Re: [PATCH v5 5/5] virtiofsd: Switch creds, drop FSETID for system.posix_acl_access xattr

[Vivek Goyal]

On Mon, Mar 29, 2021 at 04:35:57PM +0100, Luis Henriques wrote:
> On Thu, Mar 25, 2021 at 11:38:52AM -0400, Vivek Goyal wrote:
> > When posix access acls are set on a file, it can lead to adjusting file
> > permissions (mode) as well. If caller does not have CAP_FSETID and it
> > also does not have membership of owner group, this will lead to clearing
> > SGID bit in mode.
> > 
> > Current fuse code is written in such a way that it expects file server
> > to take care of chaning file mode (permission), if there is a need.
> > Right now, host kernel does not clear SGID bit because virtiofsd is
> > running as root and has CAP_FSETID. For host kernel to clear SGID,
> > virtiofsd need to switch to gid of caller in guest and also drop
> > CAP_FSETID (if caller did not have it to begin with).
> > 
> > If SGID needs to be cleared, client will set the flag
> > FUSE_SETXATTR_ACL_KILL_SGID in setxattr request. In that case server
> > should kill sgid.
> > 
> > Currently just switch to uid/gid of the caller and drop CAP_FSETID
> > and that should do it.
> > 
> > This should fix the xfstest generic/375 test case.
> > 
> > We don't have to switch uid for this to work. That could be one optimization
> > that pass a parameter to lo_change_cred() to only switch gid and not uid.
> > 
> > Also this will not work whenever (if ever) we support idmapped mounts. In
> > that case it is possible that uid/gid in request are 0/0 but still we
> > need to clear SGID. So we will have to pick a non-root sgid and switch
> > to that instead. That's an TODO item for future when idmapped mount
> > support is introduced.
> > 
> > Reported-by: Luis Henriques <lhenriques@suse.de>
> > Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
> > ---
> >  include/standard-headers/linux/fuse.h |  7 +++++
> >  tools/virtiofsd/passthrough_ll.c      | 42 +++++++++++++++++++++++++--
> >  2 files changed, 47 insertions(+), 2 deletions(-)
> > 
> > diff --git a/include/standard-headers/linux/fuse.h 
> > b/include/standard-headers/linux/fuse.h
> > index cc87ff27d0..4eb79399d4 100644
> > --- a/include/standard-headers/linux/fuse.h
> > +++ b/include/standard-headers/linux/fuse.h
> > @@ -180,6 +180,7 @@
> >   *  - add FUSE_HANDLE_KILLPRIV_V2, FUSE_WRITE_KILL_SUIDGID, 
> > FATTR_KILL_SUIDGID
> >   *  - add FUSE_OPEN_KILL_SUIDGID
> >   *  - add FUSE_SETXATTR_V2
> > + *  - add FUSE_SETXATTR_ACL_KILL_SGID
> >   */
> >  
> >  #ifndef _LINUX_FUSE_H
> > @@ -450,6 +451,12 @@ struct fuse_file_lock {
> >   */
> >  #define FUSE_OPEN_KILL_SUIDGID     (1 << 0)
> >  
> > +/**
> > + * setxattr flags
> > + * FUSE_SETXATTR_ACL_KILL_SGID: Clear SGID when system.posix_acl_access is 
> > set
> > + */
> > +#define FUSE_SETXATTR_ACL_KILL_SGID    (1 << 0)
> > +
> >  enum fuse_opcode {
> >     FUSE_LOOKUP             = 1,
> >     FUSE_FORGET             = 2,  /* no reply */
> > diff --git a/tools/virtiofsd/passthrough_ll.c 
> > b/tools/virtiofsd/passthrough_ll.c
> > index 3f5c267604..8a48071d0b 100644
> > --- a/tools/virtiofsd/passthrough_ll.c
> > +++ b/tools/virtiofsd/passthrough_ll.c
> > @@ -175,7 +175,7 @@ struct lo_data {
> >      int user_killpriv_v2, killpriv_v2;
> >      /* If set, virtiofsd is responsible for setting umask during creation 
> > */
> >      bool change_umask;
> > -    int user_posix_acl;
> > +    int user_posix_acl, posix_acl;
> >  };
> >  
> >  static const struct fuse_opt lo_opts[] = {
> > @@ -716,8 +716,10 @@ static void lo_init(void *userdata, struct 
> > fuse_conn_info *conn)
> >           * in fuse_lowlevel.c
> >           */
> >          fuse_log(FUSE_LOG_DEBUG, "lo_init: enabling posix acl\n");
> > -        conn->want |= FUSE_CAP_POSIX_ACL | FUSE_CAP_DONT_MASK;
> > +        conn->want |= FUSE_CAP_POSIX_ACL | FUSE_CAP_DONT_MASK |
> > +                      FUSE_CAP_SETXATTR_V2;
> 
> An annoying thing with this is that if we're using a kernel without
> _V2 support the mount will still succeed.  But we'll see:
> 
> ls: cannot access '/mnt': Connection refused
> 
> and in the userspace:
> 
> fuse: error: filesystem requested capabilities 0x20000000 that are not 
> supported by kernel, aborting.
> 
> Maybe it would be worth to automatically disable acl support if this
> happens (with an error message) but still allow the filesystem to be
> used.

If user specific "-o posix_acl" then it is better to fail explicitly
if posix_acl can't be enabled. If user did not specify anything, then
it makes sense to automatically disable posix acl  and continue.

> Or, which is probably better, to handle the EPROTO error in the
> kernel during mount.

This will have been idea but in fuse, init process handling happens
asynchronously. That is mount returns to user space while init
command might complete at a later point of time. So can't return
-EPROTO at mount time.

So one of the problems seem to be that error message is not very
clear. How about adding following so that user is clear that posix acl
can't be enabled.

Vivek

---
 tools/virtiofsd/passthrough_ll.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

Index: rhvgoyal-qemu/tools/virtiofsd/passthrough_ll.c
===================================================================
--- rhvgoyal-qemu.orig/tools/virtiofsd/passthrough_ll.c 2021-03-29 
14:59:28.483340964 -0400
+++ rhvgoyal-qemu/tools/virtiofsd/passthrough_ll.c      2021-03-29 
15:42:21.797482846 -0400
@@ -712,10 +712,18 @@ static void lo_init(void *userdata, stru
     if (lo->user_posix_acl == 1) {
         /*
          * User explicitly asked for this option. Enable it unconditionally.
-         * If connection does not have this capability, it should fail
-         * in fuse_lowlevel.c
+         * If connection does not have this capability, give out message
+         * now. fuse_lowlevel.c will error out.
          */
-        fuse_log(FUSE_LOG_DEBUG, "lo_init: enabling posix acl\n");
+        if (!(conn->capable & FUSE_CAP_POSIX_ACL) ||
+            !(conn->capable & FUSE_CAP_DONT_MASK) ||
+            !(conn->capable & FUSE_CAP_SETXATTR_V2)) {
+            fuse_log(FUSE_LOG_ERR, "lo_init: Can not enable posix acl."
+                     " kernel does not support FUSE_POSIX_ACL, FUSE_DONT_MASK"
+                     " or FUSE_SETXATTR_V2 capability.\n");
+        } else {
+            fuse_log(FUSE_LOG_DEBUG, "lo_init: enabling posix acl\n");
+        }
         conn->want |= FUSE_CAP_POSIX_ACL | FUSE_CAP_DONT_MASK |
                       FUSE_CAP_SETXATTR_V2;
         lo->change_umask = true;