[PULL 12/14] pckbd: remove duplicated keyboard and mouse defines

[Gerd Hoffmann]

From: Volker Rümelin <vr_qemu@t-online.de>

In 2005 the author of commit daa579632d "PS2 mouse and keyboard
separation (Paul Brook)" and 0e43e99c04 "PS2 mouse and keyboard
separation (Paul Brook)" separated the PS/2 controller code and
the PS/2 keyboard and mouse code. It seems he forgot to remove
a few defines. Remove them now.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/input/pckbd.c | 37 -------------------------------------
 1 file changed, 37 deletions(-)

diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c
index e73bc8181cff..de867abc06b7 100644
--- a/hw/input/pckbd.c
+++ b/hw/input/pckbd.c
@@ -62,21 +62,6 @@
 #define KBD_CCMD_RESET          0xFE    /* Pulse bit 0 of the output port P2 = 
CPU reset. */
 #define KBD_CCMD_NO_OP          0xFF    /* Pulse no bits of the output port 
P2. */
 
-/* Keyboard Commands */
-#define KBD_CMD_SET_LEDS       0xED    /* Set keyboard leds */
-#define KBD_CMD_ECHO           0xEE
-#define KBD_CMD_GET_ID                 0xF2    /* get keyboard ID */
-#define KBD_CMD_SET_RATE       0xF3    /* Set typematic rate */
-#define KBD_CMD_ENABLE         0xF4    /* Enable scanning */
-#define KBD_CMD_RESET_DISABLE  0xF5    /* reset and disable scanning */
-#define KBD_CMD_RESET_ENABLE           0xF6    /* reset and enable scanning */
-#define KBD_CMD_RESET          0xFF    /* Reset */
-
-/* Keyboard Replies */
-#define KBD_REPLY_POR          0xAA    /* Power on reset */
-#define KBD_REPLY_ACK          0xFA    /* Command ACK */
-#define KBD_REPLY_RESEND       0xFE    /* Command NACK, send the cmd again */
-
 /* Status Register Bits */
 #define KBD_STAT_OBF           0x01    /* Keyboard output buffer full */
 #define KBD_STAT_IBF           0x02    /* Keyboard input buffer full */
@@ -109,28 +94,6 @@
  */
 #define KBD_OUT_ONES            0xcc
 
-/* Mouse Commands */
-#define AUX_SET_SCALE11                0xE6    /* Set 1:1 scaling */
-#define AUX_SET_SCALE21                0xE7    /* Set 2:1 scaling */
-#define AUX_SET_RES            0xE8    /* Set resolution */
-#define AUX_GET_SCALE          0xE9    /* Get scaling factor */
-#define AUX_SET_STREAM         0xEA    /* Set stream mode */
-#define AUX_POLL               0xEB    /* Poll */
-#define AUX_RESET_WRAP         0xEC    /* Reset wrap mode */
-#define AUX_SET_WRAP           0xEE    /* Set wrap mode */
-#define AUX_SET_REMOTE         0xF0    /* Set remote mode */
-#define AUX_GET_TYPE           0xF2    /* Get type */
-#define AUX_SET_SAMPLE         0xF3    /* Set sample rate */
-#define AUX_ENABLE_DEV         0xF4    /* Enable aux device */
-#define AUX_DISABLE_DEV                0xF5    /* Disable aux device */
-#define AUX_SET_DEFAULT                0xF6
-#define AUX_RESET              0xFF    /* Reset aux device */
-#define AUX_ACK                        0xFA    /* Command byte ACK. */
-
-#define MOUSE_STATUS_REMOTE     0x40
-#define MOUSE_STATUS_ENABLED    0x20
-#define MOUSE_STATUS_SCALE21    0x10
-
 #define KBD_PENDING_KBD_COMPAT  0x01
 #define KBD_PENDING_AUX_COMPAT  0x02
 #define KBD_PENDING_CTRL_KBD    0x04
-- 
2.31.1