qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 12/20] hw/rx/rx62n: Use New SCI module.


From: Philippe Mathieu-Daudé
Subject: Re: [PATCH 12/20] hw/rx/rx62n: Use New SCI module.
Date: Sun, 25 Oct 2020 02:33:09 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.3.1

On 8/27/20 2:38 PM, Yoshinori Sato wrote:
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
  include/hw/rx/rx62n.h | 2 +-
  hw/rx/rx62n.c         | 7 ++++++-
  2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/include/hw/rx/rx62n.h b/include/hw/rx/rx62n.h
index 1182ca24de..f463148799 100644
--- a/include/hw/rx/rx62n.h
+++ b/include/hw/rx/rx62n.h
@@ -70,7 +70,7 @@ typedef struct RX62NState {
      RXICUState icu;
      RenesasTMR8State tmr[RX62N_NR_TMR];
      RenesasCMTState cmt[RX62N_NR_CMT];
-    RSCIState sci[RX62N_NR_SCI];
+    RSCIAState sci[RX62N_NR_SCI];
      RX62NCPGState cpg;
MemoryRegion *sysmem;
diff --git a/hw/rx/rx62n.c b/hw/rx/rx62n.c
index 0223396110..f61383a4c2 100644
--- a/hw/rx/rx62n.c
+++ b/hw/rx/rx62n.c
@@ -191,11 +191,13 @@ static void register_sci(RX62NState *s, int unit)
  {
      SysBusDevice *sci;
      int i, irqbase;
+    char ckname[16];
object_initialize_child(OBJECT(s), "sci[*]",
-                            &s->sci[unit], TYPE_RENESAS_SCI);
+                            &s->sci[unit], TYPE_RENESAS_SCIA);
      sci = SYS_BUS_DEVICE(&s->sci[unit]);
      qdev_prop_set_chr(DEVICE(sci), "chardev", serial_hd(unit));
+    qdev_prop_set_uint32(DEVICE(sci), "unit", unit);
      sysbus_realize(sci, &error_abort);
irqbase = RX62N_SCI_IRQ + SCI_NR_IRQ * unit;
@@ -203,6 +205,9 @@ static void register_sci(RX62NState *s, int unit)
          sysbus_connect_irq(sci, i, s->irq[irqbase + i]);
      }
      sysbus_mmio_map(sci, 0, RX62N_SCI_BASE + unit * 0x08);
+    snprintf(ckname, sizeof(ckname), "pck_sci-%d", unit);
+    qdev_connect_clock_in(DEVICE(sci), "pck",
+                          qdev_get_clock_out(DEVICE(&s->cpg), ckname));
  }
static void register_cpg(RX62NState *s)


This makes the test_linux_sash test timeout:

$ avocado --show=app,console run -t arch:rx  tests/acceptance/
Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash Fetching asset from tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash
JOB ID     : 932d3a7a15be19e0d9772705d69d5b815793b1d3
JOB LOG : /home/phil/avocado/job-results/job-2020-10-25T02.18-932d3a7/job.log (1/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_uboot: console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
PASS (0.11 s)
(2/2) tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash: console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on.  Total pages: 8128
console: Kernel command line:
console: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
console: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
console: Memory: 14648K/32768K available (871K kernel code, 95K rwdata, 140K rodata, 96K init, 175K bss, 18120K reserved, 0K cma-reserved)
console: NR_IRQS: 256
console: rx-cmt: used for periodic clock events
console: clocksource: rx-tpu: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1274173631191 ns
console: 96.00 BogoMIPS (lpj=480000)
console: pid_max: default: 4096 minimum: 301
console: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
console: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
console: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
console: clocksource: Switched to clocksource rx-tpu
console: workingset: timestamp_bits=30 max_order=12 bucket_order=0
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci
console: random: get_random_bytes called from 0x01002e48 with crng_init=0
console: Freeing unused kernel memory: 96K
console: This architecture does not have kernel memory protection.
console: Run /sbin/init as init process
console: Run /etc/init as init process
console: Run /bin/init as init process
console: Run /bin/sh as init process
\console: random: fast init done
INTERRUPTED: Test interrupted by SIGTERM\nRunner error occurred: Timeout reached\nOriginal status: ERROR\n{'name': '2-tests/acceptance/machine_rx_gdbsim.py:RxGdbSimMachine.test_linux_sash', 'logdir': '/home/phil/avocado/job-results/job-2020-10-25T02.18-932d3a7/test-resul... (30.23 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 1 | CANCEL 0
JOB TIME   : 30.73 s




reply via email to

[Prev in Thread] Current Thread [Next in Thread]