;
> > + break;
> > + default:
> > + result = MEMTX_ERROR;
> > + break;
> > + }
> > return result;
> > }
> >
> > @@ -162,6 +484,9 @@ static void gicv3_arm_its_realize(DeviceState
> > *dev, Error **errp)
> > gicv3_its_init_mmio(s, &gicv3_its_control_ops,
> > &gicv3_its_translation_ops);
> >
> > if (s->gicv3->cpu->gicr_typer & GICR_TYPER_PLPIS) {
> > + address_space_init(&s->gicv3->dma_as, s->gicv3->dma,
> > + "gicv3-its-sysmem");
> > +
> > /* set the ITS default features supported */
> > s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL,
> > GITS_TYPE_PHYSICAL);
> > @@ -208,6 +533,14 @@ static void gicv3_its_reset(DeviceState *dev)
> > }
> > }
> >
> > +static void gicv3_its_post_load(GICv3ITSState *s)
> > +{
> > + if (s->ctlr & ITS_CTLR_ENABLED) {
> > + extract_table_params(s);
> > + extract_cmdq_params(s);
> > + }
> > +}
> > +
> > static Property gicv3_its_props[] = {
> > DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-
> > gicv3",
> > GICv3State *),
> > @@ -218,10 +551,12 @@ static void gicv3_its_class_init(ObjectClass
> > *klass, void *data)
> > {
> > DeviceClass *dc = DEVICE_CLASS(klass);
> > GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass);
> > + GICv3ITSCommonClass *icc = ARM_GICV3_ITS_COMMON_CLASS(klass);
> >
> > dc->realize = gicv3_arm_its_realize;
> > device_class_set_props(dc, gicv3_its_props);
> > device_class_set_parent_reset(dc, gicv3_its_reset, &ic-
> > >parent_reset);
> > + icc->post_load = gicv3_its_post_load;
> > }
> >
> > static const TypeInfo gicv3_its_info = {
> > diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h
> > index e0b06930a7..d6aaa94e4c 100644
> > --- a/hw/intc/gicv3_internal.h
> > +++ b/hw/intc/gicv3_internal.h
> > @@ -238,7 +238,7 @@ FIELD(GITS_BASER, PAGESIZE, 8, 2)
> > FIELD(GITS_BASER, SHAREABILITY, 10, 2)
> > FIELD(GITS_BASER, PHYADDR, 12, 36)
> > FIELD(GITS_BASER, PHYADDRL_64K, 16, 32)
> > -FIELD(GITS_BASER, PHYADDRH_64K, 48, 4)
> > +FIELD(GITS_BASER, PHYADDRH_64K, 12, 4)
> > FIELD(GITS_BASER, ENTRYSIZE, 48, 5)
> > FIELD(GITS_BASER, OUTERCACHE, 53, 3)
> > FIELD(GITS_BASER, TYPE, 56, 3)
> > @@ -246,6 +246,17 @@ FIELD(GITS_BASER, INNERCACHE, 59, 3)
> > FIELD(GITS_BASER, INDIRECT, 62, 1)
> > FIELD(GITS_BASER, VALID, 63, 1)
> >
> > +FIELD(GITS_CBASER, SIZE, 0, 8)
> > +FIELD(GITS_CBASER, SHAREABILITY, 10, 2)
> > +FIELD(GITS_CBASER, PHYADDR, 12, 40)
> > +FIELD(GITS_CBASER, OUTERCACHE, 53, 3)
> > +FIELD(GITS_CBASER, INNERCACHE, 59, 3)
> > +FIELD(GITS_CBASER, VALID, 63, 1)
> > +
> > +FIELD(GITS_CWRITER, RETRY, 0, 1)
> > +FIELD(GITS_CWRITER, OFFSET, 5, 15)
> > +
> > +FIELD(GITS_CTLR, ENABLED, 0, 1)
> > FIELD(GITS_CTLR, QUIESCENT, 31, 1)
> >
> > FIELD(GITS_TYPER, PHYSICAL, 0, 1)
> > @@ -257,6 +268,13 @@ FIELD(GITS_TYPER, PTA, 19, 1)
