[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 0/1] hw/block/m25p80: Fix Numonyx flash dummy cycle register b
From: |
Joe Komlodi |
Subject: |
[PATCH v2 0/1] hw/block/m25p80: Fix Numonyx flash dummy cycle register behavior |
Date: |
Tue, 27 Oct 2020 16:43:39 -0700 |
Changelog:
v1 -> v2
- 1/2: Change function name to be more accurate
- 2/2: Dropped
Hi all,
The series fixes the behavior of the dummy cycle register for Numonyx flashes so
it's closer to how hardware behaves.
On hardware, the dummy cycles for fast read commands are set to a specific value
(8 or 10) if the register is all 0s or 1s.
If the register value isn't all 0s or 1s, then the flash expects the amount of
cycles sent to be equal to the count in the register.
Thanks!
Joe
Joe Komlodi (1):
hw/block/m25p80: Fix Numonyx fast read dummy cycle count
hw/block/m25p80.c | 26 +++++++++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)
--
2.7.4
- [PATCH v2 0/1] hw/block/m25p80: Fix Numonyx flash dummy cycle register behavior,
Joe Komlodi <=