> > FIELD(GITS_TYPER, CIDBITS, 32, 4)
> > FIELD(GITS_TYPER, CIL, 36, 1)
> >
> > +#define GITS_IDREGS 0xFFD0
> > +
> > +#define ITS_CTLR_ENABLED (1U) /* ITS Enabled */
> > +
> > +#define
> > GITS_BASER_VAL_MASK (R_GITS_BASER_ENTRYSIZE_MASK |
> > \
> > + R_GITS_BASER_TYPE_MA
> > SK)
> > +
> > #define GITS_BASER_PAGESIZE_4K 0
> > #define GITS_BASER_PAGESIZE_16K 1
> > #define GITS_BASER_PAGESIZE_64K 2
> > @@ -264,6 +282,14 @@ FIELD(GITS_TYPER, CIL, 36, 1)
> > #define GITS_ITT_TYPE_DEVICE 1ULL
> > #define GITS_ITT_TYPE_COLLECTION 4ULL
> >
> > +#define GITS_ITT_PAGE_SIZE_0 0x1000
> > +#define GITS_ITT_PAGE_SIZE_1 0x4000
> > +#define GITS_ITT_PAGE_SIZE_2 0x10000
> Why not naming _4K 16K 64K instead of _0, 1, 2?
Done,as indicated above
> > +
> > +#define L1TABLE_ENTRY_SIZE 8
> > +
> > +#define GITS_CMDQ_ENTRY_SIZE 32
> > +
> > /**
> > * Default features advertised by this version of ITS
> > */
> > diff --git a/include/hw/intc/arm_gicv3_common.h
> > b/include/hw/intc/arm_gicv3_common.h
> > index 91491a2f66..1fd5cedbbd 100644
> > --- a/include/hw/intc/arm_gicv3_common.h
> > +++ b/include/hw/intc/arm_gicv3_common.h
> > @@ -226,6 +226,9 @@ struct GICv3State {
> > int dev_fd; /* kvm device fd if backed by kvm vgic support */
> > Error *migration_blocker;
> >
> > + MemoryRegion *dma;
> > + AddressSpace dma_as;
> > +
> > /* Distributor */
> >
> > /* for a GIC with the security extensions the NS banked
> > version of this
> > diff --git a/include/hw/intc/arm_gicv3_its_common.h
> > b/include/hw/intc/arm_gicv3_its_common.h
> > index 65d1191db1..78b1ba7e6b 100644
> > --- a/include/hw/intc/arm_gicv3_its_common.h
> > +++ b/include/hw/intc/arm_gicv3_its_common.h
> > @@ -41,6 +41,32 @@
> >
> > #define GITS_TRANSLATER 0x0040
> >
> > +typedef struct {
> > + bool valid;
> > + bool indirect;
> > + uint16_t entry_sz;
> > + uint32_t page_sz;
> > + uint32_t max_entries;
> > + uint32_t max_devids;
> > + uint64_t base_addr;
> > +} DevTableDesc;
> > +
> > +typedef struct {
> > + bool valid;
> > + bool indirect;
> > + uint16_t entry_sz;
> > + uint32_t page_sz;
> > + uint32_t max_entries;
> > + uint32_t max_collids;
> > + uint64_t base_addr;
> > +} CollTableDesc;
> > +
> > +typedef struct {
> > + bool valid;
> > + uint32_t max_entries;
> > + uint64_t base_addr;
> > +} CmdQDesc;> +
> > struct GICv3ITSState {
> > SysBusDevice parent_obj;
> >
> > @@ -63,6 +89,10 @@ struct GICv3ITSState {
> > uint64_t creadr;
> > uint64_t baser[8];
> >
> > + DevTableDesc dt;
> > + CollTableDesc ct;
> > + CmdQDesc cq;
> > +
> > Error *migration_blocker;
> > };
> Thanks
>
> Eric
> >
> >
[PATCH v4 3/8] hw/intc: GICv3 ITS command queue framework, Shashi Mallela, 2021/06/02
Re: [PATCH v4 3/8] hw/intc: GICv3 ITS command queue framework, Eric Auger, 2021/06/13